A lot of apps is not found in the app store

Since a week or two when I search for some applications in the app store they do not appear in the search results more. If I got them until I find them under "purchases" and can the re - install. Even a few apps I have installed will not be displayed in App Store, when I search for them.

Among them are Soundcloud, Bandcamp and Spotify. Always when I type in the keyword search, I see, for example when I type Spo the first three terms of the proposed research are spotify, free spotify and spotify premium. Yet when I type one of them I get several apps but none are Spotify itself. ICloud same drive not will appear in the results of the search in the App Store, even not the Apple search word.

This is exactly the same on my iPhone.

Where did they go?

Today, there is a problem with the App Store. It was well reported this problem. Please try again later.

Since you mentioned the question for "a week or two" Alternatively, you can try to reset the App Store:

Close the App Store completely from the window of the selector app by double clicking the Home button and slide up the App Store preview pane until it disappears from the display. You may be able to pick up the tab App Store covering scribbles to the left.

Then sign out of the iTunes Store (in the settings).

Then perform a forced reboot. Hold down the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears.

Then reconnect to the iTunes Store.

Also try by going to settings > general > Restrictions > and make sure that iTunes Store, Apps install, delete the Apps and In - App purchases are all under the section allow. Try to install again.

Tags: iPad

Similar Questions

  • Object named 'record' is not found in the persistent store

    When I access portlet, I got the following error on side producer portlet:
    Could someone help what they indicate:

    Thank you
    Root cause of ServletException.
oracle.portlet.server.container.InvalidRegistrationException: oracle.portlet.server.containerimpl.ContainerObjectNotFoundException: Object named "registration" could not be found in the persistent store.
     at oracle.portlet.server.containerimpl.ConsumerRegistration.<init>(ConsumerRegistration.java:88)
     at oracle.portlet.server.containerimpl.ResourceServlet$ResourceRequestWrapper.<init>(ResourceServlet.java:138)
     at oracle.portlet.server.containerimpl.ResourceServlet.service(ResourceServlet.java:93)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:70)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.portlet.server.service.ContextFilter.doFilter(ContextFilter.java:101)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at com.bea.content.manager.servlets.ContentServletFilter.doFilter(ContentServletFilter.java:178)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:230)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3593)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2203)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2109)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1427)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
oracle.portlet.server.containerimpl.ContainerObjectNotFoundException: Object named "registration" could not be found in the persistent store.
     at oracle.portlet.server.containerimpl.persistence.ConsumerPersistentStorage.get(ConsumerPersistentStorage.java:83)
     at oracle.portlet.server.containerimpl.ConsumerRegistration.<init>(ConsumerRegistration.java:69)
     at oracle.portlet.server.containerimpl.ResourceServlet$ResourceRequestWrapper.<init>(ResourceServlet.java:138)
     at oracle.portlet.server.containerimpl.ResourceServlet.service(ResourceServlet.java:93)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:70)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.portlet.server.service.ContextFilter.doFilter(ContextFilter.java:101)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at com.bea.content.manager.servlets.ContentServletFilter.doFilter(ContentServletFilter.java:178)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:230)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3593)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2203)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2109)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1427)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

    You try to migrate a portlet in JDev 10135 FOR PS1? If so, you can try to do the following:

    -Create a consumer with portlets of the server application embedded in 10.1.3.5
    -Open jdev PS1 and import the settings of the 10.1.3.5 system directory
    -Refresh record producer
    -Run the page again

    I hope this helps.

  • Error (10,47): EntryFlowPageCO not found in the oracle.apps.ap.oie.entry class.

    Hi all

    I extended a CO named IndusFinalReviewPageCOXX and I got the following error.

    Error (10,47): EntryFlowPageCO not found in the class oracle.apps.ap.oie.entry.summary.webui.FinalReviewPageCO in the indus.oracle.apps.ap.oie.entry.summary.webui.IndusFinalReviewPageCOXX class.


    I already drag the EntryFlowPageCO class file in the path myclasses\oracle\apps\ap\oie\entry\summary\webui
    and import the file. but the error remains the same... After that, I compile the EntryFlowPageCO class file and found a CO EntryFlowPageCO imports more. I drag the class of this CO also file in the appropriate path... But still the same error.

    Please give me the solution as soon as POSSIBLE.

