Installation of Windows XP does not see on Satellite Pro P200 HARD drive

Similar Questions

• Windows 7 does not recognize the new WD external hard drive added to the usb port

  Recently, I tried to add my third USB WD hard drive to my computer.  It's a My Book Essential.  The meter turns and the virtual cd drive is listed in WD, but the hard drive itself does not appear on the list of devices with a drive letter.  My my first two books are readers: J:, and L: I have no "new device found" message   I search for new devices and it the PC do not find anything.  If I click on the virtual CD drive (M :) it askes if I want the computer to allow WD to make changes...) I say Yes and the screen flashes and nothing happens.
  The drive be defective?  Any other ideas?

  Hello

  Have you tried to connect the external hard drive on another USB port?

  Try to connect the WD external hard drive on another computer.

  Follow these steps:

  Method 1: You can run the troubleshooter in the following article and see if this fits the Bill.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Also, run the Fixit.
  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2: Check if the external hard drive is recognized in disk management and assign a drive letter to the same.

  To open disk management, follow these steps:

  a. click Start, type disk management in the start search box and press enter.

  (b) if the drive is detected in disk management, I suggest you to assign a drive letter and see if that does the trick.

  For instructions, see this article change, add, or remove a drive letter

• Windows Vista does not recognize external USB 260 GB HARD drive

  I have a 260 GB Seagate external hard drive, a laptop Toshiba satellite and Windows Vista Basic.

  The same Windows usually choose the hard drive when I plug it, it does not appear in Device Manager and in disk management, the only way I can get it to work is to uninstall all the USB root hub and then restart the computer, and then reinstall the USB root hub and plug my hard drive.

  When windows finally recognizes him, the only way to find the driver must choose c:\ manually and there's the search for the computer.
  Works for the time that I have the computer hard disk, but when I stopped it, next time I use the computer, I'm having exactly the same problem.

  I tried to remove the hard drive safely and then close the computer and by him plugging back in after windows has loaded, I tired it connected from the computer and tried to close the computer with connected.

  None of these work.
  Can someone help me please?

  Strange?  :|
  But what need s say Microsoft Windows so I don't expect 100% without bug OS ;)

  Disconnect the USB HDD and remove all the USB ports and Device Manager USB controllers. After restarting again the OS should reinstall ports. Then you could try to reconnect the HARD drive.

• Windows XP does not work when I replace the hard drive or motherboard... ?

  How can I make winxp work if I replace the motherboard or my HARD drive;
  The question another way: I want to install Windows XP on the motherboard so I'll have to take the hard drive and connect it to another motherboard... How can I make because it open of course used... It is is not need any file b4 replacing or anything?

  That may depend on whether you have a copy of Windows XP comes with your PC, to which it might be bios locked the card mother origonal.
  If you have a retail version of Windows XP, you must perform a repair installation and install the new drivers of motherboard
  http://www.michaelstevenstech.com/XPrepairinstall.htm

  If you simply replace the hard drive, you reinstall Windows XP on the new drive, if it is a sata drive, it might be necessary to use the F6 option to install the drivers for the controller sata disks, at the beginning of the installation

• Windows 8 does not see the hard drive on the Satellite A200

  Windows 8 does not see the hard drive on the A200.
  How to install it?

  S strange Windows 8 should already contain the HARD drive controller driver to recognize the HARD drive during installation.
  The HARD drive is visible in the BIOS?

  Do you use the original disc from Microsoft of Windows 8?

• After you install a second WD 1 TB my book drive, Windows Explorer does not see the new drive.

  Original title: Signature Collision?

  I'm having hard to the installation of a second external drive. I use Windows 7 Ultimate RC. There was a WD 1 TB drive My Book already installed - healthy and works very well. The problem occurred after installing a second WD 1 TB my book reader. I followed all the instructions, pluuging the drive to a USB hub. Windows found the disk, installed drivers and reported the new drive ready for use.

  Windows Explorer does not see the new drive. Devices and printers shows 2 external drives from WD. Disk Management shows as 2 drives, but the second disk is offline because of a 'Signature' Collision

  Each player works very well if it's the only drive plugged in. "Eject My Book" does not work because a program (or more) are to use the player in the background (Windows or Norton).

  I installed the latest firmware and I'm still having this problem. I've been emailing WD with this problem and they are running out of ideas.

  Can anyone help?
  Thank you
  Comatose13

  Hello Comatose13,

  There is an old article of KB in Windows XP that has been recently updated with additional measures to solve this kind of problem. The KB covers Windows XP, Windows Vista and Windows 7 with step by step methods. See if that helps.

  http://support.Microsoft.com/kb/330140

  Bobby

• Installation of Windows service does not work after Windows Explorer 9 uninstalling and reinstall Explorer 8

  Installation of Windows service does not work after Explorer 9 uninstallation and reinstallation of 8.  I followed several suggestions on this forum, but still no luck.  I ran the SFC system twice, who told me he had corrupted files.  "Some have been repaired and some might not be."  I then went in the event viewer after a start to the top and he stated that the 'Adobe APM service' is not found.  Also the "hpqddsvc' and the 'gupdate' is not found.  He tries to install something every time I start, but he abandoned.  I checked whether the system is on and disabled.  It's on.  There are a lot of small problems, but my main concern is the Adobe program.  I tried uninstalling and reinstalling Adobe, but still get an error message that the Windows Installer Service could not be accessed. Other suggestions?

  Hello

  I suggest you follow the link and check.

