Installation stops and "New version already installed" is displayed, even if I have NO version on my computer.

Similar Questions

• Counselor says that I can run Windows 7. Installation stops and says hardware not compatible. All advice appreciated.

  Go to the last part of the installation, the installation stops and returns to Windows Vista. Receive the message "hardware not compatible". How can I find the material that is causing the problem?

  Hi, Jerry,.

  Uninstall your antivirus software

  Tips for solving common problems when Windows 7 won't install troubleshooting

  1. start Windows Upgrade Advisor to see if there are known issues that might affect the installation and correct them.
  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  2 disable any security software: anti-virus, firewall etc. Don't forget to activate the Afterwords.
  3 make sure that your computer has the BIOS and latest drivers. Update of the BIOS can be risky, don't do that if nothing else works.
  4. disconnect all external devices except the keyboard and mouse before installing.
  5. If using a video card and the computer has integrated video use and remove the video card.
  6 unplug the computer from the internet, if you have wireless disable.
  7. RAM (memory) - reduce the amount of RAM. 1 GB if 32-bit installation, 2 GB for 64-bit, then replace RAM if the upgrade was successful. If you added new RAM make sure it is also compatible.
  8. If you have several hard drives remove all except the one that you install Windows 7, and then replace it after Windows 7 is installed.
  9. If you have downloaded Windows 7 and it burned a DVD test burn again at the slowest speed possible. It is also possible the download may have errors, you can try to download it again.
  10. If you click 'Upgrade' to start the installation make sure that you take a supported upgrade path. You can't make a square by update: type A) XP to Windows 7, B) fuse change - 32 to 64-bit, C) change languages, D) decommissioning editions ex: Vista of the month last 7 Pro, or E) Vista Home Pro 7.

  11. check your RAM (memory) to find errors. Can take a long time, don't make that if nothing else has worked.
  (A) Insert the Windows 7 DVD and restart the computer.
  (B) start from the Windows 7 DVD.
  (C) select your language, and then click Next.
  (D) click on "repair your computer" then select the operating system to fix it.
  (E) click on the link of the Memory Diagnostics in the system recovery menu.
  (F) the computer will restart and your memory is checked for errors.

  12 turn off startup programs:
  (A) click Start, type MSCONFIG in the search box and press ENTER.
  OK the authorization of user account control and password if necessary
  If you are using XP: click Start, run, and type: MSCONFIG and click OK.
  (B) on the general tab, click Selective startup.
  (C) just below the selective startup, clear the checkbox "Load Startup items".
  (D) click the Services tab, check "Hide all Microsoft Services", and then click Disable all.
  (E) click OK, and then restart the computer.
  (F) try the upgrade again.

  (NOTE: If the upgrade fails and you continue to use your rear security software, then also go back into MSCONFIG and under the general Tower XP/Vista tab, click "Normal startup", and then click OK to exit.)

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

  -TrekDozer-

• Microsoft Office Professional 10 and other programs already installed in my PC running Windows 7 family

  Is that one of my other programs (e.g. Microsoft Office Professional 10) and printer is already installed in my PC running Windows 7 family will be affected with the free update of Windows 10 Home?

  Hey Joan of arc.

  The upgrade to Windows 7 or later will preserve my personal files, applications, and settings?

  Yes, the upgrade to Windows 7 or a later version will preserve your personal files (documents, music, pictures, videos, downloads, Favorites, contacts, etc., applications (IE.) Microsoft Office, Adobe applications etc), games and settings (ie. passwords, dictionary, the application settings).

  However, it is a good practice to back up most important data before the upgrade.

  I hope that helps.do reply back for other queries, would be happy to help you.

• Windows Module Installer stopped and was closed

  My computer tried to do update KB976264, KB979306, 976662 KB and KB979099 and after the start-up of the plant and about 23%, it stops and I get the installer stopped and has been closed error. I checked to make sure "Module of Windows Installer Service" is in "manual mode". I tried a clean boot and also a restoration of systems without success. I erased the history and cookies. I disabled the firewall and antivirus.

  I'm looking for any other suggestions get my updates of work as I am running out of ideas?

