The installation cannot continue because some of the processes are running.  Installation failed

Similar Questions

• "SQL Server 2005 Setup cannot continue because the installation package could not be opened."

  Hi, I use a 64 bit OS on my computer and I have a problem. AdminStudio gives an error message when running this program.

  "SQL Server 2005 Setup cannot continue because the installation package could not be opened. The installation package has a missing file, or you run a single installer 32 bit on a 64-bit computer. To continue, verify the SQL Server 2005, you use the package is supported on WOW64. If you are sure that you are running a SQL Server 2005 supported packages, and you continue to see this message, contact the vendor of the application. »

  What can I do about?

  Thank you!

  Hello again,

  Thanks, I solved this problem. This program installs 32-bit as the default value in the path of the folder. This is why it does not work when everyone works beginning... But there is a solution for this topic...

  Exactly the solution:

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=22625

  Note:

  SQLEXPR32. EXE is a smaller package that can be used to install SQL Server Express on 32-bit operating systems only.

  The larger SQLEXPR. EXE package supports installation on 32-bit and 64-bit operating systems (WOW install).

• Try to install the software and I get an error message saying that the installation cannot continue because a previous installation requires your computer needs to be restarted.

  Original title: .net framework 4.6

  I try to install the software and I get an error message saying

  Setup cannot continue because a previous installation requires your computer must be restarted. Restart your computer and run the Setup again.

  so I restart my pc and run it again and the same message appears

  Try to perform a "clean boot" to start Windows by using a minimal set of drivers and startup programs. This will eliminate software conflicts that occur when you start Windows, install a program or an update or when you run a program in Windows.
  http://support.Microsoft.com/kb/929135

  Perform a clean boot to determine if background programs are interfering with your game or other programs
  http://support.Microsoft.com/kb/331796

  One by one add back an application both in the boot list to find the software application incriminated.

  J W Stuart: http://www.pagestart.com

• Restart fails. Error message: The Finder cannot quit because some operations are still ongoing.

  Unable to shut down or restart. Dialog box shows "The Finder cannot quit because some operations are still ongoing." I'm unable to find it than those who are. Ran disk utility and tried again with the same result. Sure would appreciate your help!

  My MacBook is a 13-inch aluminum, late 2008, Running OS X 10.11.3

  System report:

  Presentation of the material:

  Model name: MacBook

  Model ID: MacBook5, 1

  Processor name: Intel Core 2 Duo

  Processor speed: 2.4 GHz

  Number of processors: 1

  Total number of cores: 2

  L2 Cache: 3 MB

  Memory: 4 GB

  Bus speed: 1.07 GHz

  Boot ROM version: MB51.007D.B03

  Version of the SCM (System): 1.40f2

  Serial number (System): W8919BPH8QT

  Material UUID: 64CA23AE-66AA-510A-9A68-95E35F1AC9F5

  Motion sensor sudden:

  Status: enabled

  Sudden

  At ran Etrecheck, with the report as follows:

  EtreCheck version: 2.9.3 (253)

  Report generated 2016-02-11 14:08:26

  Download EtreCheck from http://etrecheck.com

  Duration 09:27

  Performance: Below average

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Click on the link [check files] help with unknown files.

  Could not complete the following internal tasks:

  / usr/sbin/system_profiler - xml SPUSBDataType

  Problem: Another problem

  Description:

  Unable to restart or shut down. Error message indicates the operation is running, but I don't know what it is.

  Hardware Information: ⓘ

  MacBook (13-inch, aluminum, late 2008)

  [Data sheet] - [User Guide] - [Warranty & Service]

  MacBook - model: MacBook5, 1

  1 2.4 GHz Intel Core 2 Duo CPU: 2 strands

  4 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 2 GB DDR3 1067 MHz

  0/DIMM1 BANK

  OK 2 GB DDR3 1067 MHz

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 161 - SN = W024902CY6GOA

  Video information: ⓘ

  NVIDIA GeForce 9400M - VRAM: 256 MB

  Color LCD 1280 x 800

  Software: ⓘ

  OS X El Capitan 10.11.3 (15 d 21) - time since started: about 7 days

  Disc information: ⓘ

  TOSHIBA MK2553GSX disk0: (250,06 GB) (rotation)

  EFI (disk0s1) : 210 MB

  Macintosh HD (disk0s2) /: 249,20 go-go (174,22 free)

  HD (disk0s3) [recovery] recovery: 650 MB

  MATSHITADVD-R UJ-868)

