help please, acer aspire R7 - 572 to very short range of wifi.

Similar Questions

• Please tell how to enable access to the Advanced BIOS - Acer Aspire E1-572

  Hello

  I recently bought an Acer Aspire E1-572 and come to find out that the BIOS has little information available.

  I need access to advanced options for virtualization support and would like to know how I can do this.

  Acer provide an update of the BIOS for this?

  Thanks a lot for your help.

  Ian

  Hello...

• Wireless connection drops after 10-20 seconds on Acer Aspire V3-572 - 56T 3 running Windows 8.1

  I have big problems with the network connection Wireless at the office. He sees the network, allows me to enter security credentials, then connects (with connectivity internet confirmed) but gave up after 10-20 seconds. I tried the wireless network to a friend who worked ok without interruption, is certainly nothing wrong with the hardware. I use a brand new Acer Aspire V3 - 572 - T 56, 3 on Windows 8.1, with all the latest drivers/patches loaded and tried to juggle with many advanced settings for the card of network without success. I connected the router to make sure that all the settings, encryption standards, channels etc was corresponding, but the problem is persistent. It has been going on for two days now and is driving me crazy because I really need to work in the office with wifi band. Plug an ethernet cable directly into the router works fine, but it is not the ideal solution (and poses a danger OH & S that he throws on the ground). Can someone help pleeeease!

  FYI, I ran diagnosis several times & the only thing that stands out was the following:

  Diagnostic information (wireless connectivity)
  The Association status: 0 x 00038002 failure
  Association reason code: 0x00000002

  Result of diagnosis: problem found
  Question: RNWF MSM Helper Class
  Root cause: Windows could not connect to "ERICSSON".
  You can try to connect again.

  Result of diagnosis: problem found

  Root cause:
  Failed to bind wireless to "ERICSSON".
  An answer is not from the router or access point.

  Detailed root cause:
  Failed to bind to this network wireless. Windows has not received response from the router or access point wireless.

  Repair option:
  Search for the causes of the low wireless signal quality
  The signal is weak because of the distance or interference.
  Windows Help and Support can provide more information on this problem.

  No need, already has the solution (which worked for me):

  The fix!
  (This is for windows 8.1)

  THIS bcm94313hmg2l IS ONLY for WINDOWS 8.1 and Broadom.

  -Right click on the Windows tile in the bottom left of the taskbar.
  -Open Device Manager.
  -Expand "network adapters."
  -Right click on your "Broadcom 802.11n Network Adapter.
  -"Update driver software".
  -"Browse my computer for driver software".

  THIS bcm94313hmg2l IS ONLY for WINDOWS 8.1 and Broadom.

  -"Let me pick from a list of drivers for devices on my computer.
  Uncheck "Show compatible hardware".
  -Scroll down on the "Manufacturer" for "Broadcom" Panel and select
  -Scroll down on the "network card:' and find"
  "Broadcom 802.11 Multiband Network adapt."
  -Select, and then click "next".

  THIS bcm94313hmg2l IS ONLY for WINDOWS 8.1 and Broadom.

  -Say yes to the "put to update driver Warning"
  -Close and you should be able to connect with elegance.

• Carriage of aftermarket for Acer Aspire E1-572-6676

  Hello I would like to install a 2nd hard drive where it should be a cdrom in my Acer aspire E1-572-6676

  There is a plastic tray, but it is not designed to receive a HDD (designers should think about scalability).

  But I see two small connectors at the other end of the slot, would they be msata ports?

  What can I use as a caddy hard drive to put a 2nd SATA not msata HDD?

  You need something like this:http://www.ebay.co.uk/itm/like/390822753540?limghlpsr=true&hlpv=2&ops=true&viphx=1&hlpht=true&lpid=1...

• Help finding Cortana please Acer Aspire E17

  Hello from England.

  I hope I'm in the right place, please excuse me if I'm not.

  I got a new laptop yesterday and while setting up, he just put in place Cprtine and someone came to my door, so I left the laptop for a few moments, hoping that waiting for me, but he'd ontosetting something else... I wibdows 10, already installed... and so sad, I do not see... Cortana you can help me find her please.

  Acer Aspire E 17

  Intel i3 cor

  8 GB memory

  1000 GB hard drive.

  I'm always learing windows10

  Thank you very much

  Barbara

  Press the logo windows + s

  type cortana

  the first result will be Cortana parameters.

