connect the bluetooth adapter
I try to install Targus USB Bluetooth Adapter and will have questions. Defrost not recognized. I have xp pro sp3. Istalled Bluetooth enumerator BUS and updated driver. I installed the software and driver from Targus and it is not recognized when I click on broadcom bluetooth usb. a single icon in the status bar and turns blue white when click Broadcom but red when you click Bluetooth Bus Enumerator. Can not find the device?
Help please
http://www.Targus.com/us/downloads/ACB20_UG.PDF hope this helps, Gerry Cornell
Tags: Windows
Similar Questions
-
How to connect the bluetooth iball-groovy head game
How to connect the bluetooth iball-groovy head game
Hi Gurushankar,
You can consult the following articles and check.
Connect to Bluetooth and other wireless or network devices
Add a Bluetooth device or other wireless or network device: frequently asked questions
Hope this information helps.
-
How to install the bluetooth adapter to 4.0 on my HP Pavilion p6-2304eb trust
I tried several times to install, but after installation, PC (windows 8.1) does not recognize my card?
message: plug the adapter
The bluetooth adapter is a TRUST 4.0 with productnumber 18187 bluetooth adapter.
plugged in USB 3.0.
Trust did not provide a driver for Windows 8.1, so the issue is not with your PC or operating system. Tyr plug it into a usb 2.0 port. USB 3.0 ports are picky about the devices.
The problem is that the bluetooth dongle has no support for Windows 8.1. Trusted contact .
Sorry to bear bad news. I go back the dongle and find one that suports Windows 8.1.
-
Need to connect the network adapter when the ethernet cable is not connected
Hi all and thanks for reading. I'm new to the both VMWare Fusion and new on Mac. I have a new MacBook Pro, I bought a month ago.
I have software that works only on PC and its license server is linked to the mac address of the NETWORK card. I am implemented on bridged network mode I use the multiplicity to link the Virtual PC to my other PC and it seems the network mode that works best for this.
I've set up to work with the virtual address of the NIC card and everything works fine. The problem comes when I'm traveling and my Mac isn't difficult, connected to an ethernet connection. When I start the merger, told me that 'the network bridge on/dev/vmnet0 unit does not work"and that she didn't connect the device virtual ethernet0. Under the terms of the merger, I get this error whenever I try to force the card /virtual machine/network/will connect the network adapter.
When I'm traveling or not hung, I need to get the virtual running NETWORK card so my license server will take place so that I can run my software. Any ideas? Any help is most appreciated!
Thank you
Mark
Change the type of the bridged network to NAT and then start the virtual machine.
-
I had my laptop Dell Vostro repaired under insurance in January 2013 after a spill of liquid. HAAC Ltd. has replaced most of the laptop - but the return, the SD card did not work. This seems to be due to the engineer he connects not properly and the company recommended it and returned it to me again. A couple of months, I found my USB was temperamental - so is my built in Bluetooth adapter. Last month - the wifi does not work for most of the time either so I have to connect to my router by wire.
This could be a problem in windows 7 - all my problems seem to be related to network adapters. If it's a hardware problem - does anyone know if it could be another loose connection? HAAC Ltd. only give a 3 month warranty on parts that seems just a little. But if this anomaly is due to the production of poor quality - that is not properly connect the laptop then I'll go back their again if they are responsible.
By the way – there's a switch wifi on the front of the laptop - but is not currently be recognized.
If anyone has settings that I could check that can help - especially if some inhibit the use of wifi.
Thank you very much
Hello
Your wifi switch not recognized is probably a hardware problem. The rest could be a hardware or software problem.
Method 1:
Lets start by doing a reset to coercive. Follow these steps:
- Unplug the notebook (remove power cord), then remove the battery.
- Disconnect all USB devices and the connections between the USB ports.
- Let the laptop only for several minutes.
- Then plug the power cord without connecting the USB devices. Then replace the battery.
- Plug each device in turn, allowing them to load the drivers of devices one at a time (plug in the appliance and wait its loading all its drivers before installing the next USB).
The computer recognizes the USB ports? All of them or none of them?
