Installation of Windows do not recognize mouse and keyboard

Similar Questions

• ? : Office Windows 10 do not recognize mouse and keyboard

  Hello I am posting this because I looked all around the Internet for a solution without success. I had recently upgraded my office at 10 Windows of Windows 8 and when it asks me to connect to my profile I can no longer use the mouse or the keyboard. My computer is now nothing more than a doorstop $600. How can I fix it?

  I thought about it on mine seeing as how I've renounced. For everyone knows this, go to this site https://www.microsoft.com/en-us/software-download/windows10/ and click on download tool, it's a tool that put the files for 10 Windows on a usb key that instinct ions are below the download link. Once you have it on the usb plug it into the computer made and start in recovery mode. Then click on reset the pc and follow the prompts.
  
  (Note: this is a reset which will make your computer back to the State in which you bought in the store except it will run Windows 10)

• How to fix this upgrade Windows 8.1, my mouse and keyboard would not work after the upgrade

  Good day, I recently updated my OS to Windows 8.1 from the store windows, at the end of the upgrade, I discovered that the keyboard and mouse to my laptop did not work again. I use a HP Pavilion 17, came pre-installed with Win8 and I don't really know how to solve this problem. I restored back the system to a previous date when it was working, at least to allow me use my PC but I get notification of upgrade HP. How can home, I solve this problem?

  Go to the HP support website and search for drivers Windows 8.1 for your specific model number. Also check the recent updates of Windows 8 pilot even if your PC came with Windows preinstalled 8.
  http://welcome.HP.com/country/us/en/support.html

  J W Stuart: http://www.pagestart.com

• When I plug my USB STICK in my computer, I get a message that Windows does not recognize it and it may have malfunctioned.

  I was transferring files from one computer to another and unfortunately made the mistake to put only on the flash drive.  Is there a way to fix my flash drive and save my files?  When I go into the properties of the "unknown device" it says that there is no driver installed; However, when I search the driver updates, I get a message saying that I have the most up-to-date software.   I tried USB to multiple computers and it is not recognized on any of them.  Please help :/

  Hello

  1 are there any changes or updates made on the computer?

  2. What is the full and exact error message?

  3. the other USB devices detected?

  Method 1:

  I suggest that you try to connect to the USB flash drive on another USB port and check if the problem persists.

  Also, try to connect the USB on another computer and check if the flash player works.

  Method 2:

  Check the link and try to run the troubleshooter and check if the problem persists.

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

• Mouse and keyboard does not not on Windows 7

  So first of all, I'm on Windows 7 and all that funcioned normally for like 3 months up to date. Windows updated itself, during the night and restarted... the morning I have the computer completely off and came back in the evening, I started the computer and it started normally, but to my amazement when I tried to move my mouse that she did not move, he was completely frozen... It was a logitec wireless mouse + keyboard set. and yes my keyboard no longer works. I tried to restart my computer and restarting the mouse/keyboard, but nothing. the strange thing is that clearly the keyboard and mouse are funcional because I connected to my laptop and it works fine. In the black screen, when you shut down your computer by holding down the power button, the error screen where it gives you option to start the computer in safe mode or in normal mode, I can use my keyboard to navigate and choose how I want to start the po of the computer by choosing the windows in normal mode starts normally , but once again the mouse and keyboard both do not work. And the same problem in safe mode so I tried to do everything in the menus before starting windows, but nothing works. mouse and keyboard won't work when windows is operational.

  for the moment, I tried everything I could think, I read this forum in full, but nothing works, and since I can't use my keyboard so I can't navigate at all to get the mouse works.

  I tried to use a keyboard with a rope and a different mouse as well but the same problem as with wireless keyboard/mouse. Can someone help me with this problem? It seems that I can't do nothing and it is a 1200 euro computer game with 6 cores... I would like to make it work back

  Hi SilverSepp,

  ·         You connect the USB or PS/2 (Wired) keyboard?

  ·         When you installed the Windows updates?

  ·         There were several updates installed?

  Method 1: Try to use a keyboard or a PS/2 mouse to check the issue. (if available)

  Method 2: Since you cannot use the devices even in safe mode, I suggest you perform a system restore and see if it helps. This will help us also to know the updates have been installed as they become available again.

