Charge dynadock U10 USB mode not working / charging

Similar Questions

• I installed Windows XP on my new computer (with Windows 7 PRO), but my USB does not work on Windows XP. It works fine on Windows 7

  I installed Windows XP on my new computer (with Windows 7 PRO), but my USB does not work on Windows XP. It works fine on Windows 7.

  Hello

  And much more: (XP mode requires professional, Ultimate or Enterprise).
  

  Get all the benefits of Windows 7 and continue to take advantage of your investments and more
  business and productivity programs that require a PC running Windows XP.

  Note: Windows XP Mode requires a download.
  http://www.Microsoft.com/Windows/Windows-7/features/Windows-XP-mode.aspx

  Windows XP mode
  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

  Windows XP Mode is supported through Technet

  TechNet - Forums - Windows 7 virtualization
  http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• USB ports not working do not. Pavilion dm4-3090se

  USB ports not working do not.

  Thanks for your reply.

  no ports were working, so I went into Device Manager, uninstalled them, re-started... and... iola!

  they were back!

  Thank you again for your answer...

  Louise

• Satellite A200-1tw psae6e - USB ports not working not

  I use windows 7 ultimate on Satellite A200-1tw (psae6e-06u030du) and my usb ports no longer works correctly.
  In fact they recognize certain usb devices, but not all (for mouse and printer example work, but my USB does not work)

  Looking at the Device Manager, everything seems OK... No problem!

  Does anyone have a solution for my problem.

  Thanks :)

  Hello

  Try resetting the USB ports. This means that you need to remove the USB ports/hubs/controllers in Device Manager.
  Then, you have to restart the laptop to get new USB ports.
  In my case it has worked.

  By the way; I recommend upgrading the chipset driver and disable the feature for each energy-saving usb port.
  This can be done in the Device Manager-> port USB-> properties-> tab to save energy

• SA30 USB do not work after reinstallation, please help!

  Hi, my SA30 USB does not work after reintalling, I don't have the original CD with the phone because it was a gift from my friend... I couldn't find the driver from the website, please could someone help me?

  I could use the USB mouse, but when I plug the external hard drive, he has no answers, I tried to get some new material, it could not detect it. Any information would be welcome, see you soon.

  When install you an OS other than the OEM OS recovery, you need to install the drivers and tools in a right order!

  This command is on the Tools & Utilities CD in a html file! When you follow these order all material must be detected!

  Also you can go to http://eu.computers.toshiba-europe.com and download the drivers

  Hans Bye

• Peripheral USB do not work correctly on the Satellite M40 313

  I have a Satellite M40 313 I bought there are about 1 1/2 years and have had some problems with.

  However, I recently bought a Canon S3 IS and a Buffalo portable HD here in Japan, where I currently work.
  These two devices do not work with my computer.

  Attach the HD produced the message that this device will work better with a USB 2.0 high speed Port, before XP decides that the HD is actually a keyboard HID device! The camera mount, for which I had installed the software provided, will produce a message that suggests that I have install usbscan.sys file and forces me to use a driver of generic digital camera that does not work with the Canon camera.
  I fetch the requested file, but it made no difference...

  It seems that it is a problem of USB, and I also noticed that some of my friends devices USB do not work well with my computer.

  In this case, what is the best way to update my software so its compatible USB? Have I been dismantled down to the USB 1.1 version by WIndows at any given time? The pilot on the hub root 5.1.2600.2180 and is dated 07/01/2001.

  Any suggestion is appreciated.

  Hello

  Perhaps a biosupdate could help you? I mean it s do not know if is it a hardware problem or software, so that you can first try to check if it s a software linked history by:
  1.), updated the Bios
  2.) recover the system with the recovery cd (backup your data first!  ;))
  3.) install the latest drivers (do not install MS updates or patches, sometimes they cause errors)

  If you have no success after completing these steps, and then give a few comments.

  Welcome them

• my super USB does not work after last update OS EL Capitan

  my super USB does not work after last update os el capitan

  Hi viral_02,

  The resources below provides a few for the SuperDrive USB troubleshooting steps.  Click on the link to see all the possible symptoms and solutions, including resetting the system management controller.

