Precision T3500, two case fans 80mm Arctic F8 down time of 81C at 70 ° C

Similar Questions

• Dell Precision T3500 doesn't work and fans of becomes strong :(

  Hello

  My Dell Precision T3500 work not at all,

  When I run it, the CPU and the GPU fan fan becomes abnormally strong

  And nothing happens on the screen

  And I have this error (3-4) on the front of my case code
  in the user manual, this represents a failure of memory
  

  but I checked all components
  RAM-power - GPU - CPU
  It's all the worknig on my other computer Dell Precision

  I need help :(!

  If the memory is good, and the processor is good, after having tested on another machine, your motherboard needs to be replaced.  Part of the problem may be the processor slot or maybe it's the memory slot (because the first location NEEDS to be filled, it does not matter if the first location is only bad or if they all failed at the same time - if one does not work, no one else can be used)... whatever it is, the only difficulty you a new motherboard.

  If you cannot start your system, you can't Flash your BIOS.

  One last thing, you might try... Remove ALL (readers, cards, extension, mouse, keyboard, etc) the system except for the processor and a barrette of memory in the first place.

  Try another "last" thing... clear BIOS/memory NVRAM.  If there are no jumpers on the motherboard, and then disconnect the system, remove the battery, hold the power button for about 10 seconds, replace the battery, plug in and turn on.

• size of tc - 605 Acer pc case fan?

  I am trying to add the new fan in my pc acer tc 605 case, but I do not have this size fan can fits into the rear slot of your case?

  sukup6,

  According to the link below, you can measure distance between the holes to determine the size.  I think a fan 80mm or 92mm fan will work, but not quite... remember as it has been a while since I measured.

  Also, there are a couple of molex available on the harness of the ps... so it will be "always on" full speed at less than case fitted with a speed switch fan.  It isn't a sysfan of work on the motherboard to auto regulate the fan speed.  So you might want to consider a case fan which includes a 3 speed switch, if you're not running full speed all the time, even at idle.

  http://www.TomsHardware.com/answers/ID-1716550/measure-fan-size.html

  An example of a case with a three-speed switch fan:

  http://www.Amazon.com/Antec-TriCool-DBB-cooling-3-speed/DP/B00066ISF2

  I have a case in my tc - 605 fan, so take my opinion with a grain of salt.

• Case fan runs at full speed

  I accidentally shorted the circuit case fan on my motherboard HP (explanation below), and now the fan runs at full speed all the time. Apart from the fact that it was a stupid thing to do, it will be a long term problem and should I try to reset the fan speed switch?

  (Long version) It's hot here these days and my computer fans seemed underpowered. I put a splitter at the exit of the case on the motherboard fan and added a second fan in addition to the original fan. All it worked well except the new fan seems to run pretty slow. I wanted to get a voltage reading card fan, but I accidentally hit the two sensors on my voltmeter and the computer shuts down immediately. He has started up and worked well, except that the throttle was no longer working and the fans were running at full speed. This also explains why the second fan turned slowly before when they were both being strangled.

  I guess that in the end I got my wish to have my fans running at full power, I just wanted to see if there are future problems leaving this way.

  Hello design_guy,

  You should not have problems with the fan rotating at high speed, with the exception that you can reduce the life cycle of the fan.

  You can install software on the computer that will allow you to adjust the speed of the fan to the computer which may help you extend the life of the fans and give you a bit of control over them.

  Something like SpeedFan should do the trick.

• Dell Studio XPS 9100: Case fan care? Cooler CPU upgrade options?

  I want to upgrade the case fans in my XPS 9100, but I've seen much contradictory info in the actual specifications regarding size: are these 92 mm or 120 mm?

  In addition, it is an i7 960: is there a compatible upgrade for the CPU cooler? I don't want or need to COO liquid: want to let it cool a bit. Basic time are constantly around 52 C.

  I think that on all processors in the LGA 1366 socket, the hoses are the same.  On the 9000, I used the cooler DBX - B on 4 different processors in the LGA 1366 socket.  Any socket LGA 1366 cooler should operate, regardless of the CPU.

