Installation update KB936330 (Vista SP1) fails with error 8007371B code. No one knows what is the cause?

Similar Questions

• I have a compaq presario cq60 with vista which was able to start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. What can I do?

  I have a compaq presario cq60 with vista. Could not start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. I took the hard drive and installed in my office. Windows Explorer displays the main and recovery partitions.

  The primary partition has the following folders (including hidden & system)

  The recovery partition has the following (including the language files more)

  Someone at - it ideas why my laptop does not work?

  Thank you

  Greg

  Hello

  You press F11 on startup with a HP Compaq to start the recovery process.

  For problems with the recovery process, you will need to contact HP.

  BIOS problems:

  There are messages for the HP Forums for posters with similar errors:

  http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/notebook-HDD-problems-TEst-status-1-07-fail/TD-p/658902

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-dv8000-getting-1-07-fail-error/TD-p/883284

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-notebook-dv6000-1-07-fail/TD-p/1069457

  All the answers it point to a drive about to fail

  See you soon.

• Problems with Windows Update on Vista SP1 32 - bit Error: 0x8007000D

  Two updates have been failing install for me for several weeks. I finally decided to try to understand what is happening, and I'm stumped at this point.

  The updates are:
  Update cumulative security for Internet Explorer for Windows Vista (KB969897)
  Internet Explorer 8 for Windows Vista

  These two with an error code of 0x8007000D

  I tried almost everything I can think of, scanned for virus/malware, scandisk, verification of the SFC, several difficulty different sound of Microsoft, I even cleared out / reset Windows Update with several different methods and has run the system preparation tool.

  Then, I tried to install Vista Service Pack 2, perhaps thinking that might help - would not install either.

  The ie8_main.log contains the following:

  00:00.249: started: 2009/07/21 (A, M, J) 22:15:46.875 (local)
  00:00.281: time Format in this newspaper: MM:ss.mmm (minutes: seconds.milliseconds)
  00:00.312: command line: 'C:\Windows\SoftwareDistribution\Download\Install\wuiesetup_prereq.exe' /wu
  00:00.468: INFO: checking for C:\Windows\SoftwareDistribution\Download\Install\wuiesetup_prereq.exe version: 8.0.6001.18702
  00:00.561: INFO: Package Installer Mutex acquisition
  00:00.593: INFO: operating system: Windows Workstation: 6.0.6001 (SP1)
  00:00.593: INFO: Vista the operating system detected. Service pack major: 1, minor SP: 0, name of Service pack: Service Pack 1
  00:00.608: INFO: check if you have installed the battery update service
  "00:00.608: INFO: SSU version regvalue found: ' 6.0.6002.18005.
  00:00.624: INFO: Servicing stack update found. Permanent installation
  00:00.624: INFO: check the prerequisites
  00:00.639: INFO: met prerequisites: Yes
  00:00.639: INFO: checking for C:\Program may Explorer\iexplore.exe version: 7.0.6001.18000
  00:00.655: INFO: C:\Program may Explorer\iexplore.exe version: 7.0.6001.18000
  00:00.671: INFO: check if s iexplore.exe version current is between 8.0.6001.0...
  00:00.671: INFO:... .and 8.1.0.0...
  00:00.686: INFO: version Maximum on which to run IEAK branding is: 8.1.0.0...
  00:00.686: INFO: success check iexplore.exe version. Proceed with the installation.
  00:00.702: INFO: checking for C:\Program may Explorer\iexplore.exe version: 7.0.6001.18000
  00:00.702: INFO: version for C:\Windows\system32\mshtml.dll check: 7.0.6001.18183
  00:00.717: INFO: version for C:\Windows\system32\wininet.dll check: 7.0.6001.18148
  00:11.481: INFO: EULA accepted
  00:11.497: INFO: user successfully completed the scenario WU. Exit with return code 322376503 so WU will install IE8
  00:11.497: INFO: install return value: HR = 0 x 13371337
  00:11.513: ERROR: installation exit code: 0 x 13371337 (Undefined error Code).

  and the CheckSUR.log file contains the following:

  =================================
  Preparation of control system was updated.
  Binary version 6.0.6001.22375
  Package, Version 5.0
  2009-07-21 20:03

  Checking deployment Packages

  Audit of manifest Package and catalogs.

  Checking package watchlist.

  Control of component watchlist.
  (f) CBS registry 0x8007000D Package_1_for_KB944533 error ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.1.944533 - 4_RTM_neutral_GDR enumeration child package failed, index: 9

  Verification of the packets.

