Installation of the Bluetooth adapter problem

Similar Questions

• How to install the bluetooth adapter to 4.0 on my HP Pavilion p6-2304eb trust

  I tried several times to install, but after installation, PC (windows 8.1) does not recognize my card?

  message: plug the adapter

  The bluetooth adapter is a TRUST 4.0 with productnumber 18187 bluetooth adapter.

  plugged in USB 3.0.

  Trust did not provide a driver for Windows 8.1, so the issue is not with your PC or operating system. Tyr plug it into a usb 2.0 port. USB 3.0 ports are picky about the devices.

  The problem is that the bluetooth dongle has no support for Windows 8.1.  Trusted contact .

  Sorry to bear bad news. I go back the dongle and find one that suports Windows 8.1.

• USB Bluetooth adapter problems

  Hello

  I recently got a new Toshiba Tecra S1 (PM725) and an adapter Bluetooth usb (with More4you software).

  But I can't make it work with my nokia 6310i

  I installed new battery BT (Bluetooth Stack for Windows by Toshiba (3.10.00).

  Analysis of my nokia BT Manager, but when I want to connect to it, it immediately disconnects (after that I supported on accept connection on my nokia pairing) and the BT Manager gives the error: a not to connect to the following service: Dial-up networking. Connection request failed.

  I only installed the BT stack (from dir... BT package /US/) because when I run the installer from the main dir, it does not recognize my BT adapter. He keeps asking to put the int bt adapter.

  I had once it works, but with the next time you start it failed once again.

  Could you please help me?

  Hello

  Therefore, it is very difficult to say what the problem is. In my opinion, it is very important that
  -Adapter USB Bluetooth is installed correctly and working properly
  -Nokia must be added and installed as a new modem
  (The Nokia modem driver must be installed)

  It is not easy to help you because More4you and all settings and options there are unknown for me.

  I think before you start doing anything check there at - it problems with the USB adapter. Next step is the installation of the Nokia modem driver. I'm sure you have some CD or you can download it from the manufacturer's website.

  Please be careful with COM ports (you can use the standard port). In my case the standard port was COM 40. The same port, you must choose to install the modem driver.

  Try again. I'm sure that there is a problem with the settings. Check all out them again.

  If you discover that a problem was it please write again.

  Good luck

• HP 15 laptop: the bluetooth driver problem

  I have a HP 15 Notebook PC with operating system windows enterprise 8.1 N.

  my bluetooth driver does not work, it is very difficult to install the driver and activate bluetooth.

  my product number is J8B79PA #ACJ.

  can you please send me the link to install the bluetooth driver...

  Hello:

  According to the list of parts for your laptop, it has a Ralink RT3290LE 802.11bgn 1 x 1 Wi - Fi and Bluetooth 4.0 adapter combination WLAN.

  It would be the bluetooth driver you need for this model of the wireless card.

  This package contains the installation package driver for Bluetooth Mediatek (Ralink) in the laptop models running a supported operating system.

  File name: sp69545.exe

• Pavilion dv6 6154tx: installation of the Bluetooth driver

  Tried to install the ralink bluetooth driver software but a message like

  "Bluetooth hardware must be enabled to run this installation package.

  Please help me to install.

  Model: pavilion dv6 6154 tx

  OS: windows 7 Home premium (64-bit)

  Hello:

  Yes, that should be the correct driver to install bluetooth.

  This package contains the installation package driver for Ralink/Motorola Bluetooth and high-speed (HS) adapter in the notebook models that are running an operating system supported.

  File name: sp55063.exe

  Did you install the HP connection manager and try to turn on the bluetooth device using the software?

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=3688870&swItemId=ob_112799_2&swEnvOid=4058

• WiFi radio adapter off, the USB ports does not and the Bluetooth adapter is no longer visible... Please help!

