Installation of Windows 8.1 HP 15-r014TU laptop - cannot find 3668Microsoft Software License Terms

Similar Questions

• Windows cannot find the 3668Microsoft software license terms [Windows 8 companies]

  I have an image of Windows custom Enterprise 8 13 GB (with office, UI, apps and Lenovo customizations specific apps/drivers pre-installed, also auditioned the build to create a standard set of tiles of App in the splash screen for all users by using the sysprep copyprofile unattend.xml for OOBE option).  I have split into 4 files 3.6 GB stormwater management each [also tried files more small sizes 1.8 and 2.5 GB].  I copied them into the sources folder.  I renamed the file install.wim OEM install.wim.oem to avoid that it is deployed.  I created my autounattend.xml file and copied to the root of my key USB FAT32.  I need the FAT32 to install UEFI mode, so formatting to NTFS is out of the question.  FAT32 is a file size limit ~ 4 GB, that's why I split the backup.  Flash Player starts in mode UEFI end and autoattend kick-off, however, after that he started the installation process, I get the above error.

  I have tested with the following scenarios.

  #1

  Basic vanilla capture image with some modifications of the user of Windows 8 interface

  Sysprep/audit

  Sysprep/generalize (no unattend.xml file used for sysprep) /oobe

  captured image

  renamed the install.wim of OEM to avoid deploying.

  abandoned the set/3 GB of the file install.wim on the flash drive and using the same autounattend.xml.

  This setup through attempt went perfectly.

  #2

  using the same basic vanilla install Windows 8. WIM image from above, I split the backup into 3 files install.swm and them deposited in the flash player.

  I renamed the file install.wim OEM to avoid deploying instead of my image of stormwater management files

  I get the error above, even as I did using my custom 13 GB great image.

  When a WIM image is divided, why windows has wrong to locate the license terms or I do something wrong?  And don't say that my image is too big ;)  Is it possible to move the files to the conditions of licence in the first installation. Management of stormwater so that they are in one piece, perhaps?

  I did these tests several times trying DISM for capture and split covers as well as imagex and got the same results.

  Furthermore, I am a user of Ghost and since Symantec does not have a ghost version that supports the new UEFI to image partitions yet, I'm learning Microsoft way ;)

  Thank you

  CASE NO.

  You should post your question in the TechNet forum:

  http://social.technet.Microsoft.com/forums/en-us/w8itprogeneral?filter=noreplies

• error message when removing a program "an installation support file could not be installed, the system cannot find the file specified" _

  Try to delete a file from the Program Neighborhood Agent, so I can load a different version.  When I try to remove the program through the Control Panel, it says "an installation support file could not be installed, the system cannot find the file specified."

  Hello rarif, welcome.

  I recommend that you try and that you use the Windows Installer Cleanup Utility (WICU).

  1. go in:
  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  2. download the utility and install it
  3 run the utility from START > all programs > Windows Installer Cleanup...

  4. find the program you want to uninstall, then remove the
  5. next, restart your computer

  Let us know if this helps,

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Can someone help me with the error message C:\Program Files\Windows Live Gallery\WLXPhotoviewer.dll the system cannot find message for message number 0 X %1 in the message for %2 file?

  Can you help me? I can't open my Jpeg images in Windows Live Photo gallery. I get this error message;

   C:\Program Files\Windows Live Gallery\WLXPhotoviewer.dll the system cannot find message for message number 0 X %1 in the message for %2 file?
  
  
  I use Vista Home premium 32-bit.
  Cheers, Rob.

  Hi robgrimes

   

  As the issue seems to be specific to Windows Live Photo gallery, you can contact the Windows Live support team. I would recommend posting your query to community specific to Microsoft Windows Live. Please visit the link below to find a community that will provide the support that ask you in the right direction for Windows Live -http://windowslivehelp.com/product.aspx?productid=20

   

  I hope this helps.

