Installation of Windows 8 to replace Windows XP in a HP Pavilion a465c

Similar Questions

• Installation of Windows 8 for the G71316DX Pavilion

  Hi, I have a 64-bit version of windows 8 pro disc that I'm putting on my laptop which has Windows 7 Professional and it doesn't, it's reading the disc perfectly well, but he continues to stop at 46%, either 30% I mean if it's reading the disc very well so I guess is not the driver who is wrong and Yes I downloaded it from the website of HP, any help?

  It turns out that dic was the problem - no idea what happened here, but oh well, it's fixed!

• Installation of Windows 7 Professional on HP Pavilion g6-2394-nr

  Good afternoon...

  My son bought a HP Pavilion g6-2394-nr computer laptop, but couldn't live with Windows 8, so I tried to install Windows 7 Professional (64 bit) on the laptop instead.

  I read some posts on this site regarding doing the same thing with similar patterns of g6 Pavilion and were able to get closer to all of this work, but a problem is just to beat me to death.

  I can't the USB ports work, or get the audio to work.

  Based on the advice I found here, I went on the AMD website and installed the software of catalyst for the processor and also the software for the video card, and they seem to work well.

  Can you please tell me what I should do to get the USB drives and audio to work?

  Here is the information I have at the moment...

  Processor: AMD A8 - 4500M

  Graphics card: AMD Radeon HD7640G

  Chipset: AMD K15 BMI REV 00

  Southbridge: AMD 08 FCH REV 2.4

  Open Host USB of HCD standard controller:

  PCI\VEN_1022 & DEV_7807 & SUBSYS_1849103C & REV_11 PCI\VEN_1022 & DEV_7807 & CC_0C0310 PCI\VEN_1022 & DEV_7807 & SUBSYS_1849103C

  PCI\VEN_1022 & DEV_7807 & CC_0C0310

  PCI\VEN_1022 & DEV_7807 & CC_0C03

  USB root hub:

  USB\ROOT_HUB & VID1022 & PID7807 & REV0011

  USB\ROOT_HUB & VID1022 & PID7807

  USB\ROOT_HUB

  Host USB compliance Test Controller:

  PCI\VEN_1022 & DEV_7808 & SUBSYS_1849103C & REV_11

  PCI\VEN_1022 & DEV_7808 & SUBSYS_1849103C

  PCI\VEN_1022 & DEV_7808 & CC_0C0320

  PCI\VEN_1022 & DEV_7808 & CC_0C03

  xHCI Host controller of compliance Test:

  PCI\VEN_1022 & DEV_7812 & SUBSYS_1849103C & REV_03

  PCI\VEN_1022 & DEV_7812 & SUBSYS_1849103C

  PCI\VEN_1022 & DEV_7812 & CC_0C0330

  PCI\VEN_1022 & DEV_7812 & CC_0C03

  AMD High Definition Audio Device:

  HDAUDIO\FUNC_01 & VEN_1002 & DEV_AA01 & SUBSYS_00AA0100 & REV_1003 HDAUDIO\FUNC_01 & VEN_1002 & DEV_AA01 & SUBSYS_00AA0100

  Any help would be greatly appreciated.

  Hello:

  Install the amd chipset driver and restart.  You want the 3rd file listed (53 MB).

  http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

• How to wipe the laptop Vista Home Premium and replacement/installation with Windows 7 32-bit.

  I am interested in wiping my own laptop (Microsoft Vista) and the installation of Windows 7 32-bit system manufacturer. Can someone help me with this please? Step by step. Thank you!

  Hello

  This should help you.

  Make sure you save all your data before you start this method, because it will be lost.

  And that you remove the existing Partition Vista during this process.

  "How to do a clean Windows 7" install

  http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Before purchasing Windows 7, follow these steps:

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  See you soon.

