Installation, security and user access

Similar Questions

• Preference system, security and confidentiality, accessibility - not working/empty

  Hello

  All of a sudden my system preference, safety and confidentiality, accessibility access list does not work, it is completely empty/Virgin and I can't use + / either. They do nothing. The + tries to add an app and I can select an app via the dialog box, but the window just shows blank after choosing an app. He never adds anything.

  I reboot several times and turned to cycling as nothing will do. I also zapped the PRAM, still nothing. I also used the Onyx to repair permissions and also checked the disk, everything going perfectly.

  The list never used to be empty, there are several apps listed in there, but they are all gone now. It is completely empty.

  I have problems because the apps that were once, now on the list will not work until I have added to the list, but I can't. I would like to buy yet another application that could control this list, but I don't know of any application that does.

  I hope someone has a solution or an idea of what to do because you have lived the same exact situation.

  I am running 10.11.5

  Thank you

  -Doren

  

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Security and restricting access to an FTP server

  I did a search here on the forums about this and I wasn't able to find a good topic for my questions yet, if there is a debate currently on the forum, please forgive me and I would be grateful for a link. Anyway, my situation:

  I have an ASA firewall and I have never set up an FTP server for a large-scale network (good in my opinion). I want to ensure that we have the highest security level optimal for FTP and restrict only specific users designated by an ACL. SFTP would be the best option available for the security measures? Should I only use the passive FTP mode and range of ports above 1023 do I open for only 1 or 2 FTP clients at a time? Also if I use passive mode do I need to use FTP protocol control?

  In addition, currently, I'm not sure what files need to be available on our network, but the SFTP server always must be installed in the demilitarized zone?

  Thanks for any advice,-Mark

  To activate the SFTP-server on the computer where the data resides is easy, but far not the safest option.

  There are a few more ways to better ensure that. What about:

  -Place the SFTP-server in the DMZ and let this server access the internal server via a fileshare. If someone takes your SFTP server, so it cannot directly a system in the internal network under its control.

  -If the data display, data cannot be copied or synchronized to the DMZ-SFTP-server once the changes.

  SFTP is based on SSH, so it works entirely on a port which is usually TCP/22.

  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  http://www.Kiva.org/invitedBy/karsteni

• CUE 2.3.1 and user access rights

  Is it possible to restrict user rights on the personal Web page of CUE? For example, to keep end users change 0-out option? Thank you.

  No, unfortunately it is currently impossible to restrict to a more granular level. I guess you could use an IP access list for web traffic captured to eliminate completely from/to CUE for some ip addresses/subnets but I don't think that's what you had in mind.

• Security and User Assistance

  I'm looking for information on the security application to personalized in the help Application documents / molten user support.

  There is a setting in the page when creating a custom help that indicates the document responds to security groups, but I don't see any place to set the security group.

  Does anyone have a link to more information on this topic?

  Thank you

  Karla

  Hi Karla,

  Please take a look at this chapter in the book "Common to implement features" to see if it answers your question:

  http://docs.Oracle.com/CD/E56614_01/common_op/OAIMP/F1114491AN28948.htm

  Thank you

  Mr Oliver Steinmeier

  Fusion applications Developer Relations

  https://blogs.Oracle.com/fadevrel

• Account administrator and user, Windows 7 Premium access control problems

  We have a problem with a HP/Compaq Windows 7 Premium machine 4 months old and we cannot allow any request of the UAC.

  An account on the machine is a "Standard user" without password, but when we do something like put to day or what the icon shield it and require permission from the Admin we cannot.  The alert box will appear asking you to Admin password (with no box to type, besides whom there is no account active Admin but maybe only the Super Admin account 'hidden' which is off), but also the 'Yes' button is gray and only 'no' can be clicked.

  Support PC World were unnecessary, saying full install, their stock response.  Tried enabling the 'super administrator' hidden account think it worked once before when I need administrator rights to install the software, but as unable to run CMD prompt as administrator (again because UAC comes into play), I can't seem to do.