  Configuration files: ⓘ

  / etc/hosts - Count: 1

  Guardian: ⓘ

  Mac App Store and identified developers

  Unknown files: ⓘ

  / Library/LaunchDaemons/com. Starfield.backupservice.plist

  ~/Library/LaunchAgents/com. LogMeIn.Cubby.Updater.plist

  ~/Library/LaunchAgents/com. MLBAM.nexdef.plist

  ~/Library/LaunchAgents/join.me.Launcher.update.PerUser.plist

  4 unknown files found. [Check files]

  Kernel extensions: ⓘ

  /Applications/transmit.app

  com.panic.TransmitDisk.transmitdiskfs [no charge] (4.0.0 - 10.5 SDK) [Support]

  / Library/Extensions

  com.seagate.driver.PowSecDriverCore [no charge] (5.2.7 - 10.4 SDK) [Support]

  [loading] com.squirrels.airparrot.framebuffer (5 - 10.10 SDK) [Support]

  [loading] com.squirrels.driver.AirParrotSpeakers (1.8-10.8 SDK) [Support]

  / Library/Extensions/Seagate storage Driver.kext/Contents/PlugIns

  com.seagate.driver.PowSecLeafDriver_10_4 [no charge] (5.2.7 - 10.4 SDK) [Support]

  com.seagate.driver.PowSecLeafDriver_10_5 [no charge] (5.2.7 - 10.5 SDK) [Support]

  com.seagate.driver.SeagateDriveIcons [no charge] (5.2.7 - 10.4 SDK) [Support]

  / System/Library/Extensions

  [no charge] com.tomtom.driver.UsbEthernetGadget (1.0.0d1) [Support]

  Launch system officers: ⓘ

  com.apple.AssetCacheLocatorService.plist [killed]

  com.apple.CallHistoryPluginHelper.plist [killed]

  com.apple.CallHistorySyncHelper.plist [killed]

  com.apple.FolderActionsDispatcher.plist [killed]

  com.Apple.CDPD.plist [killed]

  com.Apple.cloudphotosd.plist [killed]

  com.Apple.followupd.plist [killed]

  com.Apple.gamed.plist [killed]

  com.Apple.icloud.fmfd.plist [killed]

  com.Apple.printtool.agent.plist [killed]

  com.Apple.RCD.plist [killed]

  com.Apple.rtcreportingd.plist [killed]

  com.Apple.scopedbookmarkagent.XPC.plist [killed]

  com.Apple.telephonyutilities.callservicesd.plist [killed]

  [loading] 151 tasks Apple

  [operation] 71 tasks Apple

  14 killed process lack of RAM

  Launch system demons: ⓘ

  com.apple.AssetCacheLocatorService.plist [killed]

  com.apple.GSSCred.plist [killed]

  com.Apple.awdd.plist [killed]

  com.Apple.Emond.aslmanager.plist [killed]

  com.Apple.ifdreader.plist [killed]

  [killed] com.apple.periodic - weekly.plist

  com.Apple.softwareupdate_download_service.plist [killed]

  com.Apple.system_installd.plist [killed]

  com.Apple.wdhelper.plist [killed]

  com.Apple.XPC.SMD.plist [killed]

  [loading] 191 tasks Apple

  [operation] 86 tasks Apple

  10 killed process lack of RAM

  Launch officers: ⓘ

  [failure]... com.adobe.ARMDCHelper.cc24aef4a1b90ed56a [Support] plist

  [loading] com.google.keystone.agent.plist [Support]

  [loading] com.oracle.java.Java - Updater.plist [Support]

  com.TeamViewer.TeamViewer.plist [failure] [support] [details]

  [failure] com.teamviewer.teamviewer_desktop.plist [Support]

  [loading] org.macosforge.xquartz.startx.plist [Support]

  Launch demons: ⓘ

  [loading] com.adobe.ARMDC.Communicator.plist [Support]

  [loading] com.adobe.ARMDC.SMJobBlessHelper.plist [Support]

  [failure] com.adobe.fpsaud.plist [Support]

  [operation] com.backblaze.bzserv.plist [Support]

  [loading] com.barebones.authd.plist [Support]

  [loading] com.ciscosystems.ciscoconnect.daemon.plist [Support]

  [loading] com.google.keystone.daemon.plist [Support]

  [loading] com.logmein.join.me.update - helper.plist [Support]

  [loading] com.microsoft.office.licensing.helper.plist [Support]

  [loading] com.oracle.java.Helper - Tool.plist [Support]

