Installation / running vSphere on a Windows Hyper-V for test/presentation

Similar Questions

• I run 10 64-bit Windows and I have used iTunes for years. iTunes installs OK, I disable Norton Firewall during installation. iTunes starts OK, but when I try to access the store down ¾ of the page turns black

  I run 10 64-bit Windows and I have used iTunes for years. iTunes installs OK, I disable Norton Firewall during installation. iTunes starts OK, but when I try to access the store down ¾ of the page turns black, the upper band has Taylor Swift and a few small icons to the bottom of the page. If I type Perry Como, in the search box, the page does not change.

  lysdexic01, I know almost exactly what you describe on my screen of iTunes Store recently updated for Windows 7 64-bit. Only difference is that the icons in the black box are invisible until I move the mouse above them, their location by trial and error. Once activated, the icon remains visible. Each found icon flickers at first, but stops flashing if I pass the mouse over it.

  I think that the store is now functional and useless for those of us experiencing this problem. Other users have reported that their iTunes store screen flickers since they updated iTunes to the latest version, but most did not mention the area big black screen that you and I see.

  So far, Apple seems not to believe that there is a problem with the software to update iTunes. It is therefore important that users continue to report these problems to Apple that there are enough complaints for attention even during a week of office party.

• Windows Update program stand-alone installation running - to a standstill

  Windows Update does not work, just hangs.  INSTALLED

  The system for Windows 7 for x 64 systems update tool (KB947821) [October 2014]

  BECAUSE IT WAS NOT LISTED AS AN INSTALLED UPDATE.  This tool is being offered because an inconsistency was found in the store Windows Service that may prevent the installation of future updates, service packs, and software.

  Now Windows Update Standalone Installer running and cannot cancel.

  The windows update worked for some updates on 08/08/16 in the .net framework and MS Office.  It will just be updated, the Windows software.  I have Windows 7 SP1 - came with the laptop.

  Unfortunately, if you visit the page MS lately to download Ko (and a few other KBs) get to cooktop page on the KB still seem to work but when you try to start the download, you might get one of two results:

  

  Or maybe you will see this (but never begin to download):

  

  Which ALWAYS seems to work to get the download is to visit the Microsoft Update that requires using Internet Explorercatalog.

  Copy and paste this URL in the address bar of Internet Explorer:

  http://catalog.update.Microsoft.com/v7/site/home.aspx

  Search for the update of your desire:

  

  Add then the KBs you need to your shopping cart, then view or download the contents of your basket and install it / them.

  See here for more details:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-7-update-problems-read-this-first/28147a5f-B0B0-480b-bed9-834a2da7a375

  So we can suggest a link which could sometimes work perhaps (https://support.microsoft.com/kb/3172605) or we can suggest you to use IE to go directly to the page catalog of update of MS where downloads seem to work all the time.

• When I run wic_x86_enu.exe on Windows 7 Starter, I meet "Installation cannot find what update.inf file needed to update your system.

  wic_x86_enu.exe

  When I run wic_x86_enu.exe on Windows 7 Starter, I meet "Installation cannot find what update.inf file needed to update your system.

  I had already run the windown update, the problem remains.

  Please help.

  Thank you.

  Hi YongWaiMan,

  You can run scanning of the file system [SFC] checker on the computer that will replace missing or corrupt files & see if you can download and run wic_x86_enu.exe.

  For more information, you can consult the following link.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Hope this information is useful.

• during installation I get Lightroom and windows vista no error in charge, but im running windows 7? What should I do?

  during installation I get Lightroom and windows vista no error in charge, but im running windows 7? What should I do?

  I just had to go to the directory "Win Support files" and open the implementation file. Now it's working.

• When you try to run a repair of Windows XP installation I have no option to select R for repair.

  original title: installation of xp home repair

  I'm doing a repair of XP Home installation, but I don't get the option in the settings to select R to do the repair install why is - this? Is there anything we can do about it?

  Hi CharlesQuagliata,

  • What type of Windows XP CD you use to perform the repair facility?

  Check and make sure that you follow the below method to perform the repair installation on Windows XP.

  To perform a repair of Windows XP installation

  (a) Insert your Windows XP CD into your computer.

  (b) restart your computer. If you are prompted, press a key to start from the CD-ROM.

  (c) when the Welcome to Setup page, press enter on your keyboard.

  (d) on the Windows XP licensing agreement page, read the license agreement. Press the Page down key to scroll to the bottom of the agreement. Then, press F8.

  (e) when you are prompted, press R to have Windows XP try to repair Windows by reinstalling important components of Windows.

  The relocation and repair process may take more than an hour. Finally, the installation program invites you to answer the questions as if you were installing Windows XP for the first time.

