Installation of Vista on the new disk HARD of DVDs of resettlement

Similar Questions

• Installation of Vista on the new hard drive was interrupted, and now I can not start the computer

  So I decided that I need a bigger hard drive. I got a 500 GB hard drive, so I have it PLOPPED in my Acer Aspire 5517 with my vista boot drive, turned on and began to go through the process. Once he got to the phase 'installation complete' it seems to take a while, so I let it run all night. Once I got up, it was on a black screen with the mouse, I let stand a few more minutes but still nothing. I turned off and started it expects to find to return at the beginning of the installation, but instead he began to start from what is on the hard drive at this time. It got to the screen with the loading bar and the sign 'Microsoft Corporation'. The loading bar was very frigidity and stopped and started randomly. I let it do this while I went to school, but when I got home, it was always the same loading screen. I rebooted and tried to start in safe mode, but when I do it it stops at crcdisk.sys, and never forwarded charges. I tried to do the reset thing factory start it but that doesn't seem to work. My other puny hard drive still works, but the other does not. I searched the internet but have not seen any other problem like it. I want to just start completely clean of my new 500 GB. Please help!

  Hi James,

  1. What is the number of brand and model of the hard disk of 500 GB?

  2. How did the 500 GB hard drive connected to the computer? It is external or internal?

  To troubleshoot the unable to start the issue to cause corrupted driver, some files that can not be loaded during the startup process must be fixed or restored. So, let's check the disk by using the Windows Recovery Console.

  (a) put the Windows Vista installation disc in the disc drive, and then start the computer.

  (b) press a key when the message "Press any key to boot from CD or DVD ".

  (c) select a language, a time, a currency and a keyboard or another input method, and then click Next.

  (d) click on repair your computer.

  (e) (click on the operating system you want to repair), and then click Next.

  (f) in the System Recovery Options dialog box, click command prompt. Type chkdsk c:/f to try to correct the errors.

  (g) Note: answer them when chkdsk asks you if you want to check the disk next boot Vista

  (h) after the recording of the disc, and then run sfc/scannow to check the corruption of system files.

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  Check out TechNet help links and check if that helps:

  The computer starts stops at crcdisk.sys

  Help! Vista won't start... (crcdisk.sys)

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Installation of Vista on the new hard drive.

  Recently, the hard drive (Seagate Barracuda 7200.11 750Go) in my HP Pavilion Elite M9350F Desktop has failed.

  I replaced today by a Western Digital Caviar Green WD10EADX 1 TB harddrive.

  After the removal of the old hard drive and the installation of the new, I tried to install Windows vista on it.

  While in the window select a driver to install, I get this message

  "A required CD/DVD drive device driver is missing. If you have a driver floppy, CD, DVD, or USB Flash Drive please insert it now. »

  Followed by this error message when I perform a new crawl for drivers.

  "No device drivers were found. Make sure that the installation media contains the correct drivers, and then click OK. »

  I don't know what to do to fix this error.

  I also ran a report diaognostics and the disk is healthy, but I get error BIOHD-3.

  * Note: I've already been on the Western Digital site and they describe it as either an error with the computer itself, or the hard drive has failed, which I do not have to be the case since I bought it today.

  Two SATA drivers I posted above (from your page drivers)-choose which is right for your installation. One is for Vista 32 bit, the other is for Vista 64-bit. Use something like the free 7Zip to extract the files to a folder. Place the files on a flash drive and when the message arrives you need the driver cd/dvd insert the flash drive.

  I didn't need or used this procedure personally, but it seemed to work for others.

• Vista activated on the old hard drive hard disk failed to load to the new disk hard wont let me enable

  Vista activated on the old hard drive, failed loaded hard drive vista Ultimate edition on the new hard drive, but do not let me activate. This is a saved copy and use the product from the back of the disc that contains key

  Hi Tony,.

  I imagine the inconvenience that you have experienced, but don't worry, we are here to help solve the problem and guide you in the right direction.

  You can go through the steps in the link activate Windows Vista by phone activation.

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help you.

• Windows Vista install the new WD hard drive empty - does not not :(

  It was my original question: http://h30434.www3.hp.com/t5/Desktop-Hardware/HP-Pavillion-a6645f-No-hard-drive-detected-BIOHD-2-err...

  And now...

  I got my CD of HP recovery and ordered a new WD 500 GB HDD... same features as the seagate who pooped me and I can't get windows install on the new HD

  No matter what I do, computer wants to open the Recovery Manager and according to the available procedure does not work.  It works me in circles asking for #1 drive, then the drive recovery supplement and back with no progress.

  What I have to do is use this form: http://vistahomepremium.windowsreinstall.com/installnewhdd/installnewhdd.htm but only the Recovery manager opens when I boot from the CD.

  Anyone have any ideas?

  If I followed your questions correctly... you had a BIOHD-2 error, ordered HP recovery discs, replaced the hard drive and tried to restore your system with no luck. Is that a correct assessment of the situation?

