Installation problem in the second installation on the computer at home?

Similar Questions

• My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.

  My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.

  Sync your iPhone, iPad or iPod touch with iTunes using a WiFi - Apple...

• error 1321: NTauthority or Services and controller app sez he has a problem and the computer shuts down

  sez no authority trying to run AVG or Malwarebytes - every 1/2 hour or if some "prog system? NTauthority or Services and controller app sez he has a problem and the computer shuts down

  Hello

  • What is the full error message?
  • What were the changes made to nfore this question?
  • What exactly do you mean by "no authority running avg or malwar bytes?
  It's a possibility that there is a startup program that is launched with a command line and it appears.
  You need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you have finished troubleshooting, proceed as explained in the article to reset the computer to start as usual.

• How can I correct the problem on the computer fan noise laptop vaio sony SA

  How can I correct the problem on the computer fan noise laptop vaio sony SA

  Hi Davidra,

  Download and install if no update is available about the issue using exactly the model of your computer, here: http://esupport.sony.com/US/p/select-system.pl?DIRECTOR=DRIVER

  Try the steps here:

  https://us.en.KB.Sony.com/app/answers/detail/A_ID/34181

  If the problem persists, contact Sony Service support here: http://esupport.sony.com/US/p/service.pl

  Note: If my post answered your question, please mark it as an "accepted Solution".

• I want to be able to solve a problem on the computer of my mother in me. How can she give me access?

  original title: access to another computer at home

  I want to be able to solve a problem on the computer of my mother in me.  How can she give me access?

  You can use windows remote assistance to do this. Consult the following Web site for detailed information

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-remote-assistance-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-Windows-remote-assistance

  http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-your-computer-using-Windows-remote-assistance

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-Windows-meeting-space if this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• an error message appears indicating the pc has a problem and the computer shuts down

  an error message appears saying the pc has a problem and the computer shuts down.

  What do you do when this happens?  It is the way in which computers to protect the components of your computer.

• Photoshop is slow... I have no problem with the computer (windows 8) mine

  Photoshop C5 is a bit slow... no problem with the computer (windows 8.0)

  Hi maxarcitecture,

  Suggest you to reset the settings of Photoshop and then check

  Using Photoshop | Preferences

• Why does my itouch not charge or be recognized by the computer at home

  My iPod touch has not been used for a few weeks and does not load now and when I plug it into the computer at home (Mac) he is not grateful it. The charge lead is fine when connected to another device.

  Try:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer unless the other device that connects has a lower version of iOS

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• log on the computer at home

  I bought the creative cloud on work computer, how to connect on the computer at home. I installed it, but it is still saying 30 day free trial.

  Hello

  Please see the below help documents:

  Applications creative Cloud back in test mode after an update until 2015 for CC

  Solutions to connection errors, activation and connection with creative Cloud applications and Creative Suite

  Kind regards

  Sheena

• I have a problem with the computer work is not correctly after you install the KB2753842 update.

  This update of windows has been installed automatically today (22/12/2012) as the (successful with this date) shows on the Page update.  Since that it has been installed, the computer is constantly read/write on the disc at 100% at all times (i.e. non-stop).  Performance is significantly degraded.  I rebooted several times, whenever the system shows the updates are being configured on tap-dwon and commissioning.  I want to reinstall the update because I think that it was not successful, even if the display update Page shows successful installation.  When I try to find and remove the update under the Panel of control-> program and features-> Windows updates, this update is NOT displayed (latest updates are 13/12/2012).  How can I remove and reinstall this security update?  It is a BIG problem at the moment.  Computer is almost non-functional.  Thnx.

  Original title: update security for windows (KB2753842)

  Nirmal S, thank you.  System Restore did the trick.  I restored prior update checkpoint and then the system automatically re-installed the latest update (which is one I had a problem with).  Problem solved!  My computer working again 'normally '.

  Also, I learned a few new things about the updates and restorations, so...

  Bravo for Nirmal S!

  Kind regards...

• Could get a new router block printing? We had a lot of problems with the computer in the last week and a half. Bought new router and now the printer does not print. :-(

  (1) we went to DirecTV. Then the same day, our internet computer is down. I asked our current provider, Suddenlink, to let them know we had them to another - but we wanted to keep for the internet.

  (2) called DirecTV to investigate why our internet went down at the same time they installed? They said that they did nothing to cause that. We waited 5 days to make out and also install the third TV that was promised. The second tech gave things a lookover and said, once again, that there is nothing unusual during their passage to cause the problem.

  (3) called Suddenlink. They said it was the router. Called the people of Netgear. They said that the router was too old. We needed to pay an exorbitant sum for support and when I told him I'd rather just buy a new router and get free technical support for 90 days... and I personally do not have the credit cards in that time. (it's my mother s equip and I wonder it for the computer) when the guy told me that he could help and hung up on us, even though I was pleading for him to wait until I put my mother on the phone. (I'm in my 40s... not a kid).

