log on the computer at home

Similar Questions

• Why does my itouch not charge or be recognized by the computer at home

  My iPod touch has not been used for a few weeks and does not load now and when I plug it into the computer at home (Mac) he is not grateful it. The charge lead is fine when connected to another device.

  Try:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer unless the other device that connects has a lower version of iOS

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• If I synchronize Firefox on my iPhone, can I remove bookmarks on the phone without deleting them from the computer at home?

  I don't want a large number of bookmarks 'House' on my phone. Can you separate the two?

  Hello

  You can't separate them, but you can remove them in Firefox Home without removing them from your computer at home.

  Firefox Home is just a customer and any changes it does not affect the rest of the devices.

  I hope that clarifies the situation.

• ON the computer Vista Home Basic is not able to analyse the updates of the last one year and I already disable the software of MAcafee and stop and start the updates of windows, the cryptographic services, services of BITS. Still, I don't get the resoluti

  With the help of computer Vista Home Basic

  Hi Rupesh Goel,

  Thank you for using the Microsoft answers Forums.

  Solution:

  Follow the steps in the web link below.

  You cannot install some programs or updates.

  http://support.Microsoft.com/kb/822798

  Reset the Windows Update components.

  http://support.Microsoft.com/kb/971058

  That should solve the problem for you.

  Thank you.

  UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO. C

• I changed my computer working group at the computer at home and I don't have password now to open xp. Is my death now of computer for good?

  That's about all. I bought the computer used off someone and he was placed in the mode of group, had no problem. I went there in computer mode at home after using it for years and now I can't go past the password and I don't know. I do not have a xp disk again the software and I'm just wondering if there is a way for me to never come back, or should I throw it in Lake Michigan.

  It seems that if you have fallen into the trap described in the following Microsoft KB article:

  "You can not connect after you remove the computer from the domain.
    <>http://support.Microsoft.com/kb/317049 >

  To make things worse, you have no restore media or you know the login of the user local administrator password. (Not unusual for a computer connected to the domain).  You skate on thin ice throughout uses a password cached for years and finally went through.  At the risk of denying some lucky fish in Lake Michigan a free condo, there is a way that you should be able to recover if your system restore has been activated before the crash.

  First of all, you need to start your machine from a Bootable CD.  You can create one of these for free on another computer.  You can try using Linux Livecd such as Knoppix or try to use a Windows-based rescue CD as freeware Hirens Boot CD.  Whatever way you go, start your computer from this CD.  You then use this system to locate a backup copy of your registry on your hard drive.  You should find one in the following folder:
  C:\System Volume Information\_restore {xxxxxxx...} \RPxxx\snapshot
  Where the s "xxx" refers to the random semi.  Find the directory "RPxxx" just before your blunder.  You will find then five files that constitute the register: in the folder above, they will be called: _REGISTRY_MACHINE_SAM, _REGISTRY_MACHINE_SECURITY, _REGISTRY_MACHINE_SOFTWARE, _REGISTRY_MACHINE_SYSTEM, _REGISTRY_USER_. BY DEFAULT.

  You need to COPY (important: do not MOVE) these five folders for your:
  C:\Windows\System32\Config
  Directory.  After you do this, you will find the corresponding registry files (SAM, SECURITY, SYSTEM, SOFTWARE, by default) in the same Config directory.  Just rename these files from the existing registry (for example, by adding ".bak" in their name) and then rename the files _REGISTRY_ for the files that you just rename.

  Reboot your machine, you should get back to where you were.  If you succeed, you must do two things immediately.  First, create a user local administrator privileges, so that you can yourself bail next time and, second, to make a formal "System Restore" to the last restore point before your problem.  It also wouldn't hurt to change the password for the user: "Administrator" for something, you will know now.

  A more problematic procedure of Microsoft essentially describes the following steps.  If you follow the instructions in Microsoft, boot from the CD to start above and repeat the procedure in part 2, step 6, using GUI to move/rename the files instead of the command prompt.

  "How do I recover from a corrupted registry that prevents Windows XP startup"
    <>http://support.Microsoft.com/kb/307545 >

  ... and if all else fails, just install Linux on the machine ;-)...
  or you can also check to see if you have a recovery partition, which you can use to reinstall Windows.  Find a key, press the first splash screen when you start.

  Good luck
  JW

• Activation of CC on the computer at home and work

  Hey guys.

  2 days ago, we bought a few cc licenses at work that includes a ton of major programs such as PS, ID, Illustrator, fuse and so on.