  [operation] com.seagate.TBDecorator.plist [Support]

  [operation] com.starfield.backupservice.plist [Support]

  [loading] com.teamviewer.Helper.plist [Support]

  [failure] com.teamviewer.teamviewer_service.plist [Support]

  [failure] com.vmware.launchd.vmware.plist [Support]

  [loading] org.macosforge.xquartz.privileged_startx.plist [Support]

  User launch officers: ⓘ

  [failure] com.adobe.ARM. [...]. plist [Support]

  [operation] com.amazon.music.plist [Support]

  [operation] com.backblaze.bzbmenu.plist [Support]

  [loading] com.citrixonline.GoToMeeting.G2MUpdate.plist [Support]

  [loading] com.logmein.cubby.updater.plist [Support]

  [operation] com.mlbam.nexdef.plist [Support]

  [operation] com.seagate.dashboard.plist [Support]

  [loading] join.me.launcher.update.peruser.plist [Support]

  Items in user login: ⓘ

  Dashlane Application (/ Applications/Dashlane.app)

  Agent application RealPlayer Downloader (~/Library/Application Support/RealNetworks/RealPlayer Downloader Agent.app)

  Degree application (/ Applications/Degrees.app)

  Sophos Anti-virus UNKNOWN (missing value)

  MacUpdate desktop hidden UNKNOWN (missing value)

  Dropbox application (/ Applications/Dropbox.app)

  Join.me Application Launcher (~/Library/Application Support/join.me/join.me Launcher.app)

  HP Scheduler application (/ Library/Application Support/Hewlett Packard/Software Update/HP Scheduler.app)

  HP product search request (/ Library/Application Support/Hewlett-Packard/Customer Participation/HP product Research.app)

  HPEventHandler UNKNOWN (missing value)

  Other applications: ⓘ

  [ongoing] at.appscape.degrees.24352

  [ongoing] com.Apple.XPC.launchd.oneshot.0x1000000a.EvernoteHelper

  [ongoing] com.Apple.XPC.launchd.oneshot.0x1000001f.EtreCheck

  [ongoing] com.dashlane.DashlaneAgent

  com.evernote.Evernote.25952 [loading]

  com.evernote.EvernoteHelper [loading]

  [ongoing] com.getdropbox.dropbox.25312

  [ongoing] com.LogMeIn.join.me.Launcher.167712

  [ongoing] com.RealNetworks.realplayerdownloaderagent.95072

  [ongoing] JP.co.Canon.cijscannerregister.2272

  Plug-ins Internet: ⓘ

  o1dbrowserplugin: Version: 5.41.3.0 - SDK 10.8 [Support]

  Web of Google Earth plugin: Version: 6.0 [Support]

  Default browser: Version: 601 - SDK 10.11

  Flip4Mac WMV Plugin: Version: 2.4.0.11 [Support]

  AmazonMP3DownloaderPlugin101750: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 [Support]

  RealPlayer Plugin: Version: unknown [Support]

  AdobePDFViewerNPAPI: Version: 15.010.20056 - SDK 10.8 [Support]

  FlashPlayer - 10.6: Version: 20.0.0.267 - SDK 10.6 [Support]

  Silverlight: Version: 5.1.41212.0 - SDK 10.6 [Support]

  QuickTime Plugin: Version: 7.7.3

  Flash Player: Version: 20.0.0.267 - SDK 10.6 obsolete! Update

  googletalkbrowserplugin: Version: 5.41.3.0 - SDK 10.8 [Support]

  iPhotoPhotocast: Version: 7.0

  AdobePDFViewer: Version: 15.010.20056 - SDK 10.8 [Support]

  SharePointBrowserPlugin: Version: 14.6.0 - SDK 10.6 [Support]

  JavaAppletPlugin: Version: 8 73 02 check the version build update Java

  User Plug-ins internet: ⓘ

  WbeTools64_14: Version: 1.0.22.49 © 2012 - SDK 10.6 [Support]

  WebEx64: Version: 1.0 - SDK 10.6 [Support]

  CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Support]

  fileEditTool64_15: Version: 1.0.35.65 © 2013 - 10.6 SDK [Support]

  FreeScreenSharingPlugin: Version: Unknown - SDK 10.9 [Support]

  Safari extensions: ⓘ

  AdBlock

  Add to the list of Amazon gift

  Awesome screenshot

  Dashlane

  CLEA. Video Nr

  EverNote Web Clipper

  3rd party preference panes: ⓘ

  Backblaze backup [Support]

  Flash Player [Support]

  Flip4Mac WMV [Support]

  Growl [Support]

  Java [Support]

  MacFUSE [Support]

  For Mac OSX [Support] Seagate dashboard

  Time Machine: ⓘ

  Skip system files: No.

