Installation of ESX 3.5 script

Similar Questions

• manual installation of ESX with NFS as an installation source.

  Hello

  For educational purposes, I used to install ESX 3 using an NFS share as a source.

  To boot PXE and the GUI configuration ESX servers is automatically loaded.

  I used on my server to PXE boot have a .cfg with a label like this file:

  Manual of ETIQUETTE

  kernel ./vmware/vmlinuz

  Add ip = dhcp initrd=./vmware/initrd.img method=nfs:192.168.1.12:/PXEInstallESX ksdevice = eth0 lang = fr_FR keymap = be-latin1

  If I have this convert for vSphere4, I tried something like this:

  LABEL vSphere4

  kernel ./vSphere4/vmlinuz

  Add initrd=./vSphere4/initrd.img mem = 512 ip = dhcp method=nfs:192.168.1.12/PXEInstallVI4 ksdevice = vmnic0 quiet

  But it does not work...

  Starting the server in vSphere GUI installation but after a few screens that he asks the CD-rom.

  Any help is greatly appreciated.

  Kind regards

  Koen

  you have the beta version of the installation guide? Beta doc PXE boot section was:

  PXE boot

  You can use the isolinux / on the image of the DVD ESX for PXE DΘmarrer Installer ESX. An example of following to tftp/pxelinux configuration file:

  VMware-Classic label

  the VMware-Classic menu label

  VMware-Classic/vmlinuz kernel

  Append initrd = VMware-Classic/initrd.img mem = 512M quiet

  KS =http://

  The ks = option is required if you make a script with a PXE boot installation.

  Not sure if this can help. Do not have a Setup for PXE environment at the moment to test.

  Best regards

  Lee

• Error installation windows re-setup - a script required for this installation to complete could not be run

  Original title - how to reinstall windows install

  When you try to redownload the installer windows Iget a msg that says: a script required for t his install to complete could not be run.

  Hi nyyankee53

  
  You can check if the antivirus or other security software raises questions. I would say to you temporarily disable the security software installed and check if the problem is resolved.

  If you disable any security software for troubleshooting temporarily, so don't forget to activate after troubleshooting is completed that your computer will be at risk.

  See the help link - below
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

   

  I hope this helps.

• connect multiple ESX in my script.

  Dear all,

  How to connect mulitple esx, I write a script to connect to multiple esx simultaneously and get vmhost detials.

  I tried it in my script.

  $esx = (get-Content "C:\Desktop\vmlist.txt") to connect-VIServer $esx

  How to connect with the credentials. Please guide me to solve this thread.

  Then you should be able to do

  $esx = get-Content "C:\Desktop\vmlist.txt".

  Connect-VIServer $esx - the username-password YourPassword YourUser

  To avoid having the password in clear text, you can also use the Credential parameter

  $esx = get-Content "C:\Desktop\vmlist.txt".

  SE connect-VIServer $esx - Credential $cred

  There are several ways to get the credentials in the $cred variable.

  Alan discusses the VICredentialStore in his Back to Basics: connecting to vCenter or a vSphere Host post.

• Errors after the installation of ESX 3.5

  So I just bought a new server to install ESX 3.5 on. I went through the procedure of installation and when he was done, he told me to reboot the server, so I did, but once the server starts it goes to the attached screen. I can't ping the ip address I put in place for the esx server or whatever it is, it is just on this screen do nothing. I tried to erase the disc from scrath and hard, but I still get the same error. What I've done wrong? Thank you.

  I would also check the HCL to verify that there are no problems with the new server - http://partnerweb.vmware.com/comp_guide2/search.php

• Clone the installation of ESX vSphere

  Hi all

  because I need to install several servers of vSphere ESX4.1, I would like to install, customize and clone first installation to deploy on other IBM servers and I would use acronis.

  Of couse, I need change IP settings and name host, but using the new console-setup command will be very fast.

  Test this on a vsphere VM works fine: don't you think that it should also work on production and of course without any possible future problems?

  Thanks in advance.

