Installation of the node2 RAC database

Similar Questions

• Add a new instance to the NON-RAC database?

  I could create a new instance to the non-rac database?
  
  I tried to use dbca to create the second instance, but I read, help, that is not possible.
  
  There is no way to create the second instance in a single database? (No. - CARS, no. - ASM, just a normal database)
  
  Thanks in advance.

  Instance = process and memory
  Basis of data = all data files.

  For a database no CARS, there is a one-to-one mapping between the instance and database.

  If you don't want to use an existing database to store the new patterns, you need to create a new database.

• Freezing of the Oracle RAC databases

  Hi all

  We use oracle database 11g version 11.2.0.1.0 RAC database standard edition having two active instances.

  Recently, we have been confronted with a database, freezing problem, the regular orders program has not run in DB.

  Can anyone suggest me how to find the reason of this problem and what needs to be monitored side DB for a few days?

  Thanks in advance.

  John, but this assumes that actually perform the jobs - would not quite the case.

  My meat with the question (as Konda explained), is owner of problem. Developers who seem to refuse to have their process not running problem, he blames on the database and now awaits the DBA to own the problem simply because of their opinion without merit (and a little ignorant) as the database "frozen".

  It is unfair to expect the DBA through all kinds of hoops to find the 'problem' in a bottom-up analysis of the problem.

  A fundamental question for developers should be, prove it. Showed the code to run (work performed). And then a question why there is no instrumentation in their code just to say what's happened...

• Need to size the Oracle RAC database settings and configurations as storage size % etc.

  Hi Experts,

  We have a requirment that we need size parameters of database to an Oracle database RAC 11g as the sizing of disk space, memory, and CPU (SAN), Cluster size etc what would the size of the recommendation for major banks or large project? Can you describe in sizes (TB). I'm not sure of the growth of the DB files on a daily basis and no customers.

  Thanks in advance.

  Viji

  It is a bit of an oxymoron.

  You ask for one RAC server sizing. When RAC architecture allows you to evolve by adding more servers.

  So if you have treatment volumeX to do, you have only 2 servers fabricant1 RAC to deal effectively with him. Or you can need 4 servers Fabricant2 CAR care effectively. There are many factors (unique to this client) which determines the choices made.

  So 'sizing' the server is not a matter to be treated, until you've decided just what type of server, you will use for your RAC (dual core, quad core, 8 cores, base 16, etc.), how much he must take care of the memory, the amount of energy, it would consume, it takes up the amount of space (rack units) in a Cabinet how much local diskspace, it must support, how many PCI slots must be to HBA and HCA and other cards, etc.

  Once this is decided (1 rack unit, dual core processors 4, 2 PCI slots, etc), can you evaluate vendors and server models available and decide how much of these servers must be purchased to meet the needs of data processing envisaged.

  If for example, the decision is 3 servers and after deployment, it is determined that server capacity has been underestimated, then a 4th server can be purchased and added to the cluster of 3 Server - and the cluster set scale to actually do deal with the volumes of data processing.

  One of the fundamental reasons for RAC is scalability. This means that only one server sizing is much less important than choosing the correct h/w architecture which allows to evolve this cluster by adding more h/w.

  It would be very stupid to buy and build a server 2 CARS which was 'size' for volumeX, then find that the volume is X + Y, and 2 servers can only be resized at great expense to 3 servers (for example 4 unit rack servers, rack unit space only 2 left in the cabinet, required for quad powersupply by server power cannot be satisfied for 3rd server) (, no fiber port more SAN, etc.).

• listener down randomly on the oracle Rac database

  Hello

  Given that we have done a database migration BECAUSE we have a listener who crashes, on a single node.

  Operating system is oracle linux 5

  version Oracle 10.2.0.4

  First I thought it was because of the conflict on the system. That I thought it was the rman backup that uses 3 channels. I changed it to 1 channel. But this does not resolve the issue.

  The listener log files shows:

  October 24, 2014 02:45:47 * ping * 12547

  AMT-12547: TNS: lost contact

  AMT-12560: TNS:protocol adapter error

  AMT-00517: lost contact

  Linux error: 32: Broken pipe

  October 24, 2014 02:45:47 * ping * 0

  October 24, 2014 02:45:47 * (CONNECT_DATA = (CID = (PROGRAM =) (HOST =hostname... com)(User=Oracle))(Command=services) (arguments = 64) (service = (Description = (Address = (Protocol = TCP) (HOST = 10 *. *.7)(PORT=1521)))(VERSION=169870336)) * services * 0)

  October 24, 2014 02:45:47 * (CONNECT_DATA = (CID = (PROGRAM =) (HOST = __jdbc__)(USER=)) (SERVICE_NAME = EX... com)) * (ADDRESS = (PROTOCOL = tcp) (HOST = 10 *. *.5)(PORT=26441)) * establish * example. com * 0

  October 24, 2014 02:45:47 * (CONNECT_DATA = (CID = (PROGRAM =) (HOST =hostname... com)(User=Oracle))(Command=Status) (arguments = 64)(service=LISTENER_hostname) (version = 169870336)) * status * 0

  Is no longer listening on: (DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = EXTPROC1)))