  How to fix a computer that does not start

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

• VM Workstation - the installation program to run at startup or Windows logon.

  I have a project consisting in the setting up of a PC which will start in VM Workstation or run workstation after a windows login prompt.  What is a good approach to set up such a configuration?  I'm new o this so I thought I'd throw on this issue in the hope of helping to put in place in a minimum of time.  Thank you.

  Nope - obviously not.

  Workstation is a Windows or Linux, program that has always need of the host system to start first.

  I'm doing a Livesystem based on 2 k 3, where it seems that if a virtual machine starts directly - but even here when you do not see a host must be running one in the back

  ___________________________________

  Description of the vmx settings: http://sanbarrow.com/vmx.html

  VMware-liveCD: http://sanbarrow.com/moa.html

• Attempt to start an ESXi host nested of Windows Hyper-V on Windows 8.1

  Hi guys,.

  I would like to start nested 5.5 ESXi hosts in my 5.5 vCenter environment.  I did successfully using 10 Workstation, but I'm having problems trying to do using Windows Hyper-V running on Windows 8.1.  I created a few test servers and tried to start, receive all of them successfully the IP addresses and downloading the image, but they cling to the «travel modules and updated the kernel...» »

  

  If somebody has got away?  Any suggestions?

  dbutch1976 wrote:

  As described earlier in this thread, the host crashes to "move the modules and from the kernel.

  I don't think that the host crashes in fact at this point.  Since the FADT ACPI under Hyper-V has revealed that the VGA is not available, the output is redirected to the serial port.  If you can complete the "blind" installation, you should be able to get on the rest of the installation while providing the necessary responses.

  The question is why the FADT ACPI under Hyper-V claims that VGA is not available, when it is clearly.

• Cannot modify memory and CPU of the parameters on a virtual computer running - vSphere 4

  After a new installation of vSphere 4, I created several virtual machines and P2V had a couple as well.  DRS and HA was set up, and everything worked well.  If I understand correctly, I should be able to change the settings of RAM and the processor to a virtual computer running, but they are greyed out as with previous versions.  I can change them if the virtual machine is shut down.  No idea why this?

  Thank you!

  1 VM should be version 7 of material.

  2. you must set the "Allow memory hot add" powered off mode.

  Only after this, you can add memory to the virtual machine performance. Also, don't forget that Windows 2003 and 2008, Enterprise Edition and Datacenter Edition support this.

  ---

  VMware vExpert 2009

  http://blog.vadmin.ru

• Software to install to run redistributable LabWindows on Window XP?

  Hi all

  I wrote a sort of Hello World of GUI in LabWindows. I need to run his reditributable on Windows XP OS that is not any LabWindows software installed on it. I tried to launch its redistributable on Windows XP; However, I have some errors. How should I proceed? The library files must be installed?

  Thank you

  Kanu

  Hi, Kanu, you cannot simply copy a CVI executable on a new machine to run: the minimum required is to install the runtime engine CVI on the system target; After thet, your software may require some additional component or driver to correctly executed.

  This knowledge base article addresses this issue in detail and explains how to create a distribution kit that installs all the necessary software on the target computer. See also the other links on this page and the sections of online Help article.

• I am trying to run Halo 2 on windows 7 n 64-bit OS. MFPlat.dll problems

  I am trying to run Halo 2 on windows 7 n 64-bit OS. The game installs properly and is registered. When I start the game it says the the mf.dll and mfplat.dllfiles are absent. I downloaded both of dll.com and install in my system 32 file and file of halo 2. The message I get now is that "point of entry" is missing from the file mfplat.dll.

  Hi, Landon5050,

  If you get to the missing file mf.dll errors or any other errors with the mf.dll file, we suggest that you re-install the program, uninstall and reinstall a newer version, or check to see if updates are available for the program associated with the file instead of trying to copy a new version of the file on the computer. File errors are often caused by more than just a missing or corrupt file and copy a single file could cause more problems.

  http://www.computerhope.com/cgi-bin/process.pl?p=MF.dll

  These dll files exist in Windows, but there are also in the Halo installation directory. The equipped versions of Halo are older and is not compatible with Win7.

  Rename the files in your directory of Halo or replace them with newer versions of your directory %windir%\sysWOW64 or % windir%\system32.
  http://www.computing.NET/answers/gaming/Halo-2-missing-DLL/11709.html

  For re - save these files follow this step:

  1. Click Start, click principally made programs, accessories, right-click Guest, and then click Run as administrator.

  2. type regsvr32 mf.dll and then press ENTER.

  3. new type regsvr32 mfplat.dll and then press ENTER.

  There is a patch for this game as well. Have you tried to install the patch and check if it helped.