  Try to perform a restore of the system to WinRe (Windows Recovery Environment)

  a. restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.

  b. use the arrows to select repair your computer in the Advanced Options of Windows Start Menu and press ENTER.

  c. Select System Restore from the System Recovery Options. Follow the instructions.

  See also:

  What are the system recovery options in Windows 7?

  Report of the results.

• Mouse and keyboard does not not to login screen (Windows 7)

  As far as I know, an update of windows was held last night. When I try to log on to my office (gateway), my keyboard and mouse (Logitech M310 K520) do not work. I tried to connect in safe mode, but still no luck. I can press F8 before it connects to enter advanced startup options. I went in the selection 'repair your computer', and my mouse and keyboard work fine. I tried a system restore, run the Diagnostics, memory windows and tried several reboots, but without any difficulty. I have tried other mice, tried different USB slots, but all have the same problems. They work very well until what the login screen and then do not respond.

  Please let me know what are my options to resolve this problem. Would like to try more things on my own first of all, but I'm a bit of a novice in computer science.

  Hello

  I suggest to consult these links and perform the steps:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/mouse-and-keyboard-do-not-work-at-login-screen/7097129d-2a2d-4e13-b7ef-d51300b4acf8

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/mouse-and-keyboard-not-working-at-login-screen/4d759699-f514-4c1d-9ADF-a5724a3ad1e6

  I hope this helps.

• Mouse and keyboard on Sony Vaio laptop does not. It seems, tried everything. (win 7)

  A few days ago, my mouse integrated on my computer laptop everything just stopped working unexpectedly.  I restart my computer and on the login screen, I realized that my keyboard did not work also.  I got my hands on a keyboard and a usb mouse and managed to integrate windows where I tried a restore system since a few days earlier.  When I started my computer, I was greeted with a screen icon and mouse balc.  After having tried everything, I backed up my hard drive and did install a clean windows 7.  My mouse and keyboard still do not work.  The computer recognize my keyboard, but not my mouse, and I tried to uninstall and reinstall the drivers.  I have reset the BIOS, everything.  I should mention that the keyboard works fine in the configuration menu of f2 and f8 one too.  It seems just, nothing associated Windows.  In addition, the mouse and keyboard do not work in safe mode.  suggestions please!  My computer is a Sony Vaio laptop, around the age of 3 months.

  Given that the laptop has just 3 months, get in touch with Sony VAIO support:

  Support for Sony VAIO
  http://eSupport.Sony.com/Perl/select-System.pl?PRODTYPE=1, 24,26,66,9,70,5,72

• USB mouse and keyboard suddenly stopped working

  My USB connected Microsoft USB Bluetooth mouse and keyboard suddenly stopped working today. After researching everything I could, I didall that I could find as a possible solution that has been:

  • Update of the chipsets
  • Uninstalling usb in Device Manager and reboot devices
  • Updated via Device Manager, usb devices
  • Reformatting and reinstalling Windows 7
  • Stop, unplug and allow the card mother "reset".
  • Try multiple ports
  • There is no 'connect' button on my mouse so I can not sure try this
  • Replace the batteries in my mouse
  • Obviously both devices have been connected
  • Updated the software for the mouse

  I have tried literally everything I could think of or read previously and I am out of options. Oddly enough however, after reformatting and reinstalling windows, my USB storage device is found and is working, but the keyboard and mouse are not. Please don't bother not suggest anything I listed above, I obviously already tried and found no chance.

  Update
  I have solved my problem. For later use, if anyone has this problem and no other solution seems not work; That's what I did.

  I bought a USB 2 ports PCI card and installed in my computer, then go back to Windows XP. While my original front and rear USB ports still recognize a flash drive, they do not recognize the keyboard or USB mouse, make ports PCI card. I had also updated ALL the updates of windows on the site, not the auto update available on the desktop. Although I don't know the cause, I am certain that somewhere, something was is altered by the hardware or software, and my default USB ports do not recognize mouse or keyboards.

