Installation of Service Pack 3 and (almost) catastrophic failure.

Similar Questions

• Reader of CD-ROM/DVD-Rom disappeared after the installation of Service Pack 2

  Why my CD-ROM/dvd-rom drive does not disappear after the installation of Service Pack 2 and how do I get it back? Because before I installed Service Pack 2 I had a problem of code 10 and tried deleting the thing fixing upperfilter, but that did not work, so is there anything else I can do. I have a HP Pavilion dv9000 and it is 3 years old.

  Thank you!

  Hello

  Check with HP, their drivers support and documentation online and ask in the HP Forums about known issues.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ========

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Unable to find the personal files and desktop wallpaper is changed after the installation of Service Pack 3.

  Original title: Service pack 3.

  My computer automaticlly installed Service pack 3 and when it was over installation and rebooted I couldn't come back, it only opens to the Welcome window that I tried to do it on safe mode, afew ways and all I would get was a mess, saying file is missing or damaged windows root>\system32\hal.dll. Please reinstall a copy of the above file, then there was another mess, saying load needed DLLs for Kerrnel. My computer would not shut off either Finally I held the off button down until it finally stops, then when I started it back up he did not return, but it wasn't the same startup window. There was another image of office programs on my desk were not all the same and all my photos are nolonger may not find them as well as some of my personal files that were no longer on my desk. is could someone please tell me what happened?

  Hi smittycindy,

  What steps you have tried to solve the problem?

  one) that you are able to boot to the desktop now, try to do a system restore that will repair return the computer to the point while it was working fine.

  How to restore Windows XP to a previous state

  (b) you can then manually download & install Service pack 3 from this link and check if the problem persists.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4&displaylang=en

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista Service Pack 1 and 2 installation issues

  Hello

  I have to constantly new updates available - which is service pack 2. It takes about 2 seconds to download and says that it is installed-, but it's not. I've tried everything. My system says that I have service pack 1, but if I try to download service pack 2 on the windows site it says I need service pack 1. If I try to download service pack 1, it says that I have already.

  And every day I 'new updates' which is service pack 2.

  Can I uninstall service pack 1 and install again - and if so, how can I do?

  Thank you

  * original title - Service Pack 1 and 2, to fry my brain - need help *.

  Free unlimited installation and compatibility support is available for issues related to Windows Vista Service Packs. Availability of support chat or messaging differs depending on your location. Some questions may require more support for which it has advanced a charge: http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• The installation of Service Pack 2 for Vista failed. I tried several times. Message reads "not successful." "Element not found". I click on the 'Détails' link and it shows the following error: ERROR_NOT_FOUND (0 x 80070490).

  The installation of Service Pack 2 for Vista failed. I tried several times. Message reads "not successful." "Element not found". I click on the 'Détails' link and it shows the following error: ERROR_NOT_FOUND (0 x 80070490). I tried in several ways through the links suggested to solve the problem and nothing has worked.

  
  

  I turned to the forums and I saw that many, many people have the same problem with Vista SP2 Upgrade. Microsoft and several of its Vista customers realized that Vista has a lot of problems, but people who have need of the service. Being able to download and install the SP2 can make Vista more stable, but I get the same message mentioned above, and so I am sure are a lot of other people who are trying to get Service Pack 2 integrated into Vista.

  0 X 80070490 - ERROR_NOT_FOUND
  Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.

  The error you receive occurs if there is corruption in the manifest of component maintenance base.

  Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
  http://support.Microsoft.com/kb/931712
  "Explains the SFC / Scannow.

  A repair install is the usual solution of SFC/scannow does not work.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  NB: If you have installed SP1 for Vistahttp://support.microsoft.com/kb/948537

  Step 7 (method for Windows Vista), the * UPGRADE option is not available because SP1 has been installed.

  Uninstall SP1

  See also:

  How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
  http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

  TaurArian [MVP] 2005-2010 - Update Services

• When I reboot after installation of service pack 2, the message comes out and says that updates are not configured correctly, returning from changes

  When I reboot after installation of service pack 2 on a computer laptop with Windows Vista Home Premium 32-bit Dell XPS M1530, the message comes out and says that updates are not configured correctly, returning from changes. Do not turn off your computer. I installed update readiness tool, but it does still every time. I tried to disable the antivirus software prior to installation.

  Hello
   
   
   
  1. how you try to install Service Pack 2?
  2. are you able to boot to the desktop?

   

   
  Method:
  Step 1: If you are able to start the computer in normal mode, then try a clean boot.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135
  Please note: after troubleshooting, start the computer in normal mode.

   
  Step 2: Try to install Service Pack 2 manually.
  http://www.Microsoft.com/en-us/download/default.aspx
   
  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791
  
   
   
  If you are unable to start the computer, then you can follow this link to start the computer in safe mode.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
   
   
   

   

  If you are unable to install Service pack 2, you can consult this article.

