Installation of the Oracle 11 g database Vault

Similar Questions

• Installation of Oracle Apex 3.2 on the Oracle 10 g database steps

  Hello
  
  I'm new to apex oracle and oracle 10g Enterprise Edition installation. I had previously installed Oracle 10 g XE and Apex 3.2 in my rental unit.
  
  Now I need to install Oracle on oracle 10g Enterprise edition 3.2 apex
  
  I did the following steps:
  
  Step 1: I installed Oracle 10 g Enterprise edition
  
  Step 2: Install apex Oracle 3.2 on my Machine location with the steps again below
  1 > SQL > CONNECT SYS as SYSDBA
  2 > apexins SYSAUX SYSAUX TEMP is
  3 > @apxchpwd (changed the admin password)
  4 > @apxldimg.sql SYSTEM_DRIVE:\APEX32 (local system path)
  
  Step 3: What is the next step, please suggest me how to get the host name and port number I am little confused here also suggest me the above step I followed is correct or not?
  
  
  Earlier, when I installed oracle XE, I had the path of the local host as a shortcut to get. Here, I can't find that. Please suggest me how to get the URL to access the link to the apex
  
  I followed the same process, how he is mentioned in this link http://docs.oracle.com/cd/E14373_01/install.32/e13366/otn_install.htm#insertedID2
  
  Thank you
  Sudhir
  
  Published by: Sudhir_Meru on June 17, 2012 03:23

  Hello
  Download http://www.oracle.com/technetwork/developer-tools/apex-listener/downloads/index.html here ApexListener. The installation guide is on this page http://www.oracle.com/technetwork/developer-tools/apex-listener/documentation/index.html.

  Alternate, unzip the download and look toward the top of the Installation and the developer's Guide in doc folder. You have all the necessary steps. You can try the Standalone ApexListener initially. (Tip: search for the stand-alone word in the document).

  Make sure that you run the apex/owa/owainst.sql, because you're in 10g when connected in SYSDBA.

  Kind regards

• What do I need install Oracle Database 11 g 2 for the Oracle 10 g database migration?

  Hi all

  Would you be kind enough to help me with the following question!  I currently have Oracle Database 10 g on the old servers to my work and I want to install the GR 11, 2 on Windows Server 2008 R2 Enterprise Oracle database to new servers for upgrade.  I also forms, reports and Designer 10 g to maintain our existing applications.  So, I already looked in the Certification and found the following:

  Latest version of the product: latest version of the database server window weblogic

  Form Builder 11.1.2.0.0 11.2.0.4.0 7, 2008 R2, 2008 10.3.6.0.0

  Reports           11.1.2.0.0                                           11.2.0.4.0                                                 7, 2008 R2, 2008                                   10.3.6.0.0

  Designer 10.1.2.6.0 11.2.0.1.0 xp, vista, 7, 2003 (all 32 bit)

  For Designer, it is approved for a 32 - bit window, so I'm having trouble with the new requirement of system this window must be after 2003.  I want to take all of the availability and follow the Oracle certification (except that I will be given Designer because of compliance) as above.  I'm new with Oracle, and I don't know what comes with what to do it is complete.

  1. I'm going to install a database server (free 11.2.0.4.0 as described above) in a new server (2008 R2), then what I have to install the WebLogic Server with it?

  2. I'll install the generator of reports and Forms Builder (11.1.2.0.0) in another server (2008R2), so what I have to install WebLogic Server as well with her?

  3. what else do I need to install on this two server so that they work so that I can begin to migrate all existing data, forms and States more?

  Any advice would be greatly appreciated.  Thank you.

  Remember that this forum is targeted to the Oracle Forms product, for questions about the database can be better answered in one of the areas of database.  That being said, here are my comments:

  1 I'll install a database server (version 11.2.0.4.0 as described above) in a new server (2008 R2), then what I have to install the WebLogic Server with it?

