Installation of Predator G3-605 case fan

Similar Questions

• Acer Predator AG3-605 case fans?

  Hello, I saw that the predator AG3-605 does not come with box fans, but has the slots for them, I just wanted to know what size fan do I need for the side and rear of the case.

  Saniro,

  You made a good observation, but the system is designed for energy efficiency and the optimal use of the way in which it has been designed from the factory. I just found a location for a system fan and it's backward. Looks like it can accommodate 80mm or 120mm fan, but I'm not sure that these specifications are not included because it was not designed with the idea of using or needing the extra airflow.

• size of tc - 605 Acer pc case fan?

  I am trying to add the new fan in my pc acer tc 605 case, but I do not have this size fan can fits into the rear slot of your case?

  sukup6,

  According to the link below, you can measure distance between the holes to determine the size.  I think a fan 80mm or 92mm fan will work, but not quite... remember as it has been a while since I measured.

  Also, there are a couple of molex available on the harness of the ps... so it will be "always on" full speed at less than case fitted with a speed switch fan.  It isn't a sysfan of work on the motherboard to auto regulate the fan speed.  So you might want to consider a case fan which includes a 3 speed switch, if you're not running full speed all the time, even at idle.

  http://www.TomsHardware.com/answers/ID-1716550/measure-fan-size.html

  An example of a case with a three-speed switch fan:

  http://www.Amazon.com/Antec-TriCool-DBB-cooling-3-speed/DP/B00066ISF2

  I have a case in my tc - 605 fan, so take my opinion with a grain of salt.

• Nine Acer Predator G3-605 starts windows 8

  Hello.
  I got my Acer Predator G3 605 last week, but the system was slow.
  So I decided to put my SSD OCZ Agility 120 GB 2 expansion slot and instal windows drive there.
  As a first step, it starts up fine and work fast. I installed all the updates and soft, reboot several times and no problems.
  After I put everything I have delete the windows HARD disk partition. Then system stop when windows starts.

  So far, I tried this:
  1. several resettlement on the SSD and HDD image or clean install.
  2. all the BIOS for SECURE BOOT settings (on/stop/standard/custom/key on / key removed) and CSM.
  3. I connect only SSD or HDD only and do recover or new installation.
  4 delete all partitions and recover / clean installation.
  5. update of the BIOS/SSD firmware
  6 recovery discs acer does not help. Even that resetting the BIOS.

  Nothing helps. He works until the 'Configuration' window material and after the reboot that it stuck.
  No idea what can be wrong and how to fix it?
  I do not know more
  Thanks for any help.

  I finally found a solution by myself, so I'll post my solution here in case someone will have the same problem.
  It works for me, can't promise it will work for everyone.

  My step by step solution:
  1. I created WindowsToGo on my USB with this statement:
  http://www.TomsHardware.co.UK/FAQ/ID-1867613/create-Windows-drive-Windows-enterprise.html
  2. from Acer Support I have download all the latest drivers for my Acer Predator G3 605 and extract everything to a special folder on my USB key
  3. I disconnect my HDD SATA cable drive (there is still no connected SSD)
  4. in the bios I have disable startup secure, activate the start menu and CSM always turn on
  5. After restart I press F12 and the start menu, I selected my USB with WinToGo
  6. once my Windows go hardware and post installation preparation I finally see the start menu.
  7. the first thing to do was connect my HDD SATA cable so windows automatically detects the drive
  8. I open prompt by admin, type diskpart, and then list disk, my HARD drive has disk 0 so I type select disk 0, then clean type
  9. I have installed all the drivers for my Acer and restart
  10 after restarting, I go to my pre downloaded BIOS updated and open the app updated
  11 choose ROM file, choose update all (not only part of pre selected), then click FLASH
  12 reboot, unplug my USB and put it in my installation USB Windows 8 key (DVD can also be used)
  13. from Windows install go to advance the installation and choose the HARD drive (in this point installation program said that cannot be installed on this drive as bios don't have drivers, but I could still create partition, so I did two create and click Next)
  14. After all server files have been copied computer auto restart
  15 Windows 8 shows the information for the preparation of the devices (it was the last part of work for me before, cuz after computer restart blocked)
  16. after restarting Windows boot and go to the Customization screen. Everything works.

  I have to keep secure boot off and CSM on yet.

  [spelling corrected for disc]

• Precision T3500, two case fans 80mm Arctic F8 down time of 81C at 70 ° C

  Hello

  I just replaced the CPU of stock in my Precision T3500, passing from an e5520 to 5660 x.  Both processors will heat up beyond their TCase, 72 and 81.3 C respectively, values when you use the passive heatsync of Dell in copper stock.  Y at - it an active heatsync available for this system?  Heatsinc OEM installation uses downs bolt female rather than the male standard ones.

  In addition, I notice a 5 c difference between my coolest temp core and the next coolest temp core and a 8 c split between my core cooler and warmer heart.  Is this normal?

