This virtual machine may have been moved or copied during the priming two different Macs from the external SSD drive

Similar Questions

• Windows media player: Media player can not find this file. It may have been moved or deleted

  Originl title: Windows media player

  I get this message: Media player cannot find this file.  It may have been moved or deleted.

  any ideas on how I can fix it myself?   Microsoft Help player said diagnosis has no problem.  I added an external hard drive later.

  Thanks for your help

  Steve

  In WMP, please enable the column path, right click on a column heading (for example, title) and selecting choose columns. Then check if the path of the songs continue to point to the correct location.

  If they do not, press F3 in WMP to do appear to add to the library and make sure that the Advanced Options appear. Manually add the location of the music files to the list, and then click OK. Who help me?

• Some files have been moved and are inaccessible after installation of Vista Service Pack 2

  For several months, I had been unable to install the latest updates of iTunes, always get the message "Could not access network location %AppData%". Recently, I realized that I had apparently never installed Windows Vista Service Pack 1 or 2 and the practice which finally allowed me to install iTunes 9.2.

  The problem I have now is that one (or two) of these Service Packs created a new profile user labelled 'TEMP' folder and that's where all my iPod apps seem to have "evaporated" to. I say evaporated because iTunes cannot locate, and when I access the folder of the user 'TEMP' (even using my administrator account), I found only a few subfolders (AppData (, LocalLow, Microsoft, CryptnetUrlCache), and those are all empty.  Either way, my administrator user account no longer shows upward at all when I use my 'normal' user code

  Making windows for .ipa files search is the only way I can see same registrants, but then when I try to open the location of file (Mobile Applications C:Users\TEMP\Music\iTunes) I get an error "the location is not available", which suggests that the information may have been moved to another location.

  I am running Windows Vista Home Premium 32-bit, Service Pack 2.

  Support Microsoft offers FREE for Vista SP2 issues support at: https://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034&st=1&wfxredirect=1.  I'm sure they can help you.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• With the help of VM Workstation 8. error when restoring from instant snapshots are not allowed on this virtual machine.

  Hello

  I have takena instant and then try to turn on the machine and get a message:
  "Snapshots are not allowed on this virtual machine!

  When I try to start the snapshot form, I get an error:
  "snapshot restore error, snapshots are not allowed on this virtual machine.

  Can you please help?

  It seems that the configuration (.vmx) file has been deleted (zero byte). I recreated a new you have attached log files. Please replace the file corrupted with VMware Workstation (or at least tab of the virtual machine) closed in order to ensure that the replaced file gets read.

  André

• Can I have macbook start up from my external hard drive instead of the internal HD of the laptop?

  I use a macbook air 2014 model and would like to know if I can boot the mac from an external hard drive rather than the inside. The reason to do this is to save space on the laptop and updates can be installed directly on the external hard drive.

  Is this possible? Forgive me, because I'm not that tech savvy. Thank you in advance!

  Yes. Install or clone of Mac OS X on it and then select it in the pane of the system preferences Startup disk.

  (143481)

• "Sorry, we are unable to access your account. Your account may have been disabled. We recommend that you contact us to discuss this account. "- What should I do then?

  "Sorry, we are unable to access your account. Your account may have been disabled. We recommend that you contact us to discuss this account. "- What should I do then?

  @bell.net

  Contact the @bell.net Support about the issue.

  http://support.Bell.ca/Internet/email

• Error: "it is not possible to disable the connection at this time. "This connection may be using one or more protocols that don't support Plug-and-play, or it may have been initiated by another user or the system account.

  Original title: unable to disable my lan connection

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • I turn off my connection to the local network, it is showing message.

    It is not possible to disable the connection at this time. This connection may be using one or more protocols that don't support Plug-and-play, or it may have been initiated by another user or the system account.

    Please answer soon

    You have problems with programs

  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi MVTDA,

  You can try the following methods and check to see if it helps:

  Method 1:

  a. Click Start and select run, type cmd and click OK.

  b. type net stop cryptsvc and press ENTER.

  c. type ren %systemroot%\System32\Catroot2 oldcatroot2, and then press the Enter key.

  d. restart the computer.

  e. open new command prompt and Type net start cryptsvc, and press ENTER.

  Method 2:

  If the same problem persists then you can try to uninstall the network drivers and check.

  a. click the Start button. Select run, type devmgmt.msc and press OK.

  b. Select the network card and right click on it.

  c. now, select Properties.

  d. in the Properties window, on the driver tab, click Uninstall.

  e. After you have uninstalled the drivers, restart the computer.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• VMware Workstation 6.5 - not enough physical memory is available to power on this virtual machine

  My host is a processor Intel Core i5 (active VT) and 8 GB of RAM Windows 7 64 bit running with hardware virtualization enabled.
  
