problem with the installation of the wireless adapter

Similar Questions

• 4320 proBook s - problems with the wireless Assistant

  Hello

  I have my ProBook s 4320 for about half a year now. For most of the year the half I had problems with the wireless assistant - it seems that when I start my laptop it takes about 5 to 10 minutes before the work of the internet. I never changed any settings in the wireless assistant.

  Nobody does face these same questions and no one knows how the internet starts immediately when I start my laptop? I tried this on different places with different wireless modems, but everywhere, it's the same thing and books of other people can use internet immediately.

  Thanks in advance

  Hello

  You are welcome to help

  The fact that it connects properly in Mode safe indicates that the driver who normally starts with Windows or a program is causing the problem - most likely candidate is to begin by F-Secure.

  Before attempting the following procedure, make sure that you have an installation of F-Secure program, so you can re - install this software, and also a license key necessary to activate it.

  Then, from the windows control panel. Open programs and features, click on the entry for F-Secure once to highlight, and then click the option to uninstall at the top of the window.  Once done, restart the laptop.

  Again, when windows restarts, check the internet connection by using only a known secure site.

  Let me know how this affects the problem.

  Kind regards

  DP - K

• Problem with the wireless on the system tray icon.

  Original title: wireless

  not found wirreless icon in the taskbar

  Hi Amourhbone,

  Thanks for posting your question in the Microsoft Community forum.

  It seems that you have a problem with the icon on the system tray wireless.

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.
  Provide us with a few details in order to better understand the issue.

  1. which version of the operating system are you using?

  2. deal with any problem with the wireless network using Internet?

  3. do you receive any error messages?

  4. did you of recent changes on the computer before this problem?

  I suggest you try the procedure described in the article and see if it helps.

  System icons do not appear in the notification area in Windows Vista or Windows 7, you must restart the computer
  http://support.Microsoft.com/kb/945011

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• I started having problems with the wireless mouse and the carpet of my laptop - Lenovo ThinkPad T420 mouse.

  Original title: right click on the mouse itself activating

  I borrowed a USB to a person at work and I started having problems with the wireless mouse and the carpet of my laptop - Lenovo ThinkPad T420 mouse. The left click of two devices works normally, however, sometimes she does not respond to clicks and it takes a few seconds to work. The left button was constantly starts to turn on, as if he was stuck. After that I hit Alt + Tab and modify windows it stops for a few moments and starts at a later date. I havo not found a specific condition or a combination of keys that may trigger the fault.

  I read a few posts on discussion forums, but all say that it could be a hardware problem, which I think is not, because both devices have the same problem and I'm sure it all started with the insertion of the borrowed memory stick. I scanned the readers to help Symantec's EndPoint Protection and installed Microsoft Security Essentials and performed a full scan, but found nothing. I even restored the system, but the problem remains.

  Should I get a different antivirus? How can I find the cause so I can find a better targeted solution?

  Try to install the drivers from this link and check.

  http://support.Lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=MIGR-77167

• Satellite A200 - problems with the AC adapter / CC

  Hello

  The problem concerns a Satellite A200 (PSAF6A-02H01N).

  Recently, there was problems with the laptop, taking several attempts to boot to Vista, it would lock up while loading or just hang and freeze just after loading Vista.
  But once it was up and the laptop running would be happy working for hours with the AC adapter is plugged in.

  The problem got worse now and the laptop will not load Vista end without crashing.
  We have now reduced the computer down to have only a problem when the power adapter is connected.
  The laptop battery will charge normally with the AC adapter is plugged in and the laptop on standby or off.

  The problem persists with the AC adapter is plugged in and the battery removed.
  The laptop will start and run perfectly with battery and no power adapter plugged. Once the AC adapter is plugged in the laptop indicates that the battery is charging and then after a few seconds it crash or freeze and the only escape is a full stop.
  The laptop will not work under the battery power for 30 minutes max.
  I checked the output voltage of the AC adapter and this seems to be a consistent 19.4 Volts.

  Is this only a problem of AC adapter or the problem with the laptop?

  Thanks in advance...

  The Canada Gazette

  I lifted the previous discussions on this problem and found one that was very similar, but unfortunately the user decided not to find the problem of the road, save money and buy a new laptop instead! Hmm. !! .. seems to me like this might be a prob. material. Maybe a new motherboard?... anyone have an idea of what are the costs for that perhaps? .. an ASP or decent technician backstreet?...