  The DBX - B can be installed to direct the air in 1 of the 4 directions, depending on how it is mounted.  I have mine pointing upward, to the power supply.  (Note fan blows air in the direction of the fins in aluminium).  Idea is to keep the heat away from the other components of the motherboard and direct it to two fans at the rear (one being in the power supply), which are tailpipes.

• Precision T3500 recognizes the new HARD drive

  I have a new 4 TB Seagate hard drive that I'm tempted to install than the third HDD on my Dell Precision T3500 system. The BIOS detects the drive fine, but nothing in the operating system (Windows 7 64-bit) find it - no disk, Device Manager or Seagate diagnostic tools management.

  Seagate support said the only thing that might be, is that my fast storage Chipset driver needs to be updated. It's a little out of my depth. I tried searching for a driver updated via the Device Manager, but it says my driver is up to date, but that date is 2010. I downloaded these files:

  INTEL_RAPID-STORAGE-TECHNOLO_A07_R291721. EXE

  SATA_DRVR_WIN_R264763. EXE

  on the site of driver from Dell, but I'm not clear what to do with them.

  SATA Operation should be AHCI and INTEL RST must be 10.1 or higher.  OS must be the 64-bit version, you also need a series of Host Bus Adapter as the Rocket 600.  That's what western Digital uses to resolve these problems.  ACHI HBA is necessary.  The rocket 620 HBA is a solution.

  http://www.Amazon.com/HIGHPOINT-technologies-rocket-620-ROCKET620/DP/B003FFZD0O

  cs_setInnerHtml ('video_51111d5d-89da-4447-bb87-ba7a5b67b199', ");

  Intel RST replaces Intel Matrix Storage Manager.  HOWEVER you cannot update to your hearts content of 7-8-9-10 11-12 or 13 etc.  As newer chipsets and drivers get the older ICH5 6 7 8 9 etc. are removed from support.

  Downloadcenter.Intel.com/.../15251
  Version 9.6.0.1014 maybe the max for your motherboard

  PCI\VEN_8086 & DEV_2682 & CC_0104 = "Intel(r) ESB2 SATA RAID"
  PCI\VEN_8086 & DEV_27C3 & CC_0104 = "Intel ICH7R/DH SATA RAID.
  PCI\VEN_8086 & DEV_27C6 & CC_0104 = 'Intel(r) ICH7MDH SATA RAID Controller'
  PCI\VEN_8086 & DEV_2822 & CC_0104 = "Intel(r) ICH8R/ICH9R/ICH10R / / 5/3400 SATA RAID.
  PCI\VEN_8086 & DEV_282A & CC_0104 = "Intel(r) ICH8M-E/ICH9M-E/5 Series SATA RAID.

  The lowest that supports over 2 TB is the RST Version 10.1.0.1008

  Downloadcenter.Intel.com/.../20768

  In general INTEL RST Version 10,11,12,13 ICH8

  IMSM = earlier Version of the driver.

  IMSM is NOT EQUAL to INTEL RST

  Intel® Rapid Storage Technology (Intel® RST) version 9.6 and new records sector supports 4 k if the device supports the emulation of 512 bytes (512th). Intel® RST does not support size of 4 k of the native devices.

  What happens if I try to use an older version of the driver?

  If you try to install the operating system on a disk 512th with an older Intel® RST 9.6 version driver, the installation process could not complete.  This driver is not validated with your XPS and may not work at all. There is ZERO support for it if its does not work.  The INSTALLATION of THIS DRIVER if its does not work can lead to the loss of 100 percent of all data.  Do so at your own RISK.  Installing a version higher than taken chipset support does the same thing.  All data lost RAID restart from zero.

  https://Downloadcenter.Intel.com/download/15251/RAID-Intel-rapid-storage-technology-driver-for-Intel-Desktop-Boards

  If the operating system is installed, do not upgrade to Intel® RST 9.6 version without having to reinstall your operating system.