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358

  Please note: method 2 refers about upgrade on site.  Perform a repair installation/place will not damage files and applications that are currently installed on your computer.   However, I suggest you to back up all important data on the computer before you perform the upgrade on the spot.

   

   

   

   
   
   
   

• After installation of Service Pack 1 for Vista 64 bits, Windows Security says Malware and firewalls are off.

  I recently reinstalled my copy of Vista 64 bit I hope to solve this problem that has been with me for a while.  Before I wiped and reloaded, Security Center Windows would alert me every day that my firewall protection and malware have been disabled.

  I use Kaspersky Internet Security, which is fully updated and works as it should.  I am able to activate Windows Firewall and bypass the firewall Kaspersky and that error to go away, however, I can't remove the error of malicious software.  I got all these errors directly after a restart after the installation of service pack 1.

  Under Windows Security Center it says, "Kaspersky Internet Security reports that it is turned off," under the heading for malware protection.  When I click on the button to activate under Windows Security, it goes through the steps who say do you trust this program, Yes, Yes, ok.  After choosing all the options of trust Kaspersky and activate this protection, he thinks about it a little, but always returned and said it's off.  It also has a green light saying that Windows Defender is actively protecting your computer.

  I think that my Internet Security Suite is successfully active in these areas and work I checked the menu, check that they work.  In my opinion, after installation of service pack 1 that something I have messed up in the statement that those programs are active or really uninstalled them.

  Even if I can get the only message that the Kaspersky firewall is disabled to disappear by enabling the Windows Firewall, which is not yet as I want.  I want the suite of internet security that I paid to be active and functional on the side of the Windows security features.

  I would appreciate any help with this problem by addressing why he continues to warn me that my protection malware and firewalls are disabled.  Thank you.

  Also install Windows Vista SP2 this problem could be solved, otherwise try to uninstall and reinstall Kaspersky and also, try to get the latest version of Kaspersky.

  If still the same issue please contact Kaspersky support.

• Impossible to install programs, download 1628: failed to complete the installation after the installation of service pack 3

  Impossible to install programs, download 1628: failed to complete the installation after the installation of service pack 3. What I have to do.

  Assuming you meant WinXP SP3...

  Why the SP3 was not installed for over a year?

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?  Who were these applications that run in the background when you tried to install WinXP SP3?

  A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Microsoft Windows XP Service Pack 3 and new printer?

  I bought a new printer and the installation CD says I need Windows XP service pack 3 for the printer is compatible with Windows XP.

  I know that I find the installer here: http://www.microsoft.com/en-au/download/details.aspx?id=24

  What I am concerned is the download page, it says: "this installation package is intended for it professionals and developers downloading and installing on multiple computers on a network. If you're updating a computer, please visit Windows Update at http://update.microsoft.com the"

  It is safe for me to download XP service pack 3 and install?

  Yes its safe to use the downloadable installation file.

  Steps to take before you install Windows XP Service Pack 3
  Recommend the steps to take before you install Windows XP Service Pack 3.
  Also includes troubleshooting information.
  http://support.Microsoft.com/kb/950717/en-us

  J W Stuart: http://www.pagestart.com

• I have Windows XP Professional Version 2002 Service Pack 2 and have spent the whole day (from 09:00 to 21:25) trying to upgrade to XP 2003.

  I have Windows XP Professional Version 2002 Service Pack 2 and have spent the whole day (from 09:00 to 21:25) trying to upgrade to XP 2003. I have a Microsoft Office 2003 CD and when I try to download I get a message saying "necessary install file YS561401." CAB is not found! " I've been going around in circles ALL day! Can someone please help me!  When I try to put automatic updates for my computer, I get this message: "the site has encountered a problem and cannot display the page you are trying to view. The options provided below might help you solve the problem"- none of these options helped me at all! I even tried to download "Silverlight" (as recommended) and get a message ID: 1511 - "install missing Windows, downloading Windows update components! ARRRGH!  During the day, I also received error 0 x 80244019 and error 0 x 80240036. What is going on???

  Hi Kenny_47,

  There is no XP, 2003; If you want to upgrade your XP SP2 to SP3, download it here:-http://www.microsoft.com/en-us/download/details.aspx?id=24
  I suggest to install the following updates before installing XP SP3:
  1. Windows Installer for XP from:-http://www.microsoft.com/en-us/download/details.aspx?id=8483
  2. Download and install the Windows Update Agent: http://support.microsoft.com/kb/943144/en
  You are using an original CD of Office 2003?

• Problems after downloading the Service Pack 3 and Internet Explorer 8

  Hi, I have Windows Home Version 2002 and advises him to download the Service Pack 3 and decided to download Internet Explorer 8. It wouldn't let me download IE 8 and I got a blue screen. After apparently loaded, when it restarted check disk page it came and I noticed that a lot of pages in IE have been truncated. Now Internet Explorer or Firefox will load. Only Aol 9.7 will work. The update finally began to work with SP3, and while loading, the computer turns off. I did not disable Avast because I didn't know how. Please help it is very upsetting. It seems that every time that I update something it doesn't quite work.

  because sp3 is out for quite a long time your system has been widely exceeded and can have several problems.

