Installation of Windows 2003: cannot find hard drive during the installation units

Similar Questions

• Windows 7 cannot find any driver for the new Ultra 6 Vodafone Smartphone

  'Android' and 'BAD' listed device driver drivers but says not installed driver or an unknown device in function of what I tried. Devices and printers displays two icons Android under the title unknown. Maybe two because I tried to install/connect this twice.

  Vodafone does not result of PC as Nokia or on Samsung Kies, so what I can do. I want to Exchange images and music in between?

  I welcome all updates automatically, Ramesh and I went to your link, but there is no update or link to solve this problem.

  The problem is that Windows 7 is incompatible with my new camera. I finally managed to contact someone at Vodafone which was more of an expert than before and after having followed his instructions, the PC had not yet installed the drivers for my camera.

  However, I have a solution! Forget the connection of the USB cable and...

  Someone recommended I try the AirMore app - and it solved the problem completely. With his help I am transferring files via WiFi. Once installed, you have to visit the website for AirMore and 'connect' the handset and PC live, then anyone can do anything that they could do it using a USB connection.

  I am very happy that I found this alternative. It will work no matter what OS you use or what type of phone. A near universal solution. Applause to its developers!

• P200-rt7 but Win XP Setup cannot find hard drive

  Hi, try to install xp on my Toshiba p200-rt7 and xp says it cannot find my hard drive. If I launch the install of vista dvd he finds it so I think I need to hit F6 during the xp installation and select "third-party drivers? If Yes, where can I get these drivers? If anyone can help?

  Thank you
  B

  Installing a version commercial (street copy) of Windows XP on a Toshiba Vista laptop.
  ----------------------------------------------------------------------------------

  Step 1: Prepare the BIOS
  -Go to section Support/Drivers on the Toshiba site and look for your model of Toshiba
  -If your phone has a separate version of BIOS for XP and Vista, download the BIOS XP and run it in Windows.
  -If you cannot start Windows, you can update the BIOS after installing XP.

  Step 2: Enable SATA Compatibility Mode in the BIOS
  -If installing XP cannot detect SATA drive, enable SATA Compatibility Mode in BIOS if this option is available and install XP.

  Step 3: Install XP using a floppy with the SATA drivers
  -If SATA compatibility mode is not available, you must use the SATA drivers diskette during installation of XP. Follow these steps:

  (1) Download driver Windows XP SATA F6 on the site of Toshiba Support/downloads.
  If a single SATA/AHCI F6 driver is unavailable, download and extract the Intel Matrix Storage Manager driver for XP in a temporary folder.
  The Intel Matrix Storage Manager driver package must contain some files under the folder "F6flpy". For example: C:\temp\Intel Matrix Storage Manager\F6flpy\ICH8M_32bit
  Choose the right folder. For example: ICH8M_32bit for a Chipset of Intel ICH8 during installation of Windows XP 32-bit.

  (2) copy these files (iastor.inf, etc.) on a blank diskette. The files must reside in the root directory of the floppy disk.
  For example: A:\iastor.inf, A:\iaahci.inf, etc...

  (3) connect a Toshiba USB floppy drive to the Toshiba laptop. (some non - Toshiba USB Floppy Drives may not work correctly during the installation of XP)

  (4) (4) demarrer start from the Windows XP CD, start the installation and make sure that your floppy with the drivers is inserted into the floppy USB drive.

  (5) for the XP installation invites you to press F6 to install a storage driver, immediately press F6.

  (6) for installing XP you invites to select a SATA driver, select the appropriate driver and continue.
  For example: ICH7M Intel(r) 82801GBM SATA AHCI Controller, Intel(r) ICH8M 82801HEM/HBM SATA AHCI Controller

  (7) keep the attached floppy drive and floppy disk inserted XP has not completed its installation.
  Do not partition or format the hard drive during the installation of XP. The diskette SATA drivers are copied and stored on the hard drive during the installation of XP.

• I use CS5.1 and installed a new hard drive. during the migration, PS now will not work. How can I reinstall? installation initial performed from the internet, no discs.