  So now stuck with the new machine and messing around on the fighting with the OS: s I thought rightly or wrongly that the activation of the hidden Admin account would do, I'm sure that's what I did before, but I keep hitting the problem guest UAC as described above.  Therefore, the following does not work:

  ______________________________________

  Click Start, type: CMD
  In the results, click on the right button CMD
  Click on "Run as Administrator"
  at the command prompt, type: net user administrator / active: yes

  Log off, and then log on to the administrator account
  Make the appropriate changes to your accounts

  Log on to your account
  Click Start, type: CMD
  In the results, click on the right button CMD
  Click on "Run as Administrator"
  at the command prompt, type: net user administrator / active: No.

  ______________________________________

  I tried to click with the right button on CMD prompt and checking run them as administrator on the drop down menu, but UAC prompt comes up, no luck.  Also tried setting to "Run as Administrator" when raising the properties by right-clicking... same result.

  Also tried cursing at the machine... same result: o

  Any help appreciated because I'm sure that I've done it before, and there is a way to pass the CMD prompt.

  Ah finally solved.

  HP Compaq machines have their own start to use for recovery etc. software (accessible by pressing the ESC key), so I went into the system recovery using the backup utility to make sure that the external hard drive was last week 'missing' files, and then cancelled rather than clicking on the side to supplement a system recovery.

  This gave me the traditional options of safe mode,... networks, prompt etc.  Choose Mode safe mode with command prompt and Super Administrator hidden account was visible as well as the Standard user.  Choose the account super administrator, connected, activated the password protect and define it.

  At the command prompt enter:

  NET user administrator / Active: Yes

  Restarted as Standard and UAC user now works fine.

  It all started because of a need to install Open Office and then down the line a cutting machine, interrupting a Microsoft Backup, which could not be restarted without password Admin and user access control issues as described above.

  Is not to hide the Admin user at all now!

• How end users access vm created on an ESX Server?

  I'm new to ESX and wonder how a user can access a virtual machine created on an ESX Server. Say I create an ESX Server and install 4 XP virtual machines on this subject through VSphere how an end user can get to anyone of them?

  they need to know everything about ESX.  A simple method would be to give them each a name of the PC and using RDP to connect to XP desktop in this way.

  Another way, such as mentioned would be to use VMware View and establishment of a broker for connections and users access their desktop computers through the Client view.

• How do I give users access to the addition of other users and groups in weblogic * without * giving administrator rights

  Hello

  Before opening a SR Oracle for the same problem, just wanted to put it out there to see if we can provide a non administrator user access to the Weblogic administration Console so that it can log and ONLY add users and groups, but not change any setting in the administration console. We offer a personalized access? All grain specific to be accessible?

  Please don't give me the links where it says "give read-only access", giving "monitor."

  read only user cannot add new users/groups in the administration console. The administrator credentials can be provided to that user. It just has to be able to connect, go to security domains > myrealm and add new users and groups. nothing else.

  Please let me know.

  Thank you

  Dan

  Thanks Christian.

• What is error 53? Appears every now and then, followed by a pop up of security indicating denied access.

  Error 53?

  What is error 53?  Pop up every now and then, followed by a pop up of security indicating the access denied... I click ok and it goes away. That's what worry?

  Thank you

  Hello

  Thank you for visiting the Microsoft answers community site. The question you have posted is related to the service of files and folders, and would be better suited in the Technet forums. Please visit the link below to find a community that will support what ask you

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

  I hope this helps.

• Update of security continues to show the shield yellow in the system tray after installation twice and restarted (KB972270 & KB982132)

  Update of security continues to display the shield yellow in the system tray after installation twice and restarted (KB972270 & KB982132).

  YES, thank you! I had installed the most recent Fixit! Just ran disable it Fixit, rebooted, ran the update again and YAY no more yellow shield! Thank you!