    Thank you
    Amit Jaitly

    Amit,

    In the standard central, you can check this controller as entryflowpageco is not under myclasses\oracle\apps\ap\oie\entry\summary\webui.

    Its under oracle/apps/ap/goose/entry/webui put the same under this directory structure.

    Kind regards
    GYAN

  • the procedure entry point is not found in the library of dynamic links SHLWAPI.dll / unregistered class?

     I found a question similar to this but need more specific assistance. As I turned on my computer, a window pops up saying "the entry point of procedure not found in the library of dynamic links SHLWAPI.dll." This message has not left since and my computer let me just open google chrome. I have not tried to install anything lately. I tried what was suggested on a similar response - the sfc / scannow command-, but when I tried, it said I had to be an administrator. This confuses me because there is only a single user account on this computer so I assumed it was the administrator. When I tried to open the control panel to check, my computer would not leave a message with a lot of random numbers and letters and 'class not registered' jumped upward and me. I'm really confused and need help!

    Hello Elle1234,

    Looks like DLL file or the missing link between the Dynamic link Library & the missing registry entry. To replace the Dll files missing please go ahead and run the scan by following the simple steps below using the System File Checker tool and check if it does the trick.

    To help resolve this problem, use the tool (SFC.exe) System File Checker to determine which file is causing the problem and then replace the file. To do this, follow these steps:

    1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator.  If you are prompted for an administrator password or a confirmation, type the password, or click allow.
    2. Type the following command and press ENTER: sfc/scannow (Yes there is a space after sfc) the sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. This analysis do take some time to complete.

    Hope this review helps you. Let us know anyway. Make it a great day!

    "In the end the love you take is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

  • "the 495 ordinal not found in the dynamic link library urlmon.dll" produces 10 times every reboot

    I am running MS Vista on my laptop. Recently when I start up I get the message "the 495 ordinal not found in the dynamic link library urlmon.dll" in a popup box and must cancel 10 times before I can move forward.

    I thought somehow it may relate to a recent update that has been accepted for Skype on my system.  So I uninstalled Skype.  Attempts to reinstall Skype have failed.  the installed app, but I cannot arrive at a login screen.  Instead of the normal Skype window, I have just the bottom of loading in a web browser.

    I found a similar one but transposed ordinal error discussed 459 in the KB and I tried following many of its steps (+ my results):

    "Method 1:

    To resolve this problem in Internet Explorer, follow these steps:

    a. Quit all programs that are running.

    b. Click Start and then click Run.

    c. type regsvr32 urlmon.dll, and then click OK.

    d. When you receive the message "DllRegisterServer in urlmon.dll succeeded," click OK.

    ('DllRegisterServer in urlmon.dll' received successful)

    If this does not resolve the issue, repeat steps 2 through 4 for each of the following files (in step 3, replace Urlmon.dll with each of the names of files below):

    ·         Shdocvw.dll (failed)

    ·         Actxprxy.dll (failed)

    ·         Oleaut32.dll (failed)

    ·         Mshtml.dll (received no response)

    ·         Browseui.dll (failed)

    ·         Shell32.dll (managed)

    Method (step 2):

    I suggest you to start in safe mode and test the question.

    Safe boot mode: http://windows.microsoft.com/en-US/windows-vista/Start-your-computer-in-safe-mode

    Method (step 3):

    I suggest you perform a SFC Scan and check if it helps.

    The tool (SFC.exe) System File Checker scans missing or system corrupted files and repairs them.

    How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows: http://support.microsoft.com/kb/929833

    (SFC Scan completed successfully)

    Side note: when I started in Mode safe I immediately received an error "Microsoft Visual C++ Runtime library"Application request time to close in an unusual way"

    DavidMCandy suggested the user a list of the URLMON. Dll on the system.  I did as well.  See the file on my Onedrive to

    http://1drv.Ms/11PQ3dm

    I hope this will help you to find me a solution to my problem.

    First of all lets run a startup repair.

    This hardware test (and other things but we want to test the equipment). To do maintenance on the database and the files used by your two frequent falls (related to how windows manages system files including Windows Update). SFC is also linked to this, so we know that certain parts are working.

    After return from the logs generated.

    Startup Repair

    If your computer has a single operating system installed, repeatedly press the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again. [Correction to start - Help and Support].

    In the Display Options Options Advanced startup, use the arrow keys to highlight repair your computerand press ENTER.

    Select the Startup Repair tool.