  (4) Suddenlink called a few days later, when we got a new router (netgear brand NO!) Installed and I noticed that the 'ready' light was not 'on' on the modem. Their technology has said that he would check and call us in a few minutes. He did not.

  (5) the next day I called Suddenlink AGAIN. This time, I got a really nice customer service agent. She said she would send someone to check on it. It turns out that they had disconnected when I had called to pass only the TV.

  (6) in any case, we are finally online... only now... I can't the printer to work. :-(  This has worked before.  Could it be caused by the different router? I don't know about these things. I didn't even know what it was until someone at Radio Shack has explained to me. (I was not about to buy one at Wal-Mart - these poor people). The printer is a Canon Pixma MX340. We love him. The only thing is that it is difficult to clear the tasks or to reset. The only way to really do that is to simply pull the plug, unfortunately and restart the computer. But hey, it's a great printer, better than HP.

  We are under vista. The router is a Linksys wifi (which we have) N300 model E900.

  Of course I appreciate any help you can give. God bless you!

  Michelle and Ruth.

  Hello

  Thanks for posting in the Microsoft Community.

  I understand that you are facing problems with the printer in Windows Vista.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

  Please follow the steps in the link.

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

• I have a problem with the computer is slow and does not file.

  1 of my pc and 1 another laptop, both with same OS - win 7 starter, atom and same ram and Ghz processor.

  The the Task Manager on the two of them performing at about 50%
  I use wifi and same place,
  always pages on my pc are load too late, manyatimes same gmail takes more than an hour to load or load never at all.
  Live TV on my pc crashes a lot and the clarity of the video is too bad, although the same graphics card, wifi, etc. are used.
  Any recommendation to get rid of these problems?
  2. some viruses had infected my pc,
  I tried to scan my pc and the USB with 2 antivirus free and pay different and even contacted the companies and sent them files. But I got no solution.
  On my pc, the files opens, show that a few errors before you open it then on my cell it do not open at all. Only shortcuts are displayed, while the USB is to have 4 GB of data.
  The companies had scanned all files that are intended for them and had recommended some solutions, but none of them worked and I was faced with the same problems.
  It was queries that I had sent to the antivirus company-
  10-20-bitdefender files that are
  > infected. They were initially on my USB, then I connected to another
  > pc. After that, when I connected to my pc, I scanned and that she was
  > no virus. Then the ameliiecouturiaux and the files whatever i seclect opened in a
  > new window and took that wasannoying time. So I copied all the files to my
  > pc, yet once scanned, formatted my USB and then comes the againNow copiedit the
  > problem - all the icons or folders remain the same with the name of the folders but
  > the files inside this foldergot automatically changed and I lost all my
  > data. Now, I can't find any of my files on my pc or my USB. PL send me
  > an email so that I canattach the files and send them to bitdefender. Dungeon of pl
  > secure these files. Some files have an another new error that I had
  > downloaded. More files will be downloaded once I have bitdefender recieveemail to
  
  > that I can answer. PL copy this message in its entirety and add this to your answer.
  According to my knowledge, 2 of my PC are infected and the virus are not getting detected by bitdefender on my PC1 but 4 threats have been detected on the laptop...

  The same files are include the other way on my other pc.

  Whenever I open the files, save option opens and a new file is saved with the file tha but they never get to open in word or powerpoint, only the backup option is displayed.

  The original files are protected by copyright and are lost. PL help me if possible to retrieve and delete all the files once the inspection is completed. You can forward this message to any authorized person.

  Attached files have changed to 1 or 2 k, but there was initially datas in a few MBs.

  201310131003535. I mentioned that somewhere I had formatted the USB key. Just before that, I had copied all files by selecting CTRL A and cut all the files in a directory on my PC. Then I opened the USB and no files were there. But always around 4 GB has been shown as being busy on the USB stick before formatting.
  My pc takes too long to restart, I tried a few 3 - 4 times and no updates have been installed or waiting to install after the 2nd time but when even he took more time than usual to restart and is compared to the other pc taking 2 X the time to restart, but two of them have installed bitdefender. Problem in my laptop toshiba, not pc lenovo, space time with more than 50 percent on the disk processor and Atom c.
  The files on my USB key are automatically replaced by shortcuts and so files open in a new tab and new cases opened are not those of origin who have been saved by me in this matter. Yet once I formatted and scanned, files, pc and USB but still facing the same USB key.
  Problems-

  1. all files are automatically displayed as shortcuts, even if I had pasted the original file

  2. once I click on open, I get an error and then after clicking on ok, some files get opened

  Before sending the email, I had formatted the USB scanned files on my HARD drive and then copied on the USB. The same problem persists. I think that when the files are displayed or open, the virus does something and change his behavior wrongly.