  A database facility didn't need of WLS (which I am aware). Consider what you want is a typical design at three levels. Database - average level (applications server) - Client (tools and end user).   Each level has nothing to do with the other installation point of view assuming that they are not installed on the same computer. WLS is a middleware software (medium level). Be sure to check the product documentation before performing any installation. The 11.2 DB docs can be found here:

  http://docs.Oracle.com/CD/E11882_01/index.htm

  2. I will install Forms Builder and Report Builder (11.1.2.0.0) in another server (2008R2), so what I have to install WebLogic Server as well with it?

  Tools (Forms Builder, generator of reports, etc.) are not remote or web tools.  These must be installed on each developer's computer.  The installation of these tools does not require that WLS be installed first (on the developer's computer), but there is no need to be run unless the developer wants to apply locally for testing.  For a production deployment (multi-user), a similar concept will be used.  WLS will be installed first, followed by the forms and reports Services (runtime).  It will be on your remote server (medium level).  Software distribution you use will be exactly the same for the developer and the installation of intermediate level.  The difference will be in the options you choose during installation.  If you want to include manufacturers during installation, simply check the appropriate boxes when you are prompted.

  Also, if you plan to use the forms/States 11 GR 2, I recommend not using 11.1.2.0 and instead use 11.1.2.2, which is the latest version. F/R 11.1.2.2 installation requires that you first install WLS 10.3.6.  You should refer to the product documentation before beginning any installation. Specifically, carefully examine the product Setup Guide and Guide to the system requirements. The 11.1.2.2 doc library can be found here:

  • http://docs.Oracle.com/CD/E48391_01/index.htm

  3 what else do I need to install on this two server so that they work so that I can begin to migrate all the existing data, forms and States on?

  Looks like you've covered everything.  The granular details will be covered in the Installation and Guides to the system requirements.

  My recommendations:

  o ensure that each machine has at least 4gig of RAM

  o ensure that each machine has a static IP address before you start any part of the installation.  This can be done without a static IP address, but you must take additional steps (see Guide to Sys Req).

  o on machines where you plan to install WLS, make sure you have a 64 bit JDK installed first.  If you don't use a F/R 11.1.2.2, you must use Java 6.  However, if you decide to use 11.1.2.2, you can use Java 6 or 7.  Do not use Java 8 in all cases.

  When it comes to the designer, it must be installed on an old machine.  In General, I do not recommend to use it longer.  Although there is currently not a way to full migration out of it, you can use SQL Developer to manage the db objects that were created/used with it.  There are several MyOracleSupport documents that discuss the issue.  You can search the Knowledge Base of MOS to find or contact Support for more information.

• Installation of the Oracle Suite - Basic doubts

  Hi all
  
  Some fundamental doubts about the installation of the EBS.
  
  1. Why do we need to install a Unix - Cygwin or MKS Toolkit tools kit before installation of the EBS.
  
  2. Why do you have VC ++ 8.0 installed prior to installation of the EBS.
  
  3. which we need to install the loopback adapter in Windows2003. The steps presented in the thread link: Installation of Oracle E-Business Suite R12 on Windows 2003 does not call for installing loopback adapter,.
  Whereas it is shown as required in the case of Windows XP installation, wire link: Oracle E-Business Suite R12 steps for installing Windows XP
  
  Clarify pls.

  1. Why do we need to install a Unix - Cygwin or MKS Toolkit tools kit before installation of the EBS.

  2. Why do you have VC ++ 8.0 installed prior to installation of the EBS.

  For the reissue of the exactable application/database Oracle files links. These tools (cc, ld, ar... etc) are already installed under Linux/Unix, but not on Windows, that's why you need to install the software above.

  3. which we need to install the loopback adapter in Windows2003. The steps presented in the thread link: Installation of Oracle E-Business Suite R12 on Windows 2003 does not call for installing loopback adapter,.
  Whereas it is shown as required in the case of Windows XP installation, wire link: Oracle E-Business Suite R12 steps for installing Windows XP

  If your host is already connected to the network and an IP address, then card loopback is not necessary. Otherwise, you will need to set up the loopback adapter to have an IP address (for example, if you want to install Oracle apps on your computer/laptop at home that is not connected to a network).