    Startup Repair makes a log file. See C:\Windows\System32\LogFiles\Srt\SrtTrail.txt.

    To access if Windows does not start, in the Advanced Boot Options screen, use the arrow keys to select repair your computerand press ENTER.

    Select command prompt.

    Type

    type C:\Windows\System32\LogFiles\Srt\SrtTrail.txt | more

     

    More details about the error

    To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.
     
    To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.
     
    Start an command prompt (Start - All Programs - Accessories - command prompt) and type
     
    net helpmsg 2
     
    and it will say
     
    The system cannot find the specified file.
     
    Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

    Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.

    Look for the lines saying error or failed.

    Run Microsoft Fixit

    Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

    http://support.Microsoft.com/mats/windows_update/en-us

    For the visit of the list the most comprehensive

    http://support.Microsoft.com/FixIt/en-us

    When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    del %SYSTEMROOT%\Logs\CBS\CBS.log

    Install the update

    Notepad %SYSTEMROOT%\Logs\CBS\CBS.log

    Which helps with Windows Update.

    The system update tool

    Also run the system update readiness tool

    For 32-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

    For 64-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

    Repair and defragment the database

    Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
     
    SC stop wuauserv
     
    stop bits SC
     
     
    SC stop cryptsvc

    Esentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

     
    SC start cryptsvc
     

    SC start bits
     
    SC start wuauserv
     
    Difficulty of the Service
     
     
    Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.
     
    Reset
     
    Click Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.
     
    If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.
     
    SC start DCOMLaunch
    SC start RpcSs
    start wuauserv sc config = auto
    SC start wuauserv
    departure from trustedinstaller sc config = request
    SC start trustedinstaller
    SC config COMSysApp start = demand
    SC start COMSysApp
    SC config BITS start = demand
    SC start BITS
    start slsvc sc config = auto
    SC start slsvc
    SC config start = auto EventLog
    SC start EventLog


    --

    More details about the error

    To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.
     
    To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.
     
    Start an command prompt (Start - All Programs - Accessories - command prompt) and type
     
    net helpmsg 2
     
    and it will say
     
    The system cannot find the specified file.
     
    Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

    Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.

    Look for the lines saying error or failed.

    Run Microsoft Fixit

    Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

    http://support.Microsoft.com/mats/windows_update/en-us

    For the visit of the list the most comprehensive

    http://support.Microsoft.com/FixIt/en-us

    When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    del %SYSTEMROOT%\Logs\CBS\CBS.log

    Install the update

    Notepad %SYSTEMROOT%\Logs\CBS\CBS.log

    Which helps with Windows Update.

    The system update tool

    Also run the system update readiness tool

    For 32-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

    For 64-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

    Repair and defragment the database

    Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
     
    SC stop wuauserv
     
    stop bits SC
     
     
    SC stop cryptsvc

    Esentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

     
    SC start cryptsvc
     

    SC start bits
     
    SC start wuauserv
     

    Difficulty of the Service
     
     
    Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.
     
    Reset
     
    Click Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.
     
    If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.
     
    SC start DCOMLaunch
    SC start RpcSs
    start wuauserv sc config = auto
    SC start wuauserv
    departure from trustedinstaller sc config = request
    SC start trustedinstaller
    SC config COMSysApp start = demand
    SC start COMSysApp
    SC config BITS start = demand
    SC start BITS
    start slsvc sc config = auto
    SC start slsvc
    SC config start = auto EventLog
    SC start EventLog


    --

    More details about the error

    To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.
     
    To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.
     
    Start an command prompt (Start - All Programs - Accessories - command prompt) and type
     
    net helpmsg 2
     
    and it will say
     
    The system cannot find the specified file.
     
    Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

    Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.

    Look for the lines saying error or failed.

    Run Microsoft Fixit

    Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

    http://support.Microsoft.com/mats/windows_update/en-us

    For the visit of the list the most comprehensive

    http://support.Microsoft.com/FixIt/en-us

    When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    del %SYSTEMROOT%\Logs\CBS\CBS.log

    Install the update

    Notepad %SYSTEMROOT%\Logs\CBS\CBS.log

    Which helps with Windows Update.

    The system update tool

    Also run the system update readiness tool

    For 32-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

    For 64-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

    Repair and defragment the database

    Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
     
    SC stop wuauserv
     
    stop bits SC
     
     
    SC stop cryptsvc

    Esentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

     
    SC start cryptsvc
     

    SC start bits
     
    SC start wuauserv
     

    Difficulty of the Service
     
     
    Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.
     