  Get help with the SuperDrive slot on your Mac computer loading

  If the problem persists, Contact Apple or an provider of services authorized Apple, or make an appointment with an Apple Retail Store additional diagnosis, evaluation, or service.

  Take care

• Dynadock USB Ports not working not

  I have a Toshiba Dynadock (unfortunately I do not know the model number I can't). It is less than a year and has two USB ports in the front, with 2 Sockets (I guess that one of the earphones and a microphone), has 4 ports usb at the back and probably a DVI/HDMI port as well.

  The problem is that none of the USB ports work on it, you plug a USB device into one of the ports and Windows 7 does not detect something that is attached. It was working fine until recently, and then the printer started to play up by printing only a few lines in a document that you asked to print, and then after that nothing worked (I don't think that the printer is at the origin).

  When I reassembled the eject button on the dock, Windows recongonises ejection and hot flashes with the software Dynadock saying "Dynadock has been ejected" or similar.

  The computer is a Toshiba. I reinstalled the drivers, made a restore to a date when I heard he was working and have restarted the dock, but nothing worked so far. Any suggestion would be appreciated.

  Thank you

  Hello

  Try it please use this driver - http://www.displaylink.com/support/downloads.php

• Dynadock U10 - video suddenly stopped working

  I have a computer laptop under Win 7 x 64, connected to a port replicator port Dynadock U10. It worked well for the past two years - until today, when I got to use the system (I leave on), only to find the Dynadock software apparently reinstall itself (updated?). I have approved the update, but concluded that the video on the screen of the remote control did not work. The mouse and the keyboard are functioning normally.

  Just to be sure, I uninstalled the Dynadock software and downloaded the latest version from the Toshiba support site. He installed normally, but no joy on the screen.

  The display of the Panel cannot find no sign of the second screen. The monitor itself has been tested and is functioning normally.

  Another possible symptom of a problem, it's that the DisplayLink Core software icon is missing.

  Any ideas anyone?

  Richard

  Hello

  I recommend you to install the latest version of the page displaylink software.
  Click on the link below and download and install the latest driver for graphics card for the dynadock:

  http://www.DisplayLink.com/support/downloads.php

• HP Pavilion DV7 2270us: USB Ports not working on HP Pavilion DV7

  I get the USB device not recognized on all USB ports on my laptop.

  I am running Windows 7 (recently did a restore to clean computer) service pack 1.

  I refreshed the BIOS

  I tried to remove all the drivers, stop, remove the battery and restart

  I tried refreshing all USB drivers

  I tried to adjust the power settings to make sure that all power mode on the economy USB devices has been disabled

  Still no luck. From time to time I can plug something and it will work a bit then it becomes disconnected. I think this could be a hardware problem as no intervention software worked. All advice appreciated!

  Miranda

  @mdiakiw ,

  Hello and thanks for the display on the HP support forum.

  Thank you for the great information you have provided to us.  I agree that you did already that you are looking at a hardware problem.

  It seems what's your connection and once the jury warms the connection develops and is then broken.

  The next step would be to contact the helpline for repair options.

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I thank you again for posting. Have a great day.

• [Inspiron SE 7720] UEFI boot from USB does not work

  Hello

  I just bought a Dell Inspiron 17R 7720 special edition. It came with a Windows preinstalled 8 (up to 64 bits and mandatory boot UEFI). I want to use Linux (specifically, Archlinux) for the work and Windows for games, so double boot is necessary.

  I'm almost finished installing Linux except for the boot loader: I need to start Linux from UEFI and has failed to do so far. Here's what I did after I got the PC:

  • Secure Boot disabled;
  • updated the BIOS to the version A12 (maybe I shouldn't...);
  • resized the main Windows partition and created a few partitions for Linux;
  • legacy startup mode and managed to start an installation of Archlinux MBR bootable USB drive.
  • most of the system installed
  • switched back to UEFI boot mode, Secure Boot off.