  Is no longer listening on: (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=10.**.**.7) (PORT = 1521)))

  Is no longer listening on: (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=10.**.**.5) (PORT = 1521)))

  Listener completed notification to the CRS stop

  
  

  
  

  and

  
  

  20 October 2014 02:07:59 * ping * 12547

  AMT-12547: TNS: lost contact

  AMT-12560: TNS:protocol adapter error

  AMT-00517: lost contact

  Linux error: 32: Broken pipe

  20 October 2014 02:07:59 * ping * 0

  20 October 2014 02:07:59 * (CONNECT_DATA = (CID = (PROGRAM =) (HOST = __jdbc__)(USER=)) (SERVICE_NAME = EX... com)) * (ADDRESS = (PROTOCOL = tcp (PORT = 25180))(HOST=10.**.**.5)) * establish * E.G. * .com * 0

  20 October 2014 02:07:59 * (CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME=EX.**.com) (FAILOVER_MODE = (TYPE = SELECT) (METHOD = BASIC)(RETRIES=180) (DELAY = 5)) (CID = (PROGRAM = C:\H2)(USER=Administrator))) * (ADDRESS = (PROTOCOL = tcp (PORT = 51520))(HOST=10.**.**.222)) * establish * exodus.))) com * 0

  20 OCTOBER 2014 02:07:59 * (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = EX... com) (FAILOVER_MODE = (type = SELECT) (Method = Basic)(RETRIES=180) (Delay = 5)) (CID = (PROGRAM = C:\er.exe)(HOST=-13)(USER=Administrator))) * (ADDRESS = (PROTOCOL = tcp (PORT = 58005))(HOST=10.**.**.23)) * establish * exodus.))) com * 0

  20 OCTOBER 2014 02:07:59 * (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = EX... com) (FAILOVER_MODE = (type = SELECT) (Method = Basic)(RETRIES=180) (Delay = 5)) (CID = (PROGRAM = C:\er.exe)(HOST-05)(USER=Administrator))(INSTANCE_NAME=EX1)) * (ADDRESS = (PROTOCOL = tcp (PORT = 62958))(HOST=10.**.**.15)) * establish * exodus.))) com * 12518

  TNS-12518: TNS:listener could not hand off client connection

  AMT-12571: failure of TNS:packet writer

  AMT-12560: TNS:protocol adapter error

  AMT-00530: Protocol adapter error

  Linux error: 104: connection reset by peer

  20 OCTOBER 2014 02:07:59 * (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = EX... com) (FAILOVER_MODE = (type = SELECT) (Method = Basic)(RETRIES=180) (Delay = 5)) (CID = (PROGRAM = C:\MServer.exe)(HOST=MEDIASTOR-02)(USER=Administrator))) * (ADDRESS = (PROTOCOL = tcp (PORT = 64954))(HOST=10.**.**.12)) * establish * exodus.))) com * 12518

  TNS-12518: TNS:listener could not hand off client connection

  AMT-12571: failure of TNS:packet writer

  AMT-12560: TNS:protocol adapter error

  AMT-00530: Protocol adapter error

  Linux error: 104: connection reset by peer

  20 OCTOBER 2014 02:07:59 * (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = EX... com) (FAILOVER_MODE = (type = SELECT) (Method = Basic)(RETRIES=180) (Delay = 5)) (CID = (PROGRAM = C:\Mnge.exe)(HOST=-14)(USER=Administrator))) * (ADDRESS = (PROTOCOL = tcp (PORT = 49566))(HOST=10.**.**.24)) * establish * exodus.))) com * 12518

  TNS-12518: TNS:listener could not hand off client connection

  AMT-12571: failure of TNS:packet writer

  AMT-12560: TNS:protocol adapter error

  AMT-00530: Protocol adapter error

  My crsd.log shows:

  2014-10-22 02:04:57.670: [CRSEVT] [687806784] 0CAAMonitorHandler: 0:Action Script/u01/src/bin/racgwrap (check) has expired for ora.amcmstvdb01.vip! (timeout = 60)

  2014-10-22 02:04:57.671: 0CheckResource error [CRSAPP] [687806784] ora.amcmstvdb01.vip = - 2 Error Code

  2014-10-24 02:19:13.940: 0CheckResource error [CRSAPP] [685705536] ora.amcmstvdb01.LISTENER_AMCMSTVDB01.lsnr = 1 error Code

  2014-10-24 02:19:13.967: [CRSRES] [685705536] 0 in stateChanged, target of ora.amcmstvdb01.LISTENER_AMCMSTVDB01.lsnr is online

  2014-10-24 02:19:13.969: [CRSRES] [685705536] 0ora.amcmstvdb01.LISTENER_AMCMSTVDB01.lsnr on amcmstvdb01 went OFFLINE unexpectedly

  2014-10-24 02:19:13.973: [CRSRES] [685705536] 0StopResource: set the values of the CLI

  2014-10-24 02:19:13.981: 0Attempting [CRSRES] [685705536] to stop the "ora.amcmstvdb01.LISTENER_AMCMSTVDB01.lsnr" Member "amcmstvdb01".