    Reset
     
    Click Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.
     
    If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.
     
    SC start DCOMLaunch
    SC start RpcSs
    start wuauserv sc config = auto
    SC start wuauserv
    departure from trustedinstaller sc config = request
    SC start trustedinstaller
    SC config COMSysApp start = demand
    SC start COMSysApp
    SC config BITS start = demand
    SC start BITS
    start slsvc sc config = auto
    SC start slsvc
    SC config start = auto EventLog
    SC start EventLog


    --

    More details about the error

    To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.
     
    To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.
     
    Start an command prompt (Start - All Programs - Accessories - command prompt) and type
     
    net helpmsg 2
     
    and it will say
     
    The system cannot find the specified file.
     
    Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

    Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.

    Look for the lines saying error or failed.

    Run Microsoft Fixit

    Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

    http://support.Microsoft.com/mats/windows_update/en-us

    For the visit of the list the most comprehensive

    http://support.Microsoft.com/FixIt/en-us

    When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    del %SYSTEMROOT%\Logs\CBS\CBS.log

    Install the update

    Notepad %SYSTEMROOT%\Logs\CBS\CBS.log

    Which helps with Windows Update.

    The system update tool

    Also run the system update readiness tool

    For 32-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

    For 64-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

    Repair and defragment the database

    Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
     
    SC stop wuauserv
     
    stop bits SC
     
     
    SC stop cryptsvc

    Esentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

     
    SC start cryptsvc
     

    SC start bits
     
    SC start wuauserv
     

    Difficulty of the Service
     
     
    Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.
     
    Reset
     
    Click Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.
     
    If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.
     
    SC start DCOMLaunch
    SC start RpcSs
    start wuauserv sc config = auto
    SC start wuauserv
    departure from trustedinstaller sc config = request
    SC start trustedinstaller
    SC config COMSysApp start = demand
    SC start COMSysApp
    SC config BITS start = demand
    SC start BITS
    start slsvc sc config = auto
    SC start slsvc
    SC config start = auto EventLog
    SC start EventLog


    --

  • Definition of OPS of type attribute not found in the original Version, but it's there!

    Hi all,

    I'm new with ofa and I m having a problem when I try to deploy in the dev environment. (this works well in jdevelopment but not in the dev server)

    Error page

    Details of the exception.
    oracle.apps.fnd.framework.OAException: oracle.jbo.NoDefException: Houston-25058: ResponsabilidadId definition of the attribute type is not found in the QuiebresComercialesVO1 to oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException(OAPageErrorHandler.java:1247) to oracle.apps.fnd.framework.webui.OAPageBean.renderDocument(OAPageBean.java:3247) to oracle.apps.fnd.framework.webui.OAPageBean.renderDocument(OAPageBean.java:3042) to _OA._jspService(_OA.java:228)

    I checked the VO.xml and the attribute is set as you can see in the next image 2013-07-19_0902 - mayistra library

    I would be grateful if someone can give an idea of what it can be. Is there anything else I can check?

    It's the clumsy version I'm working 2013-07-19_0905 - mayistra library

    Thank you all.

    Hi JulianE.

    Seems good. But strange. Please bounce the average level of once and set the permissions of this file to 7777

    Thank you

    Sandeep

  • error AVCFPlayerSetclientEnforcedExternalProjectionMethod is not found in the AVFoundationCF.dll dynamic link library

    I tried to update my iTunes this weekend.  Now, I can't open it I get this error: AVCFPlayerSetclientEnforcedExternalProjectionMethod is not found in the AVFoundationCF.dll dynamic link library is on a Windows 7 computer.  I tried to re - install outside of iTunes and repair.  But no luck.  Should I uninstall iTune and then re-install?  Help.

    These errors can usually be fixed by removing the offending dll, then fix the component it is programs and features Control Panel. AVFoundationCF.dll belongs to Apple Application Support and are normally in

    • C:\Program Files\Fichiers Files\Apple\Apple Application Support or
    • C:\Program Files (x 86) \Common Files\Apple\Apple Application Support

    where the name of the Program Files folder may vary depending on the region.

    For general advice, see troubleshooting problems with iTunes for Windows updates.

    The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.

    More information area has direct links with the current and recent if you have problems to download, must revert to a previous version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.

    Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.

    TT2

  • Why is not available in the US store loose Office mac app?

    Why is not available in the US store loose Office mac app? Are their outstanding issues with the app?

    You must apply to the developer. Apple reserves the right to remove an element if it does not perform to his expectations or a developer may not able to promote and sell a product around the world due to specific restrictions

  • Wacom Cintiq 13HD - "a supported Tablet not found on the system."

    You just bought a 13HD Cintiq (no touching) and installed the drivers Wacom on my Macbook Air w / OS X 10.11.4. It works as a second screen, but I can't get the pen to do anything and when I look in the preferences system under the Wacom component I see nothing except a message stating "a supported tablet was not found on the system." I have installed the latest driver and two former previous drivers and restarted several times now. Any help?

    That's what I see in the system Pref Pane:

    Have you checked the forum Wacom for possible solutions?

  • W2K & Flash install - SetDllDirectoryW is not found in the KERNEL32.dll dynamic link library.

    fully patched W2000 SP4 - try to install or update flash adobe gives "the procedure point SetDllDirectoryW entry is not found in the dynamic library KERNEL32.dll." said ths for both FF and IE versions of the flash Installer... it just started recently... at least since the beginning of 2012... mcafee or norton stuff has never been near this box... This is (vascular) limited to install or update flash...

    NOTE: had to choose ' Other/unknown' for windows option version in these forums, because some spark deletion of the option "Windows 2000":? :(

    I'll just post a link to workarounds to the case where someone else wants:

    http://forums.Adobe.com/thread/965334

    Because Windows 2000 is out of support and has had no updates Microsoft security since July 2010, I'm puzzled why people are so concerned about having a Flash Player update. The exploits are likely to be totally confused.

  • AutoCorrelate not found in the DLL

    Hello

    I get the runtime error after when I try to use the function AutoCorrelate in Labwindws 2012.

    Function AutoCorrelate: (return value is-5094 [0xffffec1a]). Function not found in the scan DLL library.

    I have included advanlys.h at the top of my function and added the LFP to advanced for my custom libraries of CVI analysis.  I am tring to use the sample code I copied and pasted from the online help documentation.   I can't locate the corresponding advanlys.dll the advanlys.h wants to make reference.

    Example code below:

    #include "advanlys.h".

    Double x [256], rxx [512];

    int n; n = 256;

    Uniform (n, x, 17);

    AutoCorrelate (x, n, ALGORITHM_CORCOR_NO_NORMALIZATION, rxx);

    Same here, but I noticed that my sharing folder is the same as my old CFS files developed with CVI 8.5.1.

    CVI shared Dir = "/ C/Program Files (x 86) /National Instruments/Shared/CVI.

    I looked more closely in this folder structure and concluded that:

    C:\Program Files (x 86) \National Instruments\Shared\Analysis

    published the nianlys.dll of CVI 8.5.1.    My new installation of 2012 has made this squash a copy later.

    Maybe it's the first of many cases where older versions with new conflict.    I regret trying to keep the old version of the CVI on this machine to support the previous facility.

    Thank you for leading me in the right direction!

    Best regards

    Phil

  • "The expected Version of the product is not found on the system" error message during the Installation of Service Pack 1

    I got the error message 'the expected version of the product was not found on the system' when I was installing Microsoft Office Professional 2003 Enterprise Edition (Microsoft Office Outlook 2003 with updated business contact to update Manager) Service Pack 1. I wonder that someone has a solution to resolve this error message. Your help is greatly appreciated.

    Jim

    You cannot install Office 2003 Service Pack 1 when overview of InfoPath 2003 Service Pack 1 is installed

    If which are not related to the situation, suggest it ask you for help by the experts of the Officeinstallation, modernization, and activating Microsoft Office products Forum.

    MowGreen Services update - consumer safety

  • Cannot install KB982331 KB981715 & KB982312 "the expected version of the product is not found on the system.

    I have the Compatibility Pack installed so that I can open .docx files of type 2007 etc.  Apparently the updates of Windows 'think' I have Office 2007 if updates following KB982331, KB981715 and KB982312 are queued to be installed, but they are unable to install it because I have not Office 2007 is installed.

    When I try to install the tool in stand-alone via the following links

    KB982331

    http://www.Microsoft.com/downloads/details.aspx?FamilyId=7f89a734-cda4-4abb-9a10-f6dfe560e8d0&displaylang=en

    KB981715

    http://support.Microsoft.com/kb/981715 and select download package now.