  Mobile backups: WE

  Automatic backup: YES

  Volumes to back up:

  Macintosh HD: Disc size: 249,20 GB disc used: 74,98 GB

  Destinations:

  Backup drive Seagate Plus [Local]

  Total size: 999,86 GB

  Total number of backups: 6

  An older backup: 10/22/15, 12:25

  Last backup: 19/01/16, 21:00

  Size of backup drive: Excellent

  Backup size GB 999,86 > (disk size 249,20 GB X 3)

  Top of page process CPU: ⓘ

  3% WindowServer

  1% kernel_task

  1% com.apple.WebKit.WebContent (7)

  Download RealPlayer 1% agent

  1% com.dashlane.DashlaneAgent

  Top of page process of memory: ⓘ

  647 MB com.apple.WebKit.WebContent (7)

  572 MB kernel_task

  233 MB mdworker (17)

  Safari of 201 MB

  DashlanePluginService 139 MB

  Virtual memory information: ⓘ

  75 MB of free RAM

  4.18 GB used RAM (903 MB cache)

  192 MB of Swap used

  Diagnostic information: ⓘ

  February 9, 2016, 15:36:32 ~/Library/Logs/DiagnosticReports/findNames_2016-02-09-153632_[redacted].crash

  com.apple.AppleSpell - /System/Library/Services/AppleSpell.service/Contents/MacOS/findNames

  Can you press and hold the button of power may be up to 30 seconds to ensure the

  computer is not simply put to sleep; you want him to stop. Then the attempt to start so he could

  run in safe mode, you can troubleshoot and try to check in the system as suggested:

  • Try safe mode if your Mac does not end commissioning - Apple Support

  Additional links to other content that may be useful to solve problems are included in the above page.

  Another element is Force Quit... it can be used to quit the finder:

  • Force an app to close on your Mac - Apple Support

  You may be able to use keyboard shortcuts in start to see on other actions at startup; as

  attempts to use modes of recovery for other restorative actions, repair permissions, etc. or for

  reinstall OS X again. If you have a backup of your content and also a Time Machine backup.

  There is a good reason to suggest that you could restore the computer to a viable State in front

  These symptoms or problems became so large. The test of original material would be on

  it comes with the installation of restore Apple DVD set than computers. Maybe it's worth a go, too.

  • For Mac - Apple Support startup key combinations

  • With the help of Apple Hardware Test - Apple Support

  • Apple OS X and Time Machine tips:

  http://pondini.org/OSX/home.html

  • OS X: on OS X Recovery - Apple Support

  {Some newer models may have been updated to use the Internet recovery to restart the computer}

  online system - if the internal drive and its recovery partition missing somehow to any system start-up.

  The model seems to be too old for the Constitution or upgrade to make use of this feature, however...}

  If you have an external drive with a clone of the complete system on board, which could be used to test

  and troubleshooting of the material aspect of the computer; and a source for new offline installation clone.

  Perhaps the 'the etrecheck guy' will examine in this thread and point out some details that I'm not very familiar.

  Good luck in this case!

• Error: "Setup cannot continue because you are not connected to the internet or the server is unavailable" with install LifeCam

  Original title: Microsoft LifeCam VX-3000 installation problems

  On the insertion of the CD, I get an error message that says:

  "Setup cannot continue because you are not connected to the internet or the server is unavailable.  Connect you to the internet and run the SETUP again.  During the installation process, accept all safety messages or a firewall. »

  I am connected to the internet and have tried the setup.exe and allowing the CD auto load with the same error several times running.    (Windows xp / laptop Toshiba - all system bus met...)     Thanks for any help!

  Hi kb11a,

  The Knowledge Base article has many resolutions for this issue. Follow the steps. I hope that one of them will fix the problem of the installation.

  Resolve the error "Setup cannot continue" when you install the LifeCam software
  http://support.Microsoft.com/kb/973297

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Setup cannot continue because the downloaded file has not been digitally signed by Microsoft. Please try again later.

  I have windows xp 32-bit.  I have a LifeCam VX-1000.  I do not have the CD, but when I plugged it the first time, Microsoft Wizard found the driver and installed it without a problem.

