Security and User Assistance

Similar Questions

• Installation, security and user access

  Ask a question about best practices for deployment.

  We have almost all of the LiveCycle products. All this is now behind our corporate firewall. However we have people from outside of our system which would be beneficial for to connect you to the workspace to initiate processes. By opening up the firewall to the workspace is expose our content management documents and general data security issues? Is there a whitepaper on best practices for security?

  http://help.Adobe.com/en_US/LiveCycle/ES/securityHardening.PDF

• Auto unlock with Apple Watch does not appear in my window security and confidentiality

  "Disable the automatic connection' or Auto unlock with Apple Watch" appears in my window security and confidentiality

  Hello

  Automatic unlocking with Apple Watch is available for the Mac models since the mid-2013 and later running macOS Sierra.

  Check that:

  • Your Mac has Bluetooth and Wi - Fi enabled.
  • Your Apple ID use two factor authentication (as opposed to the two-step verification):
    • For Apple ID - Apple Support two-factor authentication
    • If you are currently using two-step verification instead, follow the instructions here to turn off (under "How can I disable two-step verification?") before you enable two-factor authentication:
      • Frequently asked questions about the audit in two steps for Apple ID - Apple Support
  • Your Mac and Apple Watch are connected to iCloud with the same Apple ID:
    • On your Mac, choose Apple () menu > System Preferences, and then click iCloud.
    • On your iPhone, open the Apple Watch app, then go to general > Apple ID.
  • Your Apple Watch uses a password:
    • On your iPhone, open the Apple Watch app, then type the access code.
  • Transfer procedure is enabled on your iPhone and your Mac:
    • On your iPhone, go to: settings > general > transfer procedure.
    • On your Mac, go to: System preferences > General - down, tick the option "Allow transfer between the Mac and your iCloud devices."
    • If these parameters are already enabled, a user has found that it helped to deactivate and reactivate the procedure of transfer on their iPhone.

  More information:

  Automatically unlock your Mac with your Apple Watch - Apple Support

• Can not unlock security and confidentiality

  I have my mac set up with three users, all with ADMIN rights, and none were of passwords.

  In users and groups, I can click on the padlock and just press enter (do not enter a password because the account is not a) and the lock unlocks as expected and I can make changes.

  If I go to security and confidentiality and do the same thing to unlock the padlock and make changes, nothing happens.

  Any suggestions on how to fix?

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• I forgot my microsoft internet security and acceleration server password and username

  I forgot my user name and a password for microsoft internet security and acceleration server

  Hi Tom,

  Unfortunately, we are limited in what we can do to help with password lost or forgotten by Microsoft Policy, which applies to anyone who answered questions here. http://support.microsoft.com/kb/189126.  But there are a few options to try:

  You have another administrator account where you know the password that you can connect to the password changes to this account?

  First of all, make sure that you do not have the CAPS LOCK SHIFT keys or Numlock enabled - this can change what you think, you type in something else (different case or a number or a letter) and the system see what you entered as incorrect.

  Second, if you have another keyboard, you can use with the computer, try to do this. Maybe it's that one of the characters of your password is not working properly on the keyboard or the keyboard is inserting extra spaces or something else that makes you think that you enter won't be not what you're really in.

  Unfortunately, if this does not work in this case the only option, we can suggest is to restore the system to factory conditions (or do a clean install). But too late for this time, next time create more than one administrator account in order to have a backup in case something like this happens again. A new installation will create a new administrator account. It allows to do some backups to avoid that from happening.

  I'm sorry, that we cannot do more to help.

  Good luck and best wishes!

• I am currently running windows essentials security and avast antivirus and antispyware protection security - is enough? I need Mcafee or Norton or are they the same thing?

  What is the best protection virus out there - see my present programs

  You should not run two antivirus programs. Microsoft Security Essentials versus Avast Security and uninstall what you don't want. With a good antivirus and the built-in Windows Firewall on XP I wish I had the free version of Malwarebytes' Anti-Malware installed. Update/run it manually once a week or more. You don't need anything else except a smart user.

  http://www.getsafeonline.org/
  https://www.mysecurecyberspace.com/
  http://www.GetNetWise.org/
  http://www.elephantboycomputers.com/staying-safe.PDF

  Too much security is detrimental:

  http://www.elephantboycomputers.com/Too_Much_Security.PDF

  MS - MVP - Elephant Boy computers - don't panic!

• How to clean my computer of saved passwords and user names?

  How to clean my computer of saved passwords and user names?