    KB982312

    http://www.Microsoft.com/downloads/details.aspx?FamilyId=6deb4fb0-CBFC-40DF-8F62-35fa1db0e167&displaylang=en

    I get an error correctly indicating that "the expected version of the product is not found on the system.  So they will never install successfully but Windows Update won't jump that updates are not necessary.

    Does anyone know how to remove these updates to install?

    Thank you

    Chuck

    Support of Microsoft's solution was to uninstall the Office 2007 Compatibility Pack.   I chose to ignore the updates and keep the ability to view Office 2007 extensions.

    In addition, contact the support does not count as a solution, especially when the problem is not resolved by the project "fix."

  • When I want to print my coreldraw 13 error "file of valid workspace not found in the specified path.

    whenever I try to print a document on my coreldraw is will just put "file of valid workspace not found in the specified path.

    Hello

    Thanks for posting your question in the Microsoft community forum!

    I understand that you encounter printing problems in CorelDraw. I will try to help you with this.

    (1) is the issue limited to only Corel Draw?

    I suggest you to restore the default values by pressing the F8 key while the program starts.

    Reference: File not found valid environment...

    http://CorelDRAW.com/forums/t/4156.aspx

    If the problem persists, I suggest you contact the link mentioned below for the best support.

    http://CorelDRAW.com/forums/

    Please post back if you have any questions about Windows. I will be happy to provide you with the additional options that you can use to get the problem resolved.

  • Plustek OpticBook 3600 will not install error that an error occurred during the installation of the device. The required section was not found in the INF

    Original title: Plustek OpticBook 3600 is not installed

    Found new hardware wizard runs, but after scanning stops the disc from the manufacturer with the message ' year error occurred during the installation of the device.»  The required section was not found in the INF"

    PC system is homebuild which, in theory, exceed the minimum requirements of the system of manufacturers.  Operating system is Windows XP Pro with Service Pack 3.  The scanner is connected to the USB 2.0 card that is not separately powered, but installed in the PCI slot.  I suspect that the problem lies in the PC rather than the scanner. but do not know what the problem is.  Any help would be appreciated!

    Hello
    You can try the troubleshooting provided in the link below steps to fix the problem.

    You receive a "unable to install this hardware" or "an error has occurred during installation" error message when you try to install a PCI device

    http://support.Microsoft.com/kb/841567

    Note:

    To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    How to back up and restore the registry in Windows

    http://support.Microsoft.com/kb/322756

    See also:

    Error message: cannot install hardware. An error occurred during the Installation of the device

    http://support.Microsoft.com/kb/810882

  • I have Windows XP, her border is my home page, when I click on a story, Yahoo page appears, 404 not found, sorry, the page you requested has been

    I have Windows XP, the border is my home page, when I click on a story, Yahoo page appears, 404 not found, sorry, the page you requested

    not found.   If I go to Google Chrome, it works perfectly!   I do not use Chrome because their title stories are not up-to-date.

    http://answers.Yahoo.com/question/index?QID=20080118090732AAeKoF1

    Border is powered by Yahoo, try the thread above, see if it will solve your problem.

Maybe you are looking for

  • you forgot your password

    Hello, I have set the renovation of the unit and lock Alichaelod and forgotten email data completely is possible for your help and thank you

  • Satellite Pro 6100 does not recognize the single battery external power

    Whenever I have start Satellite Pro 6100 Win XP Pro with standard battery mounted and connected to the power supply computer laptop does not recognize the ext battery supply single supply and during 'start-up' goes into hibernation. By pressing the p

  • How can I identify the photo albums are assigned to in Photos.

    When I look at a picture in the stack of Photos or any album, I would like to be able to identify the albums that he has been assigned.  Does anyone know how to do?  Please understand that I know how to use a smart album to find unassigned photos, bu

  • V5 - 573G noisy right blower

    Hi all I bought a laptop Acer V5 - 573G 10 days ago and since buying the right of cooling fan is a constant hum/subtle grinding noise. The noise is not too loud, however, it is much louder than the fan on the left. I was hoping that the noise would l

  • How to disable the vibration

    Hi all I want to ask questions about how to disable the vibration. I manually disable in Whatsapp and Message but still - it vibrates. someone knows how to fix this?