• Satellite C855 - installation of Windows 7 suspended

  I am trying to install Windows 7 on a Toshiba Satellite 855.
  At present, we have 8 Windows is installed. The computer runs about 05:00 and 23:00 without obvious problems. for example no 'blue screen of death '.
  Secure boot is disabled and the boot mode changed to UEFI to CSM.
  The computer starts correctly on DVD player and the message "starting Windows 7", then on the logo.
  Shortly after, the computer will not quiet i.e. no noise among readers and seems to stop and nothing happens. (we left on during several hours, just in case where)
  Different disks of Windows 7 have been tried with the same result.
  We also tried exchanging the hard drive completely and replacing it with a new drive with no success.
  The computer is now running Windows 8 back without any obvious problem, but we want to run Windows 7!
  Help!

  Have u tried to boot the installer of windows 7 on USB?

• Qosmio G50 12 q - installation of windows 7

  Toshiba Qosmio G50-12 q - whit windows vista Ultimate 32 bit

  I could install windows 7 in replace of windows vista ultimate, unless they prove details incompatibility with device or another drive?

  The Toshiba site is written that the Qosmio g50 with windows vista Ultimate edition is compatible with the installation of windows 7, but a virtual test carried out on the microsoft site to verify compatibility or less has proved to a large number of incompatibility regarding the audio player to feel that they are unable to work once installed windows 7 etc.

  tank you

  Hi Valkyrie,

  I m a bit confused about your ad, but it turns out that the Qosmio G50 supports Windows 7 because all the drivers and tools can be downloaded from the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Check this box!

• Installation of Windows XP on Satellite Pro L20

  Hi all!

  My problem is with a Satellite Pro L20.

  My hard drive broke so I replaced it. Now, when I try and install windows xp pro on the new hard drive, it does nothing. First of all, I put the disk it starts to load and say to support on enter to launch xp installation, R to repair windows or F2 to exit but when I press ENTER, nothing happens if I press R, it starts to look for windows in order to repair, but no windows system cannot be found because it s not been installed but know someone or have any good suggestions on how to get windows installed.

  Any information would be most appreciated.

  I could also just add that when the computer starts first and it s on the first boot of the bit with the Toshiba logo we have 2 options F2 and F12, none of them work when I press them and also when I pressed r in the window xp installation you should be able to type exit, and then enter to leave but some type of keys and some don't but be4 just broken hard drive it typed very well no problem, if it is the problem cos I can't press on enter how fist to solve the problem of keyboard?

  Thank you once more for the reading of my problem.
  Kind regards
  Dave

  I used a panel of USB plug-and-play installation of windows this fantastic worked

  Post edited by: dave1982

• No USB 2.0 driver available for HP p7-1254 (for the installation of Windows 7)

  P7-1254 HP Desktop
  Windows 7 Edition Home Premium 64-bit

  I replaced my hard drive and do a clean installation of Windows 7.
  I already found the drivers from hp.com site, and I am familiar with the order and the process of installing the driver on this machine.

  My problem is; HP seems to offer is more USB 2.0 for downloading drivers.

  USB 3.0 drivers are all that is available for the HP p7-1254.

  So I have two questions:

  1. can I install only the drivers USB 3.0 on a Windows 7 computer, and wait for my USB 2.0 devices to work?

  2. in the case, where can I download drivers USB 2.0 for this machine?

  Thank you in advance for any help or advice you offer.

  Hello:

  Windows 7 has the USB 2 drivers included with the operating system.

  USB3 drivers will only install the drivers for the 3 USB ports.

  You must install the amd chipset driver and restart the computer before installing other drivers.

• New installation of Windows XP does not - UNMOUNTABLE_BOOT_VOLUME

  I'm trying to do a fresh install of Windows XP.

  Soyo SY - P41 845PE Lite MB
  Pentium 4, 2.4 GHz
  1.5 GB of Ram

  This is a computer that I use every day and who usually has a hard drive with WindowsXP SP3. I just want to have a spare hard drive with a new installation of Windows XP on it.