  Another piece of knowledge in case anyone is interested; I use a card mother gigabyte s-series and my nvidia video card GeForce previously is no longer recognized in the port, it would cause my computer go into a State of hibernation and the monitor would go into "Analog Power Saving Mode". The only solution was to spend a friend with my video card. (Its graphics card is a GeForce 9800 GTX, mine was a GeForce 9800 GT. No reason why it should make a difference.) According to me, even if my computer is less than two years old, I was sold a bad mother. I read online cases in other forums for technical support of people having the same problem. Gigabyte motherboards stop random ports for no known reason.

• Windows 10 does not recognize the wired keyboard and mouse

  When I start windows 10 technical preview my mouse and keyboard do not work.

  they are recognized when I'm in the bios, but when it does start nothing

  keyboard and mouse wired usb

  This is the forum for Windows 7.

• Windows 7 and install/recognize the problems of printer HP LaserJet P2015 error - USB Device not Recognized One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.

  Title: Windows 7 and install/recognize printer HP LaserJet P2015 teething problems...

  I have a dell inspiron that was originally windows Vista and I changed to windows7.  I have a LaserJet where I work, a HP LaserJet P2015 printer and when I plug in the USB, it says (peripheral USB not Recognized One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.

  How and what should I do to get the printer going or to get the computer to recognize.  Installation CD will not work and I looked online and downloaded drivers but still the same thing.

  Hi LOliver,

  Method 1: Run the hardware and peripheral troubleshooting tool and check if it makes a difference.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: Disconnect all USB (Universal Serial Bus) devices connected to the computer (unless your mouse and keyboard). Connect the printer and check to see if the problem persists.

  Method 3: Connect the printer to a different USB port and check.

  Method 4: Reinstall the USB (Universal Serial Bus) controllers.

   First of all, please disconnect all USB devices and then perform the following steps:

  (a) click on 'Start', type device manager in the search bar and press "Enter." If necessary, click on continue.

  (b) in Device Manager, double-click to expand the "USB Bus controllers", right-click on the "host controller", click "Uninstall" and click "OK".

  (c) repeat step 2 to uninstall all items under 'USB Bus controllers'.

   

  Then, restart your computer and windows will automatically reinstall all USB controllers.

   

  HP printer drivers- ensure that you download the driver appropriate for your device model package.

   

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error - "one of the usb devices attached to this computer has malfunctioned and windows does not recognize it

  Original title: USB device not recognized / dysfunction

  "Unrecognized USB device".
  One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it. Help for this problem, click this message. »

  This is what I get AFTER that I had to reinstall windows XP because a virus has attacked my computer a little before avg and Microsoft security essentials picked it up and destroyed... I have reinstalled twice... then I changed discs since I have two... well, I get this message from my 2 external Seagate Freeagent and my Phillips mp3 go gear aria... player these devices work on the laptop from my friend and she is under vista. It seems that since then they have worked on my computer before they would always run. My mouse and my cam work fine and my Canon printer gets thus detected... a few readers who have the space that is made... Ive looked everywhere for a solution... even upgraded windows media 11 and is player went to service pack 3. restarted several times... tried dPower Management tab and tried to

  Open recognition of the USB device by using Device Manager.

  .. I am at a loss: P please help thanks!

  isable the power management of the USB hub and I couldn't find the

  Hi LadyDefi,

  You can try to uninstall and reinstall the USB controllers and check:

  To remove and reinstall all USB controllers, follow these steps:

  a. Click Start, click Run, type sysdm.cpl in the Open box and then click OK.

  b. click on the Hardware tab.

  c. click the Device Manager button.

  d. expand Bus USB controllers.

  e. right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

  f. restart the computer and reinstall the USB controllers.

  g. plug in the removable USB storage device and test to make sure that the problem is solved

  For more information, see the following article:

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error "one of the USB devices attached to this computer has malfunctioned and Windows does not recognize it." when you connect Logitech M225

  Original title:

  My wireless mouse works fine for the last 2 months, now, all of a sudden it doesn't work at all.

  I get a windows notification that says-

  "One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it."

  I have Vista 32 bit OS on my laptop.

  My office has Windows 7 32 bit and I am able to use the mouse on this computer, then the M225 is not defective.

  I tried to look for a download of update on the site of Logitech & only found:

  6.32.20 set - point it did nothing to help.