• Need help with Acer Aspire please usb ports not working not

  I have an Acer Aspire V5 - 573G and usb ports have suddenly stopped working

  You must open the Device Manager, expand the Serial USB Controllers > right click on everthing listed under it, and then uninstall it.

  Then, restart the computer. All the uninstalled driver would be restored automatically by windows.

• Help! -Acer Aspire all-in-one touch screen after upgrade Windows 8 Pro

  Hi all!

  This is a rather confusing questions and about * me off no end!  I know that some of you may have encountered this already and could have a potential solution?

  I have an Acer Aspire all-in-one, AZ5101 (Aspire Z5101), with 4 GB of RAM, etc..

  Since the Developer Preview of Windows 8 came out, I've been running Windows 8 perfectly.  I completely uninstalled (each time itself) and run the following:

  Windows 8 Developer Preview, 64-bit

  Windows 8 Preview of consumer, 64-bit

  Windows 8 Preview, 64-bit version

  In any case, on this PC worked perfectly - y INCLUSIVE of the TOUCH SCREEN.  I never had a problem.

  So far so good.  Then, they finally released updates Windows 8 Pro official licensed by download.  I bought the upgrade and downloaded.  Just like in * ALL * other cases, upgrade, I chose "keep nothing" of the old system (I never really got all the important data on here), and do the upgrade itself.

  After the upgrade was complete, and ALL Windows 8 Pro updates have been applied by Windows update, I have a system where the screen is clear and precise, everything works, and all devices in Device Manager, show the Greens well, it works fine - NO ERRORS.  HOWEVER - NO CONTACT!  No touch no screen function at all.  The screen now has this time as a standard monitor.

  I tried the driver Idéacom - no luck.  Anyone know (please? LOL) how to get the touch screen to work again?  Thank you very much!  I really appreciate any help you can give.  Microsoft technical support had NO idea and no reply emails from Acer! Laughing out loud

  Thanks again,

  Mike

  [edited to conform to the guidelines]

  Hello Mike

  I sent the pilot. Please test and advise.

  Kind regards

  FReeZA

• Help, please! Aspire E5-511-P4LN takes at least 30 minutes for it to start after stop down

  Help, please!  I have an Acer Aspire E 15 (E5-511-P4LN) that I bought online at HSN last September, 2014.  I'm not really sure what happened past.  On the morning of April 10, 2015, I had downloaded the Wakfu game in my computer.  I played the game for two hours, then turned off my laptop around 14:30.  The same day in the night, about 9:30 pm, I started my laptop, but the monitor was blocked to the Acer Logo at least a half hour!  I thought that it must have the game I've downloaded so before going to bed I hibernated just my computer.  When I woke up the next day, it took my computer at least 15 minutes at the start of Hibernation!  Once he showed me the splash screen, there is no problem with the computer's performance.  in any case, I uninstalled Wakfu of my computer when I finally got in my computer.  I even downloaded CCleaner and used clean the registry.  However, today, April 12, 2015, when I started my computer, he remained on the Acer Logo for at least thirty minutes before taking me to the splash screen!  It's just too.  I don't know what else to do.

  strange question.

  the 'fastest' solution will involve a backup of your data and a reinstall of windows.

  If you don't mind not to do, turn off your laptop and turn it on by pressing ALT + F10 to launch Acer erecovery process.

  If she starts always slowly, we try to limit the question on a clean system.

• Acer Aspire R7 - 572 stuck with white screen

  My windows was stuck and I pressed the power button / stop with force. After that turned it back on it was blocked on the acer boot logo I pressed ctrl + alt + delete. It was not the passage of acer logo. Finally, he showed the automatic recovery of windows on the start screen. Since then his black screen stuck on its been nearly two hours. Nothing has worked.
  Help, please.

  Nene,

  I regret that the computer does not load Windows. I would recommend using recovery media to restore the system to factory settings. If you don't have a recovery media, this can be bought through the store.acer.com or by phone with technical support.

  If the recovery media is not available, you can always contact our technical support in your region for assistance. The question might also be related to the HARD drive and would need assistance.

• How to add an optical drive and the bezel for Acer Aspire V3-572-5217

  I think to buy the V3 Aspire 572 5217 and I would like to know the process of adding an optical drive. I did some looking and well enough to assume that the majority is universal. I would like to know if the product comes with a scope or if I have to buy a. If Yes, what measures do do so that the right settings?