  But installation can not. Usually to auto restart after step 'Copy files' of the installation process. The Windows splash screen appears briefly, and then blue screen message, "a problem has been detected and Windows has shut down to prevent damage to your computer. UNMOUNTABLE_BOOT_VOLUME"followed a few Advisory paragraph which does not apply because the operating system is not yet loaded, then:" technical information: * STOP: (0x8951c900) 0xc0000185 0x00000000 0x00000000. "

  Once he got as far as the Windows Installer screen (one who tells me it will take 39 minutes down left) then a box seemed to read: "Fatal Error. An error was encountered which prevents the installation to continue. Installation failed to install the product catalogs. This is a fatal error. The Setup logs files should contain more information. "Read the Setup log file:" error: the signature for the installation of Windows XP Professional is not valid. " The error code is 80096001. An error occurred during trust verification. »

  Another time, after you press enter in the "WindowsXP installation on the selected element", I INSTANTLY got a screen which read; «An error has occurred during installation has been updated of the partition information on 152626 MB disk 0 at Id 0 on bus 0 on atapi [MBR].» Setup cannot continue. »

  Things, that I already tried that did not work:

  Using two different Windows XP Professional installation disks.

  Withdrawal and tries to install with different RAM sticks in place.

  Two IDE 40 son different cables, which work fine on this computer.

  Two different Western Digital disks hard two test without error using the WD diagnostic utility.

  My knowledge is limited, but that seems to leave only a bad card mother, right?  However, as I say, the computer works well with this old install Windows XP on it. He simply refuses to let me do a new installation on another hard drive.

  What other steps can I take to get a new installation on a hard drive with this computer?

  Thanks to each of you for your attention to my problem.

  I spent $4 on a 80 wire cable IDE (to replace the 40-wire cable I used) and I was finally able to get Windows XP installed today.

  Because I had done installations in the past with the 40 wire cable, I don't understand why it didn't work anymore. I guess the age of the cable, but I actually had multiple failures with a whole new thread 40 I had just bought. A mystery, but at least I now have a new facility and I am inclined to believe the 80 wire will make for a faster computer.

• How can I get an installer for Windows Vista drive?

  Need windows on a drive!

  I have an acer aspire 5315 with OEM windows vista Basic. I want to perform a new installation of this version of windows on my laptop that there have been some problems (multiple annoying windows error codes) and want to start over. I have not provided with an installation for windows cd when I bought this laptop a few years again. I have a license for this laptop windows key but not drive! I am able to get one sent me free I paid initially for windows?  Thanks, Mike

  Hello

  Contact Acer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=Acer

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or ACER Alt + F10 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Windows Installer error - "Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed correctly"

  Original title: Windows Installer could not access
  I am running Vista Home Premium x 64.  Recently when I try to install/upgrade programs up-to-date currently any Apple IE iTunes Quicktime and Safari I get this message.

  Windows Installer service could not be accessed.  This can occur if Windows Installer is not installed properly.

  The window update fails on the stage of the installation.  I have read several threads and tried several fixes, but without success.
  I have disabled/restarted/activated/restarted and switched to manual, auto and back with no success. When I try to force an early Setup, I get the following message:
  The Windows Installer service on Local computer started and then stopped.  Some services stop automatically that they are not in use by other services or programs. 
  I deleted the temp under apps folder.  I copied the reg. Since a sound Vista machine and imported into my machine setup.  I tried again with a reg. offered in one of the sons, all with no change.
  I tried to install version 4.5, but was unsuccessful (it looks like I got lucky there).
  May be related or yet another problem, whenever I have Windows Live Mail, a ope 'preparation for the installation of window lights up for about 15 seconds before disappearing and then my mail opens.
  I don't have a Vista CD.  My HP provides on a partitioned drive recovery files.  There seems to be no usable on my computer restore points.
  Ideas?  Help?
   

  Hello

  What happened when you tried to install Windows install version 4.5? You get an error?

  Follow these methods and check if it solves the problem:

  Method 1:
  Auditor of files (SFC) system scan on your computer. SFCscanwill make Windows replace corrupted or missing system files on your computer.