  Thanks in advance,

  SoC

  Hello Chris,

  Today, I received two 80mm Arctic F8 case fans with an adapter fan 3 pin molex.  The difference in thermal performance is deep.  I have attached four photographs, one of the fan box, one of the back of my case, one inside my case, the molex adapter, and a thermal profile up-to-date.

  With the last test after installing fans, the system seemed to stabilize round 70 C.  Although, I let only the test and monitor run for 15 minutes approximately.

  I hope that this cooling method to others.

  Thank you

  SoC

  

  

  

  

• HP 700-414: what case fan coolers and CPU would fit into a 700 HP - 414

  I installed a GTX 950 in my HP 700-414 played overwatch for maybe 3 or 4 hours max and my time cpu has reached 85 - 87 c and my gpu is between 80-85 C. So I was wondering if you guys know how I could find the size of the case fan and how many mounts for fans are available? Because I can't find anything on it I searched and searched. And do you think I could adapt a CPU cooler to spare in this case?

  Hello92, welcome to the forum.

  The time of your video card do not seem to be too bad.  The absolute maximum for the GTX 950 is 95 C.  Ideally, you do not want to keep at least 10 to 15 C lower than that which is yours according to your figures.  Your time CPU however are much too hot for me.  When OC I am very cautious and want to see time about 50 C.

  You may need to get a little inventive when it comes to add case fans.  It's always a balance.  You can actually get fans to work against the other.  In other words, a fan air may cause another do not work effectively.  Trial and error is the best way to go.  When the fans run correctly, you will see an increase in cooling.  In addition, it probably not places to mount fans.  This can be overcome by using velcro or other means.  There's not enough connectors, so you will need to use adapters.

  After walking coolers are normally very large.  You will need to measure carefully to make sure that the cooler you choose to insert in the case.  I have recommended a Cooler Master Hyper 212 EVO to a member and it was too big.  Cooler Master makes some very good, but you must find one that will fit in your case.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• adding ram to the Acer Predator AG3-605-UR1D

  I recently bought Acer Predator AG3-605-UR1D.

  I was wondering if its possible to add an another ram (MemoryStick) inside. I know how to do this, I wanted to just make sure that the pc would leave me without breaking something.

  
  

• Motherboard on Predator G3-605 and RAM

  Good afternoon - well at least for my part of the world. :-)

  I bought an Acer Predator G3-605 (new) a little over a week ago.

  I have to admit that it's such a long time ago since I have read on different data components, and I still have knowledge of black holes in particular as to the compatibility.

  I have two questions: the compatibility a rearding first and a second related to something else.

  Question 1:

  After some research, I found that the motherboard is indeed called "Predator G3 - 605'.» Well, on on the net-based stores carrying this model of Acer, the record shows that the RAM is 1600 MHz. I am yet to know (from my black holes of the knowledge of the computer) If this detailed specification showed information for specific components of RAM installed, or if this MSL tells that this megaherz / RAM type, which is the only type that can manage the card mother Predator G3 - 605?

  I ask because I want to upgrade the RAM in the machine, and I wonder if I need to stay below the megaherz listed under the plug, or if I can use other megaherz, as long as I keep DDR3 - naturally -?

  For you who have a good knowledge of computers in general, this first issue of the mine should be very easy to answer.

  Question 2:

  This issue is related to my attempt at an online chat after that I registered my Predator G3 - 605 an hour ago, I've done through the program "Acer Portal" which was already on my machine. So, immediately showed as registered successfully, but when I went on the chat, and plotted in my serial number, this info came:

  «Our records indicate that you have entered the serial number is no longer eligible to warranty support.»

  If you feel that this information is incorrect, please analyze and present a copy of your proof of purchase. »

  (I have download the documents a few moments ago.)

  I realize that this must be because I'm from Europe that I probably can't get help via a chat, but I still react on the info where my machine supposedly is not eligible for warranty support, that looks like my machine is too old for her.

  I guess also that my machine do not appear as "eligible for warranty support" even though I downloaded the documents, and I have to call my local Acer support for all kinds of questions.

  Should not rather the info automated show that the product is in warranty period, but not eligible to support from outside the country of purchase?

  Fortunately this community exists, and I know that communities like these are usually a great help!

  Especially easy question I had expected an easy game for many people. :-)

  Thanks for your time.

  http://www.Kingston.com/us/memory/search/options/

  If the finder memory does not work, you can always contact their sales dept to ensure you buy the right product.

  http://www.Kingston.com/us/company/contacts#tech

  It's always a more sure bet to buy ram with the same voltage than what you have installed, but I would probably check with Kingston.

• Re: Acer Predator G3-605-UR2F desktop computer. Are open PCIe slots v3.0?

  I recently bought a new Predator G3-605-UR2F.  While I find that the machine has two PCIe x 1, I can't find out if these locations are compatible v3.0 (or?).  I am particularly interested in installing one of the new Intel 750 Series SSD which use the PCI rather than SATA III interface to significantly increase the speed of R/W.  Thanks in advance for your answer.