• After the installation of the oracle, where need to change in my program

  Hello everyone.
  
  I want to upgrade the oracle 8i to 10g. I think I need to change somewhere in my program on SQL, PL/SQL and Pro * C, if I want the program can run without any problem.
  Can someone tell me where can I change my program.
  I want the list that needs to change SQL, PL/SQL and Pro * C.
  
  Thank you very much.

  Basic thing you need to do is to run a test environment when you upgrade your database to 10g and run the application against the same for whether something should be changed. If you get any errors with your tests, you don't need to change anything immediately.

  Of course, you can improve the design of your application by using the new features provided in 10g.

  And no one can give you a list of things that need to be changed because it is specific to your environment.

• installation of the oracle CC & B MDM utilities

  Hi friends,
  
  
  any body could help me how to install oracle CC & B and meter data management softwares.my question is should install us cc & B MDM in developer mechines and plane of web server and application at a time. How many servers is needed for this.
  
  
  
  Thanks and greetings
  Jean Jacques
  
  Published by: 788237 on August 13, 2010 03:42

  Have you checked the PERLLIB or $perl5lib system variable and it is defined on C:\Perl\lib?

• Activation of the network in the Oracle 11 g database Services?

  Is there a simpler way, how can activate network services on
  Oracle 11g express?
  concerning
  Gordan

  Hi Gordon,.

  great to hear that!
  Could you rent close this thread and mark any post useful or correct if your question is answered?

  Thank you

  Udo

• Get the error when you use the Oracle 9.2 on RRS 4 installation

  Hi all
  
  I was getting error while installing oracle 9.2.0.4 in Red hat advanced server 4
  
  YES was generating a message

   could not able to relink ins_sqlplus.mk  and ins_rdbms.mk

  but I'd ignored, after installation of the oracle s/w, I relinked bleow files
  
  I also tried running the command below
  

  [oracle@oracle lib]$ make -f ins_sqlplus.mk install
  
  but when i try to make ins_rdbms.mk i was getting a error
  
  [oracle@oracle lib]$ make -f ins_rdbms.mk install
  .
  .
  .
  .
  .
  ..
  .
  u01/app/oracle/product/9.2.0.1/db_1/lib32/libgeneric9.a   `cat /u01/app/oracle/product/9.2.0.1/db_1/lib32/sysliblist` -Wl,-rpath,/u01/app/oracle/product/9.2.0.1/db_1/lib:/lib:/usr/lib -lm    `cat /u01/app/oracle/product/9.2.0.1/db_1/lib32/sysliblist` -ldl -lm    -lvsn9
  /usr/bin/ld: crt1.o: No such file: No such file or directory
  collect2: ld returned 1 exit status
  make[1]: *** [/u01/app/oracle/product/9.2.0.1/db_1/rdbms/lib/extproc32] Error 1
  make[1]: Leaving directory `/u01/app/oracle/product/9.2.0.1/db_1/rdbms/lib'

  Please suggest me if this will have an impact on the DB
  
  Published by: user00726 on July 8, 2009 23:06

  If the error only occurs when you start the dbca Wizard, the database itself should be ok. Before using it for the production you can stress test your db using swingbench or hammerora to be sure that iti works well.

  Concerning

  Oliver

• Recover the Oracle Database 11 to the host of the new building installed

  Hello
  
  I want to test the recovery of an Oracle 11 database that has been saved with RMAN and "controlfile autobackup on."
  The RMAN Repository is in the controlfiles (no catalog database has been used).
  
  I have a complete backup of the database, the archvies since the last backup and the redologs - the old database until online where the
  database 'crashed' :-)
  (to tell you the truth: I have backup ups sqlnet.ora, listener.ora.) And backups of PWDmpausch.ora and SPFILEMPAUSCH. ORA. But I think that
  It should be possible to recover the database without this file)
  
  On a new installed host, I did a bog Oracle 11 Standard Edition only software installation standard.
  Operating system is Windows XP SP2
  (D:\oracle\ora11) ORACLE_HOME and ORACLE_BASE (d:\oracle) are the same as on the old system.
  