  Then, less than a minute later, you posted...

  Thank you, this "fixed"! Ran the Fixit to disable, then ran update again and the yellow shield has not disappeared.

  That one I'm supposed to believe?

• How can I prevent standard users access records personnel administrator for example. photos and documents

  How can I prevent standard users access records personnel administrator for example. photos and documents

  Hello bh51,

  Did you run your antivirus as well as any spyware removal?  As davidhk requested, then you are able to turn sharing off the coast, but it just doesn't work?   I suggest creating a new folder and move the data, and then see if other users are still able to view these.

  Please let us know status.

• I keep getting invited to windows update (vista): security for PowerPoint Viewer 2003 (KB969615) update installs not and displays "error code 4397."

  Security for PowerPoint Viewer 2003 (KB969615) update installs not and displays "error code 4397."

  Please help with installation. After a short period of time, I get a message that there is a problem and it will stop

  Hello

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

  or repost in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Error "have sufficient privileges to complete this installation for all users of the machine. "log on as an administrator and try again the installation" when you try to install iTunes

  Original title:

  I just installed windows7, I had to uninstall itunes in order to complete the instalation of windows7. everything went well until I tried to reinstall itunes.

  During this process, I get the message "you don't have sufficient privileges to complete this installation for all users of the machine. log on as an administrator and try this installation again. ». but I am logged on as administrator.

  Hello

  To resolve this problem, use the following methods. After completing the steps in each method, check to see if the issue is resolved before you go to the next method. If the problem is resolved by any method, you do not have to use other methods.

  Method 1:

  Right click on the installer for iTunes and click Run as administrator.

  Method 2:

  Disable user account control settings and check.

  Enable or disable the User Account Control

  Note: User Account Control (UAC) can help prevent your computer from unauthorized changes. UAC notifies you when changes will be made to your computer that require administrator-level permissions. Disabling it can make your compromised computer. Please make sure that enable you UAC, once you have completed troubleshooting.

  Method 3:

  Allow the default Administrator and try to install it in this user account.

  a.Click on Start, click principally made programs, Accessories, right-click on command prompt and select run as administrator.

  b.Type in the following command and press ENTER.

  NET user administrator / active: yes

  c.Log disable the current user account and log in to the user called Administrator account.

  d.Install iTunes in this default Administrator account.

  e.Once of that installation is complete, the default administrator is disconnected.

  f. log in to your user account.

  g.Disable the default Administrator account. Follow these steps.

  i.Click on Start, click principally made programs, Accessories, right-click on command prompt and select run as administrator.

  II. type the following command and press ENTER.

  NET user administrator / active: No.

• Is anyway having freegate or other applications to use software anti-censorship for Surface RT secure and fast Internet access?

  * Original title: Freegate for Surface RT

  I just bought SurfaceRT last month. I have to go to China for two months and I would use the facebook and youtube for the time I'm here.

  The problem is I don't think the app of freegate in store window. If is anyway to help me find a way to have the freegate or other applications to use for software anti-censorship for secure and fast Internet access.

  Thank you.

  Hi Methawee,

  There are restrictions on access to certain websites in China. Unfortunately, there is no proxy software or against censorship in store Windows.

  I wish that you control with the support of Facebook and YouTube and see if there are ways to access these Web sites.

  Hope this information helps. If you have any other questions, please let us know.

• Console fill with security errors, Keychain Access blocked

  Since I reinstalled El Capitan 10.11.2 from scratch on an empty partition, even before I restore my directory, but after connecting it with my account iCloud, my console fills up with advice like this:

  29/01/16 10:28:31.209 PM launchservicesd [77]: failed to SecTaskLoadEntitlements error = 22

  And which may or may not coincide with the installation of Adobe Creative cloud, I can't allow or always allow on any Keyring guest now, and from 10.11.3, installing I rebooted afloat Keyring prompts and applications broken, which took place immediately after the restart, and just before the installation took over and dropped me to my login prompt.