  You can use the script boot and PXE boot to have a massive facility.

  For the configuration of CLI command use, so you can just copy and past on your hosts.

  André

• Step 9 10 grille Installation Wizard - run root.sh script problem

  People,
  
  Hello. I want to install Oracle 11 g RAC 2 with 2 Virtual Machines (rac1 and rac2 which BONES are Oracle Linux 5.6)
  and according to the tutorial http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
  
  The virtual disk for each virtual computer is 20 GB which is/dev/sda raw device (the partition/dev/sda1 is the same size).
  
  In order to install the grid Infrastructure, I add 5 disks in the first machine virtual rac1 and 10 GB for each hard drive.
  Then create 5 ASM disks respectively as a disk group. Let me describe them as follows:
  
  OS Phyysical file: C:\VM_RAC\sharerac\asmdisk1.vmdk (asmdisk2.vmdk asmdisk3.vmdk asmdisk4.vmdk asmdisk5.vmdk)
  The corresponding raw device: / dev/sdb (SDC sdd sde sdf)
  Corresponding partition: / dev/sdb1 (sdc1 sdd1, sde1 sdf1)
  Corresponding ASM drive: ASMDISK1 (ASMDISK2 ASMDISK3 ASMDISK4 ASMDISK5)
  
  When I run the installation of grid step 5 of 8, I select all 5 ASMDISK as ASM disk group in the wizard.
  Clusterware files are supposed to be stored in the ASM disk group.
  
  2 virtual rac1 and rac2 machines must use the same ASM disk group.
  Here, I do not do anything about ASM disk group in the second rac2 VM.
  
  By operating step install grille 9/10, run the root.sh script in 2 VMS rac1 and rac2. The root.sh script runs successfully in the first VM rac1. But when the root.sh script is executed in the second VM rac2, the error message appears as follows:
  
  "... ...
  ORA-15018: disk group cannot be created.
  ORA-15031: disc "ORCL:ASMDISK5" specification is no disks.
  ORA-15031: disc "ORCL:ASMDISK4" specification is no disks.
  ORA-15031: disc "ORCL:ASMDISK3" specification is no disks.
  ORA-15031: disc "ORCL:ASMDISK2" specification is no disks.
  ORA-15031: disc "ORCL:ASMDISK1" specification is no disks.
  ASM configuration failed.
  Not properly configure and start the ASM.
  Failure of the initial cluster configuration.
  ... ..."
  
  The error message above, it seems to connect the second rac2 VM with the ASM disk group created in rac1 so that the 2 virtual machines use the same set of disks for ASM.
  
  But I don't see anything on the ASM disk group in the second VM rac2 in tutorial
  http://appsdbaworkshop.blogspot.com/2011/10/11gr2-RAC-on-Linux-56-using-VMware.html.
  
  My question is:
  
  Include any folk how to fix ASM disks in the second rac2 VM when run the root.sh script in rac2 on step 9 of 10 in the Setup Wizard?
  
  Thank you.

  Hello

  Shared storage is the requirement of the CARS. Check if you have shared storage on all nodes.
  Run oracleasm listdisk on Node2 to see if he can see the same discs on node 1. Otherwise you follow this tutorial correctly

  See you soon

• Installation of Oracle DB Providers scripts errors

  After installing Oracle XE DB and ODP.NET, I tried to run included scripts to establish tables suppliers .NET. When I try to run InstallOracleMembership.sql for example, the operation fails with errors as follows:
  
  IF (ora_aspnet_TableExists ('ORA_ASPNET_MEMBERSHIP') = 0) THEN
  *
  ERROR on line 2:
  ORA-06550: line 2, column 11:
  PLS-00201: identifier 'ORA_ASPNET_TABLEEXISTS' must be declared.
  ORA-06550: line 2, column 6:
  PL/SQL: Statement ignored
  
  Just then a few warnings-> WARNING: function created with compilation errors. And more errors:
  
