Installation of W8 with WVista.

Similar Questions

• Link new installation of thunderbird with the old profile.

  I created a new profile and stored on an external drive, there is a certain messages, I just had to reinstall win7 and do not know how to link a new installation of thunderbird with my old profile. Seems fair to get a host of issues that do nothing.

  Look at https://support.mozilla.org/en-US/kb/profiles-tb#w_how-to-find-your-profile and then go to the directory corresponding to your external drive to find your old * *.default file.
  Copy your old profile to the directory where your current profile is stored.
  See https://support.mozilla.org/en-US/kb/using-multiple-profiles to switch to your old GOLD "profiles.ini" edit profile to change the 'path' in the name of your old profile.
  Restart Thunderbird.

• R12 post-installation checks fail with RW-50015 for HTTP, help, virtual directory, JSP Page and Login Page

  Hello

  I try to install EBS R12 for three weeks with the same result (after five fail post-installation verification).

  I tried to install Oracle Linux 5.8 32 bit and Oracle Linux 5.8 64-bit but end result is the same. When I installed Linux oral, I chose all the option packages. I also used the latest version of RapidWiz as suggested by some posts on the forum (and also in response to my other post by Hussein).

  Each installation attempt failed with the following text:

  (x) HTTP                                      (x) Help Page

  Virtual directory (x) (x), JSP

  Login page (x)

  It failed with "RW-50015: error".

  =========

  HTTP

  ====

  check the URL = http://prod.ebs1.com:8000

  RW-50015: error:-HTTP listener does not. The service may not be started on the port again. Please check the service and use the button try again.

  ==========

  Help page

  =========

  check the URL = http://prod.ebs1.com:8000/OA_HTML/help

  RW-50015: error:-Help Page does not. The service may not be started on the port again. Please check the service and use the button try again.

  ========

  Virtual directory

  =================

  RW-50015: error:-Http virtual directory server is not responding. The service may not be started on the port again. Please check the service and use the button try again.

  ==============

  JSP

  ===

  check the URL = http://prod.ebs1.com:8000/OA_HTML/jtfTestCookie.jsp

  RW-50015: error:-JSP does not. The service may not be started on the port again. Please check the service and use the button try again.

  ==============

  Login page

  ==========

  RW-50015: error:-Login Page does not. The service may not be started on the port again. Please check the service and use the button try again.

  ==============

  I did find a lot of information to solve this problem.

  Help, please!

  Best regards

  Well, I must fix it in next (trying to start Apache (adapcctl.sh) casts a ' error while loading Shared Libraries: libdb.so.2' on RedHat Linux 5 (Doc ID 879522.1)).

  Once you run the commands in the MOS Doc, stop and start the services than those mentioned above and it should seem so

  Thank you

  Hussein

• Dear Sir, I am facing problems with my creative packeger office, I chose to deploy IT, PS and Adobe Dc Pro on some of our clients, but installation is arrived with only HE and PS. What is the problem? Thank you

  Dear Sir, I am facing problems with my creative packeger office, I chose to deploy IT, PS and Adobe Dc Pro on some of our clients, but installation is arrived with only HE and PS. What is the problem? Thank you

  Hello

  Acrobat is what we call an 'exception' and needs a slightly different steps to install.

  The following document gives details on the deployment of both DC and XI of Acrobat since a CCP package versions.

  Using creative cloud | Deployment of Adobe Acrobat

• Recovery disk Tecra M2 installs but happens with incomplete installation

  Tecra M2 worked fine, it's a good little machine without running out of space.
  I tried to install a new drive HARD 160 GB (Seagate) was 60 GB (Hitachi).
  I used the recovery on the new HARD drive disk, it formats the drive sets up XP Professional, gets that me recorded by Microsoft OK, but when the laptop wants to run Windows it bombards gives me a blue screen ('dumping' memory etc.).
  When the laptop reboots, in "Safe Mode" message pops up that the 'Installation was incomplete. Re-install Setup.
  First question: -.
  Is it possible to 'fix' the installation with the recovery disk?
  Another disk of Windows XP CD - seems unable to repair the installation.