  After the installation of the Oracle software, I have none of the configurations. (No tnsnames.ora, listener.ora no).
  There is only a default sqlnet.ora in %ORACLE_HOME%\network\admin with a single entry: SQLNET. AUTHENTICATION_SERVICES = (NTS)
  
  In documentation, I found that I read "startup nomount" database with a minimum setting or basis file.
  I tried to use the default init.ora in % ORACLE_HOME%\dbs\init.ora. (I just changed the "ORCL" db_name to 'mpausch')
  The steps I did:
  define the ORACLE_BASE = d:\oracle
  set ORACLE_HOME = d:\oracle\ora11
  Set ORACLE_SID = mpausch
  sqlplus/nolog
  SQL > startup nomount pfile=d:\oracle\ora11\dbs\init.ora
  
  But the only thing I get is a: ORA-12560: TNS:protocol adapter error
  And
  SQL > connect / as sysdba
  also, does not produce an ORA-12560.
  
  
  So, I configured an earpiece and a local name (with Net Configuration Assistant). But only the error message I get
  is it ORA-12560.
  
  What do I need to configure to be able to start the instance with the minimum setting file?
  
  Kind regards.
  
  mpausch

  Make sure that you create the Windows Oracle service with oradim.

• How to migrate the Oracle database to the MySql server

  Hello
  
  I'm on a project that include databases oracle to MySql database migration, also include data warehouse servers.
  Please help me, what is the procedure to migrate the oracle to MySql database database, which takes relatively to the objects of care.
  If any link help me, please let me know.

  Hello
  This forum is for assistance to the migration of non-Oracle to Oracle databases. If you need assistance in migrating from Oracle to MySQL contact MySQL. You can try the forum MYSQL here-

  http://forums.MySQL.com/

  Kind regards
  Mike

• Client Oracle is a test for the creation of SP database?

  I have the Oracle 10 g client in my machine. Is there a database of test I can connect to and create stored procedures?
  If not, is it possible to create a local database?
  And what about the Oracle Express customer? It come with a test database? Or do I need to install the database in my system for the creation of SP?

  901007 wrote:
  I have the Oracle 10 g client in my machine. Is there a database of test I can connect to and create stored procedures?
  If not, is it possible to create a local database?
  And what about the Oracle Express customer? It come with a test database? Or do I need to install the database in my system for the creation of SP?

  N ° you must install the version of the oracle for this database server.

• Relocation of the oracle database to a new server with upgrade oracle software

  Hi guys,.
  
  Here's the scenario, we have an existing demo Oracle 9.2 database on Solaris 5.9 server. Asked me this transfer to another server with the same OS but with installed Oracle 10g software. The original plan was to mount the exisiting Oracle home of the original server to the new server and copy there all the databases files and set up the database.
  
  Here are the steps:
  -Issue a statement "controlfile alter trace database backup", download the script of the trace file
  -Copy all database files to the new server
  -Change the settings files
  -Make a startup mount recreate control files, data recovery and startup of the database on the new server.
  
  I suggested that we to a tablespace of transport but cause limited resources and that the 9.2 database doesn't have this feature, we cannot carry out this process. Also, I can't make an exp/imp of the database as we really have little resources on a disc. I was wondering if the steps I listed above are correct? Or would result in an error?

  799727 wrote:
  Is it possible not to move the files from the mounted disk and treat it as it is and then upgrade the Oracle 9.2 database to Oracle 10.2?

  Yes you can request the 9.2-10.2 online upgrade, see upgrade guide
  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14238/upgrade.htm#BABJADGA
  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14238/preup.htm#i1007814

• Target of hyperlink connects since the Outlook file in the Oracle database mail

  Greetings.
  Lack of permissions, I can't create text file on the UNIX server.
  This will not be changed.
  I saved the file in the Oracle 11 g database.
  
  I want to send e-mail to PL/SQL with attached file.
  No UNIX don't scripts at all.
  
  It's a big file.
  Thought has crossed my mind.
  
