Store Windows 8 will not be open. Cannot find a solution anywhere.

Similar Questions

• Store Windows 8 will not be open. Could not establish connection due to server problem or connection has expired

  I had upgraded to windows 8.1 two weeks ago and had problems I did a system restore. Went through the update and now the store windows will not open so I can upgrade to 8.1 windows again. Any help would be appreciated.

  Hi Pinaki,

  Hooray!

  I couldn't understand how to disable McAfee so I uninstalled and installed AVG, now I install 8.1.

  Hope everything goes well.

  Thank you once again.

  Frank

• Windows 7 will not install, it cannot find the drivers

  I have a Dell Dimension XPS Gen 2. I am trying to install Windows 7 Home Premium on a new SATA drive. Before installing, I formatted the hard disk by using Windows XP (running on another HDD SATA). The two SATA drives are connected directly to the motherboard.

  I install from a flash drive, for reasons I will explain below. The installer comes to the point where it asks if you want to perform a custom installation or upgrade. I select custom installation, and the next screen says it can't find drivers and guests to find the drivers. Because I can't provide the necessary drivers, the installation does not further.

  I could copy the drivers to the flash drive, if I knew what files they were. The drivers from the site Web of Dell's downloadable apparently only as a .exe file that you run to install drivers, in order to get the individual driver files is problematic.

  Previously, I tried to install Windows 7 from the original XP disc. This is 'successful', apparently because it finds the drivers what he needed on the XP disc. But then I couldn't boot Win7 except the XP disc was running. On this basis, I suppose that the pilots were located on the XP disc but not copied on the Win7 disk during installation, so that if I try to boot from the Windows 7 disc and the XP disk was not running, Win7 can not find the drivers and does not start.

  That's why I tried to install from the flash drive... so the new facility would be not dependent on disk XP to start. But now, as I say, the Windows 7 install program stalls at the prompt for drivers.

  You can use some advice. Thank you.

  Downloaded an older version of the Win 7/Vistadrivers and it seems stable so far.

• store Windows 8 will not update of applications preinstalled for standard user in a domain after an initial profile.

  Performed a clean installation of Windows 8 Enterprise.  Logged on as a local user; (the computer is not part of the domain yet). Run all Windows updates successfully.  Store Windows displays 15 update on live tile. The store opened, updates applied successfully.  Computer joined to the domain.  Sign in for the first time on this computer as a member of the domain administrator group.  Profile is normally based.  Windows live store tile shows 15 updates, updates applied successfully.  Log off, then back on as a standard domain user.  Store Windows displays 15 update on live tile.  Shop open, 15 updates is displayed in the upper right as usual, click on, try to update, app update screen says there is no update. Live webcam tile said even 15 updates. -This seems to be a permissions issue.  On the desktop if this happens under a standard user account, I am prompted to enter a username Admin and password to install applications to work around this problem, in the store or (metro UI) there isn't this feature.  How to work around this problem?  I found that in the standard user account if I uninstall one of the apps store in need of an update, (xbox music) for example, and then reinstall it from the store, the live tile stores bed 14 updates.  I could do that for all the applications that are installed by default on Windows 8, but it sounds a little crazy.  This problem seems to occur with pre installed applications requiring updates once your profile generated for the first time.  Suggestions?...

  Hello

  For support of Windows 8 Enterprise edition and related issues, please ask this question in the following forums.

  Windows 8 IT Pro category:

  http://social.technet.Microsoft.com/forums/en-us/category/w8itpro

  Concerning

• Windows Vista will not start and cannot recover

  I have a desktop PC HP Compaq Presario, which has about 2 years. The problem started when Windows Vista was not able to start. It would load up on the "COMPAQ" screen and then it would just go to a slider black white screen with a flashing white light on the top left. Now that I've seen a lot of discussions with this similar problem, but it seems that people would rather not reformat in order to lose any important data. But in my situation, I have some important data on my computer so reformatting would be fine, except...

  -Recovery system won't work. I insert the 1 system recovery disk, all files loading correctly, it allows me to choose if I want to reset the computer to factory settings, I click Yes and it finishes the reformatting step. But then the problem comes when I insert disc 2, original content relocation step. It fills up to 10-16% and then I get a blue screen of death STOP: 0 x 00008086. I tried SEVERAL times and the same thing happens.

  -The next thing I tried to do is to fix the computer via a copy burned Windows Startup Repair. Loads everything up, I spent the page where I choose my language, currency, etc. The problem comes when I get to the System Recovery Options. There is no listed BONES and a box appears and says "Searching for Windows installations", and then it stalls just on this pop up. This problem is quite recent, because before there is no pop up and there is simply no OS listed, so I still could not repair or restore in any case.

  -Before, when I was able to go into the advanced options on the Startup Repair disk (when he was not of "searching for Windows installations" pop up to stall on), I'd go to the command prompt in attempt to chkdsk/r C:. All bad sectors or groups or something else would be fixed, and then he would hold to step 5 of 5 when checking free space.