  EtreCheck version: 2.7.8 (238)

  Report generated 2016-01-29 22:37:38

  Download EtreCheck from http://etrecheck.com

  Time 01:27

  Performance: Excellent

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Another problem

  Description:

  Keychain Access does not allow or always allow all guests.

  Hardware Information: ⓘ

  iMac (retina 5K, 27 inches, end of 2014)

  [Data sheet] - [User Guide] - [Warranty & Service]

  iMac - model: iMac15, 1

  1 4 GHz Intel Core i7 CPU: 4 strands

  24 GB expandable RAM - [Instructions]

  BANK 0/DIMM0

  OK 4 GB DDR3 1333 MHz

  BANK 1/DIMM0

  OK 4 GB DDR3 1333 MHz

  0/DIMM1 BANK

  8 GB DDR3 1333 MHz ok

  BANK 1/DIMM1

  8 GB DDR3 1333 MHz ok

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en1: 802.11 a/b/g/n/ac

  Video information: ⓘ

  AMD Radeon R9 M295X - VRAM: 4096 MB

  iMac 5120 x 2880

  DELL P2414H 1920 x 1080 @ 60 Hz

  Software: ⓘ

  OS X El Capitan 10.11.3 (15 d 21) - since the start time: about 6 days

  Disc information: ⓘ

  SM1024F SSD APPLE disk0: (1 TB) (Solid State - TRIM: Yes)

  EFI (disk0s1) : 210 MB

  Macintosh HD (disk0s2) /: 743,34 go-go (315,35 free)

  HD (disk0s3) [recovery] recovery: 650 MB

  BOOTCAMP (disk0s4) / Volumes/BOOTCAMP: 256,36 go-go (91,86 free)

  USB information: ⓘ

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Apple Inc. FaceTime HD camera (built-in)

  Logitech G9x Laser Mouse

  Apple Inc. IPhone.

  Controller software Valve Steam

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Guardian: ⓘ

  Mac App Store and identified developers

  Kernel extensions: ⓘ

  / Library/Extensions

  [loading] me.hajo.HaHE.Driver (1.0.0 - SDK 10.11) [Support]

  Launch officers: ⓘ

  [loading] com.adobe.AAM.Updater - 1.0.plist [Support]

  [operation] com.adobe.AdobeCreativeCloud.plist [Support]

  [loading] org.macosforge.xquartz.startx.plist [Support]

  Launch demons: ⓘ

  [operation] com.adobe.adobeupdatedaemon.plist [Support]

  [loading] com.adobe.agsservice.plist [Support]

  [loading] org.macosforge.xquartz.privileged_startx.plist [Support]

  User launch officers: ⓘ

  [loading] com.adobe.AAM.Updater - 1.0.plist [Support]

  [loading] com.google.keystone.agent.plist [Support]

  Items in user login: ⓘ

  Helmet of Hajo Enhancer Application (/ Applications/Hajo headphone Enhancer.app)

  The steam application (/ Applications/Steam.app)

  iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  CloudApp Application (/ Applications/CloudApp.app)

  Pushbullet hidden UNKNOWN (missing value)

  EyeTV Helper UNKNOWN (missing value)

  WhatPulse UNKNOWN (missing value)

  VMware Fusion Start Menu UNKNOWN (missing value)

  Hidden Dropbox application (/ Applications/Dropbox.app)

  VMware Fusion Start Menu UNKNOWN (missing value)

  MacUpdate desktop hidden UNKNOWN (missing value)

  Other applications: ⓘ

  [ongoing] 2BUA8C4S2C.com.agilebits.onepassword4 - helper

  [operation] com.adobe.acc.AdobeDesktopService.273312.20BD63EA-FA28-4028-BAE8-C1484E5EA105

