Retro-lighting/inverter LCD screen

Similar Questions

• Satellite 5100 - LCD screen no longer lights

  Hi, I hope someone will help me on this problem.

  After disassembly of the top satellite covers the lcd screen that does more, but I guess the system is working properly because I can hear windows access "jingle". I think that I reconnected it all cables (green and white connectors for the video card), but I'm not sure thin brown/white/black cable of the lcd screen. That's all

  Hi stefano88,

  Why you have disassembled the LCD?

  To be honest I n don't know cables, you want to say you also plugged the UPS FL for LCD display? This is necessary because FL inverter controls the backlight of your screen.

  Can post you a photo of the cables you want to say?

• The LCD screen no longer works and no housing or other lights are displayed since the last update.

  The LCD went blank since the last update from microsoft, probably for windows 8.

  I am running wireless through Windows 7, 64 bit.

  Everyone knows this?

  Looks like the LCD screen is out. It might be the screen, or possibly a link inside the printer.

  However, it seems that the printer is able to be used under the actions of the façade. We can print, scan, and even perform a scan-to-print copy.

  However, if you want to take advantage of the features of back cover then you will want to consider a different printer because it sounds like this is to have an electrical problem in the display. Think to call the HP Technical Support on the upgrade program to get a new unit reconditioned at a discounted rate.

• Tecra 9000 - no display on the LCD screen when you turn on

  I recently got a Tecra 9000 for cheap on eBay. I am experienced with the construction and repair of computers, but not so with laptops.

  The problem with this laptop, it's that do not display on the LCD screen when you turn on. It was just black, no backlight, nothing. I took the laptop all share, found no obvious problem. I had to turn it on and the screen lights up a few times trying to figure out the problem. Would it be a bad connection? Or something else?

  After getting it to start work, I'll try to start to put it back together and it stopped working again. I haven't not been able to reduce it to know if it's a bad connection or a card problem.

  Someone at - it suggestions? This is a problem for others here?

  As you describe the issue, I think it is somehow a bad connection or a damaged cable, because it does not work once you have disassembled the screen.
  Maybe you need to check all the cables, leading motherboard to the LCD and take a close look, maybe for a few scratches or strong curvature.

• Satellite A100 - display balack after replacing the LCD screen

  Hello

  So I'm trying to fix a LCD on a Satellite A100. The girl I am set as said she accidentally hit the screen with his hand and became black.

  When you turn on the laptop I can here windows activate, nothing is on the LCD screen. It is not the backlight, because I don't see anything on the screen at all. So I bought a replacement LCD screen and that one does not work either. Same question

  I think it is the inverter, any suggestions?

  Could be the sensor cover?

  Thank you! Kyle

  Hi Kyle,.

  Did you buy this new LCD screen to a service provider authorized? I ask this question because it would be interesting to know if it s a Toshiba valid a party or 3rd party a spare.

  Did you check the connection of the LCD cable? There may be a link to lose or the cable itself is touched.
  Theoretically, it might be the FL inverter too, but I doubt that. Otherwise, you'd see something on the screen but very dark.

• LCD screen flashes on Satellite 2450

  my laptop model is satellite 2450...
  recently, my lcd screen is now flashing...
  yesterday it worse... Keep flashing up and down very seriously...
  around a few minutes later... the screen is done... but without the backlight everything barely be seen now because of the conditions without backlight...

  Wat kind of problem, it's...?
  all I can do about it?

  If I send to repair... how much will it cost? or rather I just buy an external lcd to plug?

  Hello

  Of course there is a hardware malfunction. The best way to know what may be the problem is to contact the Service of your country partner. In my opinion, it may be some problem with FL inverter and it must be changed.

  As I said contact Service partner. You can find one under section http://eu.computers.toshiba-europe.com support & downloads.

• Gigaframe L81 - after 2-3 seconds, the LCD screen turns off

  Hello!

