Installation of the Actions for elements on a Mac

Similar Questions

• Missing or corrupt files after the installation of the SP3 for XP PRO

  Norton Anti virus history shows no deletions of these files.

  * original title - I have missing files or damaged after the installation of the SP3 for XP PRO. These are files of driver for my DVD player and Camera.Specifically [dcptp.sys] can not be consulted online *.

  And have you tried to reinstall the DVD software & camera?

  Why SP3 was installed years ago?

  Currently, the computer is fully patched to Windows Update?

  ==========================

  Device Manager and network connections may be blank after you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/953791

  Device Manager may not show all devices and network connections may not display network connections after installing Windows XP Service Pack 3
  http://support.Microsoft.com/kb/953979

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Files in a folder disappeared after the installation of the software for Word color card.

  I have files in a folder that has disappeared from my office, I think it happened after the installation, I think it happened after the installation of the software for wordcard

  OT: I keep files in a folder that has disappeared from my office, I think it happened after the installation, I think it happened after the installation of the software for wordcard color

  Hello

  The problem occurs only with files on the desktop?

  Method 1
  I suggest you try the following steps:

  a. open the Recycle Bin on the desktop.
  b. If you find the folder you need, do a right-click on the file you need and click on restore.

  Method 2
  I suggest you try looking for the missing folder.

  Find a file or folder
  http://Windows.Microsoft.com/en-us/Windows7/find-a-file-or-folder

  Method 3
  I suggest you try the steps from the following link:

  Recover lost or deleted files
  http://Windows.Microsoft.com/en-us/Windows7/recover-lost-or-deleted-files

• Hello I have a problem since my installation of the update of Yosemite on my Mac, I can't open Indesign CS6

  Hello

  Hello I have a problem since my installation of the update of Yosemite on my Mac, I can't open Indesign CS6.

  I have a problem since my installation of the update of Yosemite on my Mac, I can open more Indesign and yet I installed JavaForOSX2014-001, but it changed nothing someone could help me?

  Please do not post the same question multiple times. If someone can help, they will do it, but be patient - we are all volunteers righteous, users like you. I'll delete your other messages.

• Error "Microsoft Visual C++ runtime library has encountered an error and must terminate the program" during the installation of the patch for World of Warcraft

  Original title: runtime library

  When you install the game World of warcraft it installs ok but the problem comes when the patch is installed, when it is 99% done windows gives me an error message

  Microsoft visual c ++ runtime library then said he has encountered an error and must terminate the program, I never had this problem when I put the game on my HARD lecteur2 replaced because he was going to die on me

  My operating system is Windows Vista SP2

  Help me please if you can

  Thank you much xx

  Hi Hopson81,

  Try to install the patch by starting the computer in selective startup mode (also known as a clean boot state).

  Start your computer in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  For instructions, see How to troubleshoot a problem by performing a boot in Windows Vista or in Windows 7 .

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• problems with the installation of the driver for hp 6300 all-in-one under Windows 7

  I have not install hp 6300 all-in-one driver a10_cdb_net_full_win_130_141.exe I downloaded from the HP website.  The diagnostics said: "this application has requested the execution to terminate in an unusual way.  Please contact the team for more information application support. "Please explain what is happening.

  Thank you

  Peter

  Hi petervol,

  Download and install the following hotfix below and then run the instructions to uninstall & reinstall the printer.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-77751-1&CC=US&DLC=en&LC=en&os=4063&Product=1119598&sw_lang=

  Try using the brush included in the CD or download.

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-76831-1&CC=US&DLC=en&LC=en&os=4063&Product=1119598&sw_lang=

  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-76831-1&CC=US&DLC=en&LC=en&os=4063&Product=1119598&sw_lang=

  10. run the download to reinstall the printer

• installation of the SATA for XP 8560p

  I have a 8560 with Windows 7 installed. I want to replace the drive (same type of SATA drive) with one another and install XP Pro.

  I read the posts earlier say collect information of the Windows 7 install and I should be able to change the Bios IDE mode, install XP without using the F6 driver load and install the drivers after installing XP. I don't have a USB floppy drive so I thought I might be able to use a USB but the F6 prompt is looking for a drive A: and he doesn't so I went with the installation of the SATA drivers after installing XP.

  In WIndows 7 Device manager it says the ide ata/atapi controller's (R) Mobile Express Chipset Sata ahci controller.

  With BIOS change IDE, I was able to install XP Pro SP2.