  [ongoing] com.Adobe.accmac.273632

  [operation] com.apple.xpc.launchd.oneshot.0x1000002a.1Password 6

  [ongoing] com.Apple.XPC.launchd.oneshot.0x1000002d.brackets

  [ongoing] com.Apple.XPC.launchd.oneshot.0x1000002e.telegram

  [ongoing] com.Apple.XPC.launchd.oneshot.0x1000002f.electron

  [ongoing] com.Apple.XPC.launchd.oneshot.0x10000032.Skype

  [ongoing] com.etresoft.EtreCheck.284832

  [ongoing] com.getdropbox.dropbox.55072

  [ongoing] com.linebreak.CloudAppMacOSX.3872

  [works] com.valvesoftware.steam.280672.84E622EE - 8089-4, 34 C-9ABD-FFA65E493C7B

  [ongoing] com.valvesoftware.steam.ipctool

  IO.brackets.appshell.64992 [loading]

  [operation] me.hajo.Hajo - helmet - Enhancer.65952

  org.CalendarServer.agent [loading]

  org.CalendarServer.archive [loading]

  org.CalendarServer.relocate [loading]

  org.Postfix.master.passive [loading]

  Plug-ins Internet: ⓘ

  Default browser: Version: 601 - SDK 10.11

  AdobeAAMDetect: Version: 3.0.0.0 - SDK 10.9 [Support]

  QuickTime Plugin: Version: 7.7.3

  Safari extensions: ⓘ

  Open in Internet Explorer

  uBlock

  Ghostery

  WOT

  Ultimate status bar

  1Password

  AdBlock

  Adblock more

  3rd party preference panes: ⓘ

  Perian [Support]

  SwitchResX [Support]

  Time Machine: ⓘ

  Mobile backups: OFF

  Automatic backup: YES

  Volumes to back up:

  Macintosh HD: Disc size: 743,34 GB disc used: 427,98 GB

  Destinations:

  Drive airport [network]

  Total size: 2.00 TB

  Total number of backups: 61

  An older backup: 08/29/15, 12:50

  Last backup: 29/01/16, 21:32

  Size of backup drive: adequate

  Backup TB 2.00 size > (disc 427,98 GB X 3)

  Top of page process CPU: ⓘ

  94% Skype

  12% WindowServer

  11% kernel_task

  4% coreaudiod

  Helper (2) steam 2%

  Top of page process of memory: ⓘ

  1.65 GB kernel_task

  1.56 GB com.apple.WebKit.WebContent (13)

  Mds_stores 565 MB

  541 MB SystemUIServer

  Safari of 442 MB

  Virtual memory information: ⓘ

  10.00 GB of free RAM

  2 pm used GB RAM (3.86 GB being cached)

  1.82 GB used Swap

  Diagnostic information: ⓘ

  January 29, 2016, 22:11:39 ~/Library/Logs/DiagnosticReports/Xcode_2016-01-29-221139_[redacted].crash

  com.apple.dt.Xcode - /Applications/Xcode.app/Contents/MacOS/Xcode

  January 29, 2016, 21:15:56 ~/Library/Logs/DiagnosticReports/Polyphone_2016-01-29-211556_[redacted].crash

  fr.polyphone.Polyphone - /Applications/polyphone.app/Contents/MacOS/Polyphone

  January 28, 2016, 20:33:08 ~/Library/Logs/DiagnosticReports/VTDecoderXPCService_2016-01-28-203308_[redacte d] .crash

  /System/Library/frameworks/VideoToolbox.Framework/versions/A/XPCServices/VTDeco derXPCService.xpc/Contents/MacOS/VTDecoderXPCService

  January 27, 2016, 21:26:10 ~/Library/Logs/DiagnosticReports/notedump_2016-01-27-212610_[redacted].crash

  / Users/USER / * / notedump

  January 27, 2016, 21:24:22 ~/Library/Logs/DiagnosticReports/notedump_2016-01-27-212422_[redacted].crash