Method 2:
Open Control Panel, Manager of design. Click the view tab, and then click Show all devices. From there, you can remove all instances of USB devices and restart the computer to see if the problem resolves. Repeat this procedure with the wireless adapter (uninstall and reinstall, ensuring that there is only one instance of the wireless adapter).
Method 3:
Create a new user account by following the instructions in this article: http://windows.microsoft.com/en-US/Windows7/Create-a-user-account . Does this solve the problem? If the problem is resolved in a new user account, this means that the old user profile is damaged. Here is the link to repair a damaged user account: http://windows.microsoft.com/en-us/windows7/Fix-a-corrupted-user-profile.
Try these methods and post your results here. I'll be here waiting for the results!
Kind regards
BearPup
-
Satellite Pro 6100 turns off when I connect the power adapter
Satellite pro 6100 works well up to this I put AC adapter / CC, then turns it self
Any ideas would be appreciatedsee you soon
Hello
You use original Toshiba AC/DC adapter or another?
What happens if you connect the AC/DC adapter, while the laptop is turned off?It s really strange problem, but I think that is s TI associated with AC/DC adapter or the motherboard itself
-
M70 freezes when you connect the AC adapter / CC after warning of low battery
When I get the low battery warning, I connect to the AC adapter, but when I turn on the power, the laptop screen turns off. The domain controller in the LED lights up, the Power LED lights and the battery light but I can't use the keys on the keyboard, the laptop froze. Any ideas?
Try to go into sleep mode manually (start > shutdown > select standby). After that he goes to sleep, turn it back on. Do you have the same problem? You get the same problem if you are running on batteries, set up the computer to sleep manually and then put current alternative?
-
Satellite L500-1XZ - how to connect the port adapter or firewire?
How to connect an adapter or a firewire port? The specifications of my laptop refer to two expansion slots (one for the configuration). Where they are and how to connect a firewire adapter?
Thanx
Hey Buddy,
You can buy a PC Express card with firewire ports to connect your firewire devices. Ask your computer dealer preferred for this, they should be able to sell an expansion card.
For example, I founded it:
[LINDY FireWire - 2-port ExpressCard/34 card | http://www.amazon.co.uk/LINDY-FireWire-Card-Port-ExpressCard/dp/B000T5RNZQ/ref=sr_1_3?ie=UTF8&s=electronics&qid=1268765430&sr = 8-3] -
Tecra M5-388: touchpad question after you have connected the new adapter
Hello
I have recently brought a new adapter to replace my old on my Tecra M5-388 by ebay, it has the Toshiba logo on it and safety symbols and plug in my mouse immediately after began to falter on the point that I rely on and the touch pad has become rather not consistent; Disconnect the power supply and it goes back to normal.
The thing is that the former adapter was a clover sheet plug in brick, even if this new is a figure 8.
Does anyone know if the maps are specific to each model?
I'm a little worried that too much current is running through the laptop.Any help would be great.
Thank you
That s a great info!
-
Recently, ive got an xbox 360, as well as the wireless card. When I go to find my network, he doesn't go to the top on my list as one of the possible choices to connect to. Ive tried with my friend and it worked, if it is not the xbox or adapter. Ive also checked on the computer to ensure that the network is visible and not hidden not so I'm enough ideas. Any ideas?
Hi cdawg7734,
Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to the Xbox 360 system and would be better suited to the Xbox community. Please visit the link below to find a community that will provide the support you want.Hope this helps,
Kevin
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Try to connect the bluetooth headset
I have a hp pavilion p7-1257 c and im wondering is it possible to use bluetooth on this computer by simple update of drivers or do I have to buy an adapter
Hi Con87,
I can't find any reference to bluetooth on your PC as an option. Please see here and here.
You may need to buy an adapter.
Jaco
I'm not an employee of ch *.
"" "" Please give a "Bravo, Thumbs Up" If the notice is relevant or "accept as Solution" to help other users of the forum having a similar problem.
HP products:
810-150se office
17 t - j000 Notebook
H8 1380t CTO Desktop
560z Desktop -
Installation of the Bluetooth adapter problem
HP Pavilion dv6-6b27nr Notebook PC /Serial # 2CE1401DWX / product number: A1T17UA #ABA
I can't do any adapter Bluetooth to work on my laptop. I tried to use wizard of Bluetooth of Broadcom and it still does not work...
