installation of leopard to Mac using Vmware workstation/server

Similar Questions

• Running the VCS 4 and ESX 4 and computer virtual on a PC using VMWare Workstation 7.01

  Hello

  I could not install on my PC Windows 7.01 vCenter. I was getting a "28035.Setup error". I was told that you can run vcs on a virtual machine, so I decided to create a machine virtual W2K3 just for my VCS. I have 1 VM ESX 4.0 and 1 VCS 4.0 VM on my PC. I'm using VMWare Workstation 7 to join my VM and vSphere Client on the desktop. How can I run VCS? Normally, it will show on vShere customer. Do I need to reinstall from the CD of vCenter? Any ideas? Thank you.

  When I try to add my vcs on the domain controller server

  I don't understand exactly what you are trying to add?

  Basically, what you need to run a test environment is:

  -a domain with DNS controller and - if you want - DHCP

  -Member Server windows on which you are installing vCenter Server

  -one or more host ESX (i)

  On your client, you must install the vSphere Client and connect to the server vCenter Server by using your credentials of the AD. Using the vSphere Client, you can add hosts ESX(I) and your installation configuration.

  André

• Workstation 8 vmware-workstation-server works not not on Ubuntu 11.10

  Hi people:

  Just, I have upgraded my Ubuntu 10.10 to 11.10 and replaced VMWare Server 2.0 with Workstation 8.02.  It seems that the vmware-workstation-server service is not running.  I'm unable to connect from a web page and the application vmware itself is not able to connect.  When I try to activate the dialog application vmware service I get the following messages in the terminal window where I ran vmware:

  update root@naplesubuntu:~#-rc.d: WARNING: /etc/init.d/vmware-workstation-server LSB missing information
  update - see rc.d: < http://wiki.debian.org/LSBInitScripts >
  Adding system for etc/init.d/vmware-workstation-server start...
  /etc/rc0.d/K01vmware-workstation-server->... /init.d/VMware-Workstation-Server
  /etc/RC6.d/K01vmware-workstation-server->... /init.d/VMware-Workstation-Server
  /etc/RC2.d/S03vmware-workstation-server->... /init.d/VMware-Workstation-Server
  /etc/rc3.d/S03vmware-workstation-server->... /init.d/VMware-Workstation-Server
  /etc/RC4.d/S03vmware-workstation-server->... /init.d/VMware-Workstation-Server
  From Workstation Server: fact

  If I disable the vmware application service, I get the following in the terminal window:

  root@naplesubuntu:~# remove any links of the system for etc/init.d/vmware-workstation-server...
  /etc/rc0.d/K01vmware-workstation-server
  /etc/RC2.d/S03vmware-workstation-server
  /etc/rc3.d/S03vmware-workstation-server
  /etc/RC4.d/S03vmware-workstation-server
  /etc/RC6.d/K01vmware-workstation-server
  Stop server workstation: fact

  If I believe that the service is running, but not doing anything, even though I do not see a specific process for this and there seems to be a vmware-workstation-server executable in/usr/bin.

  Not very well where to go from here.   I tried to uninstall and reinstall the workstation and even using a different port number for the Desktop server, but without any result.

  Suggestions welcome.

  Are you running other services on port 443 on this host?

• The VMware Workstation Server service stopped with service specific error %-1.

  Hi, when I try to enable sharing in Workstation 8 GTR | Change | Preferences | Sharing virtual machines, I get an error Impossible to configure the workstation server. Check the event log, I found they were trying to start the VMware Workstation Server service that does not start (even when you try to start it manually) and the following error is recorded "the VMware Workstation Server service stopped with service specific error %-1." by the Service Control Manager. I found no additional cases related.

  Running on Windows 7 SP1 x 64. The port is set to 7443.

  I also tried to find a newspaper there instead of vmware, but neither found anything related; However I could have missed something.

  Thanks for all the ideas, what could be wrong and how to fix it.