• I am looking for an upgrade at any time key for windows 7 Professional or ultimate edition and cannot find a place to buy a

  I am looking for an upgrade at any time key for windows 7 Professional or ultimate edition and cannot find a place to buy one any where can someone help.

  Original title: Windows 7 Upgrade

  At any time the updates are most of the time is no longer available. However a commercial version of 'Upgrade' (not an OEM) will also do what you want. Only downside is the cost $$$ that Windows 7 is in short supply.

  Amazon: http://www.amazon.com/Microsoft-Windows-7-Ultimate-Upgrade/dp/B002DHLV8S/ref=sr_1_5?ie=UTF8&qid=1390672154&sr=8-5&keywords=Windows+7+upgrade

  All you have to do is enter the product key.

  =============================================================

  Windows 7 Anytime Upgrade: Instructions

  First read this: Windows Anytime Upgrade: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Anytime-Upgrade-frequently-asked-questions
  Subdivision: What should I do if I bought a package of Windows Anytime Upgrade key card, but there is no upgrade key inside?
  Answer: If you bought a package of key card upgrade and the upgrade key is not inside, carefully read the instructions on the packaging. You may need to go online to get your upgrade by using the PIN key which is included in the package.

  Note: Windows Anytime Upgrade is available for purchase online in Australia, Belgium, Canada, Germany, France, Italy, Japan, Netherlands, Spain, Sweden, Switzerland, United Kingdom and the United States.

  If you encounter problems recover your key product using your PIN code, please use the resources below.
  www.windows7.com/getkeysupport.

  Note: Retail 'Full' or 'Upgrade' product keys will work when you use the Express Upgrade feature.

  ======================= Upgrading ======================================

  No need to re - install Windows 7, just use the instructions of setting "Anytime" below.
  Note: This assumes that you upgrade from 32 bit to 32-bit Windows 7 OR 64 - bit to 64 bit.

  If you bought a package of key card upgrade and the upgrade key is not inside,
  read carefully the instructions on the package.
  You may need to go online ( https://windows.getmicrosoftkey.com/) to get your upgrade key
  using the PIN, which is included in the package.

  To start the upgrade process:
  Click on start/search and enter the words: Express upgrade
  Then, in the list of the search results, click on "Windows Anytime Upgrade".
  Then follow the prompts on the screen anytime upgrade.
  Basically, all you need to do is enter the Windows 7 upgrade product key.

  Alternative methods:
  (Located at the top right) Start/Control Panel/small icons option / click the "Windows Anytime Upgrade".

  Enter the text below into the run (Windows KEY + R or a command prompt) dialog box:
  %windir%\system32\WindowsAnytimeUpgradeUI.exe

  Upgrade to another edition of Windows 7 by using Windows Anytime Upgrade
  http://Windows.Microsoft.com/en-us/Windows7/upgrade-to-another-edition-of-Windows-7-by-using-Windows-Anytime-Upgrade

  A 'step by step' to go through an upgrade to a lower edition of Windows 7 to a higher edition of Windows 7:
  http://www.howtogeek.com/HOWTO/14943/how-to-upgrade-your-NetBook-to-Windows-7-Home-Premium/

  -Windows Anytime Upgrade in Windows 7 - troubleshooting

  http://www.thewindowsclub.com/Troubleshooting-Windows-Anytime-Upgrade-in-Windows-7

  Also the reinforced system - method #2 tool (download and run the tool: "Checksur.exe")
  http://support.Microsoft.com/kb/947821
  (System resources, such as file of data, even in the data memory and registry data, can develop inconsistencies during the lifecycle of the operating system. The system update tool attempts to resolve these inconsistencies).

  -Anytime Upgrade may not work for all versions of Windows-

  Note: Retail 'Full' or 'Upgrade' product keys will work when you use the Express Upgrade feature.
  Upgrade Express 'can' not work (check with the manufacturer of the computer support team) for users who have the OEM and integrators of systems product keys, this applies also to the VL (Volume License), keys (KMS) users management server should consult with your administrator before attempting to perform an Express upgrade. MSDNAA or key teaching will not work with the Express upgrade.

