Installation of GPU on R730

Similar Questions

• HP ENVY updates the Stock

  Hello world!

  Recently I bought a HP Envy 700-230ae PC (I7-4770, 16 b of ram, 2 TB, AMD Radeon R9 270), and type of, I now regret buying it.

  I have a few question, I think change power for this PC, seeking power supply Corsair 750watts but only concern is that I'm not sure it fits in this case, any suggestion about the power supply must be min 600watts + (due to longer will graphics card) and fully modular prefferebly!

  Also, I want to update a graphics standard R9 270 of 2 GB of memory, something as NVIDIA 770/780 graphic map of the subject 2-4 GB of memory, so need to be compatible with the standard motherboard this PC has (Hewlett-Packard 2AF3) or there will be problems with the power supply electrical installation and GPU?

  IF none of these things can be changed it would be easier just to the buyer a case (NZXT H440) and it just buy new PSU, GPU and card mother, as well as RAM eventually!

  Please help me, really appreciate it!

  Thank you!

  Unk0wnPr0, welcome to the forum.

  Corsair 750W (PSU) power should work properly.  The best way to be sure is to measure the existing PSU and compare the measurements to the one you choose.  A modular power supply is a good choice, since it is sufficient to use the necessary cables.  This allows for better air circulation.

  770/780 GTX graphics cards that I looked at are 10.5 "long.  It is doubtful that either will be insert in the space provided.  You can make a model, the length of the card and try it in space.  It should fit all by allowing room for a good air circulation.  Air flow is very important, especially when the games.  Components tend to be warmer than normal.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Strange game Lag

  Hi, I have problems with strange lag in games on my doalboot machine. I have Windows 7 Ultimate 64-bit and Windows XP 32-bit professional from my OS 2 - nd. Now, some recent games work better that old games on Win7.For Examle COD 4 MW is more offset than COD 4 MW3, more that the first is on the lower settings. COD 4 MW, trying to run on 1280 x 1024 75 Hz all low or off is MUCH more laggy than COD 4 MW 3 on 1920 x 1080 all settings at maximum. On Windows XP, COD 4 works better than in Windows 7, but at one time given time, the game crashes and continues to run, but lagging a lot more. The Ministry of HEALTH: Airborne, the accident caused all the textures get bugged. (in XP). Because COD 4 MW1 unraced since missing a .dll error early, I reinstalled Directx 9 .0c on the MS. Web site web installer The GPU is with latest drivers out yesterday and Geforce experience, which does not support XP. The Physx software is old because MOH: Airborne cannot run with latest Physx.

  My computer specs:

  Intel Core i3 3220 3.3 GHz

  8 GB DDR3 1600 MHz

  NVIDIA Geforce GT 610 2GB

  ASRock H61M-DGS

  2 TB HARD DRIVE

  Note: I have overcklock my GPU with Palit base - 810 MHZ and memory-535 MHz Core about Thundermaster 1006 and 603 Mhz memory.

  Note: I have overcklock my GPU with Palit base - 810 MHZ and memory-535 MHz Core about Thundermaster 1006 and 603 Mhz memory.

  Please turn off overclocking and check. It is recommended to not not any component hardware overclock without cooling solution appropriate (for example, to improve the cooling with coolant). Unless appropriate cooling solutions is deployed, overclocking questions, rather than increasing performance.

• Pavilion 500-420nl: installation of a new GPU in HP Pavilion 500-420nl

  Hello everybody, basically, I bought a HP Pavilion 500-420nl PC and decided to improve a bit with a new power SUPPLY and GPU. The new PSU: Thermaltake Berlin 630W and the GPU is Sapphire R9 270 X double-X OC. The problem is that when I insert the GPU and connect the 2 connectors of 6 pins, I get only a black screen. There is no beeps, the fan runs but the screen remains black. I deleted the old GPU drivers and the new one is plugged correctly, but there is only a black screen. The motherboard should be compatible with the GPU, seeing that it has a PCI-E x 16 slot 3.0. What could be the problem?

  Hello

  Please see the following documents.

  HP Secure Boot Windows 8 themes Computer does not start after the installation of a video (Windows 8) card  

• Following installation failure of downloaded Windows Update driver Nvidia card GPU Nvidia GeForce 9300 GE has been disabled. He assigned course graphics and other functions of PC. How to rectify?