  1 bitdefender watch as new bitdefender is available, I click ok and repair wire starts and then it tells the system to restart.this cycle continues on the race

  2. 2 files are missing (attachment)

  3. could you send me the file by e-mail?  You can also download the link below.

  http://labs.BitDefender.com/

  because the webste or browsers (chrome, firefox) are not respongding.

  4. I could get these 2 points. Browse your computer to locate the removable storage device and right click

  its icon.
  3. in the shortcut menu, point to Bitdefender and select immunize it
  
  drive.
  I am able to open my pendrive ffrom on 1 pc but on my laptop, all the files don't appear as shortcuts 1-2 KB and can not access.
  zwhwenever, I click the icon, the window save under opens for all files.
  on this pci usingbitdefender antivirus am more 2013 16.34.0.1913 downloaded from download.com and the antivirus from bitdefender 60 seconds. 1.0.3.59
  my pc shows the USB key as safe, but laptop with 2 antivirus mentioned above are showing 2 virus - worm.vbs.ch (bitdefender 2013)
  using bitdefendr 2013 more on laptop, I tried to immunize the file but an error was encountered.
  the error is in German-
  Der process nicht auf die Datei zugreifen kann, da sie von einem other process verwendet wird. I closed all the files and tried to immunize the USB of the my computer without having to open the USB by clicking on it.
  Itried to remoe and atach the pendriveagain and even restarted the laptop, but the same error message appeared.
  Properties - 5.10 GB ref 7.89 GB, but when the USB wasopened, all files were only 2 or 3 KB of size.
  1 more problem-i tried to delete the files in quarantine but bitdefender stopped working and went off automatically.
  I copied all the files from USB to pc, they were 2.22 GB, then again, I copied them back after scannig and formatting of topendrive and it was only 1.44 GB
  BitDefender Antivirus 2013 never works and always displays the message to restart the laptop so that it can start working, but it neverstarts. But bitdefendeer 60 seconds work.

  LOL - install software Registry Cleaner to fix damaged or broken registry entries.

  More likely to worsen the situation.

• Problem authorizing the computer for 1 song

  Hello

  I transfer songs from one Mac to another. All work fine except one. When I try to copy it into iTunes he asks me to authorize the computer. I do this by using the user name and password, but he insists they are incorrect and a copy of the song.

  Someone had the same problem?

  Delete and redownload or reimport if it's free.

  (143724)

• Compaq Presario CQ56: a problem with the computer keyboard laptop presario CQ56

  All keys (F) Act as the FN key is been held down when it is not. This just started today. I have a free prog called "keyboard test utility. Now, I have discovered that I can get 1 clean tap of F4 and the prog to test keyboard shows only illuminated F4. The next time I hit the letter (P) F4 and the Windows key are lit. Now, if I tap the FN key, and then press the F4 key. Again, F4 is the only 1 who turned on the prog of test. It's almost like the FN button nosed. I just to confirm. Rather than hold down the FN key to get things under the keys (F) (as a volume-, volume +, cut and so on). Now, I have to hold down the FN key to get the regular F1 to F12 keys. The rest of the keyboard is fine. A regular toggle switch or a switch in a radio push button. The FN key acts like someone ripped the wires to the back of the switch and reverse the wires and the switch can operate in reverse. Beats me how this can happen to a laptop keyboard.

  Steve

  Hello

  Here are a couple of things to try.

  1. judgment of the laptop.  Disconnect the power adapter and remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  2. try to change the default action of the keys 'f' as follows.

  Shut down the laptop.  Tap away at the esc you key start Notepad to open the Start Menu.  Select the Bios ( f10 ) option, and then change the figure in the document at the following link.

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c02035108 & DocLang = in & docLocale = en_US &...

  Kind regards

  DP - K

• Windows Update causing various problem on the computer

  Original title: bad update?

  11/10, I downloaded and installed updates Vista KB2641690, KB2492386, KB972971644, KB2505189. There is more, but this format makes it very difficult to enumerate. My computer is now constantly lock up, and various closed functions (Explorer being the worst).

  My computer works horribly since the update. Is there a way to reverse the updates, or should I use a fixed disc and just pray that I don't have reinstall?
  THX

  Hello

  Method 1: I suggest you to restore the computer to a point in the update got installed then install the update one at a time to determine the cause of the problem is updated:

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Method 2: You can try to install the updates to the clean boot in order to verify if any third-party application is causing the problem:

  http://support.Microsoft.com/kb/929135

  Note: after a repair, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 3: Try a manual install of update by downloading the update from the Microsoft Download Center:

  http://www.Microsoft.com/download/en/default.aspx

  Note: the number of the KB article in the search box to search for the update.

  Reference: the problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates