Installation of Windows XP on a new PC with a separate hard drive

Similar Questions

• Re: Installation of Windows XP on Satellite X 200-23 G - no HARD drive

  I tried to install Windows XP on my Satellite X 200-23 g, once I settled but that the Bureau saw... blue screen of death.
  Error occurs and it went by restarting the cycle... so I installed VISTA de Deposito cd again.

  Now when I try to install XP from other CD I have, it says hard drive not found press F3 to exit. s

  Someone please enlighten me on this issue...
  I need to install xp as my college progs and not compatible with vista.

  Hello

  Your Windows installation does not see the HARD drive because the SATA drivers were not included in the XP installation CD.
  The new generation of portable computers is equipped with a SATA HDD controller. But don t Win XP or Vista one pilot built-in SATA.

  SO, you will need to download the Intel Matrix Storage Manager. You will find the SATA drivers.
  You can use nLite software. It of free and it will help you to create a new XP CD and include the SATA drivers. You can then use this new XP installation CD.

  This Toshiba document could be useful.
  [How to integrate a SATA AHCI driver into a Windows XP installation CD | http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm]

  See you soon

• Installation of Windows XP does not see on Satellite Pro P200 HARD drive

  I just bought a Satellite Pro P200 and I want to install windows XP.

  The problem is the windows installation sayis qhen that there is no hard drive detected.

  The laptop has two HD 200 GB each.

  Can someone help me?

  Thank you

  Hello

  You must first install the Intel Matrix Storage Manager before you continue the installation of XP.
  It s a same as RAID driver installation procedure
  You need to press F6 during installation to include the necessary files of the Intel Matrix Storage Manager

  I found this on the page of Intel:
  http://Downloadcenter.Intel.com/Filter_Results.aspx?strTypes=all&ProductID=2101&OS FullName = Windows * + XP + Professional & lang = eng & strOSs = 44 & submit = Go %21

  Good luck and thanks for posting the results

• I'll be able to use the Windows 7 operating system on my new motherboard with the same hard drive?

  I have a card mother broken dell and I wonder if I change for a card mother Msi or Asus, but I always use the same hard drive that have my bones inside. I'll be able to use the operating system on my new motherboard?

  Original title: Windows 7

  No, you will not be able to.

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  What is OEM software? :
  http://support.Microsoft.com/GP/oemsupport_1/en-GB

  Licensing FAQ:
  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

• How can I connect the new installation of Windows 7 for the user profiles on a separate drive har?

  Original title: connect Windows 7 to the output of user profiles?

  I want to reinstall Windows

  My user profiles are on a separate HARD disk
  Is it possible to connect the new install of Win 7 to these existing profiles
  Or I'll create all new profiles and just move all the files manually?

  You can change the registry so that it points to your old profile folder. However, I suspect that this would cause problems because the SID and many registry keys would be incorrect for the current installation. I would like to move the folders manually.

• I installed Windows XP on my new computer (with Windows 7 PRO), but my USB does not work on Windows XP. It works fine on Windows 7

  I installed Windows XP on my new computer (with Windows 7 PRO), but my USB does not work on Windows XP. It works fine on Windows 7.

  Hello

  And much more: (XP mode requires professional, Ultimate or Enterprise).
  

  Get all the benefits of Windows 7 and continue to take advantage of your investments and more
  business and productivity programs that require a PC running Windows XP.

  Note: Windows XP Mode requires a download.
  http://www.Microsoft.com/Windows/Windows-7/features/Windows-XP-mode.aspx

  Windows XP mode
  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

  Windows XP Mode is supported through Technet

  TechNet - Forums - Windows 7 virtualization
  http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• came loaded with Windows Vista Home Premium. Recently, I reformatted the hard drive and did a clean installation of Windows 7 Professional. I have no games. No solitaire, Minesweeper, no nothing.

  original title: lack of games
  I have an Acer Aspire PC. It came loaded with Windows Vista Home Premium. Recently, I reformatted the hard drive and did a clean installation of Windows 7 Professional.