  Hello

  I have Workstation 8.0.1 installed on two laptop computers each running Windows 7 SP1 x 64... the shared component of the virtual machine runs on one but not the other. On the machine that I have problems with I uninstalled Workstation and reinstalled - without success. What I ended up doing to replace the datastores.xml file in the Directory go (C:\Documents and Settings\All Users\Application Data\VMware\hostd) on the laptop with the problem with the file datastores.xml of the laptop that works - success! I knew that there was a problem with the file because I've been poking around and noticed that the datastores.xml file is not open for editing - it was corrupted.

  I have attached the file to this message.

  Change of the section at the location that you store your shared VM (be sure to not use a UNC, which breaks the service as well!).

  I hope this helps.

  Steve

• Qosmio F50-111: control buttons stopped working using VMWARE Workstation

  Hello

  Since I've installed VMWARE Workstation v6.0.3, my touch buttons (play, pause, stop, media library, next, previous, updated muted and light webcam and dolby) stopped working.

  So I chose Restore my Vista before installing on my VMWARE of ve. It works again my buttons work...

  BUT I need to install this software (vmware) for my use of employment.

  I've tried remove and install then new value-added Package from Toshiba Web site, but it does not work.

  Please help me

  This means that applications (in TBS folder, such as TDspBtn.exe, TBSbtnSt.exe,...) start running, but stops immediately.

  Thank you for coming to help

  Here the solution:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=181231

  + After the installation of vmware workstation 6.x or 7 - the default setting is "Disable Autorun on the host". (you can find it in: Edit-> preferences-> devices). +
  + Clear hook and restart. After the reboot, the buttons should be working. +

• Move a machine virtual in Vmware Fusion (Mac) of Vmware Workstation (PC)

  I guess that most people worry about how to move a virtual machine from the PC to Mac. I have exactly the opposite need.

  Will there be a way to migrate toward the back of the Mac to the PC? VMware Workstation recognizes as virtual machines created with the merger?

  I agree with etung provide a list of files.  The virtual machine has been turned off when you have copied the disk NTFS?  Do you have pictures?  I usually don't use snapshots and always make sure that the virtual machine is turned off before changing platforms, but the error message sounds like you can't be in the same State before performing the copy.

• Failed to create virtual machine using VMWare Workstation 11 (test)

  Hello people,

  I installed VMWare Workstation on my machine Windows 10 and trying to create multiple virtual machines to test the object. I have done this before on the Windows 7 computer and did not face any problems, but this time, as soon as I gave the location of the file to deploy an operating system it comes up with some fatal errors as error BLK_CACHE IOERR if I have enough space on the HARD drive and everything is not going further. So, my question is if my computer has compatible with Windows 10 problems or there is something else that would cause this problem. Any help or comments would be appreciated on this topic.

  Thank you!.

  Thanks for your answer, Noel

  I was going through discussions in the community with similar and found subjects that VMWare had released 12 pro workstation that supports Windows 10 entirely. I personally installed it on my physical machine and it works. Here is the link for the release of Workstation 12 notes.

  VMware Workstation 12 Pro Release Notes

• Could View Client local Mode use "VMware workstation?

  Hi all

  I want to test the function transfer server and install the Client with local mode, but it shows a message as an attachment

  Because I didn't not use local mode still works, if I have a question, is the image of the local mode could used "VMware Worksatation?

  

  Thank you!!

  wyldkao

  Yes, localmode is using a modified version of VMware Player/desktop to virtual computer runs locally and is in conflict with a version installed locally.

  Linjo

• Can I use VMWARE Workstation 8 for...

  Installation of SBS 2011 Essentials as a virtual machine?  Or do I have to use another product VMWare?

  I already tried but the OS will not install and Setup log shows that it is the size of the partition that is the problem. I tried 20GB, 30GB and 40GB so I wonder if another virtual machine product can help you.

  Thank you!

  I tried 20GB, 30GB and 40GB

  Windows Small Business Server 2011 Essentials system requirements , one of the conditions is "at least one160 GB hard drive".

• Fusion records instant non-OS on a different computer using VMWare Workstation 11 virtual

  I recently had a guest OS VM frequently crash that had some shots that are associated with.  I had an OS VMDK disk as a secondary data VMDK disk.  I couldn't go back to the snapshot because it would mean that I would lose all my data on my disk of secondary data.