  At the moment, I needed the UEFI kernel startup Setup Bootstrapper to have access to the EFI environment variables. So I created an installation of Archlinux UEFI-bootable USB drive (with a FAT partition) but so far I could not able to boot successfully to this car of UEFI instead of Windows 8.

  I think I tried every single combination, such as:

  • different USB ports;
  • different startup entries created with F2 installation boot, with different parameters.
  • different commands for start-up entries;
  • has hit my startup entries directly in the F12 boot menu.

  Anything in the startmode of the system always the Windows partition UEFI.

  Also, I couldn't find any relevant documentation manual or software on the A12 BIOS on the Dell site, I missed something?

  The solution that the user described in this thread for UEFI boot on a DVD has not worked for me with a USB key.

  If anyone had the same problem or has a solution or even information about it? UEFI is really starting to give me headaches on this machine!

  Thank you for reading.

  Try to go into the Advanced Boot Options.   Hold down the SHIFT key while as a RESTART to win 8.  This will get you to a page that will have an option called "Other devices" (from memory).    Choose that and you will have all features of the device as USB. First of all give it a try and I'm sure there is an easier way to start Linus directly more later.

• Zbook G3 HP: HP Zbook Thunderbolt 3 Dock USB ports not working not

  I have a HP Zbook Thunderbolt 3 dock on my HPZbook G3.  I've recently updated the BIOS and the firmware to the latest version to solve other problems 'dock '.  Am now at the latest for both.  The two monitors and ethernet on the work of lightning 3, but none of the USB ports are active.

  I am sure that the USB ports work, because they used to work before the update BIOS and firmware.  Keyboard, mouse, or USB memory on the dock work.

  I tried to go to the HP support and install the updates with the USB in it, but it didn't work.  I have a workaround - just connect the laptop directly, but I'd like to get my fully functioning dock.

  Device Manager does not display devices with questions.  I'll try to update, but I don't know which one to look at.

  

  Hey people,

  HP is dedicated to providing quality products to meet the needs of our customers. We listen to the customer feedback on our recent Thunderbolt Dock for use with the latest products ZBooks, and Elite Notebook. We continue to work with our customers to solve problems.

  Please find tips and updates to improve your use of the HP Thunderbolt docking station.

  1. The Thunderbolt dock uses the latest technology thunderbolt. To be fully functional, it takes the latest firmware, BIOS, and drivers to work properly. Please follow the step by step process as described below in "The process of updating your device".
  2. Here are links to the user, technical white paper guide helps and guides troubleshooting. Please, use them to help when you have problems after you have fully updated your device and platform by following the instructions above. Please note that you may copy and paste the links in your browser.
  3. If you still have any questions, please call HP support. We're here and eager to help succeed you using the HP docking station new Thunderbolt.

  Useful links

  User Guide: http://h20565.www2.hp.com/hpsc/doc/public/display?sp4ts.oid=11122586 & docLocale = en_US & docId = emr_na-c05141189

  Technical white paper: http://www8.hp.com/h20195/v2/GetPDF.aspx/4AA6-5088EEW.pdf

  Help & troubleshooting the Dock: www.hp.com \support\thunderbolt3dock

  Process to update your device

  NOTE: Instructions below is found in the User Guide "Getting Started" to "Implementation of the dock" to "step 2: update your computer.

  Before connecting the dock to your computer, update the BIOS, software and drivers on your computer.

  NOTE: If you do not, the wharf may not work. For best performance, keep all software and drivers on your computer up to date. (See table 1)

  Update the BIOS and the software and drivers:

  1. Go to http://www.hp.com/support. Select the drivers and Get software, enter your model of computer (on the computer service tag) number, and then select search for my product.
  2. Click the link for your specific computer, select your operating system and then download the latest version

  BIOS, software and drivers as follows: Intel® Thunderbolt Firmware Update Utility, Intel's Thunderbolt

  Secure Connect Driver, graphics drivers, ASMedia eXtensible Host Controller Driver, Broadcom Ethernet

  Controller and driver Conexant USB driver.