  2014-10-24 02:28:16.221: [CRSRES] [685705536] 0Stop "ora.amcmstvdb01.LISTENER_AMCMSTVDB01.lsnr" Member "amcmstvdb01" has succeeded.

  2014-10-24 02:28:16.223: [CRSRES] [685705536] 0ora.amcmstvdb01.LISTENER_AMCMSTVDB01.lsnr RESTART_COUNT = 0 RESTART_ATTEMPTS = 5

  2014-10-24 02:28:16.224: [CRSRES] [685705536] 0Restarting ora.amcmstvdb01.LISTENER_AMCMSTVDB01.lsnr on amcmstvdb01

  2014-10-24 02:28:16.227: [CRSRES] [685705536] 0startRunnable: set the values of the CLI

  2014-10-24 02:28:16.228: 0Attempting [CRSRES] [685705536] to launch "ora.amcmstvdb01.LISTENER_AMCMSTVDB01.lsnr" Member "amcmstvdb01".

  2014-10-24 02:45:03.791: [CRSEVT] [685705536] 0CAAMonitorHandler: 0: could not enter oracle/10.2.0/db_1/bin/racgwrap(start)

  Category: 1234, operation: scls_process_join, loc: childcrash, operating system error: 0, other: an abnormal termination of the child

  2014-10-24 02:45:03.791: [CRSEVT] [685705536] 0CAAMonitorHandler: 0:Action Script oracle/10.2.0/db_1/bin/racgwrap(start) expired for ora.amcmstvdb01.LISTENER_AMCMSTVDB01.lsnr! (timeout = 600)

  2014-10-24 02:45:03.792: 0StartResource error [CRSAPP] [685705536] ora.amcmstvdb01.LISTENER_AMCMSTVDB01.lsnr = - 2 Error Code

  2014-10-24 02:45:21.220: [CRSEVT] [687806784] 0CAAMonitorHandler: 0: could not enter oracle/10.2.0/db_1/bin/racgwrap(check)

  Category: 1234, operation: scls_process_join, loc: childcrash, operating system error: 0, other: an abnormal termination of the child

  2014-10-24 02:45:21.222: [CRSEVT] [687806784] 0CAAMonitorHandler: 0:Action Script oracle/10.2.0/db_1/bin/racgwrap(check) expired for ora. EX. EX1.inst! (timeout = 600)

  2014-10-24 02:45:21.223: 0CheckResource error [CRSAPP] [687806784] to the ora. EX. EX1.inst = - 2 Error Code

  2014-10-24 02:45:50.080: [CRSRES] [685705536] "ora.amcmstvdb01.LISTENER_AMCMSTVDB01.lsnr" Member "amcmstvdb01" 0Start failed.

  2014-10-24 02:45:50.084: [CRSRES] [685705536] 0ora.amcmstvdb01.LISTENER_AMCMSTVDB01.lsnr broken amcmstvdb01 moving.

  2014-10-24 02:45:50.103: 0Cannot [CRSRES] [685705536] move ora.amcmstvdb01.LISTENER_AMCMSTVDB01.lsnrStopping dependants

  2014-10-24 02:45:50.111: [CRSRES] [685705536] 0StopResource: set the values of the CLI

  2014-10-24 11:23:09.036: [CRSRES] [687806784] 0ora.amcmstvdb01.LISTENER_AMCMSTVDB01.lsnr target the OFFLINE value before stop action

  2014-10-24 11:23:09.037: [CRSRES] [687806784] 0StopResource: set the values of the CLI

  2014-10-24 11:23:09.046: 0Target [CRSRES] [687806784] the OFFLINE value for "ora.amcmstvdb01.LISTENER_AMCMSTVDB01.lsnr".

  2014-10-24 11:23:09.115: [CRSRES] [687806784] 0ora.amcmstvdb01.ons target the OFFLINE value before stop action

  2014-10-24 11:23:09.116: [CRSRES] [687806784] 0StopResource: set the values of the CLI

  2014-10-24 11:23:09.124: 0Attempting [CRSRES] [687806784] to stop the "ora.amcmstvdb01.ons" Member "amcmstvdb01".

  2014-10-24 11:23:10.142: [CRSRES] [687806784] 0Stop "ora.amcmstvdb01.ons" Member "amcmstvdb01" has succeeded.

  2014-10-24 11:23:10.212: [CRSRES] [687806784] 0ora.amcmstvdb01.vip target the OFFLINE value before stop action

  2014-10-24 11:23:10.213: [CRSRES] [687806784] 0StopResource: set the values of the CLI

  2014-10-24 11:23:10.221: 0Attempting [CRSRES] [687806784] to stop the "ora.amcmstvdb01.vip" Member "amcmstvdb01".

  2014-10-24 11:23:11.232: [CRSRES] [687806784] 0Stop "ora.amcmstvdb01.vip" Member "amcmstvdb01" has succeeded.

  2014-10-24 11:23:11.268: [CRSRES] [687806784] 0ora.amcmstvdb01.gsd target the OFFLINE value before stop action

  2014-10-24 11:23:11.269: [CRSRES] [687806784] 0StopResource: set the values of the CLI

  2014-10-24 11:23:11.277: 0Attempting [CRSRES] [687806784] to stop the "ora.amcmstvdb01.gsd" Member "amcmstvdb01".