  I use CS5.1 and installed a new hard drive. during the migration, PS now will not work. How can I reinstall? installation initial performed from the internet, no discs.

  Download the CS5 products

• "windows cannot find a driver" in the installation package?

  We have a file server and print XP on our network that has a printer Series PCL LaserJet 3330 installed 5th (using the original installation CD and prints from the XP Server). While trying to install the printer on a remote computer, I downloaded the driver package Windows 7 64 bit for the printer on the computer remote and got the error: «Windows cannot find a driver...» "(I don't understand why the pilot was not as it should be in the installation package.) After getting this error - several times, including the re - download the package and re - try - I downloaded the XP Server installation package and I changed the printer driver it as a package to install downloaded for XP. We always get the same error. The installation of the printer worked fine before having to redo our BONES. Anyone know this problem and can help with this?

  This issue is between 64 bit and 32 bit, and there is an easy solution. Once you get back to the way it was before you downloaded the 64-bit package that you go to the machine that you want to load the printer and the printer as a local printer using load say lpt1 port. Auto not detect or print a test page and just finished the installation. Now on the windows 7 computer to join devices and printers and right click on the printer icon and scroll the properties first and left click. Go to the ports, and then add the port and in the box that comes up to put in the name of printserver and the share name of the printer by using the syntax \\printserver\sharename how save and apply and this computer will now be able to print to the printer.

• I am trying to install Windows 7 on my hard drive, but the installer tells me that I need the driver "Promise Technology Inc. Ultra IDE Controller".

  I'm trying to install Windows 7 on a (40.1 GB) partition on my hard drive, but the installer tells me that I need the driver (Promise Technology Inc. Ultra IDE Controller.  I searched the Internet and tried several, but no results.  Can someone point me in the right direction.  I have a box to open with Technical Support, but not a lot of help out there.

  Thanks in advance

  Joe Franklin

  original title: installation of Windows 7

  Hey Joe,

  I suggest that you visit the gigabyte website for your region (and/or the site global http://www.gigabyte.com/?f=g ) and check your motherboard for compatibility with Windows 7.

  The problem you are experiencing would imply that Windows 7 has no native driver support for your disk controller, so if Gigabyte don't have drivers that you are locked unless you buy a discreet disk controller that is compatible Windows 7.

  Please mark this as useful or response if applicable.

  On the other hand, you have this posted in a forum of Windows XP when it is really a problem of Windows 7.

  Tricky

• Windows 7 sees no hard drive in the installation program

  MB: Gigabyte GA-X58A-UD3R

  BIOS recognizes the hard drive SATA and IDE is set.

  HD is installed in channel 6.

  Hard drive was working fine before I reformated using the installation disc and am not convinced that it is a hard drive failure.

  I can access the drive on CMD in the full version of Windows 7 dvd.

  I reformatted the hard drive from the RAW to NTFS format, but did not have any partitioning prior to formatting. I don't know how to partition on a Virgin HD no OS.

  The MB is assigned to the IDE is really a driver problem?

  It is as if Windows 7 does not recognize it as a hard drive.

  Photo 1 (installation of windows 7)

  Photo 2 (diskpart cmd.exe)

  I'm totally ideas and I think it's a simple solution that I don't know how or where to look.

  He solved.

  What I did this from the site Microsoft...

  Method 8: Use the Diskpart.exe utility to clean the disk, and then run the Windows Installer again

  If you have tried all the methods that are listed in this section and the problem persists, use the Diskpart.exe utility to clean the disk, and then run the Windows Setup program again.

  Note Use this method only if you want to perform a new installation of Windows. When you clean the hard disk, it is formatted. All data on the hard drive and all the partitions are deleted permanently. We strongly recommend that you back up the files on the hard disk before cleaning the disc.