  I think, I missconfigurated my camera... I put the automatic light (auto light) options, then the LCD is turned off. OK, its light of day here, but how can she Cook?

  And - perhaps because of the thing said? -its LCD screen turns off every time, when I push the power on button. I'm tired of using the reset switch, but she has - at least, in the LCD - no effect.

  Device is reset, then lights up the screen, I see him starting, I can touch control "buttons" on the right side (I can see the blue lights), but after only 2-3 seconds, the LCD display turns off again.

  Although I can do anything on my camera - attach PC files, copy or dele (ordered from Windows) etc. I just don't see anything in the LCD screen.

  What's wrong?

  If it still does not work after resetting it, then it may be a hardware problem.

  I think that you will need for repair/replacement.

• Satellite L750 - scuffed or scratch the LCD screen

  It is a strange. Last night, I (foolishly) used on the back of my finger to remove dust on the screen. This could cause wear on my skin and itch of my nail brand.

  I then used a white cotton t-shirt trying to wipe (not being able to find my normal cd sheet), but it did not really work so I added a small amount of water which it (I'm guessing it wasn't a good idea to use a t-shirt anyway).

  I then used a new t-shirt that I thought that it was not a good idea to use the old. In natural light, you see nothing, but if I turn off the lights and pointing a flashlight on the screen I can see what looks likely to be:

  (a) water
  brands (b) water and SOAP (washing powder that was in the wash t-shirt)
  (c) the scratches
  or even
  (d) a very slight scratch in the surface I have tried to clean

  I tried to clean this area several times that probably made things worse.

  This area represents 1/14th of the screen and the problem is really visible when a torch fire is shone on the screen and the room is dark!, so it's not obvious in the natural light.

  The laptop is brand new, which is what makes my own mistake even more unbearable. I'm puzzled as to what the solution might be and saw cela, but think it's exaggerated bass:

  [http://www.ehow.com/how_8596338_remove-scuffs-lcd-screen.html]

  Any ideas on how to save me from a stupid mistake?

  Hi mate

  I clean my LCD (portable computer and TV) using a Microfiber cloth and special cleaning for LCDs liquid which I could buy at my computer dealer...
  That s all and in my opinion, it's good enough to clean the screens.

• White LCD screen

  I got my laptop about 18 months and now it displays only a white screen with a few darker horizontal tasks.

  This happened after letting me on, only to come back an hour later to a dead lcd screen. The laptop works fine with an external monitor.

  What is the problem with it? Being a student, I can't really afford to replace the screen!

  Hello

  It could be a fault of converter FL or other hardware malfunction. The FL inverter is not very expensive. In this case I recommend to contact the ASP Toshiba because it can do some diagnostic tests.

  Concerning

• Dust between the LCD screen?

  I noticed it last night, at first I thought it was a dead on my T400 pixel, but then I realized that the color is not changed when I did a test... Who and when I put my laptop in my bag and went home, I noticed the "dead pixel" then moved up to the other corner, then I turned a brighter light and I noticed that it's dust between my LCD screen.

  It's annoying, and I feel rather murky obsessive-compulsive right about now, what can do for 'delete', or would it be better to find a technician partner to remove it? Yes, my laptop is still under warranty.

  Hi and welcome to the forum!

  If you have the warranty, then Yes, the best option for you would be to contact the service of lenovo and be replaced by certified technician.

  It will be useful.

• First Elements 7 can be split 2 LCD screens?

  Hello

  1 first Elements 7 workspace, etc. divide between 2 LCD screens?

  2 East-GeForce GTS 250 or Quadro NVS or 1700, best or proper to PE7?

  Thank you.

  You should have no problem splitting on two monitors, LCD or CRT display. PE4, there is a limitation, and I think it was the timeline. Don't know if this limitation still exists with PE7. I've shared between 2 21 "CRT (for PrPro), but not as my calendar to be broken by the two monitors, so never use this way. Steve Grisetti can tell you if PE7 still has this limitation with the timeline panel, but you can get everything on the second monitor afer 'disconnect you' them.