  1. Install the latest version of the BIOS.
  2. Restart the computer.
  3. Install the last stroke of lightning Secure Connect driver Intel.
  4. Restart the computer.
  5. Install the latest Intel Thunderbolt Firmware Update Utility
  6. Restart the computer.
  7. Install any remaining updates in any order. Restart the computer after each update.

  Table 1

  For the products supported Thunderbolt Dock all HP
  Name of the component	Category on the Support Page on hp.com	Where to check (this applies to all laptops)
  BIOS	(BIOS)	BIOS F10 Setup to information system
  Intel's Thunderbolt course connect driver	(Pilot - controller)	Right click on tray icon Thunderbolt to settings for details.

  The Thunderbolt of Intel® firmware update utility

  (Firmware)

  Right click on tray icon Thunderbolt to settings for details. Note that the numbers on the left will not directly reflected. NVM Firmware Version: 16 PD Firmware Version: 1.07.03

  Intel Graphics Driver

  (Driver - graphics)

  Right click on the desktop to graphic properties (icon intel) Options & Information Center Support.

  NVIDIA graphics driver

  (- Graphics - Nvidia driver)

  Right-click on the desktop to NVIDIA control panel to information system at the bottom left.

  AMD graphics driver

  (Driver - graphics)

  Right-click on the desktop to graphic properties (top) to Information to software.

  ASMedia eXtensible Host Controller Driver

  (Driver - Chipset)

  Programs & features or the Device Manager to Universal Serial Bus Controllers (dock of needs to be connected).

  Of Broadcom Ethernet controller driver

  (Driver - network)

  The Device Manager to network adapters (dock of needs to be connected).

  Conexant Audio Driver USB

  (Audio - driver)

  The Manager of devices to sound, video and game controllers (dock of needs to be connected).

  BPPSQ-

  I work on behalf of HP

• Satellite Pro L10-103 - USB ports not working not

  Hi, my Satellite Pro L10 - 103 USB Ports do not work. I tried different things and finally my Advisor rubbed my computer clean of all programs and operating system. After reloading of the set up disc and having lost my dear some programs I am no further forward. It still does not.

  Anyone know if this means that it is a mechanical problem with the computer? (I use Windows XP). Your help would be greatly appreciated.

  Hey Buddy,

  As wrote Akuma did you use the Toshiba Recovery disk or the Microsoft Windows disk?

  After installing XP, make sure that Service Pack 3 is installed. It contains important updates and can be downloaded on the official page of Toshiba.

  In addition, try to remove all the USB ports on the Device Manager, restart the computer. Ports will still be recognized and ready to use once.

• Satellite C50-A-157 Sandisk USB does not work in Recovery Media Centre

  I can't get Sandisk Cruzer USB to work in recovering from the media library. Have tried formatting but no luck.

  I read on another forum of Toshiba that Sandisk USB keys do not work and you need to use another brand.

  Anyone know if it's true?

  Thank you

  To be honest, I don't think that any USB Sandisk flash memory sticks don't work with Recovery Media Creator. But of course because of a problem of compatibility between the device and the software, it is possible that a USB flash memory stick would not be recognized.

  I have never known such problems with my Recovery Media Creator software.
  I could create a recovery media using two different USB sticks from two different manufacturers. One of them was a SanDisk flash memory stick.

• Satellite Pro 4270 - USB does not work

  Hello.

  I had this problem for a while, and I was wondering if anyone had any suggestions to solve this problem.

  I have more or less of work Satellite Pro 4270 (4200 Series) computer laptop with XP on it.

  The USB port does not work. I don't know why it does not work. I tried to replace the USB module on the motherboard that has not worked. I've updated the BIOS to the latest version, has not functioned. Removed and reinstalled the drivers in XP, not worked. I'm out of ideas.

  IrDA works very well.

  Some suggestions please. Thank you

  Hello!

  I understand, were you solder the module USB motherboard and then solder another module?

  I mean, what have you done with the module USB, replacing? Sorry, I don't remember exactly how the USB module is connected to my mobo SP4270 seen last about the half a year ago... If the welding, I don't wonder the problem... but if not, there may be a solution...

  Best regards

  Pete v.