  HP Pavilion Slimline PC running Vista Home Premium

  Windows automatic update notification 'important' Nvidia driver initiated and displayed as usual with the Update window. Selected update and install Insider. Install showing failure error code 800F00ID. Many attempts failed to install the update. Have materialized with various protocols of the device without result Manager driver. Somewhere between the installation failed and the computer restart function disabled graphics card and had a

  ripple effect to the resolution of General screen graphics including the proportions and a few other PC functions. Namely display screen/auto sleep never well chosen the management of food etc and also the PC fails to "sleep mode" when you are asked. PC should be shut down completely and then activated as and when. This rest and reboot etc update installation tries to install without success. Guidance through the online help with HP and Nvidia has proved impossible and worse still a voice call to 'aid' to HP UK sourcing is another story.

  Hello again Srinivas

  Thank you for the continued upward. The good news is that I set the graphics in pursuing the protocols of computers own recovery, which restores the GPU "settings". Before that, I lost online due to a faulty firewall communication. I've been having fun in recovery / repair mode for days. Communication restored, restored and graphics for the time being at peace with the world... Thanks again

• R730 Dell with the consumer GPU class

  Hey,.

  Although it is not officially supported, I'd be able to install a consumer GPU like 980GTX or Titan X rank in one of these (configured with a thermal profile for 2CPUs) + GPU?

  I've done it before on R720 with GTX Titan and it works very well. Should I worry (like the space inside the server)?

  Thank you

  Nick

  Hello

  We have a number of machines R730 with two Titan X per machine, which works very well.

  Best,

  Jakob

• PowerEdge T630 'missing GPU installation kit.

  Hello

  We finally received the T630 P.EDGE server.

  But during the ordering process, our Dell reseller forget GPU Kit installation, needed to power our Titan X GPU 3. (we already have 2 x 1600 watts PSU installed)

  And I know this must be "factory-installed".

  I contacted the service Dell cares Pro on twitter, and at first they said that the only solution is to buy spare parts of the GPU installation kit and try a 'solution' to the problem.

  I found an interesting thread on the problems of Dell PEdge, on spicework.com and a user had the same problem, forget the GPU kit, sent back the server and received a new GPU installed Kit.

  So what we can do to solve our problem?

  1: open a ticket and we hope a positive response from Dell? (already done, we are waiting)

  2: ordering spare parts and try to solve the problem ourselves?

  I have to admit that 'Dell care PRO' finally responded quickly to our problem, but given that our company is located in Italy, we have to work with the 'Italian customer DELL Service of care '.

  The Italian Dell dealer have no problem to repackage the server and sent to Dell.

  But we tried about 10 times Friday to contact DELL customer service by phone at Milan, but we had no chance.

  Sorry for my bad English.

  And thank you all for reading.

  Hello again

  I have already answered this question on Twitter. Ask another medium will not change my answer:

  https://Twitter.com/Matteo79056944/status/708564396172320768

  MTT78

  I contacted the service Dell cares Pro on twitter, and at first they said that the only solution is to buy spare parts of the GPU installation kit and try a 'solution' to the problem.

  No, this is not what I said. I said that it would be better to work with the dealer to order the correct system.

  MTT78

  The Italian Dell dealer have no problem to repackage the server and sent to Dell.

  But we tried about 10 times Friday to contact DELL customer service by phone at Milan, but we had no chance.

  Resellers cannot return the material for a refund, and we do not have any kind of return-to-depot updates our servers. The system will have to be refunded and rearranged to order the kit GPU.

  Since you are likely to encounter problems, get a refund system ordered from a dealer that I have provided the numbers of pieces, you will need to get a GPU in the system. Perhaps this is your only option.

  There are many ways that dealers sell systems to customers. Our resellers buy equipment directly from us and resell it to their customers. There are resellers that simply gathering quotes and have their customers to order the equipment directly. I do not consider any kind of sale apart from when a dealer us buys and resells for a purchase of reseller. Any other form of purchase is a service of consultation and not a resale.

  If the dealer purchased from us and then resold to you then they will need to contact us regarding the return/refund. You shouldn't be contacting customer service for a refund in this scenario, because you don't give us money to repay. The return is between us and the dealer, and part of the dealer contract is that they are not allowed returns/refunds. If you paid us directly for the system, then you should be contacting customer service to request a return/refund.