  GRANT SELECT ON ora_vw_aspnet_Applications TO ora_aspnet_Mem_ReportAccess
  *
  ERROR on line 1:
  ORA-00942: table or view does not exist
  
  GRANT ora_aspnet_Mem_BasicAccess TO ora_aspnet_Mem_FullAccess
  *
  ERROR on line 1:
  ORA-01917: user or role 'ORA_ASPNET_MEM_FULLACCESS' does not exist
  
  To this end, I created the user and it added privileges like create role, view, table according to this tutorial [tutorial Oracle | http://docs.oracle.com/cd/B28359_01/appdev.111/b28844/installation.htm#BABDEHAJ]
  I use ODAC 11.2 Release 4 (11.2.0.3.0) 32-bit, Oracle 11 g R2 XE DB, professional Win7 64 bit and VS2010.
  
  I followed Oracle tutorial.
  My steps were therefore:
  1. new Oracle XE 11 g R2 DB Installation (32-bit)
  2 ODAC Installation (32-bit) with ODT and instant Client
  3. I created the ASPNET_DB_USER user and granted privileges
  4. via Studio VS 2010 and run SQL * more script, I ran InstallAllOracleASPNETProviders.sql but the installation failed with above errors
  Everything works on the same computer.
  
  Am I missing something? What I am doing wrong? Thanks for help.

  These scripts are for ASP.NET and not ODP.NET.
  You must run InstallOracleASPNETCommon.sql before InstallOracleMembership.sql.
  But first, make sure the database user (you use to run these scripts) required privileges, such as:

  create the role
  create view
  create jobs
  create public synonym
  Drop public synonym
  change notification

  Oracle providers for the ASP.NET forum:
  Oracle for ASP.NET providers

  Edited by: shsu January 13, 2012 11:40

• Installation of ESX NIC support

  install ESX 3.5 u4 VMWorkstation 6.5. Has encountered an error: Setup could not find supported network devices.

  It seems that my NETWORK card is not supported.

  Can anyone recommend inexpensive NIC for a desktop PC that will support the ESX?

  I guess that you configured wrong your ESX - VM.

  Use this ESX - VM as a guide

  http://sanbarrow.com/moa24/files/esxi_35.zip

  He'll find NICs during installation

  ___________________________________

  Description of the vmx settings: http://sanbarrow.com/vmx.html

  VMware-liveCD: http://sanbarrow.com/moa.html

• ESX and VMware scripting Backend process...

  Hi all

  I look forward to hearing the internal processes that continue on the street within the ESX Server. For example:-that the ESX actually did when the user fires rescan command esxcfg-rescan & lt; vmhba. & gt;. Is there any script is triggered on commanded this shooting? and even on the backend to another ESX processes orders too. I want to update my self on these things. Hope someone here could give me a helping hand.

  Concerning

  MRM

  If you are interested about how ESX (i) and some of the inner workings, you should take a look at some of the documents/charts architecture, this is available on VMworld if you have an account, and the majority of it should be free of previous years, less the recent VMworld Europe / U.S..

  Here is another good site for a collection of documents to help: http://vsphere-land.com/top-10-list/top-10-list-index.html

  If you are only interested in some of the esxcfg-* commands, a good way to learn what it is doing and the parts of the system it touches is to download the vCLI/RCLI: http://engineering.ucsb.edu/~duonglt/vmware/#vmware_rcli

  These commands are similar to that of those on the classic ESX which are used to manage/configure remote both ESX(I) hosts and they use the VI API http://www.vmware.com/support/developer/vc-sdk/visdk25pubs/ReferenceGuide/index.html

  You can open each of these scripts and get a good understanding, most of the classic esxcfg-* commands are compiled binaries which makes internal calls to the system, but some are normal Perl/bash scripts such as esxcfg-rescan or vmware-cmd and you can open these and take a look at what he does.

  So it really depends on what you're trying to understand and explain how you want to enter.

  I hope that gives you an idea of where to go.

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  http://Twitter.com/lamw

  If you find this information useful, please give points to "correct" or "useful".