  Here is a link to download the update for this game.
  http://download.Microsoft.com/download/b/0/e/b0ec1acf-8623-4520-9764-75baaffc0718/Update.exe

  Run this update after the game is installed.   -DivyaR - Support Engineer

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-gaming/Halo-2-missing-DLL-files/def138fb-7b9a-4AA1-BDD5-a6171534aaaa

• I can't get updates since SP2 installation and update of the Windows Update Agent.

  I have Vista Home Premium 64-bit.  I have done 3 installs clean for several days and each time I install SP2 and update the Windows Update Agent I can't get updates.  When I click search for updates, it just keeps looking for hours and hours and never stops looking.  I tried several solutions on the internet, including those found here.  Of course, the first thing I did was run the Fixit of Windows Update tool.  He could not solve any problems found.  He gave the error code 0 x 80070005.  I installed the SubInAcl.exe and run several different command text and a text of the batch.  The batch text did nothing.  The texts of order had errors of syntax and a file, he could not access.  I ran the System File Checker, and it finds errors, it could not fix.  I just did a clean install on this machine 6 or 8 months ago because I was going to get rid of the computer, so when I put in place I used the username user.  I came across no problem at all when I installed the operating system and update everything.  Since then, I decided to keep the computer, so I wanted to have it in my name.  As I said, this is my 3rd try.  I am willing to give.  Maybe someone here can help.

  I tried two clean installs and I get the same thing.  Once I have installed SP2 and the new Agent update, I can't get more updates.  It keeps only the search for hours without results or error messages.  I tried all of the suggestions I found on the internet, but nothing works.  I get always the same error code 0x80070005, when I run the Fixit of Windows Update tool.  There must be a way to solve this problem.  Why I was able to do a clean install of 6 or 8 months without any problems, but now I can't.  It makes no sense at all.  I really hope someone who knows the answer reads this.

  Ralph C.

  I finally got it!  I tried two other proposed solutions, then I ran the System File Checker, which is no problem, then I ran Check Disk.  Check disk found and repaired files in the file system of BITS among others.  After that, I'm now completely up to date with Windows Update.  I was ready to give up.  I'm glad I did not.  For anyone else having similar problems, don't give up, the answer is there.

  Ralph C.

• I've updated my explore since the MSN site and then restarted it said I was running a version of Windows.

  I've updated my explore since the MSN site and then restarted it said I was running a version of Windows. I then re installed Vista with my drive of origin as suggested and created that created an old file from windows to save older files and now it will not recognize the key of the product code.

  original title: reinstalling vista

  From you description of the problem you encounter, the scenario where this can happen.

  Windows vista was preinstalled by an OEM or by using a Volume license installation. The problem does not occur on retail versions of Windows Vista. For example, the problem will not occur if you bought Windows Vista and installed the operating system on a computer yourself. If this is the case with your system

  Solve this problem by referring to the article below.

  http://support.Microsoft.com/kb/935791

  To activate windows vista manually, you can follow the steps described in the links below.

  http://support.Microsoft.com/kb/940315

  I hope this helps.

• My computer is running slowly and some windows flash constantly...

  My computer is running slowly, specifically the internet, and there are some windows (start print, parts of the menu window and touchpad dell) blinking continuously.

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Can I download and run Cardfil.png on Windows 7?

  Original title: I had a program called Cardfile.png. He worked on the latest computers, including XP. I would like to work on this new computer Windows 7 as well with information that is transferred to the new computer. How would I do that?

  How can I download and transfer Cardfile.png on my new Windows 7 computer.  It Schweste fine on XP.

  Hello Eleanor Brown,.

  It's software more alumni who are not compatible with Windows 7.
  If the program is not compatible, then you try to install and run the program in compatibility mode.

  Use the following steps:

  (1) right click on the program

  2) click Properties

  3) click on the Compatibility tab

  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If compatibility is not successful, then try and self-test program compatibility issues:

  1. open the program compatibility problems theStart button.

  Then click on Control Panel. In the search box, type troubleshooting tool, then clickTroubleshooting. Under programs, clickRun done for previous versions of Windows.

  2. follow the instructions in the troubleshooting.

  If you are unable to install a program, insert the installation disc for the program and, using the Troubleshoot utility, navigate to the program setup file, usually called Setup.exe, Install.exe, or something similar. This utility is not designed to work on programs that have an .msi file name extension.

  If you are running Windows 7 Professional or Ultimate version, install Windows Virtual PC and Windows XP mode (http://www.microsoft.com/windows/virtual-pc/default.aspx) and run your software in Windows XP.

  If you run Windows 7 Home Premium, try VirtualBox (www.virtualbox.org) or VMware (www.vmware.com) Player and install a separate copy of Windows XP (family or professional edition) for this purpose. You can find the virtualization software free that will run on Windows 7 Home Premium.

  Please reply back and let us know if this can help.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think