  Scan sfc enforcement procedure:
  1. click on start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  2. click on continue or provide administrator credentials if prompted.
  3. in the command prompt window, type the following text, and then press ENTER:
  sfc/scannow

  Refer to this article for more information:
  http://support.Microsoft.com/kb/929833

  Method 2:
  After analysis of SFC running, try again to install Windows Installer 4.5 Redistributable.

  Refer to this article:
  http://support.Microsoft.com/kb/942288/en-AU

   

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to perform a new installation of window 8.1?

  Hello

  (If this is important), I use an Alienware X 51 R2 with the following specifications:

  Intel i5 4440U 3.3 GHz processor

  AMD R9 270 2 GB

  8 GB RAM

  1 TB HARD DRIVE

  Basically, my alienware has had many recent accidents before I made my own window installation 8.1 via the USB port. I thought it will run more fast and smoother after I have done, but here are a few problems:

  1 secure Boot product still "no error of Boot Drives Found" as soon as I turn on the computer. So I have to disable Secure Boot.

  2 application opening time is still as slow as before the clean install (i.e. Chrome)

  So, is there a procedure step by step on how to perform a new installation of window 8.1? I want this PC to match at the beginning when I first bought.

  Any help would be greatly appreciated.

  Thank you

  Tin

  You must prepare installation media is to present FAT32 the GPT partition scheme and parameters of the UEFI BIOS with secureboot. See here for more details:

  http://dellwindowsreinstallationguide.com/download-Microsoft-Windows-and-Office/Download-Microsoft-Windows/download-Windows-8-1-retail-and-OEM-ISO/

  You can perform additional steps to clean your drive before installing Windows:

  http://dellwindowsreinstallationguide.com/cleaning-up-a-drive-format-vs-secure-wipe-SSD-and-HDD/

  For complete instructions, see here:

  http://dellwindowsreinstallationguide.com/a-clean-install-of-Windows/a-clean-install-of-Windows-8-1/

  Note You may want to complete execution F12 diagnostic tests to verify the correct materials:

  http://dellwindowsreinstallationguide.com/F12-Preboot-Diagnostics/

  If you want to speed up your system to get rid of the mechanical HARD drive and replace it with an SSD for example the 250-500 GB MX200 Crucial:

  http://UK.crucial.com/GBR/en/compatible-upgrade-for/Alienware/x51-R2

• Installation of Windows 7 has failed due to the graphics card, can not go beyond "Complete Installation".

  Hello, I'm trying to reinstall Windows 7 Professional 64 - bit after an accident which is more allow me to start on the login screen of my previous installation of Windows 7 Professional 64 - bit.  When I try to reinstall the installation hangs and will not finish (even at night) on the stage of "Complete Installation"... ».  During my first install of Windows 7 on this computer I had the same problem and finally worked my way around it by removing the 2 GB of RAM (2 GB installed leaving) and the replacement of my gpu NVIDIA 8800GT with a gpu NVIDIA 8600.  I don't have the right to replace the gpu, and I believe that this issue could possibly be resolved by installing a suitable driver for the 8800GT before starting the installation.  Since I can't start is no longer in Windows 7 in a form in any way, the only option I know is to use the option to load drivers in the system found on the DVD itself System Recovery Options.  When I find the correct driver and install it, it returns the error "failed to install".  I am now at a loss to know what to do because it was the only solution I could think, am I missing something?  If this is not the case, how can I get Windows 7 installed again?  Thanks for any help.

  Hi Limerick,

  Please see the artcle following with some useful information:

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• error 0 x 80040705 occurred during the installation of windows essentials.what to do?

  error 0 x 80040705 is produced during the installation of windows essentials.what do? Help me please.

  Hello

  Thank you for contacting Microsoft Answers.

  This error is caused by a lack of installation of DirectX. Usually some DX files are already installed, but Setup cannot overwrite them. In my case, some of the files in \windows\SystemWOW64 have been accidentally encrypted, and the Setup program does not overwrite them. I had to manually delete these files for the Setup program to succeed. The cause may be different for you, but following these steps should help to understand which files DX are the cause of the problem.
  1. Install DirectX User Runtimes (refreshed June 2010) of http://www.microsoft.com/download/en...ang=en&id=8109
  You will be asked to choose the directory to put the files extracted from the cabin.