  I look forward moved and deleted from the OS disk drives data to another guest VM VMDK and attempted to use it only to see all the files on the secondary data disk.

  However, when I tried to mount the drive of secondary data in a guest VM, I couldn't so to find all the files in the snapshot.

  Is it possible for me to merge the data between the 2 shots in the drive to have a single consolidated file?

  I tried to try to run a command in r - vmware - vdiskmanager.exe, but I think that the parent disk has been converted to a newer version, so he put the 2 discs out of sync and I got this error message:

  VMware - vdiskmanager.exe: VixDiskLib: invalid configuration file setting. Failed to read the configuration file.

  Cannot convert the disc: the virtual disk parent has changed since the child was created. Content of the virtual disk that ID does not match the ID of parent to the child to the parents content

  (0x3e88).

  Please advise as to how to get these consolidated data between my photos on my secondary data disk.

  Can please provide an example of how to do this using the dsfi.exe command because I'm not familiar with this command and the documentation on the site doesn't seem to much enlighten on how to accomplish what you have described in your answer.

  Thanks again.  Your help is greatly appreciated.

  Post edited by: vmwarejockey

  Assuming that you have checked the first 1536 bytes using dsfo.exe, backup and then edit this file and then use dsfi.exe to inject the file changed in the hard file again by using the following syntax:

  DFC

  for example: DFC.exe vmname.vmdk 1536 0 modified_file.bin

  Prior to the injection of the modified file, check that it sill has the same size and allows to check that only the parentCID has been changed e.g. fc/b extracted_file.bin modified_file.bin .

  André

• installation of the agent on the vmware ESX Server

  Hi, im trying to install the agent 2.7.6 on an esx server of vmware 3.01, somehow, the agent does not connect to the administration server, I opened the ports on the firewall of esx with esxcfg-firewall - openport port 7443 and 2144 but I still can not the agent to connect to the management server... everything I forget?
  
  Rgds

  Hi Nicky,

  We will clear up the confusion of port for the next version.  Regarding
  availability be yellow, I believe that it is through the combination
  the VMware API in 3.0 is much slower than ESX 2 times 20
  VMS exposes this recently fixed issue: http://jira.hyperic.com/browse/
  HHQ-437

  You can find a patch fixed the issue that should solve your
  lights of availability.  Let us know if that helps.  It is also possible
  to reduce the memory usage by disabling the plugins that vmware
  Buy adding to agent.properties:

  plugins.include = VMware

  You can also change the max heap size in agent.properties:
  agent.javaOpts =-Xmx128m

  On 15 January 2007, at 03:52, Haan Nicky wrote:

  > okay... It's already better... but first, autodetect didn t
  > work for hyperic settings, when you try to set it to 0 for the port.
  > He complains the port must be between 1 and 65535.
  > change the settings on the execution of the agent already has failed
  > either, so I killed the admin machine and deleted data
  > folder on the computer of the agent, after the reset and the
  > the right credentials and port 443 (Please note that the)
  > authd.client.port is 902... and not 443, check/etc/vmware/config
  > for this authd.client.port = '902', so I obviously thought that of
  (> What is necessary in the settings, maybe just state port 443 here?) I have
  > then started the inventory, which is quite long (10 minutes) and
  > memory and CPU was quite up on the esx Server (this is a double quad
  (> xeon machine with 16 concerts and about 20 vitrual machines running)...
  > the agent runs now, but somehow I think that the moment a large number,
  > availability is always on the yellow... I think that the agent
  > must refine even more here... on an esx 3.0 server there are only
  > 1 cpu and limited memory available for the linux Machinehote...
  > maybe it's not enough for the agent?
  >

• Installation of VMWare Workstation in Ubuntu [Hardy - Haron]

  Hello Gil,.

  I'm newbie in Linux. I was already using VMWare workstation in my windows.

  Now, I want to install the same version of http://Hardy - 8.04 Ubuntu linux.

  I was downloaded package VMware-Workstation - e.x.p - 240242.i386.bundle more here.

  Can anyone suggest me the steps for installation?

  Thank you.

  Hello

  You can follow this video. It shows how to install Workstation 6.5 on Ubuntu, but it should work for Workstation 7 also.