  As the versions date back earlier support ICH Goes Down aka unsupported.

  You can't have the following

  • Intel® PCHM SATA RAID/AHCI Controller Hub
  • Intel® PCH SATA RAID/AHCI Controller Hub
  • Intel® ICH10R / o controller hub DO SATA RAID/AHCI
  • Hub of Intel® ICH10D SATA AHCI controller
  • Intel® ICH9M-E SATA AHCI/RAID controller hub
  • Intel® ICH9M AHCI Controller Hub
  • Central Intel® 82801IR/IO controller (ICH9R / DO)-RAID and AHCI

  	Title	Date	Version (status)	Type
  	Intel® Rapid Storage Technology (Intel® RST) RAID driver Installs version 13.6.0.1002 of the RAID Intel® Rapid Storage Technology (Intel® RST) driver. OS: Windows 7 *, Windows 8 *, 8.1* Windows, Windows Server 2008 R2 *, Windows Server 2012 R2 *,... .more	10/12/2014	13.6.0.1002 (Latest version)	Drivers
  	Intel® Rapid Storage Technology (Intel® RST) RAID driver Installed the RAID Intel® Rapid Storage Technology (version 12.8.0.1016 driver). OS: Windows Server 2008 *, Windows 7 *, Windows 8 *, Windows 8.1*, Windows Server 2012 *.	08/08/2013	12.8.0.1016 (Previously released)	Drivers
  	Intel® Rapid Storage Technology (Intel® RST) RAID driver Installed the RAID Intel® Rapid Storage Technology (version 12.9.0.1001 driver). OS: Windows Server 2008 *, Windows 7 *, Windows 8 *, 8.1* Windows, Windows Server 2008 R2 *,... .more	12/12/2013	12.9.0.1001 (Previously released)	Drivers
  	Intel® Rapid Storage Technology (Intel® RST) RAID driver Installed the RAID Intel® Rapid Storage Technology (version 13.1.0.1058 driver). OS: Windows 7 *, Windows 8 *, 8.1* Windows, Windows Server 2008 R2 *, Windows Server 2012 R2 *,... .more	27/05/2014	13.1.0.1058

  
  (Previously released)Drivers

  Intel® Rapid Storage Technology (Intel® RST) RAID driver

  Installs version 13.2.4.1000 of the RAID Intel® Rapid Storage Technology (Intel® RST) driver.
  OS: Windows Server 2008 *, Windows 7 *, Windows 8 *, 8.1* Windows, Windows Server 2008 R2 *,... .more
  01/08/2014 13.2.4.1000
  (Previously released) Drivers

  Intel® Rapid Storage Technology (Intel® RST) RAID driver

  Installed the RAID Intel® Rapid Storage Technology (version 12.5.0.1066 driver).
  OS: Windows Server 2008 *, Windows 7 *, Windows 8 *, Windows Server 2008 R2 *.
  22/03/2013 12.5.0.1066
  (Previously released) Drivers

  Intel® Rapid Storage Technology (Intel® RST) RAID driver

  Installed the RAID Intel® Rapid Storage Technology (version 12.0.0.1083 driver).
  OS: Windows Server 2008 *, Windows 7 *, Windows 8 *, Windows Server 2008 R2 *.
  01/02/2013 12.0.0.1083
  (Previously released) Drivers

  Intel® Rapid Storage Technology (Intel® RST) RAID driver

  Installed the RAID Intel® Rapid Storage Technology (version 11.7.0.1013 driver).
  OS: Windows Server 2008 *, Windows 7 *, Windows 8 *, Windows Server 2008 R2 *.
  03/12/2012 11.7.0.1013
  (Previously released) Drivers