Any ideas on how to solve this problem?
Bluetooth problem has been resolved. Solution: Bored mother had broken a tiny connector. Connector was replaced and USB Port connections has been astablished...
-
T460s refreshing when you connect the AC adapter / CC
Lenovo's expensive
My T460s Thinkpad refreshes when I plug in or unplug the laptop charger.
All the drivers are up to date.
IM using windows 10.
By default, the refresh rate of the screen is reduced automatically when you disconnect the adapter to save power. Right-click on the "desktop", select "Graphics properties", click on 'Power', select 'on battery' and disable the change rate of auto update so this behavior is unintentional.
-
Hello
I have a problem with vga output. When I'm working on the battery and connect my laptop to external monitor is ok, but when I connect adapter then start waving also bluetooth and wlan is not working properly. In other cases when I disconnect laptop battery and connect the AC adapter it works correctly.
Thanks in advance
Hello
Can you please describe more precisely what is happening here? Does not properly is a rather general statement.
-
Unable to connect the earpiece/headset Bluetooth
Original title: Bluetooth device
Hello
I use a computer windows 7 dell laptop and having succumbed to my last 10 attempts to connect my sony with her bluetooth headset. Also, I went through all the links of responses provided by the site. I also downloaded the software device for her drive. The laptop also shows my SonyBTH under "Devices and Printers". But I'm still not able to connect my SonyBTH even after clicking on the indicated device.
Please kindly help me with this problem.
Anyone?
Thank you
Afonso Rajalim
Hi Afonso,
Thanks for posting your query in Microsoft Community.
I understand that you are unable to connect SonyBTH to the Windows 7 machine and I appreciate the efforts made in the patches that you tried. Let me ask you;
- Have you been able to connect to the same SonyBTH in the past?
- Remember to no particular change in the computer before the show?
- What security software is installed on the computer?
- What is the model number of your Dell computer?
There could be several reasons for this cause and diagnose the problem, we will try these steps and check.
Step 1: Make sure that Windows is configured to accept incoming Bluetooth connections.
You can check the compatible devices Bluetooth configuration panel. Here's how:
- Click the Start button, select Control Panel, click hardware and sound, and then click Bluetooth devices.
- Click the Options tab, select the allow the devices to connect to this computer check box, and then click OK.
Step 2: Remove and then reinstall the device:
1. click the Start button, select Control Panel, click hardware and soundand then click Bluetooth devices.
2 Select the device that is not working, and then click Remove.
3. click on Add, press the reset button on the unit (or make it discoverable following the manufacturer's instructions), check the box my device is set up and ready to be found and then click Next.
4. If the device is not found, repeat the previous step. When the device is found, select it, and then click Next.
5. follow the remaining instructions in the wizard.
· Make sure that the device is on and that the batteries should be replaced.
· Make sure that the Bluetooth adapter for your computer is attached and turned on, and that the device is in use and detectable. If you don't know how to turn on discoverability, read the instructions provided with the device or check the manufacturer's Web site.
Solving problems with Bluetooth devices compatible (applicable to Windows 7 as well)
Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.
Maybe you are looking for
-
Cosmio G30: no sound after upgrade Vista - no audio output device installed
Hello! I just installed Vista Ultimate and now is not any noise:(il dit aucun périphérique de sortie audio n'installé s'il vous plaît aider!)
-
Hi all First, I start only using LabVIEW and I am doing a project to use it to program a data acquisition and a Lego MINDSTORMS at the same time. I had downloaded LabVIEW 2010 and then fell on a LabVIEW for lego mindstorms. When you download the LabV
-
Pavillion G6 C6G57EA #ABU: how to set the G6 PC pavilion to start scanning
I have never before been scanned attachment data from a printer Canon mx 920 e-mail problem. I now receive this message, "set up the pc to start scanning. How do I do that?
-
HELP ASAP! problems with hp pavilion dv2500 display driver
Product: HP Pavilion dv2500 Entertainment Notebook PC OS: Windows Vista editions Home Premium Hello I had several cases where the computer seems 'lag '. then, after a few flickers on my screen, Windows would give the error: "Display driver stopped re
-
Windows vista restart after I stop I have to unplg the power to stop
whenever I closed my system reboot