• OfficeJet Pro 8500 a - problem with the wireless radio

  First of all, I'm sorry for my bad English. I hope that you have little imagination when reading. I'll start to describe the problem and the lower list, I hope, all the relevant information you need to help me.

  Yesterday, I bought a brand new OfficeJet Pro 8500 has.

  Since I have found a little bit of my computer and my router I configure for wireless connection.

  All whent fine, the printer connected to my WIFI network without any problem and I was able to do a scan using the HP scanning software. How ever, when you try to scan a document nother directly after the first that did not work. I got an error message on the computer telling me that the computer could not connect to the scanner and it could be caused by the firewall. I also tried to print a word document, but it seemed that the document could not be sent to the printer during the observation of the State of the printer. Finally I gave up the print job and began to study the problem.

  By using the service to help in the HP software that I did all the things he suggested me to do. I have disabled the firewall, open TCP/UDP ports, restarted the router, the computer and the printer in different combinations, nothing worked.

  All the while the printer was connected to my WLAN, indicated by the State of the network printer and the router. I was about to give up but thought I should try only to disable and enable the transceiver wireless in the printer. To my surprise this solves the problem. I was in a position of scan and print documents.

  Today, after work, I tried to do another analysis, and the same mistake was present. Once more I did magic with the wireless radio and it has temporarily solved the problem, but he came back a few minutes later.

  Summoriz, the error can always be corrected by disable and enable the radio wireless, but after some time (a few minutes) the error returns that it self.

  I played a bit and discovered that it is possible to access the built-in Web server during the error. Not all functionality of the EWS seems to work perhaps (it's OK) but I can't among many things has see the State of the network and I can even do an analysis using the integrated Web server.

  I tried to reconfigure the printer using the printer setup wireless and also after a reset of the printer and it does not help.

  I hope someone on this forum knows a solution to my problem.

  Useful information:

  Computer OS: Windows 7

  Router: Thomson TG784 (I have an internet connection, phone and TV provider and this box takes care of this)

  Encryption: WPA - PSK

  WLAN: 802. 11 b / g

  No filtering MAC or SSID hidden

  Other devices on the network are two mobile phones and a Motorola Xoom Tablet

  Printers, IP address: 192.168.1.81

  Firewall: WIndows (the router is disabled)

  Concerning

  Thord

  Problem solved. Reinstalled the PC s/w has little time and finally he solved the problem.

• Problems with WiFi. Problems with the Wifi adapter driver.

  Hello

  I have a Dell Inspiron 3520 with original 8 Windows installed on it. Wireless settings worked fine until yesterday but anyway its no longer works. I don't see any WiFi option and no wireless networks are also getting detected. Although his active on the network and sharing Center.

  The details of the pilot are:

  Dell 1703 802.11b/g/n (2,4 GHz) Wireless

  The internet LAN connections are working properly. When I received a diagnosis of the wireless connection, he said that there could be a problem with the driver for the WiFi card. I also tried the system restore, but the problem persists.

  How can I sort this problem?

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (also works on Windows 8)

• I have a problem with the wireless network card.

  Hello

  I use a laptop Medion MIM 2210 and I have a problem with my wireless network adapter.

  I get a message before Windows 7 starts telling me that there is problem with a wireless driver. The exact message says:

  "Intel UNDI, PXE - Z.0 (build 082)

  Copyright (C) 1997,1998,1999 Intel Corporation

  VIA Rhine II Fast Ethernet Adapter v2.43 (2005/12/15)

  PXE - E61: Media test failure, check cable of

  "PXE - MOF: exit Inel PXE ROM.

  This message appears every time you start and I don't know what he means by "Media Test Failure".

  I turned on my laptop today and noticed I had no internet connection, it showed that it connected but with yellow '!' symbol indicating that it was not fully connected. He did this for a while now and I have reinstalled Windows, in safe mode and I tried to delete the drivers and re - install, but it hangs right on uninstall what makes me angry no the case.

  Of course now, I tried to look for help my internet connection is running but the message is still there. Can someone tell me what to do or how to solve this problem, I am standing now on what to do. I was also on the drivers Medion website but it is impossible to navigate around and drivers without end there'e to choose. I would consider ringing them and asking them if they were not located in Germany as it would cost me a bomb! I did just now searching online via the Device Manager to see if he can find an update for the drivers but nothing came.

  Thanks for any help that anyone can offer :)

  The message is to be cause the BIOS looking for boot from LAN (not wireless) before it starts and then from the hard drive. The Media test failure is because to boot from LAN it tests to see if the wired Ethernet is connected, it is not if it generates the error message.