  2014-10-24 11:23:12.284: [CRSRES] [687806784] 0Stop "ora.amcmstvdb01.gsd" Member "amcmstvdb01" has succeeded.

  2014-10-24 11:23:23.714: [CRSRES] [687806784] 0startRunnable: set the values of the CLI

  2014-10-24 11:23:23.723: 0Attempting [CRSRES] [687806784] to launch "ora.amcmstvdb01.gsd" Member "amcmstvdb01".

  2014-10-24 11:23:24.740: [CRSRES] [687806784] "ora.amcmstvdb01.gsd" Member "amcmstvdb01" 0Start succeeded.

  2014-10-24 11:23:24.840: [CRSRES] [687806784] 0startRunnable: set the values of the CLI

  2014-10-24 11:23:24.847: 0Attempting [CRSRES] [687806784] to launch "ora.amcmstvdb01.vip" Member "amcmstvdb01".

  2014-10-24 11:23:26.857: [CRSRES] [687806784] "ora.amcmstvdb01.vip" Member "amcmstvdb01" 0Start succeeded.

  2014-10-24 11:23:26.962: [CRSRES] [687806784] 0startRunnable: set the values of the CLI

  2014-10-24 11:23:26.971: 0Attempting [CRSRES] [687806784] to launch "ora.amcmstvdb01.ons" Member "amcmstvdb01".

  2014-10-24 11:23:27.017: [OCRUTL] [683604288] u_freem: mem passed is null

  2014-10-24 11:23:28.983: [CRSRES] [687806784] "ora.amcmstvdb01.ons" Member "amcmstvdb01" 0Start succeeded.

  2014-10-24 11:23:29.093: [CRSRES] [687806784] 0startRunnable: set the values of the CLI

  2014-10-24 11:23:29.099: 0Attempting [CRSRES] [687806784] to launch "ora.amcmstvdb01.LISTENER_AMCMSTVDB01.lsnr" Member "amcmstvdb01".

  2014-10-24 11:23:30.110: [CRSRES] [687806784] "ora.amcmstvdb01.LISTENER_AMCMSTVDB01.lsnr" Member "amcmstvdb01" 0Start succeeded.

  2014-10-27 03:07:00.415: 0CheckResource error [CRSAPP] [687806784] ora.amcmstvdb01.LISTENER_AMCMSTVDB01.lsnr = 1 error Code

  2014-10-27 03:07:00.421: [CRSRES] [687806784] 0 in stateChanged, target of ora.amcmstvdb01.LISTENER_AMCMSTVDB01.lsnr is online

  2014-10-27 03:07:00.423: [CRSRES] [687806784] 0ora.amcmstvdb01.LISTENER_AMCMSTVDB01.lsnr on amcmstvdb01 went OFFLINE unexpectedly

  2014-10-27 03:07:00.424: [CRSRES] [687806784] 0StopResource: set the values of the CLI

  2014-10-27 03:07:00.430: 0Attempting [CRSRES] [687806784] to stop the "ora.amcmstvdb01.LISTENER_AMCMSTVDB01.lsnr" Member "amcmstvdb01".

  2014-10-27 03:07:02.437: [CRSRES] [687806784] 0Stop "ora.amcmstvdb01.LISTENER_AMCMSTVDB01.lsnr" Member "amcmstvdb01" has succeeded.

  2014-10-27 03:07:02.439: [CRSRES] [687806784] 0ora.amcmstvdb01.LISTENER_AMCMSTVDB01.lsnr RESTART_COUNT = 0 RESTART_ATTEMPTS = 5

  2014-10-27 03:07:02.440: [CRSRES] [687806784] 0Restarting ora.amcmstvdb01.LISTENER_AMCMSTVDB01.lsnr on amcmstvdb01

  2014-10-27 03:07:02.443: [CRSRES] [687806784] 0startRunnable: set the values of the CLI

  2014-10-27 03:07:02.444: 0Attempting [CRSRES] [687806784] to launch "ora.amcmstvdb01.LISTENER_AMCMSTVDB01.lsnr" Member "amcmstvdb01".

  2014-10-27 03:07:04.564: [CRSRES] [687806784] "ora.amcmstvdb01.LISTENER_AMCMSTVDB01.lsnr" Member "amcmstvdb01" 0Start succeeded.

  2014-10-27 03:07:04.566: [CRSRES] [687806784] rebooted 0Successfully ora.amcmstvdb01.LISTENER_AMCMSTVDB01.lsnr on amcmstvdb01, RESTART_COUNT = 1

  2014-10-27 03:07:04.571: [CRSRES update] [687806784] 0ora.amcmstvdb01.LISTENER_AMCMSTVDB01.lsnr LAST_RESTART time in ocr

  2014-10-28 02:17:25.278: [CRSEVT] [875006272] 0CAAMonitorHandler: 0: could not enter/u01/src/bin/racgwrap (check)

  Category: 1234, operation: scls_process_join, loc: childcrash, operating system error: 0, other: an abnormal termination of the child

  It could be because:

  https://support.Oracle.com/epmos/faces/DocumentDisplay?_afrLoop=380194821865447 & ID = 985170.1 & DisplayIndex = 2 & _afrWindowMod...

  https://support.Oracle.com/epmos/faces/SearchDocDisplay?_adf.CTRL-State=drbucptmm_436 & _afrLoop = 385944517854402 #SYMPTOM

  I hope you can give me a hint or two on how to solve this problem.