  -In addition, I tried to make a diagnosis of memory via the Startup Repair tool. That's what I get:

  File: \boot\memtest.exe

  Status: 0xc000000f

  Info: The selected entry could not be loaded because the application is missing or corrupt

  
  

  Furthermore, I cleaned my computer, it is now almost completely free of dust. In addition, I can't get into the BIOS, I can't get into safe mode, and now I can't have in the command line

  Hello

  If you are unable to enter the BIOS and all the other problems, you have hardware problems
  and need the help of a real store of the computer (no leeks and glances at a Best Buy or any other
  Department stores) or Support of HP/Compaq.

  Compaq Presario Support
  http://www.Compaq.com/country/cpq_support.html

  Forums for HP/Compaq
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• store Windows 8 will not download apps

  My store of windows 8 is not download updates or applications, they are all keep the status "pending" or worse yet, there is a message saying that the application could not be installed, with the error code 0 x 80080005. How can I fix?

  In the end I just had to realize that the registry has been corrupted and did a complete reinstall of windows 8.1. It solved my problem.

• store Windows 8 will not open

  When I try to open windows 8 store to download an application it say that there is a connection, a delay I'm connected to the internet.

  Hello Monique,

  I would like to know some information about the problem so that we can help you better.

  What is the code and the complete error message when you say, 'timeout '?

  Thank you for details on the issue.

  I also know that the inconvenience that you are experiencing due to problem Windows of the Bank. I will definitely help you.

  This problem may occur due to corrupted Windows store files and settings.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run Troubleshooter app and check.
  See this link:
  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  If this does not help, use method 2.

  Method 2:
  Disable any proxy , check the question. Please follow these steps:

  a. press Windows + R keys, type inetcpl.cpl in the immediate window and press ENTER.

  b. click the "connections" tab and then click on "network settings."

  c. Click to uncheck the "Use a proxy server for your LAN" checkbox , and then click ok.

  d. click apply and ok.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Clean reinstalled Vista. Windows Defender will not be open and turn on. Can I uninstall and reinstall WD?

  I use Windows Security Essentials OK, but Windows Defender is DISABLED and cannot be turned on. What should do?

  I use Windows Security Essentials OK, but Windows Defender is DISABLED and cannot be turned on. What should do?

  Windows Defender is part of the Vista operating system. It cannot be uninstalled, nor can you install another fresh copy in the system. This Windows Defender lives and dies with the operating system.

  It is called Microsoft Security Essentials, not Windows Security Essentials.

  MSE (Microsoft Security Essentilas) is supposed to close Windows Defender.
  This is because MSE has his own Defender. Run 2 defenders in the same machine allows to create conflicts.

  Therefore, it is normal to find widows Defender NOT enabled if you installed MSE.

  You don't have to do a thing. So be.

  If you want Windows Defender turned on because you want to access with the startup programs, here's another way without using Windows Defender...

  Start button in the search box, type msconfig... Enter... click on start up tab... Here is the list of your startup programs.

• Windows Update will not be open to place a window titled "Windows Update" opens with some icons on this subject, but no text

  Hi, when I click Start---> Windows Update or the control panel--> Windows Update, a window titled "Windows Update" opens with some icons on this subject, but no text!  I'm guessing this is an error message, but there is no text, so I have no idea what is the error message. I tried running Microsoft Fix it 50202 but nothing has changed.  I am running Windows Vista Home Edition.

  Screenshot is below.
  Thank you.

  Hello

  I suggest you to install the update to Windows in clean boot state and check.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Some applications Windows 8 will not be open and constantly return to the start screen

  Some Windows 8 applications (calendar, Photos, Messenger, etc.) do not open and return to the start screen. I updated the computer, so the apps worked during this session.  However, after that I disconnected and re-connected to the laptop the next day, the same apps stopped working again.  This continues that occur on a regular basis.  How to solve definitively the problem?

  Note: I noticed that others have this same problem, and I tried the troubleshooting suggestions (i.e., to download the troubleshooter of the modern user interface, cache cleanup, etc.), but none of these suggestions has definitely solved the problem.  I bought my new laptop two months ago and have been facing this problem since.  I want a permanent solution.

  See http://answers.microsoft.com/message/6f3aa7c2-feff-4fdd-a9b0-5d10ea4e604b>
   
  W8 comes with built in AV from Microsoft (Windows Defender) solution. You do
  not actually need a third party.
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• My windows live Movie Maker has an ER code 0 x 80004005, cannot display viedo of camer after down load, that its there just will not be open for the show.

  After down loading the camera viedo, it will not be open for show, but it's there, ER (0x80004005) it says Director windows live how I do to reboot?

  Have a look at the last 3 letters of the video you've imported to Windows Live Movie maker (WLMM).
  That the last 3 letters represent the format of the video file. If the format is NOT supported by WLMM, he won't play it.

  Here are the formats supported by WLMM:
  Video files: .asf, .avi, .dvr-ms, .m1v, .mp2, .mp2v, .mpe, .mpeg, .mpg, .mpv2, .wm, and .wmv

  If your video file format is not on the list above, google for a FREE video converter and it allows to convert your video file.
  The best format to convert is WMV. The most reliable and foo-proof format.