  Enter the BIOS press F2 after initial power on but before the Logo Windows shows

  Integrated devices should allow you to set the settings of wired network adapter. According to the BIOS it is either "enabled with PXE" or have another option to enable or disable the boot ROM

  In the boot options the LAN card should be removed altogether.

  This message is ONLY applicable to the transfer of the BIOS boot process and should have no impact on the problems of WiFi (it is not on WiFi)

• HP deskjet f4580: problems with the wireless

  Hi I have. Printing HP deskjet f4580 and I try to connect to my wifi but it doesn't I look on the hp page and I try to do by pressing the wps, but it did not help me pls thx

  PS I have an iPad without a computer mobile o

  Hello! @Liz1712, thank you for joining the HP Forums!

  I understand that you have your wireless printer connection problems.

  Please try a few steps recommended below.

  On the printer Panel, hold down the button for two seconds wireless.
  NOTE:
  The printer starts a timer that allows two minutes to push the button of the wireless router WPS.
  Hold down the button the router WPS wireless for several seconds. The printer automatically detects the wireless network and then configure the connection.
  If your printer connects successfully to the wireless network, proceed to the next step.
  If your printer is not connected to the network wireless with WPS, you must use a temporary USB connection to set up your printer on the wireless network. Go to the next step.

  Please refer to this article for more information: http://hp.care/2c5GfmP

  Let me know the results!

  Have a great weekend ahead!

• Problems with the wireless Assistant

  I built in router and it was working great until a few days ago, when he stopped turning.

  For some reason any whenever I try to open my HP Wireless Assistant, nothing happens.

  Now I can not connect to wireless networks. Any idea as then why this is happening? It's my router or Wireless Assistant.

  Try this online page to run the wireless setup application.

  Wireless and mobility - use the Network Wizard to configure your... :

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• I have a problem with the wireless is not connecting on the computer.

  I have my adsl connected by Ethernet to my pc but it does not work when I take the cord Ethernet how to pass Ethernet Wireless on the pc?

  Hello
  Is your ADSL wireless router option supports?
  If Yes, to connect to the ADSL router, go to Wireless ADSL router, enable the wireless option and set it up using your ID and password provided by your service provider, connect.
  You can configure a dedicated connection to your PC using the MAC ID and by doing that you can limit the other device to access your wireless network.

  Implementation process

  1::Sert Cook addaress PC IP is equal to the router IP address range
  2::enter Roter IP in the URL box
  3::go to wireless to the router configuration
  4:enable wireless in the router setup

• Problem with (map ISOTAP of Microsoft) wireless adapter

  I have a problem getting my wireless connection works, I can get online using a cable, but not with the radio.

  I checked the network adapters in the Device Manager and one of them that Microsoft ISATAP Adapter has a small triangle against it, in properties it says "this device does not work properly because Windows cannot load the drivers for this device. (Code 31)

  I tried to download the drivers but without success, I get a message saying that windows already has the latest drivers installed. I tried to uninstall it but could not get another to install, I eventually do a system restore to the date of his last load updates, but he did to reinstall one that works yet with the same error code. I tried many times to get a download that works, but no luck, anyone have any ideas?

  Hello

  1. which version of the operating system are you using?

  2. What is brand and model computer?

  I suggest you consult the site mentioned below:

  Windows wireless and wired network connection problems

  http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows.

  When you try to update the drivers such as suggested in the link, try to update the wireless network card drivers.

  If you use the Vista operating system, I suggest you consult the site mentioned below:

  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message

  http://support.microsoft.com/kb/932520.

• problem with the wireless mouse error code is pimou.sys

  I am trying to install a head mouse 3300 gears on a computer wireless laptop windows 7. He considers it, and install a driver then goes to blue screen, stops and gives error pimou.sys

  Anyone has an idea as to how I can solve this problem?

  Thanks for any help that anyone can give.

  John

  Hello

  Actually contact the manufacturer of the mouse support.

  You can ignore all the errors of the adapter. And they are not related to your problem of mouse.