  Original title: I'll sell my computer

  You must wipe the drive and reinstall the operating system. 
  Unless you want other snooping in your files you need more than just delete your user names and passwords from different places on the computer.

  Do not wipe the recovery partition.  The recovery partition is a small part of the disk that contains the files needed to restore the computer to factory State, see the computer user's manual or check the manufacturer support site for the from.

  Secure erase
  http://CMRR.UCSD.edu/people/Hughes/SecureErase.shtml

  Reinstalling the operating system will take care of the major PART of the problem, but to be completely safe, you may want to replace the hard drive.

• Recently, I did the update of security and had 17 updates to install for Windows Vista Home Premium SP2.

  Recently, I did the update of security and had 17 updates installed.  After installation I closed the computer for the day.  The next time that I started it upward, I received a stop error message 0x81ecbe79 and he started a reboot loop and I kept getting error code 0 x 81 different whenever it restarted.  The first 4 digits are the same with the rest changing with the exception of the 79 at the end.  So far he has done about 30 times until I finally stopped him frustration.  Also sometimes it would ask if I wanted to check on the web for a fix, but he continued the loop.  The loop stops at different places during the boot sequence.  Once he got almost completely before it restarts and a couple of times, it was in the screen of welcome and rebooted.  Is there a fix or do I have to do a clean install?  The way it is now I'm not sure that I can make a back up of my wife's Family Tree Maker files and get it all.

  1. try to restore the system and if necessary a startup repair.

  2. data recovery.

  3. where questions of Windows updates.

  1.

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  2.

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  3.

  Windows Update Forum:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Passwords and users of AAA

  Hi all

  I am currently a student at my CCNA Security and have been playing around with AAA. I have a 851w with advsecurity 12.4 IOS.

  What I noticed and found interesting is that I seem to have a user configured locally, but it seems to have two passwords.

  For example, if I login with SSH or telnet, I get my user name with password 'ABC' and I'm in. This account is the privilege level 15. However, if I have access to the SDM, I enter the same username with a different password, for example '1234'. If I get the password 'ABC', who works for SSH and telnet, I do not get access.

  I was wondering if someone can explain this? I tried using the aaa show commands to see what happens, but it doesn't seem to help. As I said, aaa uses the local database for its database of the user. Here is a config.

  Any help much appreciated.

  See you soon,.

  Conor

  AAA new-model

  AAA authentication login default local

  NO_LOGIN AAA authentication login no

  AAA authorization exec default local

  AAA - the id of the joint session

  username privilege 15 secret 5 Bonneau conor

  Line con 0

  exec-timeout 300 0

  privilege level 15

  password 7 Bonneau

  Synchronous recording

  authentication of the connection NO_LOGIN

  no activation of the modem

  line to 0

  line vty 0 4

  exec-timeout 300 0

  privilege level 15

  password 7 Bonneau

  Synchronous recording

  Hey conor,.

  You can go through it:

  https://supportforums.Cisco.com/docs/doc-4643;JSESSIONID=0C19A82CCA5D05A3AF75ED6BBDC1530A. Node0

  HTH

  JK

  Please evaluate the useful messages-

• How to create user defined groups and users with custom permissions as only open and export in obiee 11 g?

  Hello

  I want to give as open & export to the level of permissions.

  How to create user defined groups and users with custom permissions as only open and export in obiee 11 g?

  For example, if the group permissions, inturn should reflect on the users.

  Please help me.

  Thanks in advance,

  A.Kavya.

  Your question is quite broad and fuzzy then I suggest the security catalog presentation to read documentation: http://docs.oracle.com/middleware/1221/biee/BIESC/mgrgrpsusers.htm#CIHIBJGD

  And I think that you mix you two things which are managed in different places:

  ) an object as read access permissions, write, delete... which control you through the object "Permissions" dialog box

  

  

  (b) functional privileges controlled through "Manage privileges" under "Administration".

  

• Portal of WC - need information about the Migration or DB tables for roles and users/groups.

  Hello

  We are to modernize the WebCenter portal for a client of 11.1.1.3.0 to 11.1.1.8.0.

  Anything can let me know the procedure of migration or the involved DB tables that store the roles and the "user groups &" under the administration of security.

  A manual level by recreating all roles and users and groups one by one is my last option.

  Thank you

  Jean Claude

  Hello.

  Do not recreate it manually.

  The documentation must guide for PS2 - PS7 migration explaining step by step what to do regarding the security / policies.

  Read it slowly and carefully.

  Using WLST backup/export/import of your policy store scripts / qualifications.

  Following links can help you understand the WLST Scripts for the migration of security:

  http://docs.Oracle.com/CD/E29542_01/core.1111/e10043/addlsecfea.htm#JISEC3639

  Custom security infrastructure controls WLST - 11g Release 1 (10.3.6)

  We have migrated many times of 11.1.1.4/5 to 11.1.1.8. Always on the PS3 (11.1.1.4) version.

  11.1.1.3 to 11.1.1.4 was the biggest change from my point of view. I never had the opportunity to PSx PS2.

  For migration tasks, my recommendation is to ask for doubts or things not clearly in Support of Oracle documentation.

  Kind regards.

• Portfolios - what is the difference between the password, certificate of security and management of the lifecycle of the rights Adobe?

  I would like to use Acrobat DC Pro to create secure portfolios. These will be used to store payable files that should not be considered by most employees. What is the difference between the password, certificate of security and management of the lifecycle of the rights Adobe?

  Password encryption methods, certificate of security and Adobe lifecycle management of the rights for the portfolios are the same as for a single PDF file. If you are a novice to the encryption Acrobat Adobe Acrobat X Pro * choosing a method of security will help. You can have the portfolio itself unencrypted and encrypt some or all files with whatever method you choose, or encrypt the portfolio himself and, still encrypt or not encrypt files that you place in the portfolio. Each encrypted file can use the same or different encryption with the same or different credentials method. You can encrypt portfolio encrypt attachments only. In this case the portfolio itself is not encrypted, but all the files in the portfolio are encrypted with the same method/diploma. When a user opens this portfolio list of files appears. When the user clicks on a file in the list Acrobat checks credentials (in the case of password security, he asks the password) before opening the file.

• How to set up the security and Notification

  Hi, I developed a small application for logging calls. I would like to know the procedure of implementation of security and notification settings.
  
  As I am new in this area, please explain in detail. Screenshots showing the configurations ([email protected]) would be highly appreciated.
  
  The main features and the application procedures-
  
  (a) users will see different usernames and passwords to trigger calls on a particular service
  (b) each Department has a call manager that will assign the call to a technician
  (c) the technician will solve the call and update status
  (d) the user will close the call and provide feedback
  
  Structure-
  
  1 table to keep users / employees - 1 Page - report and form
  1 table to manage call manager Department wise - 1 Page - report & form
  1 table for calls (stimulus, assign, resolve) - report and our multiple pages (one for the recording, one for the assignment, to solve and feedback with only the corresponding columns of the table) - I have created multiple forms, whereas a call can only be changed by a subsequent user)
  
  My requirement:
  
  1. the user must consult only the calls raised by him or her (User1 should not see the calls raised by user2)
  2. the technician should show the call triggered by her (user role) and can also view calls assigned
  3. the call manager can check the calls raised by him (user role) and can also show calls raised on his Department
  4 notification: email should be fired in each event only for the persons concerned, added to the call (the user handler calls, technician)
  
  
  Please guide me to implement the features above.
  
  Kind regards
  Sandeep

  sandeepmallik wrote:
  Thanks for the reply.

  About the e-mail notification-, we can create a process under 'Treatment of the Page' for email. In the field 'To' we can provide the string id or replacement of static mail to send mails.

  Not recommended. When generating the e-mail notifications in the way that you need to modify data and sending of the email must be processed in the same transaction to ensure that you don't have change without email or email without modification. Where the suggestion of creating packages of procedures that encapsulate these transactions.

  There are a number of non-obvious events which will cause the APEX to issue a commit which will close a transaction. So, you want all of your transaction in a program unit, called within a single process to the APEX. Packages are the best way to do it.

  How to create the substitution string so that we can get the mail electronic id of the table using SQL? We use several channels alternative if we want to send the same mail to multiple recipients?

  Use apex_mail API with varying normal SQL and PL/SQL in your procedures.

• Security and connection string

  Hello

  I am a new developer using ColdFusion.

  ColdFusion supports Windows authentication, or I must have my connection in plain text string in my cfm files?

  I have the connection string in my form, alone or in a configuration file?

  Is it possible to encryption of my password and username in the cfm file?

  Your information and your help is much appreciated,

  Kind regards

  iccsi,

  It's a broad question.  You referring to connections to data sources, or recognizing the user for connections of site IDs?  If the first case, you can configure connections to database (with some reservations) in the CF Administrator secure and never have to pass the credentials directly in your CFML code.  In regards to the user for the connection ID, if you configure your webserver (IIS) to use Windows via NTLM authentication, Coldfusion will receive the Windows login and make accessible to you through CGI variables.

  -Carl V.

• data tables store information of groups and users?