  Regards and thanks in advance.

  The problem was the backup script that was executed on the server.

  He used a linux 'cp' command to copy the tar.gz (compressed backup file) file to a share that has been configured as automount. Don't ask me why.

  For some reason, this caused the CPU up to 250% which of course killed any response from the server.

  I replaced the command copy with rsync and everything seems to work fine now.

  Kind regards

• Duplicate target for RAC database

  Oracle Database 11g Enterprise Edition
  Red Hat Linux
  
  
  Hello
  
  I'm a RAC database cloning using the command duplicate target database. First of all, we need create an auxiliary Instance using the source RAC database init file.
  
  I see the following in the init file,
  
  Mdb1.undo_tablespace = "UNDOTBS1.
  MDB2.undo_tablespace = "UNDOTBS2".
  
  
  What should I enter in the file init auxiliary instance for these Undo tablespace? I'll put CLUSTER_DATABASE false since the duplicate database is a single instance one. Only the Source database is RAC.
  
  
  I'm cloning only SYSTEM, SYSAUX tablespace user and tablespaces Cancel two to 14 days sometime back. I'm ignoring all other storage spaces.

  You only need a cancellation single tablespace... you can also create one afterwards if you want.

• Database upgrade to 12 c after the installation of the new R12.2.0 with quick install StartCd 50

  Hi all

  I just finished Installationavecuneracine R12.2.0 Quick Install StartCd 50. Now, I must go to R12.2.5 to the 12.1.0.2 database.

  First of all, I'm working on the database now and you wonder if you have step by step guide lines or upgrade instructions. I read some of the Notes Oracle but it is quite confusing.

  That's what I've done so far.

  -Install the software RDBMS 12cR1

  -R12cR1 examples installation CD

  -Create the directory/nls/data/9idata

  -Install all the patches of database and Application pre-required

  -Remove the SYS. INDEX $ ENABLED

  -Remove the MGDSYS schema

  -Run the pre upgrade tool

  -DBUA upgrade of database use. He managed.

  
  

  I think that the next steps would be:

  -Configure the network to copy and edit tnsnames.ora, listner.ora files, etc.

  -copy appsutil.zip to the new $ORACLE_HOME and unzip

  
  

  Notes, instructions or pointers would be greatly appreciated.
  

  Solved... service_name was incorrect.

  Thank you all... :-)

• Turning to Oracle RAC to the only Oracle database

  Hi all

  We are responsible for "make a copy" of Oracle RAC database a customer and our plan is to finish with the FCAC and allows you to host a new unique Oracle database. Very few of us familiar with CARS and looking for suggestions on how to do it (without affecting the source JAR).

  Can take a full expdb of the source database and simply use impdp to import into the standalone database server?

  Comments/suggestions appreciated.

  Thanks in advance.

  Can take a full expdb of the source database and simply use impdp to import into the standalone database server?

  It is an option. Data pump does not care if the source and/or destination is CARS or a mix. If the database is too large, it can take a lot of time to complete.

  Another option is to use the DOUBLE of RMAN feature. And another option is to restore the database from a backup.

  See you soon,.
  Brian

• Company of Mgr 12 lost connection to the RAC databases after the restart of the EM

  
  This last weekend, we restarted our main production RAC database (name = prod, instances = prod1 and prod2) and our certification test RAC database (name = cert, instances = cert1 and cert2).

  These databases have been put up and work OK as a target in MS 12 c for a few months.  However, I was not able to connect to these databases into EM yesterday, so I rebooted the server database repository EM both of EM application server.

  As of today, I can connect to the web console of EM successfully, and I can bring up our databases not CARS.  But if I try to put in place either of our CARS (prod or cert) databases, or if I try to put in place a specific instance prod1, prod2 or cert1, cert2, I get errors like this:

  IO error: the network adapter could not establish the connection

  The connection descriptor was (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = tcp) (HOST = nhaoranla - oracle.nha.local)(PORT=1521))) (CONNECT_DATA = (SID = cert1) (SERVER = DEDICATED)))

  The server nhaoranla where cert1 database instance.  We use the standard port 1521 for all targets.

  Two CARS of prod and cert authorities are running, and user applications are able to connect to the two bodies.

  I have not changed anything in EM.  The only difference with last week's restart.

  I tried to restart the server applications EM once again, but that solves nothing, I get the same error.

  Any suggestions or bugs that are known for this problem would be appreciated.

  Figured out what the problem was... TCP error message indicated it was looking for nhaoranla - oracle.nha.local , but I nhaoranla-oracle in/etc/hosts on the server to OEM applications.

  Lesson learned... If you add databases to the OEM through node discovery, initially, it could work, but it will fail when you restart your server OEM if you don't have good (complete) entries in/etc/hosts.

• IF database-> RAC database: estimate of the size of the SGA for each instance

  Hello!

  Let's say that there is a single instance with SGA 100 G size DB (assume this size is optimal for this database).