  Thank you

  Well, after getting a MS help without success, I decided to upgrade to Windows 7. I had thought about it in any case if this just pushed nme along.

  Thanks for your help!

• I got lightroom 6 is installed on my laptop. He beat and went to repair. When it is returned when I tried to use lightroom, it said that I had already installed on two computers. I have uninstall lightroom 6 on my laptop, but when I reinstalled the messag

  I got lightroom 6 is installed on my laptop. He beat and went to repair. When it is returned when I tried to use lightroom, it said that I had already installed on two computers. I have uninstall lightroom 6 on my laptop but when I reinstalled the message that I have two computers is still there. I need help. I don't understand what is happening because it's the same laptop that I installed in the first place. Help, please.

  If she had a major equipment change (as a replacement of hd), it resembles another computer.

  Contact adobe during the time pst support by clicking here and, when available, click on "still need help", https://helpx.adobe.com/contact.html , and request activation reset account.

• I uninstalled the old version of Adobe Reader and tried to download the most recent version; However, I get a message indicating that the new version is already installed.  Adobe is not listed as an Application on my computer.

  I was unable to update Adobe Reader in my computer; then I uninstalled the program.  When I tried to download the latest version of Adobe, I received a message stating that the most recent version of Adobe is already installed on my computer. I don't see Adobe on the list of applications on my computer, any suggestions on what to do? Thank you...

  Hi annac88455204,

  Could you please tell me which OS is running on your system?

  You must remove all traces of the previous versions of reader in order to download a new.

  On windows platform, you can try running the cleaning from the indicated link tool:Download Adobe Reader and Acrobat cleaning tool - Adobe Labs.

  Restart the computer and then try to download the new version from the links provided: https://get.adobe.com/reader/enterprise/

  Please let us know if this solves your problem.

  Concerning

  Sarojini

• Fees and new drive hard install XP operating system?

  Hi all
  I have a Sony Vaio, which was purchased at Costco in 2004 and has Windows XP Media Center Edition installed according to the sticker on the back of the computer.
  The hard drive was out at the time of the computer and installed in an enclosure so that the data could be accessed the laptop for my wife a few months ago.
  Well, I wanted to install a new hard drive in the computer with a new installation of the operating system so that our children can use the computer, but I've never done this before.  So here's my question:
  If I go on eBay and buy a Windows XP Professional OEM with COA key I can install it on this computer, or must be Windows XP Media Center Edition?  When I went to Google I read how if you have Windows XP Media Center Edition (or any other edition of windows by the way) on a computer that is the only operating system that can be installed on this computer.  But I have more than one other computer that I upgraded from Windows 7 Home Premium, Ultimate without problem through an Anytime Upgrade Microsoft.
  I guess that the main reason that I'm asking because we lost the Microsoft Disc supplied with the computer, so I'll have to buy a drive one way or another and I just wanted to know what my options are.
  Thank you very much for any help any of you are able to make.

  You can install a commercial version on your Sony.

  I would not buy it from eBay you have no guarantee that the key is not in use.

  You should buy from a retailer or an online store.

  As your sony will not run Vista or Windows 7, you have no choice but to install XP.

  A better and cheaper choice would be XP Home Edition for children.

  Don't forget, support XP stop April 8, 2014 so that gives you 1 year and 9 months.

  After that, is no longer security update will be available for XP.

  http://www.Ubuntu.com/

  The link above is a free operating system, so no $$$ to pay, you can download it or get it on CD

  I got on the CD 5 years, they have sent to me and even paid shipping.

  I don't know what options are available right now, so you'll have to visit their site.

  Also in contrast to support XP for Ubuntu does not end.

• Problems with Windows Installer - installer stops and shows the dialog on the command prompts

  Hello

  I hope someone can help me with this question... I looked long and seriously, and you have tried all of the suggestions posted (cancel/save, etc.).

  I am trying to install a program and Windows Installer stops right in the middle of installation and a dialog box appears with information from command line, and the only thing I can do is select 'ok'... the program is not installed.