  Can I send e-mail to PL/SQL with a hyperlink that connects to the file that is stored in the Oracle database?
  The target of the link is a file stored in the Oracle database.
  
  Did anyone done this before?
  
  Let me know your ideas.
  
  Thank you.

  Freq Oracle wrote:

  I want to send e-mail to PL/SQL with attached file.
  No UNIX don't scripts at all.

  Can be done using UTL_SMTP or more recent UTL_MAIL.

  Attachments to emails are just that - the content of the file is attached to the body of the mail. Mail arrives at its destination, the mail reader recognizes the attachment and allows it to be saved to disk (or open/read).

  It's standard stuff... See MIME for more details on how to build a body of message with attachments.

  Can I send e-mail to PL/SQL with a hyperlink that connects to the file that is stored in the Oracle database?
  The target of the link is a file stored in the Oracle database.

  Yes. You need a web server that has been configured with Oracle "+ access +"-the default is using the Apache Oracle server which includes a module called mod_plsql. This module allows the web browser to use a URL that refers to a procedure from PL/SQL web enabled in a specific database schema - and pass parameters (as part of the URL query string) to the proceedings.

  You can also use Oracle EPG (Extended procedure gateway according to me, is what does the acronym). This provides a web server directly within the Oracle instance using Oracle XDB (integrated database of XML). It also has a module of type mod_plsql which provides that a web interface (via http) enabled PL/SQL procedures.

  This procedure can be a procedure "+ document download. Oracle provides a system procedure called WPG_DOCLOAD.download_file ()+ you can use inside this active web PL/SQL procedure. This will return the contents of the blob/clob as a 'file' in the web browser.

  For example, a download web-enabled simplistic procedure will look something like this:

  create or replace procedure downloadFile( fileName varchar2 ) is
          b       blob;
          mimeType varchar2(50);
  begin
          select
              file_content, mime_type  into b, mimeType
          from my_documents where file_name = fileName;
  
          OWA_UTIL.mime_header( mimeType, false );
          HTP.p('Content-Length: ' || DBMS_LOB.getlength(b));
          OWA_UTIL.http_header_close;
          WPG_DOCLOAD.download_file( b );
  end;
  

  The URL will look like this:

  http://my-webserver.my-domain.com:7777/pls/ora/scott.downloadfile?filename=somefile.doc
  

  where:
  Scott.DownloadFile = name of the PL/SQL procedure
  filename = somefile.doc = name values of the parameter to pass to the procedure

• Installation and migration Oracle 10 g x 86 to x 64 under SUSE 11 x 64

  Hi all

  I'm trying to accomplish a proof-of-concept for the migration of legacy x 86 environment running Oracle 10 g in x 64 environment, then upgrade the instance of Oracle 11 g. The first step in doing this is installation of Oracle 10 g in the target environment, which is SLES 11 SP2.

  I went though the standard installation procedure; from what I can discern, I installed all dependent packages, including orarun to prepare the environment. I have a source installation package after some minor headaches (unfortunate that Oracle offers them more, because I'm sure there are others out there pertaining to similar projects) and began the process of installation as the oracle user.

  To install, I chose to keep things as simple as possible and went with all the default Oracle settings, although I chose to not create a starter database. The only difference is that I have in the House/storage of database mapped via iSCSI to/opt/oracle/product /. After editing, I was sure to change the property of oracle: oinstall.

  The first phase of the installation runs without problem. I made the necessary changes to the system so that Setup happily buzzes through the prerequisites and ends the first phase of the installation. However, during the phase of liaison, I meet an error:

  «Error in invoking target 'client_sharedlib' of makefile ' / opt/oracle/product/10gR2/db/network/lib/ins_net_client.mk'.» See < journal > for more details".

  In this paper, I am directed to examine the Journal brand, as in

  "INFO: the output of this operation is also available to: ' / opt/oracle/product/10gR2/db/install/make.log'.