  If this database is intended to be converted to a RAC database with 2 instances (suppose DB workload will be spread over multiple instances).

  How to estimate the needs of SGA size for each instance in the RAC database?

  It takes 50G + General cool CARS (say 15%) for each instance?

  (Do not consider situation when one of the instances has failed, and all the charge redirects to an instance having survived)

  I'd be grateful if someone has offered or provided useful references.

  ---

  Kind regards

  Kyrylo

  As a general rule, I would size the SGA on new nodes to 120% of the SGA to single instance. Yes, this means that you will more than double the size of the SGA. You will need additional space to hold the load memory Cache Fusion. And the buffer Cache are possibly a little more space to store additional versions of blocks that seem to accompany the many implementations of CARS. Now, it's just a rule of thumb, so it has a high degree to be very wrong.

  You'll want to consider two big things... (1) the service being used. Will you take advantage of the services to perform the partitioning application? If so, instances can see various workloads that can lead to requests for different resources. (2) you will support a kind of failover (TAF or manual failover) applications? If so, then the LMS must be sufficiently sized to support the additional workload.

  See you soon,.
  Brian

• How to upgrade the Client installation from the Admin 12.1.0.2 to the most recent Group of patches available for the installation of the database.

  Hello

  We have sql client version 12.1.0.2 which has some issues in terms of sqlloader does not. This has been fixed by the patches oracle 20315685 group. Can someone help us understand how to install this group of patches on the installation of the Client. How to get on the client only the upgrade from group fixes provided by oracle.20315685 in this case.

  Concerning

  Patch 20315685 is WINDOWS BUNDLE PATCH 12.1DB. 0.2.2

  It is a bundle patch is developed to fix bugs related to 12.1.0.2.0 version on windows platform.

  This patch is common for the database server and Client.

  To apply the patch

  (1) services the customer stop like sqlplus, sqlloader

  (2) unzip the downloaded patch

  (3) cd

  (4) set as % ORACLE_HOME %path% environment variable

  (5) %ORACLE_HOME%/OPatch/opatch apply

  It will apply the necessary corrections.

• Installation of the R 11.2 grid Infrastructure and RAC on AIX 7.1

  By referring to:

  Manual 'Oracle Grid Infrastructure -
  "Installation Guide 11 g Release 2 (11.2) for AIX on POWER Systems (64-Bit).
  E48294- 01

  Chapter 2.7, "id Software".
  requirements '.

  Q: as prerequisites to IM and
  Installation of RAC, we ABSOLUTELY NEED to have installed

  -ADA (OC PowerAda 5.5 systems),

  -Pro * Fortran (IBM XL Fortran v. 11.1 April)
  2008 MFPS for AIX)
  
  -Pro * COBOL and

  -Oracle Messaging Gateway (IBM WebSphere MQ
  V6.0.2.0)?

  We wish to avoid
  unnecessary scopes during this installation.

  The overview of the project:

  We run Oracle EBS R 12.1.3 on RDBMS
  11.2.0.3 on AIX 6.1, simple installation of the enclosure.

  Plan is a proof of concept and
  migration/switch to: two new boxes AIX 7.1, install GI 11g R2, RAC and set up
  OEBS to run in clustered environment. RDBMS and EBS will be cloned to

  existing environment.

  Thx a lot!

• The customer need to oracle database in the installation of the EPM FDM

  Hi all

  I want to install EPM11.1.2.2 products and on one server I install FDM. I checked the condition sine qua non of the installation of FDM and according to the guidelines of this customer database Oracle 32-bit and 64-bit client is necessary.

  Server is Windows 2008 64 bit and already Oracle database 11g is installed.

  I have reg queries following it.

  1. If the Oracle database is installed on the same server, do I need to install both clients of the database as well?

  2. If so, I am trying to install oracle database 32-bit client but the screen is endangered shows no newspaper or mistake, but at the same time 64-bit client is installing successfully?

  3. I have not installed ODAC, what is the significance of this facility, and what I need to install the same?

  Help, please.

  Thank you

  Hi all

  Got the solution to the problem of the 32-bit client installation on the same machine where oracle 64-bit database or oracle customer base 64 is already installed.

  I took knowledge oracle support 1292785.1 document IDs and found the solution.

  Thank you for all your help.

• installation of vRA 7.0 database fail the simple installation

  I'm doing a clean install of vRA 7.0 with the wizard and selcting the simple installation with DB external. DB is created during installation.

  The Installation fails after a certain time the part of the database running with an error message:

  < servername IAAS > (SQL Server: < SQL Server name >) database has failed

  Output from the command

  Message:

  VRealize Automation server configuration error. For more information, see vCAC - Config.log after collecting newspapers IaaS.

  Description:

  Output:

  Download the installer...

  Runtime: 00:02.625

  Successful download.