  Ran fine for 2 months, then I plugged it in today, I got the "new hardware found".  First OFF... what happened to the driver?  I have not installed anything new.  And then, it will not re-intsaller driver.  He invites me for a CD when I try to update the driver through the Device Manager, and when I try to run LifeCam 3.22, I've downloadedMicrosoft , he says "Setup cannot continue because the downloaded file was not signed digitally by Microsoft. "Please try again later."  WTF?  I downloaded from microsoft. How could he not be digitally signed by microsoft?

  How to get back the 'life' in my LifeCam?

  The LifeCam 3.22 file could have been damaged during the download process.  Download a new copy. Boulder computer Maven
  Most Microsoft Valuable Professional

• While booting XP machine, get error "the application cannot continue because it cannot find the uncdms.dll file.

  just after the start of the desktop windows appears and then I get the error message "the application cannot continue because it cannot find the uncdms.dll file" I searched using windows search, nothing helps.

  Hello

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed on the computer?

  Uncdms.dll file is associated with the Application of desktop search in Windows that is used to find and view an overview of the different types of files, such as documents, e-mail, photos and music files on a computer.

  By default, the uncdms.dll file is located in the folder C:\Windows\System32. The file is more common in 143 872 bytes.

  Follow the methods below

  Method 1:

  To uninstall the Windows Desktop Search from your computer, you must complete the following two tasks:

  Step 1: Remove Windows Desktop Search from the boot sequence

  To do this, follow the steps below:

  a. click on the start menu, click Run.

  (b) in the Open box, type msconfig and press ENTER.

  c. in the System Configuration Utility dialog box, click the Startup tab.

  d. search and clear the check box for any option that is related to Windows Desktop Search or uncdms.dll.

  e. restart your computer.

  Step 2: Uninstall Windows Desktop Search applications

  To uninstall the Windows Desktop Search using the Add / Remove Programs, perform the following steps:

  a. click the start menu and select Control Panel utility.

  b. double-click the icon Add / Remove programs.

  c. in the Add / Remove Programs, locate and select the Windows Desktop Search.

  d. press the button Delete.

  e. restart your computer.

  Method 2:

  Run the verification and virus scan online if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

• Run the fix it tool error center "Troubleshooting cannot continue because an error has occurred."

  Original title: run fix it tool center

  When I download a Microsoft fix it center tools I get following error message when I try to run the program after downloading

  TROUBLESHOOTING CANNOT CONTINUE BECAUSE AN ERROR OCCURRED SAID WERE SORRY, BUT THE PROGRAM HAS ENCOUNTERED AN ERROR TRYING TO CONNECT TO THE SEREVER 8007273DJ CODE

  Hi Dave,.

  Please send this query to Microsoft Fix it Center Forums. The forum is used to post those on the Microsoft Fix it Center automated troubleshooting tool.

  http://social.Microsoft.com/forums/is/fixitcenter/threads

• Dotnet 4.0, cannot be upgraded - "Setup cannot continue because a previous installation requires your computer needs to be rebooted...» »

  original title: Dotnet 4.0, cannot be upgraded.

  I need help on problem mentioned below, the error obtained when upgrading to 4.0 on XP with SP3 dotnet even machines with and without the dotnet 3.5 installed.

  "error: Setup cannot continue because a previous installation requires your computer needs to be restarted." Restart your computer and run the Setup again.

  Hello

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/download/en/details.aspx?ID=17851

  http://www.Microsoft.com/downloads/en/default.aspx

  For reference:

  How to reset the Windows Update components?

• Installation of blackBerry Smartphones cannot continue, because not all OS requirements have been met. Please upgrade to 10.6.0 or later.

  Hello

  Recently, I injured my 9700's screen "BOLD" from blackberry to the point where it was cheaper to buy a new one, so I did and that you bought a new blackberry curve 9320. Now I need to sync my old bb "BOLD" for my mac so I can get all my old in my new bb curve information, because without it I have no information because it is stored on my bb bold and I never the saved... but I still get this error message:

  Setup cannot continue, because not all OS requirements have been met. Please upgrade to 10.6.0 or later.

  I don't know where to find this version that I downloaed later on the blackberry site. If not, how can I get my information off my old bb "BOLD" on my mac, then in my new curve bb...

  If someone wonderful can come to my rescue?

  Thanking you in advance

  Yes, OK, now I see your problem... I didn't know that your screen has been damaged at this point.

  You get this message because the current version of the "BB Desktop Manager" software claims a newer MAC OS on your machine!

  Can't upgrade you your Mac OS to the newest? Generally, these improvements are very good markets in the Mac world.