  Intel® Matrix Storage Manager

  Support for SATA RAID 5/10 on specific desktop platforms, SATA RAID 0/1, AHCI, and matrix RAID on desktop platforms and mobile specific
  OS: Windows Server 2003 *, Windows Server 2003 Enterprise x 64 Edition *, Windows Server 2003 Standard edition *, Windows Server 2003 Standard x 64 Edition *, Windows Server 2008 *,... .more
  17/07/2009 8.9.0.1023
  (Previously released)

  Features supported

  ICH7M

  ICH7R ICH7DH

  ICH7MDH

  631xESB

  
  632xESB ICH8R
  ICH8DH
  ICH8DO ICH8M ICH8M-E ICH9R
  ICH9DO ICH9M-E
  PCH - M ICH10D ICH10DO PCH Support for volume 2-256 to (data only volumes) NO. NO. NO. NO. NO. NO. NO. YES NO. NO. YES YES Expansion of capacity NO. NO. NO. NO. NO. NO. NO. NO. NO. NO. YES YES Load under Windows 7 TRIM * (mode AHCI and RAID for disks is not part of a RAID volume) YES YES YES YES YES YES YES YES YES YES

  64 bit OS is required for readers more 2 TB

  INTEL RST over the 10.1 version is required for larger than 2 TB drives

  http://knowledge.Seagate.com/articles/en_US/FAQ/218615en

  Like other types of software, the Intel RST drivers are updated to keep pace with new technologies. Intel drivers, found in versions of the retail of Windows 7 have a limit of 2.2 TB. Rather than cutting capacity to 2.2 TB, the limitation is expressed like the rest above 2.2 to. In other words, the driver causes the windows operating to see a 3 TB drive 746.52 GiB (or 800 GB).

  With OS two 32-bit, the start address of length and partition partition are stored as 32-bit quantities.
  Because the block size is 512 bytes, this means that neither the maximum size of a partition
  Neither the maximum start address (both in bytes) can be greater than 2 ^ 32 × 512 bytes, or 2 TiB

  http://msdn.Microsoft.com/en-us/Windows/hardware/gg463525.aspx

  The GUID (GPT) Partition Table has been introduced under the initiative of the Unified Extensible Firmware Interface (UEFI). The maximum size of the partition (disc) is a function of the operating system version. The original version of Windows Server 2003 and Windows XP have a limit of 2 TB per physical disk, including all partitions. For Windows Server 2003 SP1, Windows XP x 64 edition and later versions, the maximum raw score of 18 exabytes may be supported. (Windows file systems are currently limited to 256 terabytes each.)

  

  https://Downloadcenter.Intel.com/download/17131

  8.6.0.1007

  Downloadcenter.Intel.com/.../17882
  8.9.0.1023

  Intel® Matrix Storage Manager Driver
  . DeviceDesc PCI VEN_8086 & DEV_2682 & CC_0104 = "Intel(r) ESB2 SATA RAID"
  . DeviceDesc PCI VEN_8086 & DEV_27C3 & CC_0104 = "Intel ICH7R/DH SATA RAID.
  . DeviceDesc PCI VEN_8086 & DEV_27C6 & CC_0104 = "Intel(r) ICH7MDH SATA RAID"
  . DeviceDesc PCI VEN_8086 & DEV_2822 & CC_0104 = "Intel(r) ICH8R/ICH9R/ICH10R / / PCH SATA RAID.
  . DeviceDesc PCI VEN_8086 & DEV_282A & CC_0104 = "Intel(r) ICH8M-E/ICH9M-E/PCHM SATA RAID.

  Downloadcenter.Intel.com/.../15251
  Version 9.6.0.1014

  Intel® Rapid Storage Technology driver
  PCI\VEN_8086 & DEV_2682 & CC_0104 = "Intel(r) ESB2 SATA RAID"
  PCI\VEN_8086 & DEV_27C3 & CC_0104 = "Intel ICH7R/DH SATA RAID.
  PCI\VEN_8086 & DEV_27C6 & CC_0104 = "Intel(r) ICH7MDH SATA RAID"
  PCI\VEN_8086 & DEV_2822 & CC_0104 = "Intel(r) ICH8R/ICH9R/ICH10R / / 5 Series/3400 Series SATA RAID.
  PCI\VEN_8086 & DEV_282A & CC_0104 = "Intel(r) ICH8M-E/ICH9M-E/5 Series SATA RAID.