  I know I should be able to use it on my work computer and also my computer at home as a "backup" since I got a personal license, but I can't seem to make it work.

  At work, all right, but last night I tried to install all the applications at home through the Launcher CC and each of them works now under 30 days of testing.

  It should be noted that it wasn't me who bought the license, but a colleague who invited me to a team 'CC', in my opinion, they called him, where I got my license. Could this be the issue perhaps?

  My work computer is also always on but in sleepmode, and as far as I know that shouldn't be a problem.

  Anyone else had this problem or maybe a suggestion that I can try to do to solve it?

  Thanks in advance!

  Found another thread on the same number and tried the hostcleaner cc, and it worked. If my problems are solved!

• Installation problem in the second installation on the computer at home?

  I have full CC membership on my lap top desk, I registered on my computer at home and installed ony 30 days versions.

  My firewall Windows 7.0 Microsoft 64-bit seems to have stopped all Adobe products work as when I try to open the app asks to connect you as they sit there unable to connect.

  How to install second announced working properly?

  How to CC Abobe to connect to work if Windows security if he stops to connect?

  http://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  Mylenium

• Updates Windows 7 fails to configure and restart on log on the computer.

  Original title: Windows 7 update and logon

  turn on - pc answers with, application update 1827 1827 - then, preparation configure updates of Windows - then, failure of windows updates/returning from changes - then, Shutdown - then start Windows - then, prepare to set up Windows - then, failure to perform Windows updates/revertting configuration changes - then sign on screeen and access.

  This happens at every opening of session since close to 10/10/2010.
  Help

  Hello

  Check Windows Update history, see what are updates installed successfully and which of them are pending or not. To search for updates follow the link

  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  You will have to perhaps download and install the updates manually and check if that helps. Visit the link given below, download the updates that are applicable to your computer by using the KB article numbers.

  http://www.Microsoft.com/downloads/en/default.aspx

  Before installing the update set up your computer to clean the start state. To configure the computer to clean boot state follow the link below

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 7 in the article to start on normal startup.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I get windows32 error when I install a game (cd) into the computer. CD worked on the computer at home ' and last labtop. Help, please!

  install cd games I bought online
  windows32 error

  Hi installin games,.

  Welcome to Microsoft answers forums!

  (a) what is the exact error message that you receive?

  (b) what is the type of your operating system (32-bit \64bit) system?

  I suggest you try the following steps:

  Step 1: Use the Windows Installer Cleanup utility

  Download and then install the Microsoft Windows Cleanup utility. To do this, see the Microsoft Web site:

  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  Save the file to the desktop. When the download is complete, double-click the file and then follow the directions. When the installation is complete, click Start, point to all programsand then click Windows Installer Cleanup.

  In the list of the products installed , delete all entries that are related to the product you have installed wrong. If there are too many entries, click select all, and then click Remove. When you have deleted all entries, click exit, and then start the installation of the product

  290301 (http://support.microsoft.com/kb/290301/) Description of the Windows Install Cleanup

  Step 2: Download and install the latest Windows Installer 4.5

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  Step 3: The clean boot computer and try to install the game.

  http://support.Microsoft.com/kb/929135 ---> how to solve a problem by performing a clean boot in Windows Vista or in Windows 7

  Perform a clean boot (see step 1 in the link); If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  Step 4: Try to run the program in compatibility mode.

  To run the troubleshooting program compatibility Troubleshooter

  1. open the program compatibility problems by clicking on the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under programs, click on run programs for previous versions of Windows.

  2. follow the instructions in the troubleshooting.

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If the problem persists, please consult the manufacturer of the program.

  Note:

  1 make sure that the CD is not bad, scratches or stains on the CD

  2. you cannot run 64-bit on a 32-bit system applications

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I turn on my computer, when I log in, the computer tell me that a duplicate name exists,

  When I turn on my computer, on the start page of the sign, the computer tells me in one or two boxes that a duplicate name exists on the computer. Sometimes, when I'm working on the computer on the bottom right a yellow shield stands up and says that a duplicate name exists. When I click on it. He just disappears. I don't know how to solve this problem. my computer started running real slow at the start of this problem. I don't know not one of my kids did something, but they claim that they have not, please help me solve this problem

  Although you probably solved this problem, the simple solution would be to rename you the computer.

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/sysdm_ident_change_computer_name.mspx?mfr=true

• Untrusted connection error message on the computer at home, but can successfully connect to work

  I've been connecting to this site for some time without problem (a notebook online for school son), but yesterday when I tried to connect from machine at home, got "this connection is Untrusted" error message. However, I was able to connect without problems to work today, but having the same problem at home again. Is this an indication that my home connection is somehow compromised? How can I check? Other sites seem to be working properly.