  Here is the info that appears in the dialog box:

  Windows® Installer. V 5.0.7601.17514

  msiexec/option [optional parameter]

  Installation options
   
  Installs or configures a product
  /a
  Administrative installation - installs a product on the network
  /j [/t ] [/g ]
  Publishes a product - m for all users, allows the current user
   
  Uninstalls the product
  Display options
  / quiet
  Quiet mode, no user interaction
  / passive
  Automatic mode - only progress bar
  / q [n | b | r | f]
  Sets the user interface level
  n no user interface
  b Basic UI
  r reduced UI
  f-full UI (default)
  / Help
  Help information
  Restart options
  /norestart
  Do not restart after the installation is complete
  /promptrestart
  Prompts the user to restart if necessary
  /forcerestart
  Always restarts the computer after installation
  Logging options
  / l [I | w | e | a | r | u | c | m | o | p | v | x | + |. | *]
  i status messages
  w warnings recoverable
  e-all error messages
  a startup of actions
  r registers of the specific action of the
  u user requests
  c initial UI parameters
  m out-of-memory or fatal exit information
  o disk out-of-space messages
  p - Terminal properties
  v performance
  x extra debugging information
  + - Add to the existing log file
  ! -Flush each line in the log
  * - Log all information, except the x and v options
  / log
  Equivalent of / l *.
  Update options
  / Update [; Update2.msp]
  Apply updates
  / uninstall [; Update2.msp] / package
  Remove the updates of a product
  Repair options
  /f [p | e | c | m | s | o | d | a | u: v]
  Repairs a product
  p only if the file is missing
  o If the file is missing or an earlier version is installed (by default)
  e If the file is missing or an equal or higher version is installed
  d if the file is missing or a different version is installed
  c If the file is missing or checksum does not match the calculated value
  has all the files to reinstall the forces
  u all (default) user-specific registry entries
  m all requirements (by default) computer-specific registry entries
  s all (default) shortcuts
  v-runs from source and recaches local package
  Setting public properties
  [PROPERTY = PropertyValue]

  Consult the SDK Windows® install to get additional documentation on the
  command line syntax.

  Copyright © Microsoft Corporation. All rights reserved.
  Portions of this software are based in part on the work of the Independent JPEG Group.

  I hope someone has a suggestion for this problem... I just bought a new laptop and Windows 7 Professional came installed on it.

  Thank you

  Linney thanks for your response!

  The file I'm trying to install is an exe file (so the SIG file is embedded in the exe file).

  I tried the option "Run As Administrator" and it did not work.  However, you gave me an idea that has provided a work around that allowed me to install the program.

  Once this dialog box is displayed with all the control switches, rather than press 'OK', I left on the screen and went in the 'temp' folder and find the MSI program I tried to install (I cross referenced the timestamp of when I tried to install it to find).

  Once I found the updated file, I clicked it, and he proceeded to install the program... I have not had any other problems with the installation.

  So, there's something wrong with the way that the exe file have been created and how the files extracted from the msi file (these are files of Intel and Lenovo - driver updates - so I think they do these things) or there is a problem with Windows Installer.

  For now, at least, I have a work around I use until I find a solution to this problem of permanent

  Thanks for your help and for taking the time to answer!

  I hope this can help someone else in the future

• dual boot 7 and 8 is already installed on different drives

  I can't believe this is unique, but I can't find it anywhere. I got Windows 7 Professional on my C: drive and the computer is dead. I bought a new computer and it came with Windows 8. I have two drives in the system now, with 8 being the one who starts. I want to dual boot option, but each set of instructions I've seen said to implement the dualboot during the installation of OS 2 and they are both already installed. Is there a way to do this? If this isn't the case, I'll have to erase Windows 8, because I have too much to do my Pro 7 OS give it up. I have the disc for 7, if this is important; 8, of course, only came with one. Both are legal and 64-bit. Thank you.

  Hello

  It is technically required to install Windows 8 after you have performed the installation of the previous version of Windows (in your case, Windows 7), if you have a dual boot computer.

  In addition, a computer is supposed to have a dualboot when 2 operating systems are installed on different drives of the same HARD drive. In your case you use different HDD 2. Therefore, to get the Windows 7 boot option will be impossible.