  January 27, 2016, 21:24:21 ~/Library/Logs/DiagnosticReports/notedump_2016-01-27-212421_[redacted].crash

  January 27, 2016, 21:24:20 ~/Library/Logs/DiagnosticReports/notedump_2016-01-27-212420_[redacted].crash

  January 27, 2016, 21:24:16 ~/Library/Logs/DiagnosticReports/notedump_2016-01-27-212416_[redacted].crash

  January 27, 2016, 21:24:11 ~/Library/Logs/DiagnosticReports/notedump_2016-01-27-212411_[redacted].crash

  January 27, 2016, 21:23:49 ~/Library/Logs/DiagnosticReports/notedump_2016-01-27-212349_[redacted].crash

  January 27, 2016, 21:23:41 ~/Library/Logs/DiagnosticReports/notedump_2016-01-27-212341_[redacted].crash

  January 27, 2016, 21:22:57 ~/Library/Logs/DiagnosticReports/notedump_2016-01-27-212257_[redacted].crash

  January 27, 2016, 21:22:50 ~/Library/Logs/DiagnosticReports/notedump_2016-01-27-212250_[redacted].crash

  January 27, 2016, 21:22:46 ~/Library/Logs/DiagnosticReports/notedump_2016-01-27-212246_[redacted].crash

  January 27, 2016, 21:22:45 ~/Library/Logs/DiagnosticReports/notedump_2016-01-27-212245_[redacted].crash

  January 27, 2016, 21:22:44 ~/Library/Logs/DiagnosticReports/notedump_2016-01-27-212244_[redacted].crash

  January 27, 2016, 21:22:43 ~/Library/Logs/DiagnosticReports/notedump_2016-01-27-212243_[redacted].crash

  January 27, 2016, 21:22:41 ~/Library/Logs/DiagnosticReports/notedump_2016-01-27-212241_[redacted].crash

  January 27, 2016, 21:22:39 ~/Library/Logs/DiagnosticReports/notedump_2016-01-27-212239_[redacted].crash

  January 27, 2016, 20:52:54 ~/Library/Logs/DiagnosticReports/notedump_2016-01-27-205254_[redacted].crash

  January 27, 2016, 20:52:45 ~/Library/Logs/DiagnosticReports/notedump_2016-01-27-205245_[redacted].crash

  January 27, 2016, 20:30:01 pm /Library/Logs/DiagnosticReports/AdobeCRDaemon_2016-01-27-203001_[redacted].cras

  / Applications/utilities/Adobe Creative Cloud / * / emon.app/Contents/MacOS/AdobeCRDaemon creative Cloud.app/Contents/Frameworks/AdobeCrashReporter.framework/Versions/A/AdobeCRDa

  January 27, 2016, 20:29:59 pm /Library/Logs/DiagnosticReports/AdobeCRDaemon_2016-01-27-202959_[redacted].cras

  / Library/Application Support/Adobe / * / Adobe Service.app/Contents/Frameworks/AdobeCrashReporter.framework/Versions/A/AdobeCR Office Daemon.app/Contents/MacOS/AdobeCRDaemon

  January 27, 2016, 20:18:38 ~/Library/Logs/DiagnosticReports/Creative Cloud_2016-01-27-201838_ [redacted] .crash

  com.adobe.acc.AdobeCreativeCloud - Applications/Utilities/Adobe Creative Cloud / * / Creative Cloud.app/Contents/MacOS/Creative Cloud

  January 27, 2016, 20:13:13 ~/Library/Logs/DiagnosticReports/notedump_2016-01-27-201313_[redacted].crash

  Disregard that. Xcode has started to let me authorize code signing request once I left Steam and restart Xcode. It's probably their hooks of interface controller of steam.

  I even had this problem when I had steam allowed in the accessibility section, security and confidentiality.