  That would allow you to install the software and then (hopefully) make a backup of your machine (blindly?) and therefore to restore the data on your new device!

  So my advice would be to upgrade your Mac operating system. The other reason to do it, is that previous versions of the software BBDM are very difficult (does not say impossible) to find on the internet.

  Good luck and we keep abreast

• Windows Small Business Server 2011 - "windows setup cannot continue because a required driver could not be installed.

  Hello

  I try to install windows server enterprise on my hp proliant gen 8. I used smart supply and that everything was working fine, when switching to the windows installation it gets to 99% then comes up with the error:

  Windows Setup cannot continue because a required driver could not be installed

  I was wondering what I can do to solve this problem, I have tried several times without success. Thank you for your time.

  Hello

  Your Question is beyond the scope of this community.

  I suggest that repost you your question in the Forums of SBS.

  https://social.technet.Microsoft.com/forums/en-us/home?Forum=smallbusinessserver

  "Windows Small Business Server 2011 Essentials online help"

  https://msdn.Microsoft.com/en-us/library/home-client.aspx

  See you soon.

• Cannot install LifeCam HD-5000 on Windows XP - error "Setup cannot continue because an unexpected error has occurred."

  Original title: 953691

  Installation of webcam LifeCam HD-5000. I'm on Windows XP and you get to halfway through the installation and error message came through. Three times so far.

  Error message reads

  The installation cannot continue because an unexpected error has occurred

  http / / microsoft.com//kb/953691 support

  Any suggestions?

  Hello

  ·        Have you tried the steps mentioned in the article KB 953691?

  ·        What service pack is installed on your Windows XP system and version, 32-bit or 64-bit, what has?

  If you have not tried the steps mentioned in the article then, I suggest you try the steps and let know us if the problem is solved or not.

  Troubleshoot installation of Intellipoint and IntelliType LifeCam software

  http://support.Microsoft.com/kb/953691

  If you use Windows XP 64-bit, then the LifeCam HD-5000 is not compatible.

  http://www.Microsoft.com/hardware/digitalcommunication/ProductDetails.aspx?pid=019&active_tab=systemRequirements

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• "Windows Setup cannot continue because a required driver could not be installed" while improving to 64-bit

  I'm trying to install windows 7 64 on a 32-bit with the custom installation option. All is well until that right at the end of the installation it gives me this error "Windows Setup cannot continue because a required driver could not be installed. I tried this several times but the same results. I used the windows Upgrade Advisor to see if my computer is compatible and it is no problem.

  Error image: http://imgur.com/lOVj6eX

  Restore the previous installation of Windows and do the following:
  1 disable any security software before you attempt to upgrade or do a clean install.
  2. make sure that your computer is updated (devices and applications)
  3. disconnect all external devices before installing.
  4. check your hard disk for errors:
  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: chkdsk /r
  When you restart your system, your computer will be scanned for errors and will try to correct them.

  In addition, run the Windows 7 Upgrade Advisor, it will scan your system and provide a report telling you if your PC can run Windows 7, and if there is no compatibility problems with your hardware or programs.

• Files from Adobe PDF creation cannot continue because Acrobat is not activated

  I have Windows 8 and Adobe Acrobat Pro X, alongside CS6 Master Collection. Currently, I can't open PDF documents.  Whenever I double-click on a PDF file, nothing happens.  I tried clicking on the Acrobat X icon, nothing happened.  Sometimes, the activity is on / off, that is, sometimes it works, most of the time now it doesn't.  Recently, it started about 24 hours ago.  I tried to save it as a PDF and I get an error as creation of Adobe PDF files cannot continue because Acrobat is not activated.  I fully activated my license several months ago, so I don't know why this is.  I'm also a fatal error box: "Acrobat failed to connect to a DDE server. I tried to go in the Manager of tasks and endless AcroTray and Adobe Acrobat Update Service process. But this does not resolve the situation.  I tried to download the latest update 10.1.6 but that didn't fix it.

  Any other ideas?

  Also, yesterday I managed to get into Acrobat, I tried to repair the installation option, which did not set it.

  I have solved my problem by uninstalling Acrobat fully and then re - install.

• Microsoft fix it troubleshooting cannot continue because an error has occurred

  Distressed it Center solutions Microsoft, I can't download patches without getting an error message saying "Troubleshooting cannot continue because an error has occurred."

  I'm having the same problem. Microsoft does not seem to be interested. I don't buy anything else Microsoft until this is resolved.