  Then
  Second question: -.
  I tried to do a complete reinstallation from scratch, with the Windows CD - no problem. But then I need to install the drivers - got the support of Toshiba OK and I see the recovery disc has a whole bunch of the 'fix' but the June 10, 2006 forum thread "necessary driver after installation of Windows on TecraM2, gives the order of installation: no problem except that I cannot locate"Microsoft Windows XP Professional Step by Step Interactive"anywhere - I looked everywhere for it?

  Hi Ollienz,

  I'm a little confused about your Mr. ad you want to install Windows from Toshiba Recovery disk or normal drive of Microsoft? What do you do now?

  Theoretically, the recovery disk might be scratched so that installation can t be completed so successfully in your case, I would like to try a Microsoft Windows XP disk.

  I did a Google search for this Microsoft Windows XP Professional Step by Step Interactive and I found it s an update of safety for interactive training but it doesn t seem to be important for the driver installation:
  http://support.Microsoft.com/kb/898458

• Installation of XP with partitions

  I have a Satellite M30 and you want to install Windows XP with partitions. I did before recovery, which is easy - but since it seems that the installation of Windows on this Toshiba laptop is different to other computers my friend told me that he couldn't help me.
  What are the steps for installation with partitions?
  All of the pitfalls that I should worry about?

  After purchasing the laptop I've never seen the CD-Rom in Windows XP home. I have it lose or do I just get the restore CD?

  Thanks for the help
  Daniel

  Hi Daniel

  Please see this topic

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=2513

  I hope it can help you.

  Good luck!

• Correction of installation Photosmart Wireless with SSID of SigmaplusEOL1 problem

  Hey,.

  I have a Photosmart C4780. I have set up for a little wireless printing back and it worked fine. Recently, I had to reset my router for other reasons, which forced me to set up my printer wireless again.  But I can't too. First of all, I used the Setup Assistant that has been installed on the iMac when I previously installed it.  That did not work.  Then, I just uninstalled and tried to reinstall it back. I tried to implement wireless first. When defective, I tried to set up via USB, and then wireless, which still did not work. The problem I meet is during installation in the Setup Wizard, I get 'Select unit.' My printer is connected via USB, and it appears on the list of devices. I click on "Continue" and the following window is an option that says "Set up your device for a wireless network." I check the box and click "continue." The next window is 'Select Network'. And here the problem comes in. A message appears that says "Device not connected", even if it is clearly. I even tried not to connect the printer via USB until it says "Select Device." But I get the same result. Also, when I click 'OK' to the message, window "Select network" not said no "Wi - Fi network discovered."  I can't do anything on this subject. I tried to reset the settings of the printer, and the printer for 15 seconds unpluggin wireless to reset the printer as a whole. Still having the same problem.  Any help would be greatly appreciated. Thank you in advance.

  Printer: HP Photosmart C4780 computer: iMac late 2009 OS: OS X Lion mountain 10.8.2 router: Netgear WGR614v7

  I finally thought to it! (Sorry I'm answering my own posts btw, but I want to put the solution for someone else with the problem of SigmaplusEOL1). If you have the SigmaplusEOL1 as your SSID when you print the "wireless network Test report", you have NO need to come back (I know it's a hassle for people).  To resolve this issue, follow these steps.

  (1) disconnect your printer.

  2) go to your router's IP address (such as 192.168.1.1 or whatever it is for your router).

  (3) replace the SSID of your wireless network with "SigmaplusEOL1".

  (4) for the security option for your wireless network select None (of the sort that a password is not required to access your wireless network).

  (5) Please turn your printer back and reprint "The wireless network Test report". It should say «No problem found...» »

  (6) the report shall also give an IP address of the printer (under Configuration Summary below). Type this address into your browser to go to the printer setup page.

  7) click on the 'Network' tab at the top.

  (8) under the heading "Connections" in the left pane, click "Wireless (802.11).

  9) click on "Start the Assistant" at the bottom right.

  (10) in the wizard, edit (the SSID and encryption wep or wpsk) password that you want your network to be wireless. So probably everything what he started as before you changed the SSID to SigmaplusEOL1

  11) click on 'Finish' at the end. The page will probably try to keep loading but it won't because you have changed the network settings on the printer. Just ignore that

  (12) back to the IP address of your router and change the SSID and the encryption password for everything what you change printer SSID and password.