  I have no games. No solitaire, Minesweeper, no nothing.
  How can I, without seeking to erase and reinstall again?

  To activate the built-in Windows 7 games:

  1. click on Start (lower-left) and then on Control Panel.

  2. click on programs and features.

  3. on the left side of the screen, click on 'Windows turn features on or off".

  4. find the entry called games & check the box next to it.

  5. click on OK.

  6 reset.

  If the games box is already checked, uncheck the box , click OK, restart, then do steps 1-6 above.

• I have a compaq presario cq60 with vista which was able to start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. What can I do?

  I have a compaq presario cq60 with vista. Could not start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. I took the hard drive and installed in my office. Windows Explorer displays the main and recovery partitions.

  The primary partition has the following folders (including hidden & system)

  The recovery partition has the following (including the language files more)

  Someone at - it ideas why my laptop does not work?

  Thank you

  Greg

  Hello

  You press F11 on startup with a HP Compaq to start the recovery process.

  For problems with the recovery process, you will need to contact HP.

  BIOS problems:

  There are messages for the HP Forums for posters with similar errors:

  http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/notebook-HDD-problems-TEst-status-1-07-fail/TD-p/658902

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-dv8000-getting-1-07-fail-error/TD-p/883284

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-notebook-dv6000-1-07-fail/TD-p/1069457

  All the answers it point to a drive about to fail

  See you soon.

• Unable to see the new files from the external hard drive in Windows Media Player library

  Original title: music is dead

  Windows media player does not recognize my external hard drive on all my computers windows 7, but works fine on my xp. has taken the laptop shop they led produced songs media player then reinstalled them, and it worked. but when I added more songs on the ext. harddrive and tried to play on windows media player 7 it does not find new! can't afford to take to the store whenever I have download music and want to play on my Media Player 7. is it auto recognition? When I plug the ext. harddrive inside automatically so reads the news on it?

  It has been fixed thought

  I had posted a question on my Ext. harddrive, my windows xp Media Player recognizes new music I have add out of it, but all my computers which are used to windows 7. then I myself especially when I add the new music on the hard drive for media playyer on xp I have spend the toolbar and click on file, then click Add to library computer search and it adds to the media player library. but windows 7 does not have this option. I noticed if you click file, and then manage libraries, and then the music lets me add my Ext. harddrive (e drive) to the library list. on a computer it support of new music and videos found on the hard drive, on two computers it just music, so I downloaded a song and a video on the hard drive, plugged into the computer and media player says that it has been updated of library, and yet there they never found the new files. Why have they changed? XP was so easy. new is not always better!

  Hi Bob,

  According the description preceding, Windows Media Player is not picking new music on the external hard drive.

  I suggest you to perform the following troubleshooters.

  Open the troubleshooting Windows Media Player settings Troubleshooter

  http://Windows.Microsoft.com/en-in/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Open the troubleshooter in the Windows Media Player library
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter

  Post us the results once you try the steps above.

• I have a problem of my catalogs of PES 10 displacement and the photos attached from my old computer with Windows XP on my new computer with Windows 10.  The problem is that I can't remember the arrangement of the original tree of my photo folders when I r

  I have a problem of my catalogs of PES 10 displacement and the photos attached from my old computer with Windows XP on my new computer with Windows 10.  How can I keep my original photo folders tree arrangement when I restore backups of catalog on the new machine?

  The problem arises because Windows 10 is equipped with a new tree structure with new names for many of its branches.  Tree of Windows XP starts to Local Disk (C), and then does the following: Documents and settings, Susan [it's me the user], My Documents, SusanPhotos (the folder that I created that contains my photos) and then several subfolders and subfolders with my photos grouped by theme, for example the Puglia Italy and Italy-Roma.  My new computer Windows 10 has a different tree and different names for a large number of branches from early on: OS (C) [instead of Local Disk (C)], users, Susan, Documents [instead of the old My Documents], SusanPhotos [what I created] and then the subfolders and so on.