  Apart from McAfee Antivirus and the usual Windows updates, no other software has been installed on the host machine.
  
  I am running Vmware Workstation 6.5 and I installed 3 popular VM with below guest OS, s/w and memory:
  
  VMware ESX 4-2 GB
  Server 2003 (DC and DNS) - 1 GB

  Server 2003 (vCenter Server) - 1 GB
  
  However, it is not possible for me to all 3 virtual machines run simultaneously. If I turn on Vmware ESX 4 and try to start Windows 2003 VM, it displays the following message:

  Not enough physical memory is available to power on this virtual machine with its configured settings.

  To resolve this problem, set the parameters in additional memory to allow for more virtual memory machine to swap.

  If you were able to on this Windows virtual machine on that host computer in the past, try restarting the host computer. Reboot may allow you to use a little more memory host to run virtual machines.

  Can you get it someone please let me know where are the rest of the memory is busy? Size of total memory of 3 virtual machines are only 4 GB and I have to be able to run all the VMs set 3, but in this case I can't even run two virtual machines simultaneously.

  Please help what should I do?

  With 8 GB of RAM on the host allowing why only 1 GB to be reserved for all you run virtual machines?

• Change tracking (CTK) block is supported for this virtual machine, but was refused. This will increase the CPU proxy and consumption of IOP.

  I have problems with a client of VMware image-level in an EMC Avamar backup.  So far, we have not been able to find information about this message in the backup log file.  It is originally the backup to take a very long period of time (on average 10-11 hours).

  2014-02-28 14:20:57 avvcbimage < 14681 > Info: change tracking (CTK) block is supported for this virtual machine, but was refused. This will increase the CPU proxy and consumption of IOP.

  We cannot determine why CBT is "denied".  Has anyone here run across this issue before or seen any other type of backup VMware image have denied CBT?

  Everything I checked watch that CBT is successfully activated since the file vmx for the customer to the Avamar config.

  ESXi host is Enterprise Plus 4.1.0 260247

  After spending some time on this issue, the ultimate resolution withdrew the Avamar vm and then add it again.  After that, CBT began to work properly.  It seems that there is a parameter that has been 'stuck' pertaining to this virtual machine that wasn't behaving properly.

• From VM copied VMX: "this virtual machine has questions to answer...". »

  I'm trying to start a virtual machine that has been copied from a VM existing and created by initializing the vmx file under a new name of host of VM-comments.

  When you try to start the virtual machine I get the error: this VM has questions to answer

  Steps to generate VMS shown below:

  Buld VM:

  New-VM-name $TargetHostName - VMFilePath $TargetVMXDiskPath - VMHost $TargetVMCenterHost

  Change the name of the network for the network card:

  Get-NetworkAdapter - VM $TargetHostName | Together-NetworkAdapter - NetworkName "test18net."

  Start the virtual machine:

  Get - VM $TargetHostName | where {$_.} PowerState - eq "PoweredOff"} | Start-VM

  The error is generated:

  Start-VM: 23/08/2011-10:48:46 Start - VM VM that has questions to answer before the operation can continue.
  On line: 1 char: 77
  + Get - VM $TargetHostName | where {$_.} PowerState - eq "PoweredOff"} | Start-VM < < < <
  + CategoryInfo: InvalidOperation: (:)) [start-VM], VmBlockedByQuestionException)
  + FullyQualifiedErrorId: Client20_VmServiceImpl_WrapInVMQuestionWatchingTask_HasQuestions, VMware.VimAutomation.ViCore.Cmdlets.Commands.StartVM

  I went to the GUI and he asked me if the server was a copy or? (I forgot the rest of the options) I used the default answer of 'Copy of a VM' in the GUI and was able to use CLI to start the virtual machine.

  How can I autmatically work around the issue, or respond at the start of the VM?

  Only ks once again for all the help!

  Take a look at Re: how to keep or ignore the UUID when you power on a virtual machine

  This discussion addresses the same topic to answer the question if the VM was copied or moved. As to the significance of this issue, see http://kb.vmware.com/kb/1541. Basically, it is about creating a new UUID and MAC address of the VM (I copied it) or keep the same as the source (I moved it).

  André

• Email to advise that my account may have been taken by a person.   is it a genuine request?

  Received an email informing me that my account Apple may have been taken.   Is this a real message?

  Can whant you suggest?

  Probably not, that's what the?

• error message - your backup file is not valid. It may have been deleted.