  PS, It might be better if you posted in the section photos and videos:
  http://social.answers.Microsoft.com/forums/en-us/vistapictures/threads

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Help, I have a problem with the PS and CC - I get and error measure in PS - "this program cannot start because ONCoreFoundation8.dll - is missing... and it crashes, and now creative cloud will not be open to all."  I spent more than 2 hours to speak to so

  Help, I have a problem with the PS and CC - I get and error measure in PS - "this program cannot start because ONCoreFoundation8.dll - is missing... and it crashes, and now creative cloud will not be open to all."  I spent more than 2 hours to speak to someone in tech support that I did not understand, and I don't know what to do next. The tech gal was run, but once she hung up he returned to broken.  I have an idea, but that's just a guess - trouble started about the time I tried to open On1 of ps there has been a perfect icon effects 9 (for some reason, they decided to add the icon when I got it - I have 8) I clicked it and it loaded the update and then asked me if I wanted to try or buy - that's when I realized that I should have clicked on 8 and tried of back , but is either too late - I think, maybe this dll. 8 or 9 in with perfect On1 effects - and it has changed my settings in PS - and is the reason why it is not compatible - ideas? I have a pc with window7-Carol

  Try to run Photoshop without loading third-party plug-in. hold SHIFT keys when you start Photoshop.  The missing module is not Adobe software.

• Windows Update will not update. Get codes 641, 80070641 and 8004FF01. Fix on Microsoft won't fix it. He said that the Windows Installer is not installed correctly. How can I solve this problem?

  Since May 8, 2012, I have not been able to get updates of thje automatically updated.  It worked fine before the 8th.  I open Windows update and click the update and I have 3 different errors.  The error codes are 641, 80070641 and 804FF01.  I downloaded several times the Microsoft Fix It and it fixed 1 thing ad so I ran it again and he said "No problems need Attention."  But he is not always up to date.  I have 18 important updates and they all failed.  Difficulty he installation of Microsoft Center, I had "an unexpected error has occurred.  Setup cannot continue.  Close, and then try again.  Error: installation of window Service could not be accessed.  This can happen if Windows install is not properly installed.  Contact your support staff. »

  What can I do to fix this problem and make the update of Windows to operate?

  Gwen,

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/Windows-Update-will-not-work-getting-errors-641/dfd4c17e-72c6-47F5-b3fa-6ab64803bbc0>

  UTC/GMT is 23:02 Sunday, July 22, 2012

• Windows 7 will not detect THE routers wireless, including mine.

  Windows 7 will not detect THE routers wireless, including mine. I inserted the cd of restoration of the system, and after that he picked up no internet. No, even if I connect it with the wire! Help!

  Hello

  Thank you for contacting Microsoft Community.
  Is properly installed wireless adapter driver?
  Go to start-> type devmgmt.msc-> press on enter. In the Device Manager window, expand network adapters. You should be able to see a list of network adapter as Ethernet, Bluetooth, etc. Make sure that you can find the adapter wireless from the list. If so, double-click it. Properties windows will be open. On the general tab, under device status, if it shows that the device is not functioning properly, please remove the case, locate the wireless network card and make sure the connections of antennas are coneected correctly. If even a connection is not properly connected or damaged, you cannot connect to any WiFi network.
  Response if the issue is not resolved.

• Windows Vista Service Pack 2 causes the message "Windows install will not be accessible".

  I am running Windows Vista with all the updates installed but Service Pack 2. I uninstalled Service Pack 2 because it was causing problems with the windows installation service. I was unable to install microsoft office update because the windows installer could not be accessed, and Adobe Acrobat Reader could not be repaired or updated for the same reason.

  With installed Service Pack 2, I traveled all troubleshooting for the windows service install. I have a click with the right button on my computer, manage, service and open the properties of windows install. I have activated the service, but still couldn't install the updates Microsoft office or Adobe Acrobat Reader update/repair. I also tried to configure windows install automatic rather than manual when the computer starts.

  I had the problem "Windows install is not be available" for nearly a year. After trying to do a repair Vista boot without result, I uninstalled all updates. The problem disappeared. I decided to install the updates one by one. After you have installed Service Pack 2, the problem with windows install returned. The Service Pack installs completely and then open my computer properties indicates that Vista runs with Service Pack 2 installed.

  Uninstall Service Pack 2 and blocking automatic updates will not install it was my only solution to the issue of "Windows install is not be accessible". I fear that it may cause a security flaw in my computer, however.

  If someone has encountered this problem, and if so, is there a solution to install Service Pack 2 for my windows service install still works correctly?

  Applications, (Norton and McAfee) are known to not uninstall (or upgraded) themselves. Composition of such problems, Geek Squad is also infamous for having failed to download/run the Norton removal tool before installing another AV app or security suite! The 'leftovers' Norton may have caused your post-SP2 installation problem.

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. click right on the file saved in #1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

  5. restart & test (i.e. display SP2 & install it again). [2]

  TIP: Temporarily disable Sunbelt Vipre Antivirus before installing SP2. If you still encounter problems after installing SP2 again, open a free support by my previous response incident.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  [2] How to hide or show an update of Windows Vista

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft