Installation of FSX in Vista Home Premium

Similar Questions

• FSX and Vista Home Premium problems

  How can I get good frame on FSX rates?  As I loaded Vista64 on my computer, I have averaged 3 to 8 FPS!  What don't get me, I tried all kinds of settings and no dice!  Thanks for any help!

  My computer: AMD Athlon 64 X 2 Dual Core Processor 6000 + 3.10 GHz
  8 GB RAM
  NVIDIA GeForce 8400 GS 512 MB

  Hello FlyingBlind,

  Thanks for posting in the Microsoft answers Forum.  I hope that FSX, you're talking about Flight Simulator x.  The following suggestions are for Flight Simulator X. have you installed any service packs for Flight Simulator X?  If this isn't the case, you might want to consider following this link and installing the recommended updates:

  http://www.fsinsider.com/downloads/pages/SP2-en-Readme.aspx

  Please pay special attention to the sections on Vista 64-bit.  Specifically, the section where the progress of the installation bar seems not to move because despite this, the service pack IS installed.  I hope this information is useful.

  Thank you

  Jack
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Could not locate the installer of Windows on Vista Home Premium 32 bit.

  I tried for days to download an important update to Corel Paint Shop Pro Photo ultimate x 2.  I get the message that it cannot find Windows Installer - 86.  Or that the download has been blocked by the DEP system.  How can I get around these issues?  Also, Windows Installer 4.5 is available for my version of Vista and it's a download automatic or optional?

  Hello Vicki vs,

  Thank you for using the Microsoft Windows Vista Forums.

  Have you scanned your computer for malware?  I added a few steps to perform.  Please let us know status.  Thank you!

  Please follow these links to scan your computer.

  1. run it Microsoft Windows malicious software removal tool

  
  2 this online scanner (in safe mode with network, if possible):
  http://OneCare.live.com/site/en-us/Center/howsafe.htm

  When running Windows Vista in Normal Mode or Mode without failure:

  1. open a CMD window as an administrator (click Start, all programs, accessories, right-click on command prompt and choose Run as administrator)

  2. run this command: sfc / scannow

  3. look for the results returned by the SFC

  Watch carefully the present SFC results in the command prompt window.  The three possibilities and their conclusions are

  ·          SFC found no problems: This means that versions of the correct system files are used by Windows Vista, SFC.exe can determine. If you're still having problems in Windows, it could be questions of registry (SFC checks the files, not the registry), software installed on Windows or equipment.

  ·          SFC and fixed problems: This means that the SFC may have solved your problem. Try to reproduce the problem again. If the problem persists, it may be that there is unrelated to system file issues. But the presence of these questions could indicate that corruption

  ·          Found but SFC could not solve problems: This means that there are more important issues with the Windows system files. It could be that you have corruption in the SFC store uses for recovery.

  Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Installation of KB937287 in Vista Home Premium 32 - bit PC update. There are two downloads available, one for Vista x 86 and one for x 64 Vista systems-based. That you choose?

  Windows Update does not work. I keep being told that updates must be installed, but the installation is always unsuccessful. Whenever I get this message: ' configuration updates step 3 of 3. " 0% complete.  Then: "updates were not correctly configured. Restoration of the changes. Do not turn off your computer.

  On the Microsoft Support, I find the leaflet KB949358, which seems to cover the problem, and I'll try Method 2, using the restore of the system, a transfer of KB937287 followed. But he gives then two files available for download, and I don't know if I can use one of them or if only suitable for my 32-bit Vista system and, if so, which?

  Windows Update does not work. I keep being told that updates must be installed, but the installation is always unsuccessful. Whenever I get this message: ' configuration updates step 3 of 3. " 0% complete.  Then: "updates were not correctly configured. Restoration of the changes. Do not turn off your computer.

  On the Microsoft Support, I find the leaflet KB949358, which seems to cover the problem, and I'll try Method 2, using the restore of the system, a transfer of KB937287 followed. But he gives then two files available for download, and I don't know if I can use one of them or if only suitable for my 32-bit Vista system and, if so, which?

  86 = 32-bit,

• KB954430 installs whenever I stopped Vista Home Premium 32

  It again me successfully, but there no date every time I stopped since 02/08/09.  Why is this and how do I stop?  I have not updated each time out.

  Thank you

  Hugh

  See known issues: http://support.microsoft.com/default.aspx/kb/954430

  This security update may repeatedly appear in the update on Microsoft Update or Windows Update list if one of the files system is corrupted or if it has not been correctly updated. For more information about this issue, click on the number below to view the article in the Microsoft Knowledge Base:

  941729 (http://support.microsoft.com/kb/941729/) updates of security for Microsoft XML Core Services 4.0 Service Pack 2 may repeatedly appear in the update on Microsoft Update or Windows Update list

  TaurArian [MVP] 2005-2010 - Update Services

• Vista Home Premium: Startup time and office flaws often requiring the log off / log on to Correct

  At all to being able to help solve these problems successfully:

  When I bought my office, it came preloaded with Win XP (a FANATASTIC/s o!) with an installation disc free for Vista Home Premium. I have installed Vista until recently due to support XP being more available.

  Problems currently on a regular basis (every reboot) are:

  (1) long startup (sometimes nearly 10 minutes)

  (2) the "Blacktop" (AERO) Vista appears generally "gray" (like Win Classic) but with VERY little
  Services (icons missing, unable to run diagnostic programs, etc.).

  In this situation, I usually 'Log Off' and 'Connect' again and it fixes the problem-"bitumen".
  is back with the functions of the al. Despite this, I'll restart desktop using Services.msc. for all the functions

  are available.

  System information:

  (A) AMD 64 Athlon 3500 + (2.20 GHz)
  (B) 3.00 GB RAM
  (C) Vista 32 Bit (SP1 and SP2 installed (all updates current)
  (D) ATI Radeon XPress 200 Series (current driver)
  (E) all drivers are current (no changes required)
  (F) update BIOS (not not required)

  Note:

  (1) I am the user ONLY if the 'Default' options are regularly 'Log In' (as admin) - no guest accounts, etc.

  (2) I reduced some Desktop effects, which are not necessary (Menu Fade in and out, etc.) according to

  instructions of MSFT community on how to do this and what is safe to disable. This helped a little
  and I don't miss these features.

  (2) I deleted the "Windows.old" folder (as there was nothing to add to the Vista o/s).

  (3) I have NOT deleted the Partition which was part of the Win XP System Restore feature as)
  "I don't know if I should as well as to think that I should keep this system offline and running XP).

  (4) I use a security program that securely wipes deleted data, cache password, etc..
  Under Win XP, there was the possibility of "Protect Restore Points" (not required for Vista).
  I do NOT use the option "delete shadow copies".

  My questions are:

  (A) what is the cause of the boot extended both office and how to tackle it successfully?

  (B) what is the problem with the desktop computer? I don't mind the Log in and out a lot but would like to get rid
  me of this disadvantage.  I would like TO have the Vista boot WITHOUT having to Log in and out to

  ensure that the AERO desktop is available and functional.

  (C) should I delete the files and restore Partition in Win XP? Is this the cause may be a conflict with
  Vista? Also, please let know us if you think it would be better to keep these files available if no
  conflicts are possible or probable.

  (D) what is the path, the file name or folder (path if necessary) which governs the entire desktop
  (startup, appearance, services, etc.). so I can enter my security software to exclude it from
  be affected?

  Thank you in advance for any help you can offer.

  Incidentally - for all owners of Scanner Epson 1200U running Vista Service Pack 2:

  YES! Successfully, you CAN install and run this scanner on Vista with the EPSON Twain 5.53 driver without twisting your registry, etc.