  I had my laptop Dell Vostro repaired under insurance in January 2013 after a spill of liquid.  HAAC Ltd. has replaced most of the laptop - but the return, the SD card did not work.  This seems to be due to the engineer he connects not properly and the company recommended it and returned it to me again.  A couple of months, I found my USB was temperamental - so is my built in Bluetooth adapter.   Last month - the wifi does not work for most of the time either so I have to connect to my router by wire.

  This could be a problem in windows 7 - all my problems seem to be related to network adapters.  If it's a hardware problem - does anyone know if it could be another loose connection?  HAAC Ltd. only give a 3 month warranty on parts that seems just a little.  But if this anomaly is due to the production of poor quality - that is not properly connect the laptop then I'll go back their again if they are responsible.

  By the way – there's a switch wifi on the front of the laptop - but is not currently be recognized.

  If anyone has settings that I could check that can help - especially if some inhibit the use of wifi.

  Thank you very much

  Hello

  Your wifi switch not recognized is probably a hardware problem. The rest could be a hardware or software problem.

  Method 1:

  Lets start by doing a reset to coercive. Follow these steps:

  1. Unplug the notebook (remove power cord), then remove the battery.
  2. Disconnect all USB devices and the connections between the USB ports.
  3. Let the laptop only for several minutes.
  4. Then plug the power cord without connecting the USB devices. Then replace the battery.
  5. Plug each device in turn, allowing them to load the drivers of devices one at a time (plug in the appliance and wait its loading all its drivers before installing the next USB).

  The computer recognizes the USB ports? All of them or none of them?

  Method 2:

  Open Control Panel, Manager of design. Click the view tab, and then click Show all devices. From there, you can remove all instances of USB devices and restart the computer to see if the problem resolves. Repeat this procedure with the wireless adapter (uninstall and reinstall, ensuring that there is only one instance of the wireless adapter).

  Method 3:

  Create a new user account by following the instructions in this article:   http://windows.microsoft.com/en-US/Windows7/Create-a-user-account . Does this solve the problem?  If the problem is resolved in a new user account, this means that the old user profile is damaged. Here is the link to repair a damaged user account: http://windows.microsoft.com/en-us/windows7/Fix-a-corrupted-user-profile.

  Try these methods and post your results here. I'll be here waiting for the results!

  Kind regards

  BearPup

• installation of the Bluetooth driver for windows 8

  I m using asus x45c. in my device manager it is a yellow exclamatory sign in front of the bluetooth icon. Troubleshooting I have problem with my bluetooth driver and I m not get a updated driver for my "bluetooth usb adapter Alps". The site of asus but when I tried to install it, I downloaded 1 they r saying "no bluetooth device run that the device is plugged".i m not sure if the software is compatible with my device.it will be very helpful if you can provide me with a link to a driver that is compatible with my device. or tell me how to solve the problem with bluetooth.

  Hi Fred,.

  We would like to know the following details to help you come.

  What is the bit Version of the Windows 8 operating system that is installed on your computer?

  Click on the link below and download Bluetooth driver for your laptop. If your computer is running a 64-bit version of Windows 8, then download the driver from this link on the other you can download the driver for Windows 7 and install it in compatibility mode.

  Support for laptop X45C

  http://support.ASUS.com/download.aspx?SLanguage=en&m=X45C&OS=8

  You can follow the steps in the link given below to install the driver in compatibility mode.

  Make the programs more compatible with this version of Windows

                                          

  http://Windows.Microsoft.com/en-in/Windows-8/older-programs-compatible-version-Windows

  You can also try to contact the Support Team technical Asus on the link below.

  Technical question

  http://VIP.ASUS.com/VIP2/services/TechQuery?lang=en-us

  Do not hesitate to write us if you're still having problems. We will be happy to help you come.

• System cannot find the file specified during the installation of the Bluetooth drivers

  Hello, I have HP Envy DV6 and suddenly my bluetooth work collapsed. The on-off switch under wireless settings is inactive (64 bit of windows 8). IAM able to see the bluetooth controller in Device Manager with! Select this option. When I update its driver or try to install the drivers it says system cannot find the specified file. also I tried installation correct latest drivers of my laptop from the HP site is no help. Thank you

  

  Thank you.

  Do not use the sp59632 or sp61795. They all have two software driver for Windows XP and Win7. Maybe that's why you got the error message. I extracted the softpaqs and took a look to see what was inside.

  

  It is for the wrong operating system

  

  It is also for the wrong OS

  

  sp58515 should work.

  

  Since your laptop came with Windows 8, why not use the Recovery Manager to reinstall the driver?

  I recommend this as the best method to use. It is a one stop shop and denies the need to search for drivers online. Your recovery manager will be the drivers for hardware that is installed in your laptop.

  Invoke the charm to search for and type Recovery Manager. Click the Recovery Manager. You should see a window similar to the following image. Now, click on drivers and reinstall the Applications.

  

  

• connect the bluetooth adapter

  I try to install Targus USB Bluetooth Adapter and will have questions. Defrost not recognized. I have xp pro sp3. Istalled Bluetooth enumerator BUS and updated driver. I installed the software and driver from Targus and it is not recognized when I click on broadcom bluetooth usb. a single icon in the status bar and turns blue white when click Broadcom but red when you click Bluetooth Bus Enumerator. Can not find the device?

  Help please

  http://www.Targus.com/us/downloads/ACB20_UG.PDF hope this helps, Gerry Cornell

• Impossible to find after installation of the bluetooth driver

  I have inspiron laptop n5050 with installed windows8 and I updated all drivers support and bluetooth, I have installed DELL WLAN AND BLUETOOTH CUSTOMER ver9 after call to customer support. but I can't find bluetooth in my computer and have no wireless bluetooth option in my pc settings.plz help...

  Hi viveksan3,

  After the screenshot of the device manager that you have posted, it seems that your system was shipped with Dell 1502 wireless 802.11b/g/n wireless card. It is a stand-alone wireless card and is not compatible Bluetooth. Please let us know if you were able to connect to Bluetooth devices before upgrading to Windows 8.  In addition, please share if you were using any external Bluetooth adapter/dongle to connect.

  Please respond with the information. I'd be happy to help.

• problem with the installation of the wireless adapter

  I have a desktop running Windows 7. I'm trying to install a wireless USB adapter so I can connect to the router in my house. The functions of router properly and there is another computer at home. When I run the startup disk, everything seems fine until it says to plug in the adapter. When I plug in the adapter I get an error message that says: "the system administrator has set policies the will does not have this facility."

  I am logged on as administrator and I ran the program as an administrator.  I disabled my antivirus software.
  What "political" are this message referring to and how to change allow them this installation?
  Thanks for any help.

  See if the following thread provides a solution;

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/error-the-system-administrator-has-set-policies-to/b5350e90-fe4b-4544-8549-20c6a7befb51

• 4 - 1035tx ultrabook envy: unable to connect to the internet (adapter problem)

  I tried to troubleshoot it, it shows me the following.

  

  Go to Device Manager, gave me the following.

  

  The main issue here is that, I would need cable/WiFi to download drivers, but it is not recognizing it. (Adapter that needs to be downloaded, but I can't, because I can't access the internet in the first place.)

  Here is the data.