  The drive is detected as F: drive for some reason any.

  I installed SP3 service pack. I also installed various HP drivers for networking, display etc.

  When I go into the Device Manager it shows ide ata/atapi-controller.

  6 Intel series/C200 Series Chipset Family 2 Serial ATA Storage Controller - 1 09 port

  6 Intel series/C200 Series Chipset Family 4 Serial ATA Storage Controller - 1 01 port

  It only shows the R) Mobile Express Chipset Sata ahci controller.

  If I reboot and change the SATA BIOS I get a blue screen on startup of XP to load. Can only run as IDE.

  Don't know where to go from here.

  Someone help?

  Paul_Tikkanen wrote:

  Hello:

  This is the first:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5056949&prodNameId=5056950&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=ob-104280-1

  It's this one:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5056949&prodNameId=5056950&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=ob-78959-2

  Paul

  Thank you Paul,.

  The first will be not install because, guess what, he automatically wants to install in C: (no choice) which I did not. So there is a reason to reinstall.

  Second, it worked very well.

  Thanks for your help!

  Jeff

• I have a problem with the installation of the drivers for the Belkin card.

  Hello

  I just bought a new Belikin N150 USB Wifi Adapter. I went through the installation disc and all except that tooth was installing the drivers. I tried to install the drivers, and it gave me this error. Help, please! I am also on an Administrater account

  

  ~ Matt

  Hello Matt,

  Thanks for posting your query on Microsoft Community forum.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. You are able to install other software/drivers without any problem?
  2. You have security software installed on your computer?

  Try it out below mentioned methods and check if it helps.

  Method 1

  I suggest you to disable the temporary security on the system software and check if it helps.

   

  Disable the antivirus 

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.

  Method 2

  Note:

  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  You can use the following link to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756/

  This error can occur due to permission problem in the registry for the USB controllers. I recommend that you take the permission to the registry editor USB. To do so follow the steps below.

  • Run regedit from the Start menu. Be sure to export a backup copy of the registry before continuing.
  • Browse to the location:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\ENUM\USB

  • Right click on the USB folder and select permissions...
  • In the dialog box, make sure everyone is a listed group and that the reading is checked.
  • Click the Advanced tab and make sure that include the permissions that can be inherited from the parent of this object is selected, as shown.

  

  • Go to the owner tab and be sure to replace the owner of subcontainers and objects is selected as shown.

  

  • Select Apply to apply these changes. A warning message may appear at this stage. Select OK to continue.
  • If necessary permissions for USB dialog box select , and then click OK to exit.

  Feel free to post them here if you need further assistance.

  Thank you.

• Calls for the CD with PDL_COMMON on the installation of the software for HP Officejet 4315

  I have a HP Pavilion 1540n running Windows XP SP3.  I try to install the software for a HP Officejet 4315 downloaded from HP website.  The installation was interrupted and it asks me for a CD entitled PDL_COMMON.  I don't have the CD and the software downloaded does not have such a folder or file.  Now what?

  Thank you, Bill

  Bill, I would recommend a complete uninstall of the product, programs and features, as well as the removal of all copies of the printer in the Device Manager or the printers and fax machines.

  Click START, and then click RUN. Type "%temp%" and press ENTER. This will open your temporary folder, erase all files here that it is possible - some may not be deleted, but most should be able to be.

  Then follow the link here:

  http://goo.GL/ef1Ay

  And install the printing software.

  Let me know how things are going!

• Installation of the management for the storage devices Pack

  VMware vCenter Operations Manager 5.8.3 build 2076729

  Using the version of database operations vCenter 1.0.3900

  Try to install the vmware-vcops-5.0.0-MPforStorage-1.0-1450289.pak.

  Able to accept the EULA, the interface shows then updated current for about 10 minutes.

  Presented with the following, but no mention of the current day (06/10/2014) or installation of the pak software.

  

  You logging into the custom interface and by displaying the technical support information tab / indicates the following with no mention of the icon to describe.

  

  Can anyone say on where to look and what the next steps? Thank you

  I checked to the administration portal, see the next update:

  Last post last message; No file update to install!

  

• Installation of the Actions using ZXPSignCmd

  Sorry if this is the wrong place for this question, but I don't know where else to ask.