  When I start my laptop I say error message-"your backup file is not valid. It may have been deleted.' I can't select one that he tells me to do and I can't get it back, what do I do to fix this error?

  Hello

  1. what operating system is installed on your computer?

  2. what file the error refers?

  Method 1: Start in safe mode and check if it helps.

  Windows XP: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Windows Vista: http://windows.microsoft.com/en-US/windows-vista/Start-your-computer-in-safe-mode

  Windows 7: http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode

  Note: make sure to start the computer in normal startup, troubleshooting is completed.

  Method2: Start the computer in a clean boot and check if it helps.

  Windows XP: http://support.microsoft.com/kb/310353

  Windows Vista and 7: http://support.microsoft.com/kb/929135

  Note: make sure to start the computer in normal startup, troubleshooting is completed.

• of the Assembly's strong name validation failed "c:\windows\ehome\ehshell.exr". The file may have been tampered with or it was partially signed but not totally witht the

  media center ehshell.exe received the error message 205 units

  of the Assembly's strong name validation failed "c:\windows\ehome\ehshell.exr". The file may have been tampered with or has been partially registered, but not totally witht the private key

  After you have installed the XP SP3.

  How can I fix this error.

  Media Center worked fine until I installed SP3.

  Hello

  I imagine the inconvenience that you have experienced, but don't worry, we are here to help solve the problem and guide you in the right direction.

  Ehshell.exe is a Windows system file that is used to run Microsoft Media Center. It is not a critical system file. However, the ehshell.exe file can become infected and cause errors trying to run certain programs. If the ehshell.exe is absent, it can also cause errors. Reinstall a clean copy of ehshell.exe with the Microsoft System Restore.

  (a) click on the "Start" menu, then click on "programs". Scroll down and click on "Accessories," then "system tools." Click "System Restore."

  (b) click on 'Next' in the system restore window to view a list of points of restoration which has been archived.

  (c) select a restore point created before the ehshell.exe file becomes corrupt or got deleted. If no restore point until this time is listed, click on "Show restore points more" to select the one that is before this date. Click 'Next' to choose which restore point.

  (d) click on 'Finish' to start the system restore. The computer will restart once the process is complete and the ehshell.exe file is reinstalled.

  If the problem persists, follow these steps:

  You try to run the following commands to re-register all Media Center services:

  (a) close Media Center

  (b) click on the start menu, choose run and type cmd , and then press ENTER.

  (c) in the command prompt, run the following commands to type (or copy/paste) the one at a time and press on enter:

  · Regsvr32.exe atl.dl

  · C:\WINDOWS\eHome\ehl Sched /unregServer

  · C:\WINDOWS\eHome\ehSched/service

  · C:\WINDOWS\eHome\ehRecvr /unregServer

  · C:\WINDOWS\eHome\ehRecvr/service

  · C:\WINDOWS\eHome\ehRec.exe /unregServer

  · C:\WINDOWS\eHome\ehRec.exe/regserver

  · C:\WINDOWS\eHome\ehmsas.exe /unregServer

  · C:\WINDOWS\eHome\ehmsas.exe/regserver

  · Restart the Media Center

  Hope this helps and let us know if you need more assistance. We will be happy to help you.

• of the Assembly's strong name validation failed "c:\windows\home\ehshell.exe". the file may have been tampered with or it was partially signed but not fully signed with the private key, what should I do?

  After I update to Windows XP SP 3 my media center has completely stopped working and it gives me following e: validation failure of strong name for the assembly 'c:\windows\home\ehshell.exe '. the file may have been tampered with or it was partially signed but not fully signed with the private key.

  What I would do.  I was grinding a lot and nothing has worked so far.

  Stone

  Please answer questions following diagnosis in a numbered list type in your very next answer (no need to quote this post):

  1. What is the full name of your application or the installed antivirus security suite and when (date about) is your subscription current expires?  What (other than Defender) anti-spyware applications are installed?  What third-party firewall (if applicable)?

  2 a Norton or McAfee application ALREADY installed on the computer?

  3. do you have a free trial Norton, or a test of free McAfee [a] come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  4. why has not been installed SP3 years?

• Message indicates, this program requires Windows 2000 or greater must be installed in this virtual machine.

  Trying to install a new program and keep this exact error message: "implemented cannot continue." This program requires Windows 2000 or higher installed in this virtual machine. "I have Windows XP, which is higher than 2000, and I do not know how to proceed.

  It is possible that you need XP Pro (not XP Home) installed on your home desktop. You should contact VMWare technical support for this issue. You might be interested in this forum, too:

  http://communities.VMware.com/community/VMTN/desktop/view?view=discussions

  Good luck.