  If I were you I backup all my data and perform a clean installation:

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/install-Windows-XP

  http://www.WindowsXPHome.WindowsReinstall.com/sp2installxpcdoldhdd/indexfullpage.htm

  http://aumha.NET/viewtopic.php?f=62&t=44636

  Clean install XP sites

  I have used the site before aumha.

• What happens when you reinstal XP OS with the cd that takes me to service pack 2 and I'm at service pack 3

  I bought TurboTax and downloaded, but can I have downloaded previously because I was unable to install due to the previous installation.  After that 2 hours of phone support with TurboTax including screenshare, they stated that the problem lies in the registry. It was damaged and I had to reinstall my OS.

  What happens when you reinstal XP OS with the cd that takes me to service pack 2 and I'm at SP3?

  I finally found my OS reinstall CD, but it's waaaay above my comfort level... what I do now.

  Frankly, if TurboTax is causing this much trouble, I would use another company as the income tax act.

  Of course, you can reinstall Windows. It's a shame, if that's the only way to solve this problem. :-(
  For later use, it is sometimes necessary to download the installation file, physically disconnect from the Internet, set up a clean boot (using msconfig startup diagnosis), reboot and THEN install the large program (and then undo the clean boot, reboot and re-connect to the Internet).

• I have windows xp after the installation of service pack 3 I can only start in safe mode

  I have windows XP after the installation of service pack 3 I can only start in safe mode?

  Hello

  ·         You get the error message?

  ·         What happens when you try to start in normal mode?

  Method 1

  Windows XP can in every start Safe Mode by default. Even if you select the option Start Windows normally, it always starts in Mode without failure. IOW, you can't get out of safe mode.

  This happens if the switch/SafeBoot is added to the Boot.ini file. / SafeBoot parameter forces a boot in safe mode by using the specified parameters. The available parameters are:

  (a) minimal (b) network (c) safeboot: minimal (alternateshell) For more information about the boot.ini switches, see visualization and correction of the settings of the boot on x 86 systems RESOLUTION (a) click Start, run and type MSCONFIG (b) click the Boot.ini tab (c) If you have a dual-boot system, select the entry that is appropriate under the [operating systems] (d) in section downstairs, Startup Options uncheck / hisFEBOOT (e) click OK (f) restart Windows The entry/SafeBoot are removed from the Boot.ini file.

  Method 2:

  If the above method is not the cause, it seems that Service Pack 3 is not installed correctly.

  Step 1: You try to run the system restore from safe mode that will repair return the computer to the point while it was working fine.

  How to restore Windows XP to a previous state

  Step 2:

  I suggest you follow the troubleshooting steps form the article and check if it helps.

   

  How to troubleshoot an installation fails on Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950718

  Note: System requirements to install Windows XP SP3

  Reference: Learn how to install Windows XP Service Pack 3 (SP3)

  Hope the helps of information.

• While the installation of Service Pack 3 error message comes as "Bullxp is not a WIN 32 application.

  Original title: installation of Service Pack 3

  IAM using windows xp service pack 2 for Bull XP software. Now, I want service pack 3 to my Zune connection. I downloaded SP3 but that you can not install. Error message comes as Bullxp is not a WIN 32 application. So my question is. What is win32 application. ?  Will I get updated by the Download Center or else are up to so that I can go?

  Hello

  The error message "not a Win32 application invalid" is displayed on the Windows computers and can indicate a variety of problems. Win32 is part of the core of the Windows operating systems and programs installed on your computer must communicate with the kernel in order to work properly.

  Follow the steps in troubleshooting these KB articles and check if that helps:

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717

  How to troubleshoot an installation fails on Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950718

  You can also post your query to the Bullguard Forum and check:

  http://Forum.BullGuard.com/Forum/

• Toshiba satellite which is stuck in the installation of service Pack 1. I have service pack 2, can not fix with this cd, can I install service Pack 2 on it without loss of data or files?

  I have the laptop (Toshiba satellite) friend who's stuck in the installation of the service Pack 1.  I have service pack 2 and am wondering, since I can't fix with this cd, can I install service Pack 2 on it without loss of data or files?

  PC claims service pack1 cd with file asms

  When you use service pack 2 cd can not load product catalogues, it is fatal error, the Setup logs files should contain more information.

  Why not integrate Service Pack 2 and Service Pack 3 on her XP CD by following the instructions here (using another PC):

  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/1443.aspx
  Copy all data on an external hard drive, do a clean install using the XP CD updated (preferably on the BIOs)
  Then, install the drivers from the system, then Microsoft Security Essentials, Windows 7 Firewall Control (XP free Version) and Malwarebytes' AntiMalware (free or Pro) or whatever you prefer security.
  Then copy the files over.
  This will probably lead to the best performance.