  OK, you need to make a Windows Vista install screen... not who's going to go with your HP recovery CD/DVD. The disks do not contain the Windows installation routine, only the HP Recovery Manager. These discs contain more or less, an image of the HP installed OS and software, plus some drivers and applications. To the best of my knowledge, you should have three DVDs (1 of 3, 2 of 3 and 3/3) more an additional drive. You should boot from CD 1 of 3... Then, when asked to insert the 2/3... Then, when asked to insert 3/3. And finally if/when necessary additional drive.

  At HP; Recover the system after the hard drive is replaced (Windows Vista)

  Frank

• Windows installation disc needs for a new disk hard but is not available

  Hello

  The hard drive on my PC HP badly shot - he tells me I need to check for consistency, but it cannot and will not run chkdsk on a restart and will not let me create a restore disk.

  OK, I accept that I need to buy a new hard drive but I have no CD to install Win 7. The pc has a partition called "factory secctings" but it will not create a cd of Windows or a restore cd or a Sun.

  Microsoft has said that it is not available for me because my serial number includes the letters OEM. I had a case created at HP, and a person called me and said I should get the CD of the os from Microsoft, or from the store I bought from (Staples). Staples said they have no CD for Win 7 and cannot make me a. They said get them from Microsoft or HP.

  The number of cases is 3016271460

  See that I get nothing from Microsoft, HP, or Stqples. I never got a CD with the pc because, I guess, it's there on the partition to factory settings, but with the failure of hard drive I can't use it.

  All have a suggestion?

  Your hard drive can hold the DEFECTIVE SECTORS.

  The only way to get windows 7 disc is to buy a new Amazon / similar online stores / service centres.

  You can try this:

  ""http://www.sevenforums.com/installation-setup/151566-reinstalling-windows-7-a.html#post1300819 " "

  Browse the site and do the steps as shown.

• After the new installed hard drive, DVD player, not to recognize any media

  given that I had a new hard drive installed my dvd will not play any type of media, or play any DVD including those that I burned to a disc, since the new drive has been installed. I tried to download the drivers and utilities, I got with my comp. but like I said it will not read. I even tried to download dell canada drives, but still no help. also, my webcam does not work as well and again tried to download from disk but no luck.

  Hello

  ·         What happens when you insert the CD into the CD/DVD drive?

  ·         Do you have an error message when you try to play the CD?

  I suggest you try to fix this problem automatically by clicking on Fix It in the steps below:

  Step 1:

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  Step 2:

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Step 3:
  Your CD or DVD drive cannot read or write media - Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  If the issue still exists post returns with the information requested in questions.

• After installing the new disk hard Windows XP tells me that I have to reactivate.

  original title: problem after the activation of the product
  I put a new hard drive in my computer and activated with microsoft. When I restarted my computer, I get a window saying I need to activate my copy. If I click No, it restarts the computer, if I close Yes it says it is already activated and when I click ok it reboots the computer

  I put a new hard drive in my computer and activated with microsoft. When I restarted my computer, I get a window saying I need to activate my copy. If I click No, it restarts the computer, if I close Yes it says it is already activated and when I click ok it reboots the computer

  Start in safe mode, install SP2, SP3 install.

  Reboot in normal mode, it should work. I think that it maybe an old cd rather than the last version supplied with certificate of authenticity.

  Cheers (mine works now)

  TDI

• My Hard Drive crashed and I have no disk Vista to install vista on the new driver

  If my hard drive internal on my desktop Hp pavilion fried. After getting a new, comfortable, I now need to install vista. When I originally bought the computer the drive didn't come with it, when I asked if I could have, they said to call the guy, and if I have my product key I will be ok... problem is, a. it seems that questions of others who is not a solution, (b) I can't find a number to call and responds properly to my problems , and c. microsoft don't stop trying to charge me, something that I want is unfair if I already paid for the product.

  so because my hard drive is done I can't recover vista off the old drive hard as other answers suggest that I try to do

  No solution, I'd love to hear, thank you

  All support for your computer comes from the manufacturer of your computer, not Microsoft.

  How to get Vista recovery Media.

  There is no Vista free download legal available.

  http://h10025.www1.HP.com/ewfrf/wc/contacthp?LC=en&DLC=en&cc=au

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• never had a disc of windows vista with the new laptop and no option to make a recovery disk, and I need to format my laptop to factory / clean, help!

  never had a disc of windows vista with the new laptop and no option to make a recovery disk, and I need to format my laptop to factory / clean, help!

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• I installed a hard drive 500 secondary gig, after re-booting the properties for the new drive hard only show 48.8 GB are available.

  I installed a hard drive 500 secondary gig, after re-booting the properties for the new drive hard only show 48.8 GB are available. where is the rest of the memory?  Its not partitioned to another eather drive

  original title: hard drive problems

  (1) what does your BIOS the drive size?