  Downloadcenter.Intel.com/.../20104
  Version 10.1.0.1008

  . DeviceDesc PCI VEN_8086 & DEV_2682 & CC_0104 = 'Intel(r) ESB2 SATA RAID Controller'
  . DeviceDesc PCI VEN_8086 & DEV_27C3 & CC_0104 = "Intel ICH7R/DH SATA RAID Controller".
  . DeviceDesc PCI VEN_8086 & DEV_27C6 & CC_0104 = 'Intel(r) ICH7MDH SATA RAID Controller'
  . DeviceDesc PCI VEN_8086 & DEV_2822 & CC_0104 = "Intel (r) Desktop/Workstation/Server Express Chipset SATA RAID Controller '.
  . DeviceDesc PCI VEN_8086 & DEV_282A & CC_0104 = 'Mobile Intel (r) Express Chipset SATA RAID Controller'

  Downloadcenter.Intel.com/Search
  10.5.0.1027

  Downloadcenter.Intel.com/.../20768

  Version 10.8.0.1003

  . DeviceDesc PCI VEN_8086 & DEV_27C3 & CC_0104 = "Intel ICH7R/DH SATA RAID Controller".
  . DeviceDesc PCI VEN_8086 & DEV_27C6 & CC_0104 = 'Intel(r) ICH7MDH SATA RAID Controller'
  . DeviceDesc PCI VEN_8086 & DEV_2822 & CC_0104 = "Intel (r) Desktop/Workstation/Server Express Chipset SATA RAID Controller '.
  . DeviceDesc PCI VEN_8086 & DEV_282A & CC_0104 = 'Mobile Intel (r) Express Chipset SATA RAID Controller'

  Downloadcenter.Intel.com/.../21854

  Version 11.2.0.1006
  . DeviceDesc PCI VEN_8086 & DEV_27C3 & CC_0104 = "Intel ICH7R/DH SATA RAID.
  . DeviceDesc PCI VEN_8086 & DEV_27C6 & CC_0104 = "Intel(r) ICH7MDH SATA RAID"
  . DeviceDesc PCI VEN_8086 & DEV_2822 & CC_0104 = "Intel (r) Desktop/Workstation/Server Express Chipset SATA RAID Controller '.
  . DeviceDesc PCI VEN_8086 & DEV_282A & CC_0104 = 'Mobile Intel (r) Express Chipset SATA RAID Controller'

  Downloadcenter.Intel.com/.../21858

  Version 11.6.0.1030
  Windows 7 (32 bit), Windows 7 (64-bit), 32-bit Windows 8, Windows 8, 64-bit

  . DeviceDesc PCI VEN_8086 & DEV_2822 & CC_0104 = "Intel (r) Desktop/Workstation/Server Express Chipset SATA RAID.
  . DeviceDesc PCI VEN_8086 & DEV_282A & CC_0104 = "Mobile Intel Express Chipset SATA RAID.

• Elite E91XX: CPU/Case fan help please

  Hello

  I got my Elite e9150t for over a year and I was very happy with it. This Christmas, I've added a video card MSI GTX460 with a cooler ventilated internally. The video card use on 150W under full power and it is not a little too hot for my taste.

  My PC is in a custom-made in the office with the construction of ventilation in. The Office currently has a USB-powered fan that pulls 17 ft3/min, and I'll add two more this week. I hope that will solve my problem, but if it is not my next step is to upgrade the case fan in the PC. It's really painful to remove the desktop PC, so I'm hoping to get some answers here.

  From what I see the fan is a 92mm unit. I don't see the brand name, what type of connector, there or CFM rating.

  Of you can look at the fan in your system to e91XX of elite and give me some info that you can find on the fan? The fan has a 3Pin or 4pin on the motherboard connector? It blows out or in the case?