  Very well. So, here is the relevant excerpt from that:

  32-bit version of nnfgt.o building

  / bin/sh: line 2: / opt/oracle/product/10 g 2/db/bin/gennfgt: permission denied

  r /opt/oracle/product/10gR2/db/lib32/nnfgt.o

  / bin/sh: line 8: / opt/oracle/product/10 g 2/db/bin/gennfgt: permission denied

  64-bit version of nnfgt.o building

  r /opt/oracle/product/10gR2/db/lib/nnfgt.o

  (if ["compilation" = "assemble"]; then------)

  / opt/oracle/product/10 g 2/DB/bin/gennfgt > nnfgt.s

  / usr/bin/As o nnfgt.o nnfgt.s

  RM-f /opt/oracle/product/10gR2/db/lib/nnfgt.o

  MV nnfgt.o/opt/oracle/product/10 g 2/db/lib /.

  / usr/bin/AR rv /opt/oracle/product/10gR2/db/lib/libn10.a /opt/oracle/product/10gR2/db/lib/nnfgt.o; FI)

  (if ['compile' = "oratmp"]; then------)

  / opt/oracle/product/10 g 2/DB/bin/gennfgt > nnfgt.c

  / lib/idcpp nnfgt.c oratmp.c

  -i oratmp.c o oratmp.s f nnfgt.c

  / usr/bin/As o nnfgt.o oratmp.s

  RM-f oratmp.c oratmp.s

  RM-f /opt/oracle/product/10gR2/db/lib/nnfgt.o

  MV nnfgt.o/opt/oracle/product/10 g 2/db/lib /.

  / usr/bin/AR rv /opt/oracle/product/10gR2/db/lib/libn10.a /opt/oracle/product/10gR2/db/lib/nnfgt.o; FI)

  (if ['compile' = "binary"]; then------)

  / opt/oracle/product/10 g 2/DB/bin/gennfgt > nnfgt.c

  TARGET_BINARY_INTERFACE =

  export TARGET_BINARY_INTERFACE

  GCC - c nnfgt.c.

  -f /opt/oracle/product/10gR2/db/lib/nnfgt.o rm

  MV - nnfgt.o/opt/oracle/product/10 g 2/db/lib /.

  / usr/bin/AR rv /opt/oracle/product/10gR2/db/lib/libn10.a /opt/oracle/product/10gR2/db/lib/nnfgt.o; DIK

  / usr/bin/make-f ins_net_client.mk client_sharedlib ORACLE_HOME = / opt/oracle/product/10 g 2/db / / opt/oracle/product/10 g 2/db/bin/genclntsh

  make: execvp: / opt/oracle/product/10 g 2/db/bin/genclntsh: permission denied

  make: * [client_sharedlib] error 127

  I don't know what to do with these permissions problems:

  ls - al/opt/oracle/product/10 g 2/db/bin/gennfgt

  -rwxr-xr-x 1 oracle oinstall 2983 20 October 2005/opt/oracle/product/10 g 2/db/bin/gennfgt

  Additional information, as I thought the ORACLE_HOME in the output was weird (concatenated?):

  echo $ORACLE_HOME

  / opt/oracle/product/10 g 2/DB

  This who might I be missing here? Any help is greatly appreciated, let me know if there is anything I can provide additional details.

  See you soon,.

  Greg

  Another thing, you might check are property of oracle on all directories in/opt/oracle/product/10 g 2/db and the correct permissions. Also, what is your output of the command 'mount '?

• Installation of the repository creation utility

  Hello
  
  I downloaded BIPublisher_11.1.1.3_Desktop and you want to install it on my machine (windows 32-bit).
  
  in the tutorial, it's sad that I have before installing BI Publisher to run the scripts of the utility of creating repository (RCU) in the Oracle 11 g database.
  
  I have an Oracle 11 g XE installed on my machine in C:\oraclexe, and it is started.
  
  I downloaded the ofm_rcu_win32_11.1.1.3.3_disk1_1of1 package and started it.
  
  I have a problem on a step 2 - connection to the base. I get an error - invalid service name.
  
  Where can I get the name of the Service, please!

  Try XE service name

  Generally, it is a database name. It was supposed to be specified during the installation of the database.
  If it has not been changed, it should be set in your case.