  (13) reprint of the wireless network Test report. Admittedly, the SSID is the same as your wireless network, and everything is good.

  That's all. You should be good to go now.

• driver installation problem 9171 with LV 8.5.1 and NIDAQ9.3

  Hello
  I just bought a NI9171 with a NI9477 DO Board chassis after checking the compatibility (driver, version LV). Everything seems to be ok, but I can't seem to get the right driver installed in NIDAQ 9.3. I tried with NIDAQ 9.4. Here, the driver has been installed correctly and I have done some tests in MAX, but my DAQmx LabVIEW library has been completely eliminated during the installation of 9.4... Re-intsllation of NIDAQ9.3 brought down the DAQmx library, but the driver no longer works. A thought is to copy the library addition and reinstall 9.4... but when it worked, it is not the right way to solve the problem. Could someone tell me if there is a problem with the Readme of 9.3 or suggest a solution to this problem? Unfortunately I have no shared services provider more and can not get direct support by OR ;-(
  Here you can find the Readme file:
  http://download.NI.com/support/softlib//multifunction_daq/nidaqmx/9.3.0/Readme.html#OS

  Thank you for any suspicion!
  Olli

  Hi Olli,

  Sorry for the inconvenience, but DAQmx 9.3 does not support 9171. There is mistake in our documentation. First, it was submitted to 9.4. However I have a solution for you. It is to install DAQmx components 9.4/9.5's to kernel with support for LabVIEW 9.3 DAQmx:

  (1) uninstall all versions of DAQmx

  (2) install DAQmx full 9.3 and restart

  (3) run the installer DAQmx 9.4/9.5

  a. Select custom, then click Next

  

  b. "Application Development Support", select "do not install this feature.

  

  c. click on through the next few menus until you reach "Start Installation". Make sure that Application Development Support is NOT under the upgrade section

  

  d. continue installation as usual and reboot.

  (5) the DAQmx palette should be in LabVIEW 8.5.1

  Please let me know if you have any question. Again, I apologize for the error.

• Minimum installation to analyze with DIADEM data stored on server Citadel 5

  I want to access the data stored on a server of the Citadel 5, with minimal software installed on the computer of the end with Diadem 11.1.

  The goal is to perform the analysis of the data on the data acquired by data acquisition on a centralizedCitadel server in our lab (possibly in read-only mode).

  In several positions, it is suggested to install the Client Web Lookout development/Run-Time Systems 6.2 Windows 2000/XP/Vista.

  However, this installs a set of components (for example SQL engine...), that we would prefer to avoid.

  What is the minimum configuration for a machine that has no installation of LabView?

  Sincerely

  Paolo Pierini

  Sorry for the misunderstanding;

  as noted in the knowledge base How to recover data from a data base of Citadel with DIAdem, you must install the Citadel 5 database Access Pack, which is included in the package of Lookout. In any case, you can also download and install the Citadel 5 database Access Pack separately at this link.

  This pack should be sufficient in order to retrieve the data from the database of the Citadel.

  I could not find the version for Diadem 11.1, but given that the Diadem version 10.0 is the newest published, in my view, should be

  Serena

• Digital installation of certificates with the private key

  I installation of digital certificates in three servers, each of them with Windows Server 2012 R2 Standard but just in one of them, the private key information remain available after installation. The purpose of these servers is to secure the communication with an instance of SQL Server that is installed on each server

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Factory reset after re-installation of windows with a different key

  Hi all

  I bought a laptop HP dv7-7264ez, with 8 pre-installed windows ENVY.

  After installing linux and messed with the boot settings, I need to re - install windows. Because I had not burned an iso of Windows 8 or extracted from my windows product key, I asked a friend to to burn me a DVD with his version of windows (Windows 8.1 pro). I did a reset of the PC of the utility of windows with this new version.

  Now, I try to get my old version of Windows (normal, not pro) for reasons morals and because I can't "activate Windows" with the version of my friend.

  To create a Windows DVD, I downloaded the Microsoft tool and extract from my current product key with this tool. The problem is that the extracted key is the version of my friend and it is not valid to create a .iso for Windows 8.

  In other words, I need to get my original Windows product key!