  Installation of the files Server Custom vCAC disk Setup program

  "Run: 'C:\Users\ < username > \AppData\Local\Temp\VMware\vCAC\\vCAC-Server-Setup.exe' / s/w/v" / qn ADDLOCAL = Database INSTALLDIR = \ "C:\Program Files (x 86) \VMware\vCAC\\Server\" /Lvoicewarmup! Files \"C:\Program (x86)\VMware\vCAC\InstallLogs\Server-Setup.log" ")

  vCAC Server Custom Setup successful Installation, ExitCode:0

  Runtime: 00:17.231

  Configuration vCAC IaaS main components:

  -Database

  Execution: 'C:\Program Files (x86)\VMware\vCAC\Server\ConfigTool\\vCAC-Config.exe' / s ' / P:C:\Users\ < username > \AppData\Local\Temp\VMware\vCAC\\ConfigToolProperties.vCAC-Server-Database-ConfigTool.xml "" / L:C:\Program files (x86)\VMware\vCAC\InstallLogs\vCAC-Config.log.

  vCAC-Server-Custom-database - ConfigTool Installation Failed, ExitCode:5500

  VRealize Automation server configuration error. For more information, see vCAC - Config.log after collecting newspapers IaaS.

  Runtime: 00:09.129

  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  vCAC - Config.log:

  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  2016-01-11 12 01 38 222: = logging started the 2016-01-11 12 01 38 206 =.

  2016-01-11 12 01 38 222: product version: 7.0.0.5833.

  News: 2016-01-11 12 01 38 269: initialization of the functionality of database configuration property. Node Lu DATABASE_INSTANCE.

  Initialization of the functionality of database configuration property. Node read DATABASE_NAME.

  Initialization of the functionality of database configuration property. Node Lu DATA_PROTECTED.

  Initialization of the functionality of database configuration property. Node Lu DATABASE_DATA_PATH.

  Initialization of the functionality of database configuration property. Node Lu DATABASE_LOG_PATH.

  Initialization of the functionality of database configuration property. Node Lu WINDOWS_AUTHEN_DATABASE_INSTALL_FLAG.

  Initialization of the functionality of database configuration property. Node Lu DATABASE_INSTALL_SQL_USER.

  Initialization of the functionality of database configuration property. Node Lu DATABASE_INSTALL_SQL_USER_PASSWORD.

  Initialization of the functionality of database configuration property. Node Lu PRECREATED_DATABASE_FLAG.

  Initialization of the functionality of database configuration property. Node Lu CREATE_MSSQL_AZMAN_STORE_FLAG.

  Initialization of the functionality of database configuration property. Node Lu DATABASE_USE_ENCRYPTION.

  News: 2016-01-11 12 01 38 379: execution of C:\Windows\Microsoft.NET\Framework\v4.0.30319\MsBuild.exe "C:\Program Files (x86)\VMware\vCAC\Server\Database\DeployVMPS.xml' /t:BuildDB p:UsePreCreatedDatabase = 'False' p:DBServer ="< SQL Server name >" DBName = "DB <>name" /p:DBUser = "" /p:DBPassword = * "

  News: 2016-01-11 12 01 38 677: version of Microsoft (R) Build Engine 4.0.30319.34209

  News: 2016-01-11 12 01 38 677: [Microsoft .NET Framework, version 4.0.30319.34209]

  News: 2016-01-11 12 01 38 677: Copyright (C) Microsoft Corporation. All rights reserved.

  News: 2016-01-11 12 01 39 147: Build started 11.01.2016 12:01:39.

  News: 2016-01-11 12 01 39 633 'C:\Program Files (x86)\VMware\vCAC\Server\Database\DeployVMPS.xml' project on node 1 (Target BuildDB.

  News: 2016-01-11 12 01 39 633: BuildDB:

  News: 2016-01-11 12 01 39 633: #BuildDB # create and populate the database

  News: 2016-01-11 12 01 39 648: sqlcmd-s < servername SQL >-i CreateDatabase.sql - v DBName = '< name >' DBDir = "------." LogDir = "\." b

  News: 2016-01-11 12 01 45 025: creation of database '< DB name > '.

  News: 2016-01-11 12 01 45 025: newspapers directory and database SQL default database

  News: 2016-01-11 12 01 45 025: definition of SQL 2008 database compatibility level.

  News: 2016-01-11 12 01 45 025: deactivation of the full text search.

  News: 2016-01-11 12 01 45 025: setting parameters of database.

  News: 2016-01-11 12 01 45 119: run CreateDatabase.sql.

  News: 2016-01-11 12 01 45 151: sqlcmd-S < servername SQL > d '< name DB >'-i VMPSOpsUser.sql - v = "<>username" ServiceUser UseWindowsAuthentication = 'True '.

  News: 2016-01-11 12 01 45 480: run VMPSOpsUser.sql.

  News: 2016-01-11 12 01 45 825: project 'C:\Program Files (x86)\VMware\vCAC\Server\Database\DeployVMPS.xml' (1) built 'C:\Program Files (x86)\VMware\vCAC\Server\Database\Liquibase.xml' (2) on node 1 (Target RunLiquibase.

  News: 2016-01-11 12 01 45 825: RunLiquibase:

  Info: 2016-01-11 12 01 45 825: ' \bin\java.exe»-Djsse.enableCBCProtection=false-Djava.library.path="C:\Program files (x 86) \VMware\vCAC\Server\Database"-cp "liquibase.jar; "jtds - 1.3.1.jar ' liquibase.integration.commandline.Main - driver = net .sourceforge .jtds .jdbc .driver - url = jdbc:jtds:sqlserver: / / < servername SQL > / '< name of DB > '; SSL = request releaseLocks

  News: 2016-01-11 12 01 45 840: the system cannot find the path specified.