  -Anytime Upgade options-

  Windows 7 Starter to Windows 7 Home Premium
  Windows 7 Starter to Windows 7 Professional
  Windows 7 Starter to Windows 7 Ultimate
  Windows 7 Edition Home Premium to Windows 7 Professional
  Windows 7 Edition Home Premium to Windows 7 Ultimate
  Windows 7 Professional to Windows 7 Ultimate

  J W Stuart: http://www.pagestart.com

• Installation of Windows 7 Professional on a computer laptop windows preinstalled

  So yesterday, I did a check disk on C:, but since it froze because of some damage to windows, I force shut down (I'm sorry), but when windows came after that, the internet was off because the diagnosis Services policy has been down. After awhile, I realized that half of my registry was severely damaged causing most of the main as firewall programs and some services stop and does not start again. I checked all permissions, but nothing allows me to activate the services. My computer was really slow and freezing all the time anyway so I want to reset it to factory settings, or at least format my HDD, but the problem is that my HP laptop had Windows 7 Professional pre-installed on it so I have no disk to reinstall. Now I need help or opinnions popular on what to do, please someone help me on how to reinstall windows without the disc. (Restore doesn't work either) (I checked for the virus as well)

  Hello

  One option would be to create your own Windows installation disc, but you must always be able to read the activation key of 25 characters for Windows 7 Professional of your COA label - an example of a COA label can be seen here.

  You can download the Disk Image, you need from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  These Images are clean and a very respected source - Digital River.

  Images of Windows 7.

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software you may need are by entering either your model number. or Nr here.

  Kind regards

  DP - K

• Installation Wizard cannot find the software for samsung technologies, how to solve this problem?

  I'm not very good with computers and what not. I am using media player 10 I think (I have windows xp) and when I plug my samsung reality screan phone to connect to the computer and the computer does not find my device. He tried to download one software called samsung technology something or other, and he says that it cannot find its location. then he said to retaliate if I know where he is, but I don't have a clue as to what it means. Can someone guide me through this with the limited information I gave.

  Hi Grainger,

  We would require the following details to help you best.

  (1) you try to sync your phone to your computer using Windows Media Player?

  (2) did you get an installation as well as the phone disc?

  (3) what is the exact full error message you get with regard to the location?

  (4) did you connect your device with your computer as soon as possible?

  Alternatively, you can contact Samsung support team for assistance. You can contact them on the link below.

  Online Service Center

  https://www.Samsung.com/in/support/main/supportMain.do

  You can check the version of the operating system installed on your computer using the steps below.

  Operating system Windows am I running?

   

  http://Windows.Microsoft.com/en-in/Windows/which-operating-system

  Your answers are important for us to help you with the issue further. Write us with the details asked.

• Cannot start Windows install error "3 that the system cannot find the path specified".

  Original title: problem with Windows install

  the installer of Windows won't work, made sure that it's automatic in services, but when I click start it says error 3, the system cannot find the path specified

  Hello

  1. Did you changes to the computer before the problem occurred?

  Method 1: I suggest you unregister and re - register the windows setup program and check if that helps you. To do this, please follow the steps below:

  Unregister and register the Windows Setup program again

  (a) click Start, click run and then type cmd in the dialog box, and then click command prompt.

  (b) at the command prompt, type the following and press ENTER after each line:

  MSIExec /Unregister

  MSIExec/regserver

  Method 2:
  Also I suggest you to update your installation Package of Windows with the latest version of Windows Installer available in the link below.

  Windows Installer 4.5 Redistributable:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  Hope this information is useful.

• Windows gives me an error that it cannot find "C:\WINDOW"S\systern321rundll32.exe ".

  I'm trying to reactivate "C:\WINDOW'S\systern321rundll32.exe" but the pop-up window saying that it cannot find.

  Hello

  1. why you try to reactivate "C:\WINDOW"S\systern321rundll32.exe "?

  2 do you get Windows cannot find C:\Windows\Rundll32.exe error?

  3 did you changes to the computer before the show?

  Response with more information to help you further.

  Rundll32.exe program belongs to Windows and is used to run program code in DLL files as if they were in the program.

  Also, this file is also commonly used by spyware to launch its own malicious code.

  See the following:

   

  Method 1: See the following article:

  Cannot find the Rundll32.exe file when you open the control panel:

  http://support.Microsoft.com/kb/812340

   

  Method 2: I suggest you make a system full scan just to be sure.

  Here is a link that will give you information on how to perform a full scan of the system:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  , Note 1: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note 2: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

• Spooler problem printing with Windows XP error: "error 2: the system cannot find the file specified."

  Original title: problem with Windows XP error print spooler

  My printer stopped working (after several years of use); the computer is not even grateful as being installed. Cannot reload the printing software. Tried to download the software of HP, but all that says there is a problem with the print spooler file: error 2: the system cannot find the specified file... (when I try to start it directly)

  Hello

  1. What is the brand and the model number of this computer?

  This problem may occur if a third-party printer driver or an installed third-party service prevents you from adding printers, or if the third-party printer driver or the third party service affects the functionality of a newly installed printer.

  To resolve this issue automatically, click the fix for this issue link in the article below. Then click Run now on printing problems and printing errors troubleshooting, then follow the steps in this wizard. If the problem persists, perform the rest of the procedure described in the article.

  You cannot add a printer and you receive Printer Spooler error messages in Windows XP
  http://support.Microsoft.com/kb/324757

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows 7 Task Scheduler error: the system cannot find the specified file.

  Here is information when you try to change the properties of a task in the Task Scheduler:

  FX: {c7b8fb06-bfe1-4c2e-9217-7a69a95bbac4}

  The system cannot find the specified file. (Exception from HRESULT: 0 x 80070002)

  Type of exception: System.IO.FileNotFoundException

  at Microsoft.Windows.ManagementUI.CombinedControls.INetwork.GetName)

  to Microsoft.Windows.ManagementUI.CombinedControls.UINetwork.GetUINetwork (network INetwork)

  at Microsoft.Windows.ManagementUI.CombinedControls.NetworkListManager.GetNetworkList)

  at Microsoft.Windows.ManagementUI.CombinedControls.ControlTaskConditions.PopulateNetworkComboBox)

  at Microsoft.Windows.ManagementUI.CombinedControls.ControlTaskConditions.InitializeConditions)

  at Microsoft.Windows.ManagementUI.CombinedControls.EditTaskDialog.InitializeView)

  at Microsoft.Windows.ManagementUI.CombinedControls.EditTaskDialog.Initialize (file UITaskFolder, String taskName, String title, UserChoice userAction, BaseResultsControl inOwnerView, String inXmlText)

  at Microsoft.Windows.ManagementUI.CombinedControls.BaseResultsControl.EditTask (UITaskFolder file, String TaskName)

  to System.Windows.Forms.MenuItem.OnClick (ByVal e As EventArgs)

  at System.Windows.Forms.Command.Invoke)

  at System.Windows.Forms.Control.WmCommand (Message & m)

  at System.Windows.Forms.Control.WndProc (Message & m)

  at System.Windows.Forms.ListView.WndProc (Message & m)

  at System.Windows.Forms.Control.ControlNativeWindow.WndProc (Message & m)

  at System.Windows.Forms.NativeWindow.Callback (IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode.

  Please download and share with everybody fresh copies of your System log and journal of the Application (two files) of your event viewer on your disc one and post a link here. You can delete any previous copies of your OneDrive records.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do the same for the application log. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

  General remarks on event viewer
  http://www.gerryscomputertips.co.UK/syserrors5.htm

• Store Windows 8 will not be open. Cannot find a solution anywhere.