• Question about the installation of ESX 3i on IBM HS21 Blade

  Hello. I am trying to install the ESX 3i on the IBM HS21 Blade, but during which there was to "start VMware ESX 3i.......................... "and refuses to go forward.

  In this screen, the process bar would normally at first and then quickly run 80% all of a sudden. Then he standed there.

  I had tried another Blade (also ibm HS21) and ESXi image is guaranteed to be correct (in fact, the installation process was proved OK on another DELL server). The LIST is the following:

  1 VMware ESX 3i build 123639

  2 IBM HS218853 HSI

  How could I do with it? Someone told me that maybe some of the HW in HS21 don't is not supported by ESX 3i, is it true?

  PS: I tried to install the u3, ESX 3.5 on the HS21, too. Finally, the graphics mode cannot be loaded after the installation.

  Try pressingf1 or ALTF12 ALT to see if there are error messages.  You have 1 or 2 physical processors installed?

• Embed the image file in the installation of the objects support script

  Hi everyone knows the way?
  
  I thank in advance.
  
  Edward

  Hi Edward,.

  Are you waiting for install images in your application for grouped with the installation script for the action of the export? then follow this procedure...

  Home > Application Builder > Application 102 > supporting objects > create the install Scripts->->
  -> Create Scripts to install files
  -> Check all
  -> Create script

  Export tab = Yes.

  When you export the application that contains objects supporting > Scripts Installation and then your application workspace imported will have the image file embedded.

  If you want more group acronym installation script for an image and then copy the code once you perform the steps above and paste.

  Thank you
  Mark Wyatt

• Installation/update von DataPlugins by Script

  Hallo zusammen,

  STIs are possible VBScript Dataplugins by Script DIAdem zu installieren und zu aktualisieren?

  STIs are if necessary. possible das DIAdem auf Dataplugins auf einem zentalen network zugreift?

  ICH betreue about 25 customers und da ist are naturally lastig wenn die Dataplugins selbst von installieren must user.

  Danke,

  Elmar

  Hallo Elmar,

  Es ist possible, ein use programmatisch durch ein DIAdem VBScript zu register:

  Call ExtProgram ("" "& ProgramDrv &" "... \Shared\USI\Bin\usireg.exe" "", "/ u/v""C:\SIF.uri" "" ")

  Dadurch wird das 'Quellcode"(VBScript) use in einen local Ordner kopiert - sharp local DataPluginversion wird dann immer pricing, dass eine Datei durch dieses use loading wird respect.

  Gruss,

  Brad Turpin
  Tiara Product Support Engineer
  National instru

• New installation of ESX 4.1 U1 - unable to connect

  I just install ESX 4.1 - 1 on a new IBM HS22 Server Update. The first thing I did was to try to connect the host ESX to vCenter (also 4.1 Update 1), but I get the following error message.

  Cannot complete the connection due to an incorrect user name or password.

  Call 'Datacenter.QueryConnectionInfo' to object "My Datacenter" on vCenter Server 'vCenter Server Name' failed.

  So I think that then I check the information of identification/connection and connect directly to the host via vSphere Client, I get the following error.

  Cannot complete the connection due to an incorrect user name or password.

  I am a little confused at this point, so I try to connect via the console and STILL unable to connect,

  VMware ESX 4.1 (Kandinsky)

  Kernal 2.6.18 - 194.ESX on a x86_64

  esx13 login: root

  Password:

  Incorrect login

  Login:

  Then, even more confused at this point, I decided to reinstall ESX just incase I got the wrong password. I get the same thing! I tried to type the password as the username just to see clearly and to be sure, it's passing the correct letters, that is.

  I installed the ESX 4 and 4.1 of ISO before and never had any problems, but it's the first time I get 4.1 ISO U1.

  Does anyone have any suggestions? I am quite perplexed!

  Thanks in advance.

  You may reset the password: http://kb.vmware.com/kb/1317898

• Installation of VM Player using script on Linux

  Everyone installed VM Player automatically using a script under Linux before? If so, how?

  Exactly that!