  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer

  http://support.Microsoft.com/kb/2438651

• Windows 8 does not support the prolific usb to serial driver

  Windows 8 does not support the prolific usb to serial driver
  What is the solution?
  We want to use windows 8, but because of this driver issue, we do not buy windows 8

  Windows 8 does not support the prolific usb to serial driver
  What is the solution?
  We want to use windows 8, but because of this driver issue, we do not buy windows 8

  Understand when the manufacturer of the hardware device will provide you with the drivers for the hardware you want to use on the operating system you want to use.  If they aren't - so there you go.

• Windows 7 does not see my Ultrabook XPS14 SSD

  Hello

  My work has receievd 3 Dell XPS 14 Windows 8. Not wanting to release Windows 8 on my users yet... I wanted to downgrade to Windows 7... shot in a disc of Windows 7 SP1 OEM. On the Windows installation and select custom (advanced option) set up does not see my drive. I can't load the drivers because it did not come with any, and on the dell site Web has not listed.

  any help is appreciated!

  Thank you

  Hi Craigomac1,

  This laptop has an option to UEFI boot or legacy. Try to change the setting.

• Satellite L30-105 (PSL33E) Windows Vista does not see the DVD - ram UJ-850 s

  Hello

  I have a Satellite L30-105 (PSL33E) with windows Vista. Windows Vista does not recognize the DVD - ram. BIOS recognize DVD-ram. I tried to download the drivers for the DVD-ram, but they are not on the side of Toshiba.

  Who can help me to get the right driver or learn more? Problems with the carpet * a DVD-ram uj-850 s ATA device and windows Vista.

  Hello

  The CD/DVD drive needs no special drivers!
  Vista includes a Microsoft driver that works with all CURIOUS s (CD/DVD drives)

  Simply said, the Vista should recognize the drive without any problems.

  A few questions; did you get any error messages? What is the status of Device Manager? Do you see yellow exclamation points?

  There is an old way to correct a similar drive problem. It worked on XP then try it on Vista OS.
  It of necessary to update the registry entry
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  1. click on the start menu.
  2. If it is a Vista machine in the search box type regedit without quotes.
  3. look for the registry key mentioned above.
  4. in the right panel you'll see something along the lines of UpperFilter and UpperFilter you want to click on each key filter and tap on delete. Click Yes when asked to confirm if you want to delete the key.
  5. restart Windows.
  6 let me know if it works.

• I can't access my external hard drive with windows 7. How can I get my music out of her files? My pc with xp operating system can access it without problem. but my new pc with windows 7 does not see the hard drive.

  I bought a new pc to replace my old hp 14 months as the motherboard fried in. I bought a case of disk external hard to rocketfish to put the hard drive of my Windows 7 pc in. burned does not see the hard drive. my old pc with xp can access all the items on the external hard drive.

  Check that the drive appears in Device Manager.

  If so, go to disk management and assign a drive letter.

• Installation of Windows XP on TecraS3 with a 320 GB SATA hard drive

  Hallo,
  during the installation of Windows XP on a Tecra S3-SATA hard drive is not discovered.

  Details:
  Laptop: Toshiba Tecra S3, model PTS30E
  Hard drive: Toshiba MK3252GSX 320 S - ATA
  Driver used: raid-drv - 20071023162302.zip (from Toshiba)
  Toshiba-support document: TSB001272

  For the installation of Windows I used correspondent support-Toshiba-document 'TSB001272' the external driver for SATA. The disk with the driver is used for installation, but the hard drive is still unknown.

  PS: The Linux Suse 10.2 installation runs without problem.

  Question: Who knows the good driver for Windows XP? Thank you.

  Manfred Alpers

  > For the Windows installation I used correspondent support-Toshiba-document 'TSB001272' the external driver for SATA. The disk with the driver is used for installation, but the hard drive is still unknown.

  I think you mean this Toshiba document:
  + How to install Windows XP or Windows 2000 on a Toshiba computer with Serial ATA RAID drives.
  http://209.167.114.38/support/TechSupport/TSBs/all/-TSB001272.htm

  Hey buddy the RAID driver can be found on the Toshiba driver page.
  Use this driver as part of the tool called nLite. You can create a new XP CD and could include the RAID driver using this free tool.

  I did this procedure several times and it still worked!

• CS6 does not install on Mac - bad format hard drive - no recourse?

  Hello

  I wanted to install CS6 on my MacBook Pro, but installation is not that the format of your hard drive is supported by case - "case sensitive".

  CS6 refused to install.

  Another way to solve this problem other than to reformat the drive?

  N ° there is no way around this. Adobe apps don't not install on HSFx, only HSF + discs.

  Mylenium

• installation of Windows 7 does not detect drivers for 9500S 3ware RAID controller - 4LP

  I've been using 3ware 9500 s - 4lp raid controller without problem on xp64 os.

  I want to upgrade to windows 7, but after installation clean win7 does not detect my readers as unsigned drivers.

  PLEASE HELP ME!

  Please see: Windows 7 Compatibility Center

• Installation of Windows 7 does not connect to the modem broadband.

  I installed characteristic of two different versions of Win 7 64 on my desktop at different times.

  The two does not connect to my modem. I get error 651. I've tried everything.

  I have consulted my ISP, checked the provider. The installer works fine with other OS and Win 7 on another computer.

  My office tells me that there is no driver installed. There is no driver to install.

  I need a connection to the firmware in the modem to work, something that seems missing from Win 7 Home Premium 64.
  Your background of catch-22
  LCW

  See this previous post/answer

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/error-651-in-Windows-7/65077414-15f8-450b-BD19-5cce9a57fcf0

  PS after I clean installed did you get your motherboard manufacturer system drivers, if a generic desktop computer, or if from a major manufacturer, for example Dell/HP support site?