  Thanks for any advice.

  Hello Brian,.

  For uphill on Aspire V3-572-5217, need you the following:

  42.ML9N2.001 - ODD BEZEL

  33.ML9N2.003 - ODD SUPPORT

  Ko.0080D.014 - DVD RW 8 X SUPER-MULTI 9,0 MM TRAY GUA0N HLDS LF + HF without BEZEL M-SATA DRIVE

  (Hitachi LG data storage)

  KO.00807.016 - DVD RW 8 X SATA M-DISC 9,0 MM TRAY SUPER MULTI DRIVE UJ8E2QBAA2-B PANASONIC

  LF + HF without the PANEL (UJ-8E2)

  You can ask for quote and order these parts in your Acer store.

• Acer aspire v 15 nitro VN7 - 591 G-74LK wifi problem low signal...

  Please help me how to fix wifi

  My laptop: Acer aspire v 15 black nitro Edition VN7 - 591 G-74LK

  During my weak signal wifi, delays in waiting, slow speeds, disassembly of connection, etc.

  Please how to fix.

  I installed patch full
  And my version of the 10.0.0.299 wireless driver

  The very low signal strength...

• Acer Aspire R7 - 572 stylus starting from 11/04/16?

  Hello

  I have an acer r7 - 572 I bought about 2 years ago. I had brought the original stylus for the laptop at the time, but currently he lost. I had to buy a new one, but this model of pen designed especially for this model is no longer registered on the site of the store or on amazon!

  I accidentally bought a 'active Stylus II' thinking that it was for this model, but it is for the other R7, not mine.

  Are there places to buy the respective pen for this notebook (or a driver to install for the II which would allow me to use it) or I'm going penless?

  Thank you very much for the help!

  It seems that the previous thread was deleted. One of the links I had was too bad.

  Here are the most valid

  http://www.CompSource.com/PN/NPSTY1A005/Acer-10/

  http://GeizHals.de/Acer-active-stylus-pen-2nd-Gen-NP-sty1a-005-a1370014.html?hloc=at&hloc=de

  http://www.microsoftstore.com/store/msusa/en_US/PDP/surface-pen/ProductID.325724000

  If you have a Microsoft Store in your area, walk and pick up a pen Surface Pro 3 or 4 Surface Pro.

  Note: No driver will make R13 pen you bought the work, as the laptop uses a completely different digitizer.

  The digitizer on your R7 is initially made by N-Trig, N-Trig has been used on many different laptops, including the Surface Pro microsft. Microsoft recently bought N-Trig, so that they are now the official manufacturer of the digitizer and pens.

• Acer Aspire E1 - 572 G Bluetooth does not work after update to 8.1 Windows

  After the upgrade to Windows 8.1 x 64 bit, my bluetooth does not detect and cannot be detected by other devices (my laptop). In Device Manager, I have NO yellow exclamation points with triangles, when I search automatically updates, windows says everything is up to date (see photo below), so everything looks very well and running. Bluetooth is on, but after research found no devices (even if the phone is also activated bluetooth). Could someone help me please? Thank you very much.

  

  Uninstall the BT adapter, right click on the Device Manager and select uninstall.

  then restart and install this drivers in support of Acer:

  http://global-download.Acer.com/GDFiles/driver/wireless%20LAN/wireless%20LAN_Atheros_10.0.0.263_W81x...

• Acer aspire e1-572 cd/dvd stopped working

  The CD/DVD drive has stopped working. When you insert a disc, normal sounds, but can here a slight ticking, then disk stops not recognized by Windows Explorer. He has worked in the past as the installed disk drivers for the new printer about 6 months ago.

  Any ideas please?

  mjmuk,

  You can contact Acer technical support in your area to see what options are available to you, which probably is to buy a new.

• Acer Aspire E1-572-6477 Fn key does not!

  I use Windows 7. When I first got this laptop the Fn key would work with other keys (for example the brightness), but does not change the volume. The place that I bought someone a fix, I have moved since then. He was worked for about three months now and all of a sudden I'm having the same problem again. I tried to go to the msconfig and looking through the commissioning, but everything is checked.

  It is a very frustrating problem for me, the sooner he corrected the better.

  -Also! I'm terrible with directions, so if you could be very clear and step by step, that would be nice.

  Hello

  The function keys are controlled by the application of launch Manager.

  Try to reinstall the launch application manager launch download Manager application