  ============================================================

  2) disk hard test - find your make and model:
  Speccy - computer/system information in detail
  (More detailed look at your memory and CPU)
  OS, CPU, RAM, card, graphics, hard drive, optical drive
  Audio, peripherals, network.
  Note: Option RAM indicates number of slots, DRAM Timing.
  Works your memory speed (frequency). The nominal frequency of your memory.
  http://www.Piriform.com/Speccy

  Test your player - CD Bootable:
  Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective. Test your drive with the factory utility. If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools (bootable CD) and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  ================================================================

  (3) HD Tune:
  Provides information of the car and has an option (tab scan error) to test your drive.
  http://www.hdtune.com/

  SpeedFan:
  Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.
  It displays your drives model number and compares your drive with other discs of the same brand and model.
  http://www.almico.com/SpeedFan.php

  -Partition management utilities-

  Partition Wizard Home Edition:
  http://www.partitionwizard.com/free-partition-manager.html
  Note: There is also a CD bootable or versions of the bootable Flash drive:
  CD: http://www.partitionwizard.com/partition-wizard-bootable-cd.html
  Flash player: http://www.partitionwizard.com/bootable-flash-drive.html
  Among the features and functions: create partition, Delete partition, format partition,.
  A partition resize, move partitions, Partition recovery after an accidental deletion,
  Convert the partition, partition Explore, Hide partition,
  Change the drive letter, a partition active Set, Explorer (content display) of the partition.
  Note: To complete any task use the "Pending Operations" box at the bottom left.

  Alternative to Partition Wizard (a bit easier to use, but Partition Wizard and EASUS have almost identical user interfaces)
  EASEUS Partition Master Home Edition (free):
  http://www.partition-tool.com/
  Partition software ALL-IN-ONE and the most convenient hard disk partition manager Kit
  Includes Partition Manager, Disk & Partition copy Wizard and Partition MBR and GUID partition GPT disk recovery Wizard (table) on Windows 2000, XP, Vista, Windows 7 and Windows Server 2000/2003/2008 (32-bit and 64-bit).
  It allows users to resize/move Partition, drive system extend, copy Disk & Partition, Partition merge, Split Partition, redistribute free space, convert dynamic disk, Partition Recovery and much more.

  J W Stuart: http://www.pagestart.com

• Time Machine the new disk transfer has not moved all the time

  I have a Time Machine backup to an external drive. It works very well. However, he was beginning to run out of space, so I bought a new, bigger HD.

  I followed all the steps of Time Machine: how to transfer backups from a current backup disk to a new backup drive - Apple Support.

  I then waited 12 hours for that copy.

  Around midnight, I noticed the copy is complete. There was a message that iWork had not been copied because he needed a different operating system. But I rejected. There are no other messages.

  I changed the Time Machine preferences on the new disk. And fell asleep.

  This morning, I walked into a Time Machine.

  Only the first date from July 2014, was on the new disc of TM. Then there was five times after midnight when the new drive was saved.

  But there is nothing in any of the years between the first date and after midnight.

  I know that there are hundreds of TM captures on the original disc. And I've used them very well.

  I tried to copy individual files from the old drive to TM to the new, but it is not possible to "change the backups."

  10.10.5 system

  What should do?

  While in Time Machine, to see all the volumes mounted shift - command - c.    Information derived from Linc Davis.

  If this does not work, try to copy the file to disk/restore utility using to copy the backup to a new location. Please note that this will reformat the destination partition.

• Disk GUID partition? and the new disk utility

  The new disk utility Version 15.0 delivered with El Capitan, differs from earlier versions of disk utility.

  Most will have noticed the absence of the utility to fix permissions.

  However, check the type of disc format is a little more difficult and well.

  The player must be selected, and then the information button must be selected.

  Then, you must look at the "File System" line to see whether or not it is OS X Extended.

  Then you look at the line "Logged" to see if it is 'yes' or a 'no '.

  How do we know if it's a GUID partition or a utility with the new APM partition?

  Sorry to contradict you, but general information about the disks are always where they used to be

  

• The progress of the installation is blocked on 'the new device is connected now' bar is just reload!

  The progress of the installation is blocked on 'the new device is connected now' bar is just reload! HP laserjet M1132 MFP

  Welcome @HELPMEPLSHSLOL,

  Thank you for your participation in the forums! I see that you are getting the error "new device is now connected" when you try to install the printer software. I'd love to help you.

  If you are using Windows and you're using a USB connection, try the steps in this document: HP Laserjet products - "Device setup has not completed" or the "Unknown device" Message appears in Windows during Installation of USB. If the printer will not be updated of the Manager of devices in the two Solution, make a right click and uninstall the print device. It may be listed as unknown device, USB or Laserjet M1132 print media. Disconnect, then reconnect the USB cable to see if it will continue the installation. If it is not that whatever it is listed for your printer, try another USB port directly on the computer or another USB cable.

  What operating system do you use? How to find the Windows Edition and the Version on your computer.

  How is the printer connected?

  Feel free to click on the 'accept as Solution' and the 'Thumbs Up' If this helped. Please let me know the results. Best regards

• Tech installed the new drive hard yest. I had McAfee virus exp 31/10/13. Today a msg says: "Windows did not find antivirus software on this computer. What should I do?

  Tech installed the new drive hard yest. I had McAfee virus exp 31/10/13.  Today a mesg says: "Windows did not find antivirus software on this computer.

  What should do?

  Download another copy of McAfee and activate it with your existing license.

  Ask for advice here: http://service.mcafee.com/Default.aspx