  Because of the new tree and the new names of the branch, I can't find a way to restore my PES 10 catalogues and photos attached to them to where I want to that they.  What I want to do is put the files from SusanPhotos to the Windows 10 Documents folder so that I find myself with the following tree, essentially the same as what I had on my old machine: OS (C), users, Documents, Susan, SusanPhotos, then the original subfolders with my photos.  Apparently 10 PSE does not allow me to move folders of photos in the Organizer, so that the pictures stay connected.

  PES 10 offers 3 options for restoration: Original, personalized and customized, keeping the original structure of the file.  Here's what happens to each:

  (1) original creates new folders with the old names and the structure of the tree, parallel to the tree Windows 10 has instead of inside the tree Windows 10.

  (2) custom with the original structure of the file is the restaurant where I want (within the SusanPhotos) but retains all branches superfluous-instant initial tree of Windows XP, production: BONES (C), users, Documents, Susan, SusanPhotos, Documents and settings [carried over from the old computer], Susan, My Documents, SusanPhotos, Roma-Italy and Italy-Puglia and so on.

  (3) custom (without checking the original file structure box) makes every SusanPhotos but without any organization: OS (C),..., SusanPhotos, Italy-Puglia and Italy-Roma and all other folders at the same level instead of in their original nested groups with subfolders.

  The first two methods you end up with a tree that is chaotic with two parallel trunks or a single trunk but with several redundant layers carried over from the old computer.  The third ends with no tree at all.

  One solution would be to make a Custom Restore with the original structure of the file and then use PSE10 to move the folders that I would like.  However, AFAIK, PSE10 I cannot move entire folders of photos, only of individual pictures.  With thousands of photos in hundreds of cases, the time required for the movement of individual pictures is prohibitive.  PSE10 allows me to move the catalog folder, but apparently not the folders containing the photos.

  The result is that at this time I have no solution to my problem.  Can you help me find a way to restore my photos while keeping their original organization?

  One solution would be to make a Custom Restore with the original structure of the file and then use PSE10 to move the folders that I would like.  However, AFAIK, PSE10 I cannot move entire folders of photos, only of individual pictures.

  You simply use the 'Files' Panel on the left. Your folder tree appears. Simply, you drag and drop the folder to move with all its subfolders in the desired master file. That works exactly as in Solution Explorer, so be patient, you receive no message of progress until it is completed.

  You did a good job to understand the situation. I think that might help you is to understand that changes in the way default folders are created in a different version of Windows can be ignored if you do not use these structure 'default', from the shortcuts to your main folder of the user.

  I create a master folder 'My Photos' directly under the C: root.

  When I restore, I use the "custom" choice, as you have discovered, I only specify this folder in the restore process, and I completely ignore the default shortcuts to 'Documents' or 'Image '.

• I bought standard XI but the download - new laptop is not a hard drive. Can someone please send me a link to download so I can activate with my serial number?

  I bought standard XI but the download - new laptop is not a hard drive. Can someone please send me a link to download so I can activate with my serial number?

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7
  • Lightroom: 5.7.1. 5 | 4 | 3 | 2.7 (win),2.7 (mac)
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Download and installation to Prodesigntools help links are located on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions". window using the Lightroom 3 link to see these "important Instructions".