  Don't you worry about this unless you have found errors. If so see these threads.

  http://social.answers.Microsoft.com/forums/en/w7network/thread/754c8f29-3a87-4E77-Babd-a69c8910e17e

  http://social.answers.Microsoft.com/forums/en-us/w7hardware/thread/05a8849e-89c1-4CC9-8004-f6d07a4fdf8b

  http://www.cableforum.co.UK/Board/34932105-post6.html

  ====================================

  A new Microsoft 6to4 map is created unexpectedly after restarting Windows 7 or Windows
  Server 2008 R2
  http://support.Microsoft.com/kb/980486

  How to disable certain Internet Protocol version 6 (IPv6) components in Windows Vista, Windows 7
  and Windows Server 2008
  http://support.Microsoft.com/kb/929852/en-us

  Response of Lionel Chen
  http://social.technet.Microsoft.com/forums/en-us/itprovistahardware/thread/3a503cdb-e61c-44BC-97c4-0b38b0e5f929/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Problems with the wireless printer, keep losing the connection by modem

  I keep the bad connection Wireless between my laptop and my wireless printer, a friend and I have tried many things to start, but nothing helped.

  Hello

  1. What is the brand and model of the computer?

  2 did you receive an error message?

  3 did you changes to the computer?

  Method 1:

  I suggest you to see link and check.

  I suggest you to perform troubleshooting services and check if they list any error messages-
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2: Run the Fixit tool from the link of the article below.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 3: Perform the steps in the below article mentioned.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 4: Update the printer from the printer manufacturer's drivers.

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  Reference: http://windows.microsoft.com/en-US/windows7/Install-a-printer

  See also:

  Wireless network card: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

• Problem with the hp pavilion dv6 2155ee wireless adapter after upgrading to Windows 7 Service Pack 1.

  Help me my wireless was working well and I have formatted my laptop windows 7 sp1 to windows 7 and I installed all the drivers and all

  work well only the Wireless does not and his permit and I can access the internet via cable (ethrnet) and when I troubleshoot say: problem
  with the wireless adapter or access point. Please help and thank you

  Thanks Nicolas and Hula, but Nicholas I told you my router works well I can access internet from another laptop and my mobile problem with my laptop however I formatted my laptop and I think that the problem was because I installed a driver that I can't install it and now my without wire is to find networks and I can access internet again however thanks for your help

• ProBook 450 G0: The problem with the ralink ralink RT3290 адаптер чипсет с Проблема RT3290 adapter

  The connection on the router TP - LINK Archer C2 problem. On the previous version of the driver for wi - fi doesn't appear, although it is (checked on the phone and tablet) but wifi on all other routers sees it. Installed version of the pilot on June 18, 2015 5.0.57.0. Screenshots of Wi - fi. But another problem appears: could not connect to Wi - Fi. Gives this error 'Windows cannot connect to the network' or 'connect without access to the Internet. Using manual reconnection to the network or restart the laptop. We're spontaneous deactivation of a Wi - Fi connection, even if the Wi - Fi network works correctly (currently, a Tablet and a work of smart phones over wi - fi). And poor quality. Even being near the place of distribution, there are problems with the wireless network. Another question is why the laptop is not catch wifi 5 GHz (on configured router)?

  Проблема соединения по роутером с Archer C2 TP-LINK wireless. На предыдущей версии драйвера соединение по wi - fi не видит, хотя оно есть (проверял на смартфонах и планшете), но wi - fi от других роутеров видит.Установил itself версии 5.0.57.0 от 18 июн 2015. A WiFi ловит. Но возникает другая проблема: не удается подключиться Wi - Fi Интернет к. Дает такую ошибку "Windows не подключиться сети к удается" или "Подключение без доступа к интернету". ПОМОГАЕТ ТОЛЬКО РУЧНОЕ ПЕРЕПОДКЛЮЧЕНИЕ К СЕТИ ИЛИ ПЕРЕЗАГРУЗКИ ЛАПТОПА. Есть спонтанное отключение сети Wi - Fi, хотя в Wi - Fi сеть работает нормально (в это планшет и смартфоны работают от wi - fi время). И КАЧЕСТВО СВЯЗИ ПЛОХОЕ. БУДУЧИ ДАЖЕ РЯДОМ ПО МЕСТУ РАСПРЕДЕЛЕНИЯ СУЩЕСТВУЮТ ПРОБЛЕМЫ n БЕСПРОВОДНОЙ СЕТЬЮ. Еще вопрос почему лаптоп не ловит wi - fi на частоте 5 ггц (на все настроенно роутере)?

  You can install MediaTek (Ralink) 802.11 b/g/n wireless LAN adapt driver

  Rev.D version 5.0.56.0 (June 10, 2015)

  -Fixes an issue where the system does not correctly connect to a wireless access point and the wireless network connection is limited.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_149767_1

  I think that RT3290 is a 2.4 GHz wireless module

  You can turn off Bluetooth in the BIOS for wireless performance batteries.