  I've been using Davide Barranca Packaging / installers ZXP to pack my extensions for Photoshop. I now want to package a few Actions and brushes, as well as the extension, but they are not install. Here is what I tried:

  < source = ' Actions/Shade.atn of the file'

  destination = "$actions".

  file type = "ordinary".

  products = "Photoshop, Photoshop32, Photoshop64" / >

  < source = file "" brushes / My Brushes.abr ' "

  destination = "$brushes".

  file type = "ordinary".

  products = "Photoshop, Photoshop32, Photoshop64" / >

  I wonder if the 'destination' and/or 'file type' is wrong.

  Thanks in advance for your help - Sam

  Hi Sam.

  If you have all the brushes in the subfolder of brushes and actions in the Actions one, just try:

  that will copy all the content instead of reference unique files.

  Let me know if it works,

  Davide

  (sometimes, I was driven nuts car Finder showed no files actually deployed to the PS files - for example, I had open Finder but after installing the product, say, the plugin has not copied - but it currently existed: I had to open the Terminal and 'ls' to finally see)

• Installation of the Photoshot 13 elements. error message: "this is a problem when extracting the files. Check the amount of space available on your computer and the rights to write to the destination folder. I have 1.38 TB of free space and total control

  I try to install photoshop elements 13, that I bought and downloaded from Amazon. When I try to install it I get the following error message: "this is a problem when extracting the files. Check the amount of space available on your computer and the rights to write to the destination folder. I administrar 1.38 TB of free space and total control.

  Charles please do not remove the installation files in the Program Files directory.  I recommend to extract the installation to your downloads folder or your desktop files.  Once installation files are extracted, you can then run the installation program to install Photoshop elements 13.

• Need to install the file for elements 7

  Then I uninstalled Cs6 reinstall... but I should have looked for my discs first.

  You see, that I originally bought Elements 7

  7 elements updated CS4

  Updated cs4 cs6

  Now, to reinstall anything, I need the code series to 7 items

  Fortunately I have that are still a safe place,

  but I need to put the Elements 7 on my laptop slow older, and I can't find the disks!

  I have my cs4 disks and my cs6 download files, but because I "upgraded" each version I need the number series for Elements 7... I have, but I also need the disk to install it on the old laptop!

  So where can I get a hold of the 7 downloadable items?

  Miss me him too a video disc publishing companies, so I think they are in a "safe place" somewhere, but I don't know where is this "safe place", and I can't find them!

  If you follow the 7 steps, you can download a trial through one of the links on this page using a browser that accepts cookies: http://prodesigntools.com/direct-download-links-for-lightroom-3-and-photoshop-elements-8.h tml/comment-page-1 #comment-2174

  and activate it with your serial number.

  If you have a problem downloading, you don't follow all 7 steps.  as a general rule, do not carefully follow steps 1, 2 or 3 is the problem, but your browser must also allow cookies (a setting of restrictive browser) is another potential source of problems.

• Installation of the SP3 for XP now crush the latest system updates or interfere with programs like IE 8?

  In all other ways my XP system is up-to-date, with the exception of SP3. I never needed before. SP1 and SP2 have been installed at the time when they were new. Now SP3 is required to upgrade to some new programs. Installation of the SP3 at this late date crush the latest system updates or interfere with programs like IE 8? I don't want that my system is back to older parameters which are now outdated. If the system settings are changed, how do I know those who?

  No, this does not disturb.

• Installation of the EBS for the use of 5-10 years

  Hi all

  ALL EBS

  RHEL

  I understand that when we sell EBS customers, they think that they will use it for a long time in order to make the economy because this expensive product.

  But the limitation is, the server gets amortized and dated or crashed after 4 years. Then the new powerful and less expensive servers will come out, but the old BONES after these times are no longer supported.

  In this regard, we can use VMbox to host the old operating system so that we can still use the EBS for a long time like 10 years? Is that a viable solution?

  Thank you very much

  JC

  Before you try to predict how scenario would be after a few years, you understand why updates are necessary. Updates always bring the novelties that are benefits in many ways. the upgrade of the operating system or software here, in this case is Oracle Applications. Always upgrade decision would be based on the cost to keep the current system and to upgrade the system. It depends also on the support get you from island Oracle and OS suppliers of suppliers.

  From now on, I know too few customers who still know the old 11.0.3 ERP systems that are run on very old OS versions and at the same time there are customers who are always on the latest versions of OS and Oracle applications.

  You can keep your old system of time as long as you can support, you can have BONES on VM while it's the combination of supported

  concerning

  Pravin