  With respect to the GPU, unless you're doing more work NLE, like 3D, the Quadro will be exaggerated. I have one on my desktop and even with light 3D, it's more that I need. Good card, but I probably should have spent the extra of $ for another HARD drive (even if this machine has 6 already). Any card that is capable of double-head will work. Just be sure to check the connections and the specifications for each display. My Quadro will handle anything and everything I need were conversion adapters to drive my CRT.

  I like my nVidia, but lately, there have been problems with Adobe products and new nVidia drivers. The time that Adobe and nVidia are associated, the drivers went south to Adobe products. Go figure? ATI has received good reviews on most of Adobe for one, and their drivers seem to work very well.

  When I do NLE my computer work 17 "laptop, I travel everywhere in me, because I'm used to the double monitors on the floor.

  Good luck

  Hunt

• Satellite PRO U500 - LCD screen size is reduced

  Hi all,

  I have a Toshiba Satellite Pro U500 with one small problem, the size of the LCD screen is reduced. I have a white border to the right and down. The max resolution is 1024 x 768.
  The problem is visible also when I enter the BIOS, so I think that the problem is not Operting System drivers.
  Is there a solution to my problem? I have to send in the audience?

  Thank you for the help
  Giuseppe

  H

  It is really strange, especially if you see the same thing in the BIOS settings?
  Since when did you notice this behavior?
  Do you use pre-installed OS original you got with your laptop?

  Have you done something that may be responsible for the issue described?

  I U500 and default display resolution is 1280 X 800 t, so I understand why you have 1024 X 768 on your U500.

• 1st generation ATV dead. Orange light but no screen and no resetting of distance.  I tried direct connection to Mac and iTunes open and he's not here.  Is it possible to restore to the factory without screen or remote work

  1st generation Apple TV is dead. Orange light but no screen and no resetting of distance. I tried direct connection to Mac and iTunes open and he's not here. Is it possible to restore to the factory without screen or remote workin

  I guess you tried maintained low men together for about 6 seconds - silver 1 ATV that will restart to the diagnostic partition but who would rely on the hard disk is functional and if it was ok that wouldn't work with the logic board failure.

  I guess you have not fed and attempted to restart.

  In case your AppleTV think it is paired with another remote try Menu and left arrow for 6 seconds - the light now intervenes when you press the buttons on the remote?

  Also, it could be in the video mode bad - try Menu and upward arrow together for 6 CES switch video modes, but implies that he actually started OK.

• Re: Satellite M300 - should I replace a damaged LCD screen?

  My LCD screen is damaged and almost impossible to use. The laptop is still under warranty, but I understand screen damage are not covered. I don't know even how it happened. I'm not aware of any bump or impact to the unit.

  It is better to spend the money to replace the screen or it would be cheaper to buy a new computer? It is a spare computer that is only used if I am away from giant, holidays, at hospital etc.

  That the cost would be about, in Australian dollars?

  Thank you
  warrawillah

  Hi warrawillah,

  I think that it of difficult to tell if you need to replace the screen or buy a new computer. In my opinion it s based on the price of the new view.

  You need to contact a service provider authorized in your country. Guys can order all spare parts and if you want to replace it also.

  Good luck!!!

• LCD screen turns off without reason - Satellite M40X

  I have a problem with my laptop Satellite M40X, I work when the LCD turn off and I hear two PIF. To turn on the LCD screen I need to restart the laptop, but the problem persists after a few minutes.

  Can someone help me, please.

  Hello

  Here you can compare the version of the BIOS installed on the laptop with the one published on the page of the Toshiba driver.
  If you use the older BIOS, you can try to update. Maybe the update will sort this strange behavior.

  But there could also be a hardware malfunction if the BIOS update does not help.