  Hi all
  
  I want to export all the information of users and groups on the Administration of BI tool. only I can copy them one by one. are there other methods?
  who knows what data tables store information of groups and users?
  
  Thank you
  Dan.

  Hi dan,.

  As you can not access the link which is very informative. Never I've implemented it but john's suggestion, it should work

  Courtesy John: -.

  OBIEE get all RPD users
  I had to get all the users a repository very large because they where to implement a new security model. Wrote a small script to make life easier:

  ' Read_Users.VBS
  "John Minkjan
  "http:// http://www.obiee101.blogspot.com/
  ' Get all the users from a repository
  1: do an export the PRD UDML using nqgenudml.exe
  2: change the location/name of file in this script
  3: run the script in the cscript Read_Users.VBS command line > users.txt
  Set objFSO = CreateObject ("Scripting.FileSystemObject")

  "this point your EXPORTSet UDML
  objFile = objFSO.OpenTextFile ("E:\names.txt", ForReading)

  Const ForReading = 1
  Dim arrFileLines()
  Dim strRLinedim strTemp1dim strTemp2

  I have = 0

  Up to objFile.AtEndOfStream
  strRline = objFile.ReadLine
  If left(strRline,12) = "USER to DECLARE" then
  ReDim Preserve arrFileLines (i)
  arrFileLines (i) = strRline
  i = i + 1
  end if
  Loop

  objFile.Close
  "Then you can iterate over it like that"
  For each strLine in arrFileLines
  strTemp1 = MID (strLine, 15: 50)
  IF instr (strline,"}" ") > 0 THEN
  strTemp2 = MID (strLine, instr(strline,"{") + 1, (instr(strline,"}") - (instr(strline,"{") + 1))) ELSE strTemp2 = «»
  END IF
  WScript.Echo MID (strTemp1, 1, instr(strTemp1, """)-1) &"; '& strtemp2 '.
  Next

  OBIEE get all users and roles of RPD
  In this http://obiee101.blogspot.com/2009/06/obiee-get-all-users-from-rpd.html post I showed you how to get users to the RPD. That take as a point of departure it is a small step to get users and roles they have and put the export in a XLS:

  ' Read_Usergroups.VBS 'John Minkjan' http: / / http://www.obiee101.blogspot.com/
  ' Get all the users from a repository
  1: do an export the PRD UDML using nqgenudml.exe
  2: change the location/name of file in this script
  3: run the script in the cscript Read_Usergroups.VBS command line > users.txt
  4: put the export in a pivot table XLS

  Set objFSO = CreateObject ("Scripting.FileSystemObject")
  "this point your EXPORT UDML
  Set objFile = objFSO.OpenTextFile ("E:\usergroup.txt", ForReading)
  Const ForReading = 1
  Dim arrFileLines()
  Dim strRLine
  Dim strTemp1
  Dim strTemp2
  Dim strTemp3
  Dim intRoles
  intRoles = 0
  I have = 0
  WScript.Echo "username; FULL_NAME; ROLE; COUNT. "
  Up to objFile.AtEndOfStream
  strRline = objFile.ReadLine
  If left(strRline,12) = arrFileLines (i) 'DECLARE the USER', then Redim Preserve
  strTemp1 = MID (strRLine, 15, 50)
  strTemp1 = MID (strTemp1, 1, instr(strTemp1, """)-1)
  IF instr (strRline,"}" ") > 0 THEN
  strTemp2 = MID (strRLine, instr(strRline,"{") + 1, (instr(strRline,"}") - (instr(strRline,"{") + 1)))
  ON THE OTHER
  strTemp2 = «»
  END IF
  arrFileLines (i) = strTemp1 &"; "& strtemp2
  intRoles = 1
  i = i + 1
  end if
  If intRoles > = 1 then
  If instr (strRline, "has ROLES (" ") > 0 then
  intRoles = 2
  end if
  If intRoles = 2 and instr (strRline, "a of the ROLES (" ") = 0 then
  strTemp3 = MID (strRline, instr (strRline, "" "") + 1.50)
  strTemp3 = MID (strTemp3, 1, instr(strTemp3, """)-1)
  WScript.Echo arrFileLines(i-1) &"; "& strTemp3 &"; 1 "
  end if
  If intRoles = 2 and instr (strRline)",") > 0 then intRoles = 0
  end if
  end ifLoop
  objFile.Close

  UPDATE POST
  Is your on the right track, work these steps you will find glory... I force try it or needed me.

  hope helped you

  Kind regards
  Murielle.

  Published by: Kranthi.K on June 1st, 2011 02:28