  By clicking on the app store causes a splash screen green with store logo on it will be displayed for 2 seconds. Then it switches automatically to desktop. I can always slip back to the app store opened, but it is stuck on the screen green logo and never loads.

  Update your laptop. You must be windows 8.1 to see/install apps in the store.
  You need the store windows in order to install windows 8.1 and my problem is that I can't open the store.
  Ive tried to clean up the cache
  Unable to get the store open to clean the cache
  Ive tried the windows store toggle to help run gpedit.msc
  "Windows cannot find gpedit.msc".
  I tried troubleshooting store/apps windows program
  ~ Said I needed a microsoft account to synchronize the settings. I now have an account and I restarted but the store still does not
  ~ Said I had to update the display drivers. Fact
  ~ Said I had to update a driver for a phone I no longer use... That's when I realized that this program does not do what it says it does. My old phone driver has nothing to with the opening of windows store
  Disable the proxy
  I do not use one. Box is unchecked under internet options.

  Register actxprxy.dll

  http://social.technet.Microsoft.com/forums/en-us/w8itprogeneral/thread/9ba1bd2a-6c5f-4839-BBD7-e5714ce702c0#a59d517c-5059-4cfc-b657-f96fac432cbc 

  Obtained registration successful boxes, app still does not.

  I tried calling support or the one dealing with what I am getting just 15 minutes hold tone, and then the guy who picks up I do not understand because of a thick accent. (Who even worse just me)
  My laptop has been like this for about 8 months now. I just didn't need the store ever and now I want it. Useful answers are appreciated.
  Thank you

  Hello

  Try the fix mentioned here and see if that helps:
  http://www.kapilarya.com/fix-modern-apps-not-working-after-upgrading-to-Windows-8-1
  Hope this helps, good luck :)

• Question about the installation of Windows XP Home edition on two laptops Satellite A200

  Hello everyone,

  I have 2 laptops (Toshiba Satellite A200) but in different model
  A200-1z3 and A200-1ub
  I need to install XP on them and they have VISTA OS

  I have the drivers but I've heard that I need to install the driver SATA HD

  I heard about a program called [NLITE]
  I'm not sure what to do.

  Could you help me please!

  Note:
  Windows XP Home for A200-1ub so I can I use it for other phones
  Please accurately.

  Thank you

  Hello

  You should search here in the forum for similar topics and you will find the answer soon ;)

  Just for the note;
  Toshiba has published several documents that might help you to install the SATA drivers and to include it in the XP CD:
  [How to integrate a SATA AHCI driver into a Windows XP installation CD | http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm]

  Driver SATA can be found on the Intel page too. An Intel Matrix Storage Manger contains these files needed to SATA.
  Please look for the IMSM package that contains the folder 'F6flpy '!

  Big names

• Professional Notepad: Installation of Windows 7 on a new PC laptop

  I intend loading Windows 7 on my new Business Notebook are there any settings I need to change? What should I know?

  Thank you

  Bill

  Hey Bill,.

  Windows 7 can be installed on most recent business PCs. There are some requirements and parameters, as you should be aware.

  • First of all, you can not install Windows 7 on a computer with a 7th generation of processor.
  • You must change the version of the TPM secure on the PC or install a fix from Microsoft.
  • You must use the legacy (non-UEFI) mode in the BIOS.
  • You need your own copy of Windows 7 and a license for Windows Professional 10.

  You can find more information and measures to http://www.hp.com/support/Windows7and10TPMFAQ

  Thank you
  Wes

• laptop put in wrong code to "reg" when had key number how to change a battery bought windows pro disk and updated but now cannot find where the same register that help please

  2 years ago, I bought a dell to Wal - Mart 6 months to a year later started having problems I was sent to a disk hard was not then a cd rom drive was not so ok dell restore discs but started again said I had to buy the record of service for 139 + or wipe because I was not registered. Well, I thought that I was put a few oem in place number victory reg key code that I now know that, battery, think you said dell ordered all this in a year without now im stuck so decided to modernize a victory pro from amazon.com but again I can not save one of them and I continue to have started off any HELP im new on computers and cell phones and im frustrated will be totally leave for months and then try to new any help appriciated thanks

  Use the key in your battery compartment (as long as it matches the version of Windows you purchased at Amazon) and activate by phone.

  You can not use the key (if it is a key 'Upgrade') as he was expecting to find a previous version of Windows installed and activated.

  Need an installation DVD that corresponds to your Dell key, read on.

  Download Windows 7 proper. ISO file that includes Service Pack 1
  (Note: must match for your product key version)

  Windows 7 Home Premium 32 Bit: http://msft.digitalrivercontent.net/win/X17-58996.iso
  Windows 7 Home Premium 64-Bit: http://msft.digitalrivercontent.net/win/X17-58997.iso

  Windows 7 Professional 32 bit: http://msft.digitalrivercontent.net/win/X17-59183.iso
  Windows 7 Professional 64-bit: http://msft.digitalrivercontent.net/win/X17-59186.iso

  Windows 7 Ultimate 32 Bit: http://msft.digitalrivercontent.net/win/X17-59463.iso
  Windows 7 Ultimate 64-Bit: http://msft.digitalrivercontent.net/win/X17-59465.iso

  How do I know if I have a version of 32 or 64 Bit of Windows installed on my computer:
  http://Windows.Microsoft.com/en-us/Windows7/find-out-32-or-64-bit

  After downloading the file correct .iso using ImgBurn or ISO gear to burn a bootable DVD.

  Create a Windows 7 Bootable DVD using the. ISO file
  Engraving of a file of Windows 7 ISO on a DVD
  http://support.Microsoft.com/default.aspx/KB/977640

  ImgBurn - in addition to supporting the creation of CD/DVD of. ISO files,
  It supports a wide range of image file formats, and it's free.
  (BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
  http://www.ImgBurn.com/

  Projectiles help you to use ImgBurn to screen: http://www.imgburn.com/index.php?act=screenshots
  Burn the ISO Images with ImgBurn article: http://neosmart.net/wiki/display/G/Burning+ISO+Images+with+ImgBurn
  (Les étapes sont les mêmes pour Windows 7 ou Windows 8), except that you do not create a repair disk but complete an installation DVD)

  Note: Always use high quality DVD + R media and slower burning (4 x or 6 x) speed is offered a choice.

  ====================== Keyless Install ================================

  How to make a 'Keyless Install"of Windows:

  Boot from the Windows 7 DVD disc, you create and launch the installation.

  After entering the username and password you will be asked to: "Enter your Windows product key", do not enter a key.
  Also located right underneath the box where you must enter the key is a box with a check box 'Automatically activate Windows when I'm online', remove the checkbox and click "next".

  You now have a 30-day grace period to activate Windows.

  During this 30-day grace period you can try to solve your problems.
  After you are satisfied with all the problems have been resovled then activate Windows.

  ====================== Device Drivers =================================

  Go to your computer manufacturer's support web site and search for Windows 7 drivers for your specific model number.

  If there are Windows 7 drivers, then to download to a folder on your hard drive and install all of them, starting with the card drivers mother/chipset, SATA, LAN, Audio, USB, graphics, Webcam, Etc., and so on.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
  Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problems

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  = How to activate Windows 7 by Internet =.

  1) click Start and in the search for box type: activate
  2) click on the 'Activate Windows' option at the top of the list
  3) click on "now, activate Windows online.
  (4) enter your 25-character product key (not case sensitive)
  5) click "Next" and wait for the key must be verified.

  Another method - to reach a real person:
  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048

  J W Stuart: http://www.pagestart.com