  Standard VGA graphics card

  PCI\VEN_1002 & DEV_6840 & SUBSYS_1895103C & REV_00

  PCI\VEN_1002 & DEV_6840 & SUBSYS_1895103C

  PCI\VEN_1002 & DEV_6840 & CC_030000

  PCI\VEN_1002 & DEV_6840 & CC_0300

  Ethernet controller

  PCI\VEN_10EC & DEV_8168 & SUBSYS_1895103C & REV_0A

  PCI\VEN_10EC & DEV_8168 & SUBSYS_1895103C

  PCI\VEN_10EC & DEV_8168 & CC_020000

  PCI\VEN_10EC & DEV_8168 & CC_0200

  Intel (r) 7 series/C216 Chipset Family USB 3.0 eXtensible Host Controller Installation disk - 1E31

  PCI\VEN_8086 & DEV_1E31 & SUBSYS_1895103C & REV_04

  PCI\VEN_8086 & DEV_1E31 & SUBSYS_1895103C

  PCI\VEN_8086 & DEV_1E31 & CC_0C0330

  PCI\VEN_8086 & DEV_1E31 & CC_0C03

  Network controller

  PCI\VEN_14E4 & DEV_4727 & SUBSYS_1795103C & REV_01

  PCI\VEN_14E4 & DEV_4727 & SUBSYS_1795103C

  PCI\VEN_14E4 & DEV_4727 & CC_028000

  PCI\VEN_14E4 & DEV_4727 & CC_0280

  PCI device

  PCI\VEN_10EC & DEV_5289 & SUBSYS_1895103C & REV_01

  PCI\VEN_10EC & DEV_5289 & SUBSYS_1895103C

  PCI\VEN_10EC & DEV_5289 & CC_FF0000

  PCI\VEN_10EC & DEV_5289 & CC_FF00

  PCI Simple Communications controller

  PCI\VEN_8086 & DEV_1E3A & SUBSYS_1895103C & REV_04

  PCI\VEN_8086 & DEV_1E3A & SUBSYS_1895103C

  PCI\VEN_8086 & DEV_1E3A & CC_078000

  PCI\VEN_8086 & DEV_1E3A & CC_0780

  Unknown device

  ACP\HPQ0004

  * HPQ0004

  Hi @sai1234,

  Welcome to the HP Forums! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  Thank you for posting. I read your post, and I understand that you need to install the wireless network card drivers and the network card. I wanted to help.

  Please download from http://support.hp.com/us-en/drivers/selfservice/HP-ENVY-Ultrabook-4-1000/5269312/model/5272688 on a USB key. Then copy these drivers of the USB to your CRAVING Ultrabook 4-1035tx hard driver for installation.

  Let me know how it goes.

  To say thank you, click on the "thumbs-up". Accept the post as a solution, if your problem solved, so that other people have the same problem can see it.

  Kind regards

• Help with the installation of the network adapter driver

  I recently did a clean my PC installation because I forgot my password and had just finished up all configuration for my PC. Once I had finished setting up my new user, I tried to connect to internet but was confronted with an error that says I had to install a driver for my network card. Anyone know where I can install one, or how I can fix this problem?

  Hello

  You get the NIC, drivers etc. from your computer or computer laptop manufacturer > downloads/drivers Support Section > computer your model number and operating system > finding drivers.

  Use the computer that you are to arrive here to download and save the drivers > copy of Flash Drive > transfer to another computer.

  See you soon.

• Installation on the second computer problem

  Hi, I have a problem installing and hope to find help. Please excuse my bad English, I'm from the Germany.

  I run Adobe full CC as a freelancer one OBA my iMac in the second year now.

  Last week, I bought a used MacPro and wanted to install it on the Mac too, as a second installation.

  I downloaded the installer of creative cloud, logged and downloaded/installed programs.

  When I want to start a program I have only two choices. First, to start the test (what is the test 30 days?). Then to activate it with a serial number.

  I don't remember entered a serial number when I activated my original copy on the iMac first... or I should have one...? !!

  Help, please.

  If you went well all the steps, contact the adobe support, https://helpx.adobe.com/contact.html

• Installation of the USB Modem problem

  I am trying to install a Telstra 4 G mobile USB modem on a Dell Ultrabook on Windows 7, keep this message ' VB Script run time for custom action ' won't complete installation

  Update your Windows and install the latest update.

  Visit the website of support if your modem and install the latest version of the driver.

  Contact the manufacturer support and discuss this matter with them.