• I can't activate my real Vista on 'New' material by using the hard drive of my old hardware

  OK, I got a laptop comes pre-loaded with windows Vista and it has got water damage and shorted, the hard drive however is in good working condition. I bought a laptop replacement because I didn't want to be on another computer that someone else would break anyway.

  so I bought this used the laptop from a friend that he would use to intnet and games, she had similar specs as my old laptop except the proccessor was different but similar speed and what not. what I want to do is to install the hard drive from my old with Vista genuine in this 'new' computer that has a hard drive in a way smaller and is loaded with XP.

  compatible sound and I have already, but it asks me for my product key that I have but it says its wrong (I guess as its headquarters in the old hardware) so is there a way to unregister the old hardware or upgrade my hardware information in order to use my old hard drive and keep my status as a true?

  not only is a HDD larger but its quicker and there all my files ive been without for more than a year now and frankly I need it back so bad at this point

  Thank you thank you

  Sorry, but versions OEM of Windows Vista cannot be transferred to another computer.  The license is permanently tied to the original computer, it has been installed and activated on. Carey Frisch

• files and folders: How can I load all my files and folders to my new account of my external hard drive?

  Who can help, I just put a new account on my computer and deleted the old account. I backed up the old files on my external hard drive. I want to know is how can I load all my files and folders to my new account of my external hard drive? I thank you for your time and knowledge have a very nice evening, Shawn

  Because it's a new account (even if with the same name), the restore procedure is unable to put files and folders in the same place, they came (because this place technically no longer - if yes, then the process is done and the transfer is complete). It can create a set of separate files (maybe even under a new user name, if it has been stored in this way).  If so, all you need to do is copy the data as you would copy any other files and folders (not the main files of the user profile themselves but the data in them) on the new files in your user account and who will take care of the transfer. Here is more information about the restore procedure which may help you in the process.

  Here is an article on the restore procedure:http://www.vista4beginners.com/How-to-restore-files to make sure you do this right.  It's a selective restore of a full or selective backup (not a full restore from a full backup) - but since you did a full backup, it matches your process more closely than would a full restore.

  This is a GREAT article on the backup and restore processes in Vista http://technet.microsoft.com/en-us/magazine/2007.09.backup.aspx , but he won't go into detail about the restoration process - considering almost as easy, of course.  But it teaches you a lot about what is possible and how to do it.  It also focuses primarily on the full backup process, but he did mention the full backup and restore process as well.

  Here is an article on the advanced use of restoration (during normal restore does not work):http://www.mayankraichura.com/post/2009/08/06/Avdvanced-Restore-via-Windows-Vista-Backup-and-Restore-Center.aspx.

  Restore files from a backup
  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup

  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  I also found the following (but don't know if it of true or not):

  1. after the start of "backup and Restore Center."

  2. I chose "Advanced Restore"

  3. I was did not an administrator password... maybe because my account is an administrator account.

  4 choose "files from a backup made on a different computer.

  5. in the dialog box indicating "Select the location of the backup to restore", select "hard drive, CD or DVD...". »

  6. under the drop-down list box, select your drive/partition and continue

  7. If all the backups on your drive, it will show a list of them.

  8. in my case, he showed a backup, but in the backup location, it will show "backup location is not available."

  9. I was frustrated, but then I somehow just select this backup (Yes... even if he said that thebackup location is not available " ")

  10. and you press "next".

  11 guess what... no error!

  12. a window appeared asking me if I wanted to do a full restore, or I want to select specific folders or files.

  13. I selected the folders I wanted to restore and bingo... it their restored smoothly.

  14. so that the next time see a mistake, try to continue with him... ;)

  I don't know if this will help, but it does not provide much information about the process (when it works).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I had pre installed windows vista on my laptop. now, I replaced the hard drive. so, can we recover only windows giving you the serial number?

  I had pre installed windows vista on my laptop. now, I replaced the hard drive. so, can we recover only windows giving you the serial number? I have sony laptop.

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  http://eSupport.Sony.com/

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Mick Murphy - Microsoft partner

• Why Windows 10 PC can't see iPhone as a hard drive?

  Just updated the iphone to ios 10.0.2 6 and now my PC 10 windows Explorer does not show the phone as a hard drive.

  I updated itunes to 12.5 and itunes sees the phone.

  Hi GSObob!

  Joe_7399 helped me to solve the same problem, check out our conversation: iPhone not recognized by the PC but recognized by iTunes

  I hope this can help you too!

  Good day!