  To use the Diskpart.exe utility to clean the hard disk, follow these steps:

  1. Insert the DVD into the DVD drive.
  2. On the disk selection screen, press SHIFT + F10. A command prompt window opens.
  3. Type diskpart and press ENTER to open the diskpart tool.
  4. Type list disk and press ENTER. A list of available hard disks.
  5. Drive of salt of type number , and then press ENTER. number is the number of the hard disk you want to clean. The hard drive is now selected.
  6. Type det disk, and then press ENTER. A list of partitions on the hard disk. This information is used to verify that the correct drive is selected.
  7. Make sure that the disk does not contain required data, type clean all and then press ENTER to clean the disk. All partitions and all data on the disc is removed entirely.
  8. Type exit and press ENTER to close the diskpart tool.
  9. Close the command prompt window.
  10. Click the Refresh button to update the disk selection screen. This step lists the disk. (I installed the driver in this step)
  11. Restarted the computer because the interface was giving me errors.
  12. Run Windows Setup to perform a new installation of Windows.

• my pc will not boot up when I run the disc to recover its says cannot find hard drive

  my pc won't start recovery disc tried tried

  Windows 7 disk but will not work it says can't find hard drive

  Sorry do not know all the details of my pc

  I am not basic pc user

  Thank you

  If you use your PC manufacturers recovery disks and don't see "no hard disk" the chances are that the hard drive has failed.

  When you try to boot your PC normally what exactly is the error message?

• Windows XP Setup cannot find hard drive

  Running VMWare Fusion 2.01 (128865).

  I'm doing a repair of my installation of Windows XP Service Pack 3 on the VM.  I am able to boot from the CD and start the Windows Setup successfully.

  However, installing Windows says it is unable to find a hard drive and cannot continue.

  When I hit F3 and restart the computer, the virtual machine load XP on the virtual hard disk as before.

  How can I get the Windows installation to recognize my virtual hard disk and do a repair?

  Take a look at the following...

  If the virtual machine was created using Windows Installer Easy or has a VMware SCSI virtual hard disk, you must download the Drivers SCSI VMware and select the file vmscsi - 1.2.0.4.flp like the floppy drive of the virtual machine in the Virtual Machine settings sheet of the target. This disk image contains the necessary VMware SCSI disk drivers when booting with the Windows XP CD and you will need to press F6 when it says "press F6 if you need to install...". "at the bottom of the Virtual Machine window and it will then invite the driver after he continues to load additional files. Just follow the guests.

  BTW you may need to press the Fn + F6 etc. and this can be changed in system preferences > keyboard & mouse > keyboard > use all F1, F2, etc...

  If the Virtual Machine is not initiating the CD/DVD or ISO Image, and then select the CD-ROM in the Boot Menu.

  Engage the Boot Menu and select the CD-ROM drive...

  The bottom of the virtual machine just above the status bar after the Virtual Machine is started, it has...

  "Press F2 to enter SETUP, F12 for the start-up network, ESC for Boot Menu"

  On the status bar, it features...

  'To direct entry to this virtual machine, click inside the window.'

  BIOS flashing by is very fast so you need to work quickly however give it a try and if the Start Menu cannot be higher then the configuration of the Virtual Machine file .vmx must be edited to slow the STATION and or change the boot order.

  OK, click the big Play button on the screen of the virtual machine, and then quickly mouse click in the Virtual Machine screen and then press the ESC key to bring up the Start Menu and select the CD-ROM drive. If it boots the CD very well and if the Boot Menu does not appear, because he goes just to quick access and then try again or...

  Watch the Boot Delay section in the current user's Guide to VMware Fusion and the section of the virtual machine files of A Beginner's Guide to VMware Fusion on when the configuration of the Virtual Machine's .vmx file is and add the following lines to the file. TextEdit can be used to edit the .vmx file.

  To give more time to indulge, the Start Menu Add the following...

  bios.bootDelay = "3000".

  For, once, force the VM in the BIOS to change the Boot order in the BIOS if the CD-ROM is first add the following...

  bios.forceSetupOnce = 'TRUE '.

  Note: by default in the normal Fusion 1.x virtual Fusion function file are created in the folder "~/Documents/Virtual Machines" and according to host operating system version and or Fusion worm. There may be a .localized after Virtual Machines although by default, this extension is not visible in the Finder.