  The server sends all the intermediate certificates?

  You can check the certificate through a site like this string:

  • http://www.Networking4all.com/en/support/tools/site+check/

• How to open files from the list of contacts on the computer at home, the vcf files

  I exported my contacts list on my computer, it is a .vcf file.  I can open it by clicking on it, but only the first contact is displayed.  This screen looks like a file roledex.  but I don't know how to access other files.  I can open the file with "word" and "excel" vcf and all the data is there, but the result is not reader friendly.

  There is an additional program which allows opening these contacts in a friendly dispay?

  Thank you.

  Doug

  I believe you can do it through Windows live mail.  Alternatively, you can import it into your google account in a web browser.  The advantage to using Gmail, it's that once you make changes you can have them automatically sync them to your phone if you have Gmail on your Droid.

• Contacts transfer Smartphones BB blackBerry to the computer at home

  Hi - I have a new Blackberry Curve 8900, which is loaded with contacts. I backed up the files on the handheld PC via Desktop Manager 4.7.

  How can I read/use the Contacts on my PC at home? Can I open the file with DM4.7? If not can I fill out an address book in Outlook Express? I don't want to "sync" my address book Outlook Express this with BB contacts. I wish I had the contacts of BB as a stand-alone resource on my PC. I think that I could create a new (empty) address book in Outlook Express, but I can't understand how to transfer from your cell phone to the PC.

  Thank you for any light on this question.

  -Frank

  Frank, Hello and welcome to the Forums of Support BlackBerry.com.

  Yes, you can use Outlook Express (and I'm not very familiar with OE), but yes as you can.

  Understand how to create the second profile of OE, as in OE.

  Then using BlackBerry Desktop Manager, click SYNC and open it. In the clock > configuration you can find options to set the program in which the sync function connects... together this and you will be ready to go.

• Switches to color when you restart the computer profile or wakes from sleep

  I bought a Dell Inspiron 1470 with Windows 7 at home as a backup of my MacBook Pro.  I used the Spyder2Express to calibrate my screen that works well.  After that I restarted my PC the color profile has been enabled for a few short seconds, but then returned to the default setting, which is horribly blue and too bright.

  I then removed the color profile created by my Spyder2Express and used Windows' built in the calibration of the monitor.  Yet once, it worked until I rebooted the computer, or he woke from sleep mode.

  I then wen to the control panel-->--> the color management advanced and assured the new profile is the default value of the system.  The problem still remained after the computer is restarted.

  The only solution I have found so far is if after I restarted my pc I go to Panel of--> of color management and select and clear the checkbox "use my settings for this device."  My profile will then return until I restart the next time.

  As a pro photographer, it is a question that is extremely disappointing.  I searched forums, web, called Dell directly and none of this was of no help.  Any thoughts?

  Hi Mike,.

  It seems that software Spyder2Express adds color profile after each reboot. We can check if really Spyder2Express is the origin of the problem
  
  Method 1:
  Uninstall Spyder 2 express and check if the return of the issue after each reboot.
  
  Method 2:
  Configure the computer to boot and then refine the boot entry that is causing the problem
  
  Step 1: Perform a clean boot:
  Note If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.
  a. log in the computer using an account with administrator rights.
  b. Click Start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.
  c. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  d. under the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)
  e. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all.
  Note following this step lets Microsoft services continue to operate. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.
  f. click OK and then click on restart.

  Step 2: Enable half the services
  
  a. click on the Services tab and then click to select the skin all the Microsoft services checkbox.
  b. Click to select half of the check boxes in the Service list.
  c. click OK and then click on restart.
   
  Solve the problem:
  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

  Reset the computer to start as usual:
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  a. Click Start, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  On the general tab, click the Normal startup option, and then click OK.
  When you are prompted to restart the computer, click on restart.

  All the steps above to perform the clean boot is mentioned in the following article
  http://support.Microsoft.com/kb/929135

  Hope this helps,
  A Mir.

• I have Windows XP. How can I start when I connect to the computer, for example open at startup of Firefox?

  At work, I was able to add programs to start so that they would open on their own whenever I logged on the computer. I don't remember how, but want this feature.

  Go to your desktop and right click on the FF icon and select copy.
  Then, go to start / programs, find the folder named Startup and right-click on it. Choose Paste and you're done