  Thanks in advance,

  Chris

  Chris,

  I use the EVGA GTX 460 1 GB but not the EA model (venting).

  You must still understand how to get fresh air in the office and the hot air outside. More ventilation top and bottom will help you. You may even consider using some fans to stream manipulation.

• HP 700-414: what case fan coolers and CPU would fit into a 700 HP - 414

  I installed a GTX 950 in my HP 700-414 played overwatch for maybe 3 or 4 hours max and my time cpu has reached 85 - 87 c and my gpu is between 80-85 C. So I was wondering if you guys know how I could find the size of the case fan and how many mounts for fans are available? Because I can't find anything on it I searched and searched. And do you think I could adapt a CPU cooler to spare in this case?

  Hello92, welcome to the forum.

  The time of your video card do not seem to be too bad.  The absolute maximum for the GTX 950 is 95 C.  Ideally, you do not want to keep at least 10 to 15 C lower than that which is yours according to your figures.  Your time CPU however are much too hot for me.  When OC I am very cautious and want to see time about 50 C.

  You may need to get a little inventive when it comes to add case fans.  It's always a balance.  You can actually get fans to work against the other.  In other words, a fan air may cause another do not work effectively.  Trial and error is the best way to go.  When the fans run correctly, you will see an increase in cooling.  In addition, it probably not places to mount fans.  This can be overcome by using velcro or other means.  There's not enough connectors, so you will need to use adapters.

  After walking coolers are normally very large.  You will need to measure carefully to make sure that the cooler you choose to insert in the case.  I have recommended a Cooler Master Hyper 212 EVO to a member and it was too big.  Cooler Master makes some very good, but you must find one that will fit in your case.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• HP Pavilion HPE h8 - 1070t CTO need case fan

  HP Pavilion HPE h8 - 1070t CTO, product number: LP028AV #ABA

  After an error message, on the fan and case fan noise I replaced the AVC DS09225R12MC234 DC 12V case fan 0. 3A with a Startech.com FAN9X25TX3H case fan.

  A program to monitor I have shows an increase in rpm of the system another fan. I'm trying to find out if my new fan is correct or adequate propper case fan.

  Hi checkit, as long that all fans are working and they doesn't make unusual noises or work allways on the maximum RPM is fine, Adi.

• Dell Precision T3500 speaker internal

  Hello

  I just installed an internal speaker in my Dell Precision T3500.  How to configure a Windows 10 system use this speaker?  The internal speaker made reference to the T3500 product documentation, but I have found no documentation on how to make it work.  I guess it's a cheap business speaker, so I know that the quality is not great.  I hope just to a few basic out of it sounds.

  Thanks in advance,

  Rob

  Until you install the OEM driver, it will not work. The oem driver install the ESP AUDIO Panel that "recognizes" the speaker.  The generic Microsoft driver does not support the internal speaker of business.

  AD198X and ANALOG Soundmax AUDIO must have AUDIO ESP to detect the speaker.

  ESP AUDIO Control Panel Soundmax Applet which 'sees' the speakers and the headphones etc plugged into the audio codec or NOT.

  

  The problem is that by default, windows 7 or 8 or 8.1 10 will use a generic HD Audio driver and therefore things like the internal affairs speaker will not work and soundmax Audio ESP does not exist.

  

  The solution is to install the Dell driver and let windows update to decide if the driver needs to update whql.

  It is a common problem.   The function Audio ESP asking you what is attached to the port is not enabled in generic win7, win8, pilot win10.  You will also need to install DOTNET 4.0 and Directx June 2010

  Before installing this driver.  You must also add the feature back for legacy Live Show on Control Panel.  If you do all the right things in the right order, it will work.  Control Panel, all the elements of the Control Panel, programs and features, windows features, turning on and outside

  Then do the check boxes.  You MUST BE online when you do this, because he lament not find features and who need to download them from windows update.

  

• Dell Precision T3500 and SPDIF Port

  Hello

  I'm in the market for a new computer because my old HP died and I really like the Dell Precision T3500. I would like to put one of my old graphics card in the new Precision T3500, a Nvidia Geforce 8500 GT because it has a HDMI port on it and I want to drive my television station. However, have sound out of the HDMI on the Geforce port, you must connect an SPDIF cable on the Geforce to the SPDIF port on the motherboard. Is my question, there a SPDIF port somewhere on the motherboard in a Precision T3500? I looked but I have never seen a list of anywhere. Thank you very much for the help!

  Chris

  Hi Chris,

  Thanks for looking in the Precision T3500 computer next and we hope that you don't end up buying one!

  That said, I must not be the bearer of some bad news that this system is not equipped with an SPDIF port on the motherboard. A possible solution would be to buy a sound card has a SPDIF connection and then connect the graphics card to that. Of course, it would take one of your PCI/PCI-Express slots.

  I hope that answers your questions - if there is anything else, please let me know!

• BSOD 7B WIN 7 Precision T3500

  Hello!

  I replaced a power supply died on a Precision T3500 with WIN7 64 bit and when I tried to start again, I get the ERRORS STOP.

  0x0000007B

  0x0FFFFF880009A9928

  0XFFFFFFFFC0000034

  When I run the windows repair disk I get this:

  Signature of the problem

  01: 6.1.7600.16385

  02: 6.1.7600.16385

  03:

  04: 21200210

  05: AUTOFAILOVER

  06: 6

  07: NO ROOT CAUSE

  Ive run memorycheck and diskcheck all RAM, CPU and and drives when no errors, except that I previously registered ERROR CODE 2000 - 0146 on the startup disk and the DVD player when I ran the bootcheck

  I've temporarily removed the CMOS battery when I tried to start it earlier and I noticed that beside the system clock summer reset the RAID was not autodetect AHCI as I think it was before.

  I posted in the forum before hardware but this looks more like some driver or settings problem I thought I'd post here instead.

  Help, please!

  Hi PMB2013,

  First, regardless of the mode of controller was before this happened, make sure that it is defined in this way. If it was before RAID, set to RAID. If he were AHCI, switch to AHCI. The wrong setting will give you the same BSOD.

  To check the integrity of the hard disk, please start on your Dell drivers and Utilities disc and run the Dell diagnostics on your hard drive. If the utility disk does not start or gives you the same error, access downloads and download a recent version of the media diagnostic utility to create a bootable flash drive, then run the diagnostics from there.

• Replacement HP Pavilion a6667c case fan

  Hello

  I would like to order a case fan of after-market for a HP Pavilion a6667c desktop replacement. We know the size of the fan and connector type? I have no physical access to the computer to check myself, but must be ordered in advance.

  Thank you

  Greg

  The reference is: 5188-3722.  You can google this number.

  It's a 92mm casefan. Care is standardized.

  Prices range from $6.50 and more.

• Precision T3500 - upgrade to use Windows 10: 32 percent CPU Intel Rapid Storage (IAStorDataSvc)

  This - according to the internet - heavy CPU usage is healed by downloading the latest version from Intel.

  However, Intel warns that manufacturers may have their own version. Is there a version of Dell's IAStorDataSvc.exe for 10 windows on the Precision T3500 series?

  If so, where could find?

  Reference Dell system detect doesn't seem to work properly.

  Start by 9.6 and install as an administrator.

  Go to the top until it says the version no.

  Intel does not support the interactively ONE of these old software more on chipsets and systems of 8 years.

  New version = less support up to = none = request denied.

  The version of the IASTORE. SYS file windows 10 is 15 or more.

  Old chipsets are NOT supported in the new versions of the driver.

• What is the case fan just to get to a m9426f

  I need a case for hp m9426f fan it says it's a foxconn model PV902512Lwhere can get me a

  Thank you

  I ordered this one low Gelid Silent FN - PX09 - 20 9 92mm TC temperature controlled case fan silent 38CFM 11 ~ 23dBA