  ~ Is your Home Directory.

  The files that make up the virtual machine are placed in a folder (aka Bundle and or packing) bearing the extension '.vmwarevm' which, by default, this extension is not visible in the Finder.

  Example: "~/Documents/Virtual XP.vmwarevm Machines/Windows" in the Finder would just resemble an icon named "Windows XP."

  To view the contents of the entire file "Windows XP.vmwarevm" ctrl-click (or right-click) on the "Windows XP" icon and select Show the contents of the package.

  To change the configuration file of .vmx ctrl-click (or right-click) on the "Windows XP.vmx" file and select open with > choose another... then in Application choose TextEdit.

  Note: If you use Firefox do not copy and paste the parameters if TextEdit unless you copy only the exact line and nothing else in the case, use an editor such as TextWrangler.

  Also...

  When you use utility disk in order to have a bootable ISO Image, you must select Master CD/DVD without encryption in which case by default, it will have an extension .cdr file and in version 1.1 of the merger and later does not need to be changed in .iso, although one can if one chooses to. A default .dmg image is compressed and is not bootable, as an uncompressed .dmg will start if changed in .iso and of course the source CD/DVD should be bootable in the first place.

  To create an ISO Image using disk utility...

  1 insert the CD or DVD disc into the optical drive of your computer.

  2. open disk utility (/ Applications/Utilities/Disk utility).

  3. Select the CD or DVD drive in the list of disks and volumes.

  4. Choose file > new > "Disk Image from (name of the disc)."

  5. type a name for the disk image.

  6. choose "DVD/CD master" from the Image Format pop-up menu.

  7 choose "none" from the encryption pop-up menu.

  8. click on save.

  Also...

  Take a look on: VMware Fusion menu bar > help > VMware Fusion help > manage virtual machine > configure the CD/DVD drive

• Satellite Pro L300 - installation of Linux RHES4 cannot find HARD drive

  Hello

  I have a Toshiba Satellite Pro L300 and it comes with preinstalled Vista, I loaded the XP due to the fact that I was going to see if I could load linux Redhat Enterprise 4 and dualboot both operating systems at the same time but discovered this "DOUBLE BOOT" means that you can have 2 operating systems but can only bott one or the other...

  Anyway, my problem is that I want to just install Redhat Enterprise 4 linux on my laptop, but when it comes to partition the hard drive I get an error message saying "cannot find the hard drive to create file systems" then click OK and restart.

  Any ideas people?

  Chris.

  Hello

  I m not a Linux expert, but I think that the reason is missing SATA drivers.
  Normally, on each notebook with SATA HDD, you need SATA drivers to recognize the HARD drive before installing OS.
  If you install Windows XP or Vista, you need storage for this Manager. The drivers can be loaded with an external floppy drive.
  But I put t know how it works on Linux

  An alternative you can change in the mode of AHCI Compatible HARD disk BIOS. Then, you don't need drivers and your disk should be recognized correctly.

  Otherwise, I recommend this thread: http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=14

  Welcome them

• Cannot find HARD drive protection service

  Hello

  I have the Satellite pro 200 u. I instaled the new system (windows xp professional service pack 3). OK, I installed most of the tools and utillities and all work, but I have a problem with the HARD drive protection. I start out by the system. When I try to open or open the settings window appears and it says:

  "---------------------------
  TOSHIBA HDD Protection - definition
  ---------------------------
  HARD drive Protection service cannot find.
  ---------------------------
  Ok
  ---------------------------
  "

  What can I do?

  Hello

  > I installed most of the tools and utillities
  What tools are installed exactly?
  Toshiba tools to install first the common Modules. It of necessary for all of the other tools. Check it!

  More sure that Satellite Pro U200 is equipped with the protection of the HARD drive?