  Return and reorder the correct system are your best option. If this option is not available, you can try ordering part numbers, I have provided and install them yourself. GPU kits are not supported as an upgrade of the apres-point of sales, so it is not a kit or a process to perform the upgrade. The parts that I have provided are based on my search of the documentation available to me. There is also no guarantee that parts will be available for purchase.

  Thank you

• HP Envy 700-406: installation of a GPU...

  I just got a new GPU for my desire and while it fits, for the life of me I can't find the place to plug in so it gets power. I looked at the specs of the motherboard and also real life nothing will do. I'm practically ripping my hair out in frustration and I look for him. Thanks for any help. It's a RAdeon R7 265 if that helps.

  You need a new power supply that has a 6 - pin pcie power connector. This pc came only with a 300w power supply and that's why you can't find the connector appropriate for this card. Supply current do not have nor support it.

• GPU Quadro 4000 installation on HP pavilion Desktop m9540ch... Worried about the power specification

  Hello

  I want to install a card nvidia quadro 4000 graphic on Hp pavilion m9540ch desktop PC. I opened the desktop chassis and I found that there is no auxiliary 6-pin power connector coming from the power supply. I'll buy this connector 'double 4-pin Molex-8 pin PCI-E adapt' to provide power to Quadro 4000 GPU. Now, I wonder if my power (300 W) can support GPU (80W). My question is, how can I see or know the average power consumption of my Hp pavilion m 9540ch PC? Is there a document which can explain the total power consumption of this PC or there at - it a utility to monitor the total power consumption on windows 7?

  Thank you very much in advance for your suggestions and comments.

  Hello

  Thanks for the solution. It worked well.

  Best regards

• HP 250: how to solve "The GPU - passage to the fbcon software lock" on the new installation of the 12.10 - desktop-amd64

  Error occurs when you start the Installation of Ubuntu. Sometimes I'll get to the right welcome screen, the screen will glitch just outside, or be simply gel during the loading icon.

  • NVIDIA GTS 250
  • Intel Core i7 920
  • 9 GB memory

  I was able to install 12.04.1, , but after completing the upgrade to 12.10 she get the same problem at startup. Glitches in graphics, lack of content etc. Also noticed after the upgrade, I am no longer able to connect to the internet; Ethernet or WiFi.

  Boot using a live disc. Hold the SHIFT key to get start. options You should get a menu to try Ubuntu before installation, installation on disk etc etc. Press F6 and select nomodeset, then press ESC. Choose the desired startup option. If you get in you will probably need the driver owner for you the card.

• PC does not start after the installation of the new gpu (GTX Gigabyte 770 2 GB)

  Hi, I just bought a 770 2 gb gigabyte gtx and my pc is stuck in the bios screen and beep every 10 seconds, I think that the version of the bios or the pcie is not quite new

  Data sheet: HP - Pavilion h8-1040

  Mobo: Pegatron IPISB-CH2 (Chicago)

  Intel core i7-2600 3.40 ghz

  10 GB of ram DDR3

  650W PSU

  If its my motherboard what motherboard will u recomanded stay that fits my case, GPU, ram and processor

  THX in advance (im french sory for bad English)

  Hello again @nitrox,

  Unfortunately, I can't make a specific recommendation on a motherboard. I can however advise you to make sure that the motherboard that you buy not if you are going to use the same case is a form of plant uATZ and if you want to use the graphics card you bought ensure you that the motheboard has PCIe 3.0 expanstion slots. You'll also shop for a new processor and RAM probably as well. Shop and you can find packages where a motherboard, processor and RAM are all included.

  I hope this helps. Have a great day and thanks again for the display on the HP Forums.

• Accerlation GPU not available after the installation of update 2014.2

  Hi all:

  -Pro Pre cc 2014 worked well-

  - then I updated to 2014.2

  and since then the CUDA message not aivailable - software only... (the wording is different, but you know what I mean + it's in German anyway...)

  someone has any idea what could be the problem?

  -Have a NVIDIA GTX 750 M Windows OS 8.1 update yesterday

  Thank you for any assistance.

  At SG soon

  Problem solved:

  I installed the latest nvidia driver and - it works now...

  in any case, the surface of the user is still different, I don't know if this should be an improvement of the update or if it is still a problem with my software...

  brgds

  SG

• No AMD GPU after upgrade to win 10 - Satellite-S50-B-15 q

  Hello, I have a fairly serious problem on a satellite (new) S50-B-15 q

  After the upgrade to Windows 10 and re-installing Windows (including all the necessary drivers) Amd Radeon R7 m260 graphics card does not appear
  I tried to install drivers from amd available on the Toshiba site, first, then some directly to amd. I had a hard time because the driver installation (kept getting the "package installation failed" error), but even now that they are 'installation', the amd radeon does not appear in Device Manager (and not at all either no longer works).