  Best wishes / Saludos.

  Pablo

  Please consider providing any useful answer. Thank you!! - Por favor considered premiar las useful responses. ¡¡MUCHAS gracias!

  Virtually noob blog

• VMware Workstation - Vista installation stops at "Completing Installation"

  I use VMware Workstation v6.5.3 build 685404.

  I try to install Vista business, an iso image located on my computer on a host machine virtual with 1024MB Ram and 16 GB on HDD.

  However, the installation will stop at the stage of the "end of the installation.  3 points after the words "end of installation" continues to scroll, but the installation never goes beyond this point.

  Any help in getting this to install entirely would be much appreciated.

  Thank you.

  16 GB of hard drive space seems very small. The amount of RAM, 1024 Mb, should be sufficient.

  How long the installation stall right there?

  What is the configuration of the host computer? (OS, memory Ram, size of hard drive,...)

• 5.5 R12.1.1 using VMware Linux installation

  I wanted to just make sure that I am following the right steps to perform my first installation on Linux (in fact will see the OS linux for the first time). I'm still to start the installation. I have just completed the preparation of the part...
  
  1 download R12.1.1 media pack (40 files about 45 GB) 64-bit
  2 downloaded VMware 2.0
  3 downloaded Oracle Linux 5.5 for 64 - Bit
  
  The current system configuration:
  OS: Windows 7 Home Premium
  RAM: 4 GB
  Hardrives: C 180 GB > D > 30 GB
  
  
  My question:
  
  1. I intend to install VMWare through VMWare install Linux in the D: drive and then use an external hard drive to install R12. It is the right way? or is it possible to install Linux on an external hard drive to my setup, it's completely portable like this? What is the best approach?
  2. can I unzip the R12.1.1 media pack and create a stage directory in windows 7 and then share this intermediate directory for linux in order to start the installation of R12 on Linux? or do I have to create an intermediate directory within the Linux environment?
  
  Other suggestions are greatly appreciated.

  Salvation;

  1 download R12.1.1 media pack (40 files about 45 GB) 64-bit

  Be sure to download the correct media pack (if your linux is 64-bit (x 86-64) that you need for the program to install 64-bit

  2 downloaded VMware 2.0

  You can use VMware workstation

  3 downloaded Oracle Linux 5.5 for 64 - Bit

  The current system configuration:
  OS: Windows 7 Home Premium
  RAM: 4 GB
  Hardrives: C 180 GB > D > 30 GB

  1. I intend to install VMWare through VMWare install Linux in the D: drive and then use an external hard drive to install R12. It is the right way? or is it possible to install Linux on an external hard drive to my setup, it's completely portable like this? What is the best approach?

  You can use the external hard drive and do not forget that you have almost 300 GB of space for installation of the DEMO, when you create a server Linux on WMmachine give more space than 300 GB

  2. can I unzip the R12.1.1 media pack and create a stage directory in windows 7 and then share this intermediate directory for linux in order to start the installation of R12 on Linux? or do I have to create an intermediate directory within the Linux environment?

  You can do this, or you can use the ftp program and move the scene to your VMware linux file and unzip it in there

  You can find more details on my block:
  http://heliosguneserol.WordPress.com/2010/06/11/Oracle-applications-12-1-1-installation-on-OEL-5/

  Respect of
  HELIOS

• Installation of Windows Server 2008 R2 on vmware workstation 9

  Hello

  I have a laptop with windows 7 OS and installed a VM with windows server 2008 R2 OS using vmware workstation 9. The thing is without creating any user, VM is turining IT with the user that I connected my laptop. Is that how it behaves.

  Generally, when install us windows server on a physical machine, he asks to open a session with the administrator by changing the password.

  Could someone let me know how to change this?

  Thanks in advance

  This problem occur if you select the OS install disc when the VM... in this way creating the VMware Workstation uses a feature called Easy Install, where you will be asked for more information, including the user credentials.

  To avoid using Easy Install, during the creation of the VM, on install, select "I will install the operating system later":

  

  To read more about Easy Install, check page 35: http://www.vmware.com/pdf/desktop/ws90-getting-started.pdf