• Satellite L300 - Win XP Setup cannot find hard drive

  My Satellite came with vista installed. No disc Toshiba down grade to XP. When you try to run the installer, he comes back with the program Setup cannot find the hard drive connected to this computer, make sure power is connected etc. It doesn't matter if I delete the vista partition or not.

  I copied the XP cd to the hard drive, but here the Installer gives blocked application because the current version is newer than the version you want to install. (not verbatim) Vista and both are my precious new copy of XP Home SP3 OEM. If anyone can help... PLEASE, I BEG YOU!

  Thanks in advance
  Special characters

  Hello

  You really Don t know why it happens?
  You don t have a clue?

  In this case, use the forum search. You will find hundreds of discussions on this and it s not a bug, it s a feature. The magic word is Intel Storage Manager.

• No visible hard drive during the installation of Windows 8 during the transmission phase of gathering primary.

  Hello

  I recently bought an Alienware m18X R2, and I wanted to install windows 8 (new installation) on this subject. I go through the ordinary procedure and boot from disk or during the time to choose the main drive for the installation. None of the drives are visible (error. no driver drive drive-impossible to find discs), this is the same error that occurred when I resorted to a regular update. Kindly advice. I have 2 drive HARD 500 GB in RAID 0, and a 64 GB SSD to set caching.

  Rémy

  What you need is the driver of TSRI Intel (see below).

  downloadcenter.intel.com/Detail_Desc.aspx

• Newly converted Virtual Machine Windows 2003 contains no hard drive

  I'm looking on the advice of this problem.

  I used vConverter 4.0 to transform the four physical servers to virtual machines.  Two of my attempts ended in failure.  One was a standard Server Windows 2000 running as a web server. He just cut to 3% or 4%. Let this old trash server at the moment.

  The second is a Windows 2003 Web Edition Server.  The P2V process actually all the way!   But I can't start. I discovered that the physical server C drive was not there?  When you change the properties I see only one hard drive (it would have taken to 10 GB and 20 GB) it seemed to me that if the configuration in the setup of P2V has been misinterpreted?...

  Initially, I made it clear that the 51 GB drive C and 74 GB - D drive should become a 10 (only use 4.8) and a 20 GB (only 11.5 GB used).  Instead, I found myself with a huge 72GO disk in the virtual machine

  In this fourth attempt, trying now not to tamper with disk sizes and rely solely on provisioning.  And there is room for the 51 + 74 GB of disks on the ESXi host expected they exploit the full potential.

  But it really intrigues me I get a different result that I opted for in the configuration of the P2V.

  No explanation?

  The server in question is from the disks IDE and a legacy mainboard with an old Pentium 4 processor - not really a server.  On the other hand I have converted two physical successfully servers, just until I came across this problem. It was 12 to 14 years old Compaq DL380 G1 servers with SCSI disks.

  I think part of the problem is that you cannot change the type of IDE SCSI controller (it's in step 3). You can try the following steps, but if it was me I would just start the conversion, resizing disks you want and ensure are using a SCSI controller

  http://KB.VMware.com/kb/1016828

• XP Setup cannot find hard drives

  Hello. I'm new to VMware and decided to download and install ESX 3.5 on an HP XW6200. Installed ok but I tried to install my first server VM. a XP sp3 ISO I have. I have it configured with one processor, 256 MB of RAM and 30 GB BusLogic emulated disk VM. I have started the installation but received an error message that windows did not find a hard drive to install the operating system. I found an article at the bottom of the knowledge to repoint the floopy drive to a file called vmscsi - 1.2.0.4. Done, but still not find a disc. Rebooted and you press F6. When it comes to floopy I press on enter but it doesn't seem to find, said and and invites me to support on enter agin fto find disks. Help? Not sure where I am going wrong? Thank you.

  You make the right choice by pressing F6 at the start. If she does not see the disk then make sure that it is configured to connect to the power on and you have chosen the right floppy image. Make sure that it is not trying to boot to the floppy disk by going into the BIOS of the virtual machines and change the boot order or by pressing "Esc" at startup which gives a one-time boot menu so that you can start your ISO image / CD of XP. Good luck!

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.