  All I get in the graphics cards is the integrated gpu (Intel HD Graphics 5500), I tried to launch a program to use graphic resources to see if he would "pass" to amd, but this is not (it was a piece of advice found on a forum)

  I have already spent a lot of time on this problem and would really appreciate help

  Posted by Manuel Pace
  

  Hello, I have a fairly serious problem on a satellite (new) S50-B-15 q

  After the upgrade to Windows 10 and re-installing Windows (including all the necessary drivers) Amd Radeon R7 m260 graphics card does not appear
  I tried to install drivers from amd available on the Toshiba site, first, then some directly to amd. I had a hard time because the driver installation (kept getting the "package installation failed" error), but even now that they are 'installation', the amd radeon does not appear in Device Manager (and not at all either no longer works).

  All I get in the graphics cards is the integrated gpu (Intel HD Graphics 5500), I tried to launch a program to use graphic resources to see if he would "pass" to amd, but this is not (it was a piece of advice found on a forum)

  I have already spent a lot of time on this problem and would really appreciate help

  Hi, I have this same problem and have spent hours trying to solve this problem. And nothing is done, the Toshiba do not have a solution. Have you managed to solve this problem yet?

• Satellite M50D - A - 10 L - installation of Windows 7 UEFI

  I m trying to install Windows 7 on TOSHIBA Satellite M50D - A - 10 L with UEFI boot.

  First time I used facility with CSM Boot EFI and it worked fine.

  But after I tried to spend in UEFI and make the installation of UEFI, whenever it starts loading setup files and after freez windows on "Starting Windows" screen.

  I have two pieces of these ultrabooks and they do the same thing.

  I used Flash disk, USB CD-ROM, two different versions of windows 7, but it have same endpoint...

  Secure boot is disabled

  I've got a Satellite M50 - A model (its similar to the M50D-A, but it was equipped with instead of ATI GPU nVidia GPU) and able to install the Windows 7 change the start mode MSC mode.

  Generally the UEFI boot mode can only be used for the system support UEFI as Win 8 or 8.1 win and some Linux distributions.
  Win 7 isn't taking system support UEFI.

  However, there are various workarounds to install Win 7 64 bit (not 32-bit) in the UEFI using the partitionstable GUID (GPT). Win 7 64 bit only contains the UEFI boot loader.

  But, very important is that UEFI installation isn t available (by default) is booting from USB due to lack of uefi boot loader! In case you use the key of USB for installation, you must add the UEFI (search in google for details) Start menu.

  Finally and above all depends on BIOS support in the case where the BIOS would only mode Setup CSM; all of these solutions workaround would be unnecessary.

• Bootcamp AMD update / update of GPU said always up to date.

  If this is not a new installation and I don't have an apple update in a long time. I mean... For a long time, so today when I saw the soft software update Apple pops up saying that I had an update, I'm super excited. I installed the update first graph (after you have uninstalled my previous gpu driver). It is installed, and then he said that it was an update of bootcamp ('supports 5 k on windows, addresses the problem of blocking' etc.). I installed as well. Now she she wants to reinstall the GPU drivers. I moved and you did... Now, he wants me to install the bootcamp update. I did it once again. Now, he wants me to redo the GPU DRIVERS. Alright... and now we are back to it asks me to install the bootcamp update. What is going on?

  In addition, these drivers seem to be kind of old. The driver date says 09/02/2016. In Radeon settings, he calls the 15.11. These are former pilots.

  I use an iMac k 5 from 2014. GPU is AMD 295. Windows 10.

  Save me LonerT!

  Having this same problem too, same system configuration (2014 5 k iMac, 295 AMD, Windows 10), only I didn't first uninstall the previous driver GPU. 09/02/2016 are the new drivers of Boot Camp from Apple standards. I think that the previous engines have been since October 2015.

  The update installed an AMD Radeon settings in the status system in addition to the AMD Catalyst Control Center bar. Everything seems to work fine graphics-wise... the only problem is with the infinite loop put up-to-date problem with Apple Software Update.