  I also tried to move the receiver to the other 2 ports USB w / still the same results.

  Are there other downloads or solutions that will help w / this problem?

  You can also try searching for devices strangers (with yellow symbols) in the Manager under the mouse devices and other pointing devices and other devices (if any). Right click and uninstall unknown devices. Then restart.

  Also try the steps below to reset the power of USB:
  (a) the laptop off, unplugged from the wall outlet.
  (b) remove the battery for a few minutes, then reinstall it.
  (c) then restart the laptop.

• I've upgraded to window 10, but not happy with windows 10 I returned to windows 7, but I'm unable to log on to the pc. the pointer of the mouse and keyboard are frozen device, even in safe mode.

  After the upgrade to windows 10, I loved not the style was thus to Windows 7, but I have not been able to log on the PC since. He's going through commissioning, but when on screen password box the pointer of the mouse and keyboard do not respond.

  This happens in safe mode for.

  The PC is a Sony Vaio laptop.

  Any suggestions,.

  John

  Hello Orwell,

  Thanks for posting your query in Microsoft Community.

  You have a Windows 7 installation disc?

  As you cannot start your computer at all, I suggest to run a Startup Repair to repair the damaged boot system files and try to boot into normal mode. See the section: How to use Startup Repair in the following link.

  Startup Repair: frequently asked questions

  If this does not help, try to boot from a disc to install Windows 7 on the Windows recovery environment mode and then try to run the Startup Repair tool and check if you are able to start normally with mouse and keyboard.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• "One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it." Why it does not recognize my device?

  Some time ago I had a huge problem with my computer (I think that my mother-in-law accidentally downloaded a virus) and I took it to a repair shop where they wiped out completely and replaced the hard drive.  Since I got it back when I try to use my wireless mouse and plug the nano receiver he said 'one of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.  Why he says this?  And what can I do about it if anything?  I already tried uninstalling the driver and reinstalling, but that did not work because as soon as I plugged it it again once he says the same thing.  So I don't know what is happening or how to fix it.  Please help me!

  Hi Carla,.

  Please go to the Microsoft Community Forums.
  After the description of the question, I understand that you can not use the mouse on the computer wireless.
  Let me go ahead and help you to question
   
  What is the brand and model of the mouse?
   

  Here are some ways you can follow to resolve the problem:

  Method 1:
  Try to connect to other USB port and verify.
   
  Method 2:
  I suggest for the link and follow the steps in the article:
  Troubleshoot a wireless mouse that does not correctly
  http://support.Microsoft.com/kb/321122#appliesTo
   
  Method 3:
  Remove and reinstall all USB controllers
  Follow these steps:

  a. click Start, click run, type sysdm.cpl in the Open box and then click OK.

  b. click on the hardware tab.

  c. click the Device Manager button.

  d. expand Bus USB controllers.

  e. right click on each device under the Bus USB controllers node and then click Uninstall to remove them one at a time.

  f. restart the computer and reinstall the USB controllers.

  g. plug in the removable USB storage device and perform a test to ensure that the problem is solved.

  
  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• Microsoft Mouse and keyboard Center recognizes not Microsoft Wireless Notebook Optical Mouse 3000 says no device detected

  Original title: Microsoft Mouse and keyboard Center does not recognize my Microsoft Wireless Notebook Optical Mouse 3000'

  My Microsoft Wireless Notebook Optical Mouse 3000 works fine but when I click on it in the devices section and printers on Panel, Microsoft Mouse and keyboard Center does not recognize. It displays the text "No Device detected". Here is a screenshot of what I see:

  

  Hi faignard,

  Thanks for the reply. It is regrettable that uninstall the existing mouse device manager drivers did not help to solve the problem.

  I suggest that you go to the program and features under programs installed and check if there are any associated with IntelliPoint software or any software application related to the mouse installed. In the affirmative, please go ahead and uninstall them and then try to install the driver software IntelliPoint 8.2 in compatibility mode as stated in my previous post dated 22 December 2014. See the following link on how to uninstall program:

  http://Windows.Microsoft.com/en-us/Windows-8/uninstall-change-program

  Please answer us on the State of the question to help you further.