  Is it possible to do a factory reset 'real '?

  Or y at - it a database with all affected Windows keys?

  Thanks for your help!

  VincenT

  You are the very welcome.

  You may need to install the driver sata for your model.

  Try this...

  Download the drivers from this link below (first or second file listed - 32 or 64 bit depending on the case).

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=2101&DwnldID=23060&keyword=Intel+RAPI...

  Extract the files on a usb flash drive.

  With the flash drive and the installation of W8 media plugged into the machine, boot from the installation of W8 media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts and if this is the problem, install W8.

  There is no way I know of to recover the product key.

  It works with an OEM W8 as XP installation disc used for in ancient times.

  You had to match the installation media with the type of product key (OEM, sale retail or upgrade).

• Is it possible to repair an installation of sp2 with an installation disc of vista (without service pack)

  I have Windows Vista Ultimate SP2 installed on the drive. But I have an original DVD of Windows Vista (without service pack). Can I run the repair utility on this disc installation DVD? Will this work?

  Hello

  Loy is not going.

  You will need to uninstall the Service Pack on the operating system that is installed to do a repair installation upgrade with this Microsoft Vista DVD which has no Service Packs on it.

  The Service Pack on the DVD must be at least the same as the operating system Service Pack level installed to make it work.

  How to perform a repair for Vista Installation»

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  See you soon.

• Question about the installation of XP with an OEM disc and using the number of CoA HP

  Hello

  I have a DC5100SFF that I bought refurbished last year, and it came not with all drives. It comes with windows XP pro and has the CoA sticker with the activation code.  It also has "HP" written on it.

  I thought to wipe the hard drive and reinstall XP Pro in the near future.  I have an an OEM Windows XP Pro disc, but it is not specific to HP. The CoA sticker has been removed from the new drive (and the package is not open), but there is nothing on the packaging to indicate what OEM brand (its likely it was another popular provider).

  My question is, if I install XP from this disc, he on my machine can use the number on the certificate of authenticity to activate it, or do I need to use a specific disc HP XP Pro?

  Thank you

  Hello:

  David is correct. You don't have the product key if you use recovery discs.

  However, I believe that you can still get the recovery disc for your Business from HP desktop PC.

  Just dial 1-800-334-5144 and inform the representative of customer services that you need a set of quick restore CD.

  You will need to provide the model number and serial number.

  A game costs $10.00.

  As for your other question... If someone has already used the product key XP pro on the sticker on your PC, you can use any disk XP Pro OEM installation and enter the product key.

  I do it all the time. I used OEM Dell on HP PC disks. Never had a problem.

  Paul

• Wireless installation need help with Photosmart c309a Mac OS x 10.6.8

  I lost my hard drive and am now reinstalling my drivers etc. for the HP Photosmart c309a Mac OS x 10.6.8. It will print if I connect via the USB port, but my office is across the room from the printer. At the same time, I was able to print and scan wireless. The last time I had to reinstall I lost the ability to scan wireless, so I think I originally had it network via airport, but used Bluetooth when I reinstalled.

  Now, I can print when connected by USB, but I can't make a wireless setup works. When I try to print it says I am offline, and when I try to connect it says I am connected via the URL: usb://HP/Photosmart%20C309a%20series?serial= [my serial number here shows].

  I am connected to Internet via WiFi to the installation service. I can also connect through our Verizon MiFi. I would like the ability to scan and print, but if I am limited to Bluetooth and print only, I would appreciate help with this setup as wireless printing is the most important.

  Oh, the manual shows how to configure a Windows wireless system in both directions, but I do not use Windows. Thank you for all you can offer instructions.

  AHG,

  This guide should guide you through the installation process and get you up and running wireless. Let us know if this helps: http://goo.gl/c2IXf

  Good luck!

• installation of window with all users customize software exe

  Hello hy?
  my name is Rachel and I need assistance.
  How can I make windows 7 bootable with all other software like vlc nessary, pilot, chrome and other software I want to run our window having recently these instal download other software with them.
  I mean I want to make batch file when my window, it of be run then will run all the software and after that when I had my window then all software has been install on it.

  Review:

  How to create a custom Windows Installation 7 disc...

  and

  Customize your Windows Installation to create the operating system of...