  Thank you very much. According to what I read today, the machine has indeed the B85 Intel chipset, so I'll give you upward on the new Intel PCIe SSD at the moment. Thanks again for your insight!

• Gel with my Acer predator g3-605

  Hello

  First of all, I would say I'm sorry for my bad English because it is not my mother tongue.

  So here's my problem: since I bought my acer predator g3-605 I gel on it when I play games.

  I searched and found that I am not the only one having these gel but none of the solutions helped me.

  I tried a lot of solutions such as:

  • Update the drivers via Geforce experience
  • Uninstall/reinstall applications/games that freeze
  • Move the games/applications on the disk HARD or, on the contrary, to the SSD.
  • Factory (!) "restart" at the beginning

  I found a similar post of my friends on this forum, but the only solution for him was to send his pc to replace it with another computer, and I'd found a solution without changing my PC.

  With our thanks,

  I think your motherboard is faulty. I suggest you contact your Acer support.

  Sorry I can't help you more.

• Predator AG3-605-UR1D - Bay Swap Easy?

  I just bought the predator AG3-605-UR1D.  I saw that he has what they call an Easy Swap Bay in front - it has an orange button on it and I understand that you can put a hard drive in there for the extra space.  I have a hard drive and ready to go, but I'm unable to get the Bay Easy Swap out.

  I read that its as simple as pushing the orange button and pulling on it, but I can't seem to break away.  I noticed a screw on the left side of the Bay - what I should it unscrew out of the Bay?

  Any help would be great!

  I solved the problem!  The screw is indeed the reason why it was not opening of the Bay.  For all users with this chassis, you will need a torx screwdriver, unscrew.

• Case fan runs at full speed

  I accidentally shorted the circuit case fan on my motherboard HP (explanation below), and now the fan runs at full speed all the time. Apart from the fact that it was a stupid thing to do, it will be a long term problem and should I try to reset the fan speed switch?

  (Long version) It's hot here these days and my computer fans seemed underpowered. I put a splitter at the exit of the case on the motherboard fan and added a second fan in addition to the original fan. All it worked well except the new fan seems to run pretty slow. I wanted to get a voltage reading card fan, but I accidentally hit the two sensors on my voltmeter and the computer shuts down immediately. He has started up and worked well, except that the throttle was no longer working and the fans were running at full speed. This also explains why the second fan turned slowly before when they were both being strangled.

  I guess that in the end I got my wish to have my fans running at full power, I just wanted to see if there are future problems leaving this way.

  Hello design_guy,

  You should not have problems with the fan rotating at high speed, with the exception that you can reduce the life cycle of the fan.

  You can install software on the computer that will allow you to adjust the speed of the fan to the computer which may help you extend the life of the fans and give you a bit of control over them.

  Something like SpeedFan should do the trick.

• HP Pavilion HPE h8 - 1070t CTO need case fan

  HP Pavilion HPE h8 - 1070t CTO, product number: LP028AV #ABA

  After an error message, on the fan and case fan noise I replaced the AVC DS09225R12MC234 DC 12V case fan 0. 3A with a Startech.com FAN9X25TX3H case fan.

  A program to monitor I have shows an increase in rpm of the system another fan. I'm trying to find out if my new fan is correct or adequate propper case fan.

  Hi checkit, as long that all fans are working and they doesn't make unusual noises or work allways on the maximum RPM is fine, Adi.

• Dell Studio XPS 9100: Case fan care? Cooler CPU upgrade options?

  I want to upgrade the case fans in my XPS 9100, but I've seen much contradictory info in the actual specifications regarding size: are these 92 mm or 120 mm?

  In addition, it is an i7 960: is there a compatible upgrade for the CPU cooler? I don't want or need to COO liquid: want to let it cool a bit. Basic time are constantly around 52 C.

  I think that on all processors in the LGA 1366 socket, the hoses are the same.  On the 9000, I used the cooler DBX - B on 4 different processors in the LGA 1366 socket.  Any socket LGA 1366 cooler should operate, regardless of the CPU.

  The DBX - B can be installed to direct the air in 1 of the 4 directions, depending on how it is mounted.  I have mine pointing upward, to the power supply.  (Note fan blows air in the direction of the fins in aluminium).  Idea is to keep the heat away from the other components of the motherboard and direct it to two fans at the rear (one being in the power supply), which are tailpipes.

• Replacement HP Pavilion a6667c case fan

  Hello

  I would like to order a case fan of after-market for a HP Pavilion a6667c desktop replacement. We know the size of the fan and connector type? I have no physical access to the computer to check myself, but must be ordered in advance.

  Thank you

  Greg

  The reference is: 5188-3722.  You can google this number.

  It's a 92mm casefan. Care is standardized.

  Prices range from $6.50 and more.