  2. run dxsetup.exe from the directory in step 1.

  3. installation failure will probably happen. Look at \Windows\Logs\DXError.log and find the report. INF in the error log file.
  For example:
  [13/07/11 20:36:35] module: dxupdate (Mar 30 2011), file: dxupdate.cpp, line: 2056, function: ExecuteInf
  Has no API: SetupInstallFromInfSection()
  Error: (5) - access is denied.
  Cannot install C:\Users\Foo\AppData\Local\Temp\DXA1BC.tmp\d3dx9_31_x86.inf: [x64_install]. The file is possibly corrupted.
  4. the INF files are files of configuration information, which are used to install the files listed in these. In this example, d3dx9_31_x86.inf is the. INF file. First, try to determine the. DLL file installed with this INF using the name of the INF file and look for a DLL with a name similar to \windows\systemwow64, if you are using 64-bit Windows, in \windows\system32, if you are using 32-bit Windows. In many cases, the name of the INF should tell you what DLL it installs, as shown in the examples below:
  
  xinput1_3_x86.inf install xinput1_3.dll
  d3dx9_33_x86.inf installs d3dx9_33.dll
  d3dx9_31_x86.inf install d3dx9_31.dllif you can't say the name that installs DLL has failed, you will need to watch the CAB file. See \Windows\Logs\DirectX.log to determine what CAB file has been processed before the error. Go to the directory you have chosen in step 1, and then open this CAB file in Explorer file by double clicking it. That will open a window of the Explorer showing the files in the cabin, including a file INF open the INF file, by right-clicking on the file and choosing extractin the menu contextual. The INF file has entries indicating that it installs the DLL as follows:

  [DirectX_System]
  D3dx9_38.dll [DirectX_SysWOW64]
  D3dx9_38.dll
  5. the likely installation failed because this DLL could not be replaced by the installation program. Find out why it could not be crushed and delete it manually from \windows\systemwow64 or \windows\system32.

  6. go to step 2 and repeat until the installation is successful.

  See you soon.

• Tablet WON'T start from any USB drive to the UEFI format unless it has the installer of Windows 8!

  Hello! I've done many tutorials online, which none have worked. Here's my question:

  I am trying to install Windows 7 on my shelf (I have on an another USB drivers). However, I plug it into the dock the Tablet and turn it on and go into the BIOS, and that's where. But when I try to boot from it, the screen flashes and it goes back to the boot in the BIOS. With the help of Rufus, I tried all combinations (TPG for UEFI, MBR computers for UEFI computers, etc.) and none of them work! To test if the USB was defective, I loaded an iso image 8.1 install 64-bit Windows on the drive, and to my surprise, it started from the drive and started the Setup program! I can't start the Windows 7 installation. I tested the stick in my laptop UEFI and it starts very well! What I am doing wrong? Will this work? probably not, but I am bit agitated-e-f (see below)

  1 start from a Windows 8.1 Installation USB key, but by replacing all other files on the disk with the Windows 7 installation version so it force install Windows 7 instead of 8

  System Specs:

  Intel Atom Z3735F @ 1.33 GHZ (Turbo boost up to 1.83 GHz)

  2 GB RAM DDR3

  EEMC Samsung 32 GB Flash storage module

  BIOS: Version 2.16.1242 Aptio Setup utility

  Interesting thing is that in the BIOS, it is said that to enable secure boot (did not you or off), CSM must be disabled. I guess it is, but I can't find where to turn them back on. Site Web de American Megatrend will not let you submit a support ticket, unless you are in a company :|

  Thank you!

  Hello

  I can certainly understand your concern. As it is a problem with the BIOS of the computer, and the preceding troubleshooting steps provided by the Support engineer do not work, I suggest you contact the manufacturer.

  For more information, do not hesitate to contact us. We will be more than happy to help you.