  Steps to follow:

  (1) download the file of v5.53 (10245.exe) driver TWAIN Epson

  2) extract to the folder (default location or a location of choice) and open the folder

  (3) right click on the "Setup.exe" file, go to properties and set the compatibility to Win XP SP-2

  (4) run the configuration file and wait for Windows Vista to give up the search on the web, ignore the 'warning' when he

  comes to the top and connect the scanner to complete installation as you did under Win XP (or earlier versions)

  NOTE: You will have to wait a long TIME for the next window appears once complete Vista

  research on the web. It seems that the reason why a lot of Vista with the Epson 1200U Scanner users are

  running out of patience, that it was my problem-so, the Eureka moment happened!

  My camera works great! The only loss is you open TWAIN in the application, is not
  automatically start more. This may be fixable, but I'm glad it works and I don't know enough to make the necessary changes in the registry, etc.

  Thanks again for your help!

  try to use MS-FIXIT

  http://support.Microsoft.com/mats/slow_windows_performance/

  If that didn't help, then maybe you would not survive the installation completely, and you will have to reinstall vista with updates it's still once, don't worry, it happens to all peoples.

• Dell XPS 420 with Vista Home Premium, replaced the hard drive, download now blue screen errors

  My girlfriend has a desktop Dell XPS 420 quit working a year or 2 ago. A computer technician told me that it sounded as if the hard drive was bad, recently I purchased from Dell, a Seagate 1 TB hard drive (the original is a Western Digital 320 GB).

  I bought also, once again from Dell, a copy of its installation discs for Windows Vista Home Premium 32 bit.

  I installed the new hard drive, correctly, as far as I can tell, but I tried several times over the past days to install Vista and a few times I got errors (BSoD) STOP and a few other times, Windows Installer errors.

  What's wrong?

  I run Dell diagnostics that took almost a whole day, but I don't think anything. I have not partitioned the hard drive, it's like 931 GB.

  I think that may be something related to the RAM, but I'm not sure.

  Thanks for any help.

  Hello

  Here is the information on the Dell Diagnostics:

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=52057

  And Dell has provided information on how to reinstall Vsta using their recovery disks.

  "Manually reinstall your Windows Vista operating system"

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&CS=19&l=en&s=DHS&docid=DSN_339949&isLegacy=true

  For more information, try the Dell Support Forums.

  http://en.community.Dell.com/support-forums/default.aspx

  See you soon.

• came loaded with Windows Vista Home Premium. Recently, I reformatted the hard drive and did a clean installation of Windows 7 Professional. I have no games. No solitaire, Minesweeper, no nothing.

  original title: lack of games
  I have an Acer Aspire PC. It came loaded with Windows Vista Home Premium. Recently, I reformatted the hard drive and did a clean installation of Windows 7 Professional.

  I have no games. No solitaire, Minesweeper, no nothing.
  How can I, without seeking to erase and reinstall again?

  To activate the built-in Windows 7 games:

  1. click on Start (lower-left) and then on Control Panel.

  2. click on programs and features.

  3. on the left side of the screen, click on 'Windows turn features on or off".

  4. find the entry called games & check the box next to it.

  5. click on OK.

  6 reset.

  If the games box is already checked, uncheck the box , click OK, restart, then do steps 1-6 above.

• WinHlp32 installation fails vista Home premium

  When you browse through the installation of WINHLP32.exe on my VISTA Home Premium SP2 installation research updates for awhile then concludes not valid for my system.

  I installed the X 86 version after removal of all prior downloads

  Downloaded to the desktop

  Started cold

  Execution of Setup and all combinations and it does the same thing every time.

  It seems that it is looking for some update it finds!

  Clues

  Thank you

  Thanks for the info. I should have realized admin was easily accessible.

  Most tellingly, it is that MS may send one on a wild goose chase!

  Let's not the message about the inability for my system.

  On a whim I checked if WINHLP32.exe was on my machine and what you know, its there and works.

  I have discovered some mistakes of not crirical on the audit of the system, but they can wait another day.

  SOooo. First Council must be check if winhlp32.exe has been downloaded, abd it works!

  So ignore the inappropriate if message is.

  Thank you all for your help

• Installation of Age of Empires (gold) on a Vista Home premium OS.

  I have Age of Empires Gold Edition I bought quite earlier.

  After having moved the House and updated my pc I tried to install it on my new laptop. It is running Vista Home premium. The program works through installation installed 100% and then stops. Close the window by using 'X' and then when you start it tells me to insert the correct disk (because it deleted the files installed during the closure of the facility). Gold is not compatible with vista?

  Thank you

  I think it should work.  Try, right click on the installer and choose "Run as Administrator" and see if it works for you.

• Vista Home Premium SP2 installation problems

  SP2 says its installed but Windows Update shows it as an available update. When I view the system information, it still shows only installed SP1. I tried the standalone install and I got error 0 X 80070564 connection failed. SP2 shows as has been properly installed on Windows updates the history but it shows also the lack of installation after 2-3 hours to install, restart, then back to sp1. I stop all AV, Spyware, adware, Windows Defender by other items on the SP2 installation problems. I also ran system preparation and the System File Checker. I am running Vista Home Premium 32 bit on computer laptop HP DV5 Dual Core. I have not found anything on the failure error connection displayed in the standalone sp2 update.

  Hello vinniegolf, welcome.

  I would recommend trying to create a new user account with administrative privlages and you try to upgrade to SP2 from here. This will tell us if it has something to do with the internal components of your user account.
  You can create an account via START > Control Panel > users
  Let us know what happens
  
  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I've upgraded from vista home premium to windows 7 Professional and had to do a custom installation

  I've upgraded from vista home premium to windows 7 Professional and had to do an installation custom and lost all my Hp software, HP Advisior, PC doctor among others. Is there a way to get them without reinstalling everything again

  Here are the specifications of your HP Pavilion Media Center m8120n desktop. According to specifications, your computer comes with the following software factory installed;

  Windows Vista Home Premium (32 bit)

  Roxio Creator Basic 9

  Roxio MyDVD 9 Basic

  (Not available in Canada French) Rhapsody

  Real Player

  My HP Games (not available in French Canada)

  Adobe Reader

  Microsoft Works 8

  Microsoft Office Home and Student 2007 trial edition

  HP Photosmart Essential 2

  muvee autoProducer 6

  Norton Internet Security 2007 (60-day security update subscription)

  HP Hardware Diagnostic tools

  If you don't create HP recovery discs for your m8120n, you can buy a set of ComputerSurgeons.com for $27. You will find the software included in the HP disc #1 folder.

• Why Windows Vista Home Premium 32-bit installs not Windows updates?

  I am not able to download and install Windows Vista Home Premium 32 bit windows update.  This Gateway laptop has always been able to quickly and easily install the update by clicking windows update.  However, since the introduction of Windows 10 it has been a lot of your time trying to install updates.  I had this same problem with Windows 7 too.  Never before there was no problem for the two operating systems.  Installation of Windows updates has always been easy and fast without any problem.  Running the troubleshooting isn't good and hunting error codes has been unproductive.  What the hell is happening?

  Hi Joe Cool1:

  'Check for updates...' crashes and slow Windows updates currently affect the SP2 for Vista and Win 7 SP1 users, and I doubt it's a coincidence that Microsoft has ended mainstream support and only provides support for these two operating systems.  The evidence points more to a problem with the Windows Update Agent (WUA Vista, C:\Windows\system32\wuaueng.dll v7.6.7600.256 has not been updated since June 2012) and the problem tends to be more prevalent on computers with slower processors and a limited amount of RAM.

  There are step-by-step instructions posted on 16 June 2016 wire m #l's updates doesn't work do not, he has been looking for updates to the hours which should speed up Windows Update for both for Win 7 SP1 and SP2 for Vista.  The instructions were for users of Vista, so when you reach step 4 just use the appropriate links of Win 7 on the page Web of Dalia http://wu.krelay.de/en/ (Win 7 x 64 if you have 64-bit Win 7 OS;) Win 7 x 86 if you have a 32-bit Win 7 OS) to download packages update stand-alone correct (.msu files) for missing Windows kernel mode driver (Win32K.sys) updates on your Win 7 machine.

  You can also find some useful tips in entry 9 August 2016 Microsoft MVP Woody Leonhard on his Woody on Windows InfoWorld blog titled 2 easy steps to speed up scans of Windows 7 update that includes detailed instructions for the use of circumvention of Dalai to http://wu.krelay.de/en/.  Woody's workaround for Dalai to speed up Windows Update to users as well Win 7 SP1 and SP2 for Vista.

  ------------
  32 bit Vista Home Premium SP2 * Firefox v48.0.1 * NIS v22.7.1.32 * MMFA Premium v2.2.1
  HP Pavilion dv6835ca Intel Core2Duo T5550 1.83 GHz, 3 GB RAM, NVIDIA GeForce 8400 M GS

• Installation installation of Win Vista Home premium error Windows errors can not reset the deployment engine. to install windows, restart the installation.

  Original title: Error Installing Win Vista Home premium.

  I have a PC with Windows Vista Home Premium.  Suddenly, it wouldn't start.  I changed the boot CD ROM and put my Vista disc in and tried to do a "repair" that it came with missing engine or something like this.  After several attempts, I gave up and formatted hard drive losing all my data and programs (rather difficult to backup files when the computer does not start).  So, I tried a complete installation.  I put in the license code and he started the installation.  After a few minutes, the message came;  "Windows Setup could not reset the deployment engine.  to install windows, restart the installation.  I tried several times including completely turn off the computer for several minutes and try again.  I tried several times.  I thought oh well, I will install my Windows 7 program (this and never used).  Error on this installation was: your CPU is only good for 32 bit and Win 7 I have is a 64-bit version.  I'D RATHER INSTALL VISTA BUT need help on the error regarding the deployment engine.  Thank you, Lloyd

  Hello

  See if this solution works for you:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/Windows-Setup-could-not-reinitialize-the/f9e6f3e6-EA80-487F-8d86-36c793f7c152

  See you soon.

• Vista home premium, new hard drive, recovery "windows installation error.

  Pavilion m9340f Vista Home premium.

  original hard drive & replacement two seagate barracuda SATA

  "installation of windows could not configure windows to run on a hardware on this computer."

  After the disk crash, replaced the hard drive.

  Using Vista Home Premium SP1 recovery disks (disk w / extra) HP, has begun to recovery.

  First step was to run the tools, test drive.  Seek and scan spent.

  Put 1 in the drive and powered drive, then on it.

  Bridged system restore and went to recovery.

  All the drives used, including the additional disk.  Everything is OK

  reformat & reinstalling original content OK

  "Complete recovery" & restart OK

  Opens the window with 'startnet.command', 'building the partition' appears

  With "HP Flexbuild 2.0"appears, and then restart

  "Windows Setup" starts.

  copy of files OK

  extension of the files OK

  installation of OK features

  installation of updates OK

  end of installation - it is here that the window with the ' installation of windows... neck material. appears

  I have no idea where to go from here.  Seagate, told me to "call HP.  Support HP told me to buy another machine, although I had to pay for the support.  This forum and Microsoft are my last hope.

  Can someone PLEASE suggest something.  I can't just throw this machine.

  PROBLEM SOLVED!

  Dig kept and article found

  "

  Can not recover the PC after replacing the hard drive with a drive AF (Windows 7 and Vista)

  http://support.HP.com/us-en/document/c03509131

  I had an old WD 1 TB drive is not AF.  Put it in and everything worked fine.