  If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

• Windows Live Messenger force the installation of a newer version that I don't want.

  A newer version of Windows Live Messenger has been downloaded without being asked. Now can't connect - pop up says MUST install a newer version to continue. DON'T want to change. How can I get rid of the plague?

  Hello

  Method 1.
  Here's how you can solve this problem:

  a. download the latest version of Windows Live Messenger available onhttp://explore.live.com/windows-live-Messenger-XP

  b. update of Windows XP through Windows Update.

  c. go to "C:\Program Files\Windows Live" and remove the 'Messenger' folder (Note: replace 'C' with your root drive letter)

  d. go to "C:\programdata" (Note: replace 'C' with your root drive letter) and remove Windows Live install and WLInstaller, if you have a

  e. restart the PC.

  f. run the installation program that you downloaded.

  Method 2.
  If the problem persists I recommend you ask your question on the dedicated Windows Live forums.

  Here is the link to the Windows Live Messenger category.
  http://windowslivehelp.com/forums.aspx?ProductID=2

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• plugins and new version 36.0.4

  I installed today at V36.0.4 and the plugin (LegaSuite printer) I need for 2 web applications that uses my office is no longer available with the new version. I get the following message: a plugin is required to view this content. I tried searching for the printer LegaSuite regarding Add-ons - plugin, but it is not found. I tried to go back to the old version of Firefox, but the plugin is still not available. Employees who have not upgraded to the new version are still able to print from web applications. Any suggestions on how to get back LegaSuite or another plugin equivalent?

  Have you checked with LegaSuite web support?

• Since the installation of the new version, no e-mails arrive. When you click on Get messages it says 'Get messages for anyone '. Why can't I get new messages?

  Last weekend my son updated for Thunderbird later for me but I could not new messages - as I flew over the mouse get Messages, prior to ordering, he said 'Get messages for anybody', so my son put the older version on my computer and it has worked, until I started my computer this morning and found this new version had himself installed , and now it will not be new messages and again said 'get messages for anybody. " Unfortunately my son has 120 miles away, and even if I sent him an email, copied to myself, I was unable to receive my copy or any response to my son. Can you help me please? As I am not able to receive messages, I'll have to come back to this support page. Thank you.

  Download default messages, current account, not all accounts.

  Versions updates are often blocked by anti virus programs that are waiting for their owners to approve the new safe software.

• How to start the exe downloaded the installer for a new version?

  With an old windows XL, I thought that my firefox is old and unsafe. I try to download a new version. To download an exe installation file, it seems to me, but then nothing happens. According to the 'help' maybe there should be an 'OK' button to click, but I don't see one.

  Double-click the exe file

• How to stop "a new Version of DivX is available"?

  I've recently updated for Snow Leopard to El Capitan (4 OSes in a break!) Now, every now and then a message box appears in the bottom right of my screen saying "a new Version of DivX is available.

  I have two questions:

  1. What is DivX?
  2. Before you download a new version of DivX, how can I stop the message from popping up boxes?

  Appreciate the help.

  -Gil

  This thread answer the same question.  Read carefully, including the thread it references.

  Is it safe to download DIVX

• Cannot run Beta and new version at the same time more? Seriously? !!

  So according to the info in this post closed... https://forums.Adobe.com/thread/1871117

  • ' For users with the beta version: If you have a beta version of the software that is already installed, make sure that you uninstall the software before installing Adobe Muse CC 2015. " "

  So that you guys give a feature that has been requested, have us able to use it for a while now, then - remove him?

  That's why I / we recreate all the work accomplished in our beta versions?

  Why don't you take this account?

  Please tell me I'm missing something...

  Not to mention having to deal with endless rotation CC icon of the desktop app does not connect... and yes I saw the OBE or uninstall hotfixes.

  I love CC and Muse, but sometimes I think that more is bitten that can be swallowed with these huge updates.

  You are missing something... ;^)

  2015.0 Muse has been shipped. It is the newest of the beta builds and can open any file you were working with a beta version.

  Maybe if you describe some trouble or errors you encounter with the help of the final version of 2015.0, we can help you?