  News: 2016-01-11 12 01 45 840: C:\Program Files (x86)\VMware\vCAC\Server\Database\Liquibase.xml(28,5): error MSB3073: the command "" \bin\java.exe»-Djsse.enableCBCProtection=false-Djava.library.path="C:\Program files (x 86) \VMware\vCAC\Server\Database" "-cp"liquibase.jar; "jtds - 1.3.1.jar ' liquibase.integration.commandline.Main - driver = net .sourceforge .jtds .jdbc .driver - url = jdbc:jtds:sqlserver: / / < servername SQL > / '< name of DB > '; SSL = application releaseLocks' came out with code 3.

  News: 2016-01-11 12 01 45 856: construction project is "C:\Program Files (x86)\VMware\vCAC\Server\Database\Liquibase.xml" (RunLiquibase target - failed.

  News: 2016-01-11 12 01 45 887: construction project is "C:\Program Files (x86)\VMware\vCAC\Server\Database\DeployVMPS.xml" (BuildDB target - failed.

  News: 2016-01-11 12 01 45 887: Build FAILED.

  News: 2016-01-11 12 01 45 887: "C:\Program Files (x86)\VMware\vCAC\Server\Database\DeployVMPS.xml" (target BuildDB) (1)->

  News: 2016-01-11 12 01 45 887: "C:\Program Files (x86)\VMware\vCAC\Server\Database\Liquibase.xml" (target RunLiquibase) (2)->

  News: 2016-01-11 12 01 45 887->:(RunLiquibase target)

  News: 2016-01-11 12 01 45 887: C:\Program Files (x86)\VMware\vCAC\Server\Database\Liquibase.xml(28,5): error MSB3073: the command "" \bin\java.exe»-Djsse.enableCBCProtection=false-Djava.library.path="C:\Program files (x 86) \VMware\vCAC\Server\Database" "-cp"liquibase.jar; "jtds - 1.3.1.jar ' liquibase.integration.commandline.Main - driver = net .sourceforge .jtds .jdbc .driver - url = jdbc:jtds:sqlserver: / / < servername SQL > / '< name of DB > '; SSL = application releaseLocks' came out with code 3.

  News: 2016-01-11 12 01 45 981: 0 warning (s)

  News: 2016-01-11 12 01 45 981: 1 error (s)

  News: 2016-01-11 12 01 45 981: 00:00:06.74 time

  the key here is:

  ------------

  News: 2016-01-11 12 01 45 840: the system cannot find the path specified.

  "News: 2016-01-11 12 01 45 840: C:\Program Files (x86)\VMware\vCAC\Server\Database\Liquibase.xml(28,5): error MSB3073: the command""\bin\java.exe" -Djsse.enableCBCProtection=false-Djava.library.path="C:\Program files (x 86) \VMware\vCAC\Server\Database"-cp "liquibase.jar; "" jtds - 1.3.1.jar ' liquibase.integration.commandline.Main - driver = net .sourceforge .jtds .jdbc .driver - url = jdbc:jtds:sqlserver: / // ''; SSL = application releaseLocks' came out with code 3.

  ------------

  which means, Java is not installed/set up correctly or not accessible for the user is installing.

  You need:

  64-bit JRE (not x 86) installed on the Windows machine and successfully added to JAVA_HOME of the computer, so that each user (or at least, the user that ins Setup) to run java.

  A reboot of the windows machine may be necessary after installing java

  The wizard is supposed to handling everything, but something is wrong in your case.

• major differences of exadata database, listener, process than the normal RAC environment?

  I would ask for any input about the major differences of exadata database, listener, process than the normal RAC environment.

  I know now the exadata have not only SCAN listeners, but many other listeners. expert here can provide clarification?

  Thank you

  All the right questions... Welcome to the world of Exadata.

  These are questions that could get into a lot more detail and discussion than a forum post. At a high level, you certainly don't want delete all indexes on Exadata. However, you need to index and an indexing strategy will change on Exadata. After you move a database from one not Exadata Exadata environment you are probably more indexed. Indexes used for OLTP transactions real - looking one or a few lines among others will usually quickly with an index. The index used to avoid a percentage of records but always returning number of records can often be moved. On the index depends on the nature of the workload and your application. If you have a control on the index, then test your queries and DML with the index (s) invisible. Check your implementation plan, the columns io_cell_offload in v$ sql, smart scan wait events to ensure you get intelligent analysis... and see if the smart scan is faster than using the index (s). The real-time SQL Monitor is an excellent tool to help with this - use dbms_sqltune or grid/cloud control.

  Parallelism is a great tool to help still speed up queries and direct path loading operations and can help prompt smart scans... but use of parallelism really depends on your workload and must be controlled using DBRM and the parallel init parms, possibly using same parallel declaration put on hold, so it is not overwhelm your system and cause concurrency problems.

  If you have a mixed environment of workload or consolidates databases on Exadata so my opinion is IORM plans should certainly be implemented.