  Control components store

  I tried to remove the KB944533 and get an error. I have also tried to install a copy of the KB944533 but told me that it wasn't the version appropriate for my version of Windows.

  I am at a loss and no longer know what to check. I guess that there is a corruption in the registry (or system files) associated with KB944533, but I can't figure out how to get the installation routines for give me more detailed information.

  Any help would be greatly appreciated. While my PC is functional and I have no other problems with it, I would like to be able to try IE8 at a given time.

  Thank you
  -Al

  Success!

  I finally understood what was going on. This is a damaged registry entry.

  The registry entry for the key:
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Component based Servicing\ComponentDetect\x86_microsoft-windows-ie-setup-support_31bf3856ad364e35_0.0.0.0_none_e9aaaad1a6a385a4

  content, which was supposed to be a string value entry for:
  Package_1_for_KB944533 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.1.944533 - 4_RTM_neutral_GDR

  Unfortunately, it was not of type "REG_SZ" but altered with a type of
  0 x 40000001, which was identified as a binary key.

  I could not initially remove/change the key, therefore, found some instructions on how to reset the permissions on your registry using a Microsoft tool called: subinacl

  After the race I could rename the bad registry entry and add it back in manually, by giving the appropriate string value.

  Now, I was able to install IE8, so I think everything is resolved. Going to update to Service Pack 2 for Vista soon.

• KB948465 installation (vista sp2) failed with Error 80070020

  I'm trying to install KB948465 but it keep fail with the error code 80070020.

  I tried all the solutions mentioned in the forum but none does not seem to work.

  Can anyone help?

  Hello

  I suggest that you try make a Place to upgrade and then try to install the updates.

  Note that it takes the same amount of time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.

  To be safer side, please back up your data.

  Please see: How to perform an upgrade in Place on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  http://support.Microsoft.com/kb/2255099

• Update Vista SP1 fails with 8000FFFF

  I installed windows vista sp1 and sp2 in around March 2011, I decided to uninstall because I couldn't have a 3rd themes on my PC. Now I have a Windows 7 CD, I tried to upgrade my vista but it said I had to install Service Pack 1 to be able to do. I went to windows update and download and install service pack 1, when he had finished he said he had not and gave me the 8000FFFF error code. Also I tried to download service pack 1 from the Microsoft Download Center and install it manually, but always after a reboot I 0x8000FFFF. I've been looking for a solution to this problem since June, but still no luck tried in safe mode, with downloader manually from the microsoft Web site, what I found does not work.

  Hello

  Were there any changes or updates made on the computer before the show?

  I suggest you to return the item and check if it helps:

  0x80000FFF error code when you download updates on a computer running Windows Vista by using Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/946414

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up the registry, see the link:

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

• Dot net Frame work 2.0 SP2 and 3.5 Sp1 failed with error 0 x 80070643

  Can you please help me out with the solution for Dot net Frame work 2.0 SP2 and 3.5 Sp1 failures that occur frequently.

  We tried with the dotnet uninstall and update with the last, but still the questions are on the same machine when we have updated with the latest patches released from Microsoft.we use WSUS 3.0 to update patches from microsoft in desktop computers

  Error code : Installation failure: Windows failed to install the following update with error 0 x 80070643:

  Please help with a permanent solution.

  http://support.Microsoft.com/kb/976982

• Whenever I try to download the update, I've learned the update failed with error U44M1P2003 code.

  Whenever I try to download the updated version, it fails and cites the U44M1P2003 error code. Can we help.please

  Robert123

  Thanks a lot, this question comes with the release of Photoshop elements or Premiere Elements.

  Please refer to the instructions in the links below, this should help solve the problem:

  Error Code U44M1P2003

  Error Code U44M1P2003 when updating of PS12.1?

  12.1 error installation update | Photoshop Elements, first Elements

  Let us know if that helps.

  Kind regards

  Bani

• CC app manager update failed with error 50 code after reaching approximately 35%

  Try to update the app CC Manager. The update is still very slow (I have ATT DSL, lowest level) and I usually stop after an hour or two. Today I let it run and it failed with the error code 50 after reaching approximately 35%. Any ideas?

  Update my original post. I read through some of the suggestions I found in other threads to solve this problem, and it seems that this is a recurring problem. Many corrections have been suggested, some very convoluted, difficult and involved, including those who came to the customer support people.  I passed on those who, like this must be something simple. How Adobe managed to leave their own tour of software update in a persistent problem is beyond me and kind of defeats the object of the subscription. I then noticed that a simple fix has been proposed several times, so I tried.

  The user suggested fix that worked for me was:

  (1) restarted the computer (machine of i3 Asus Windows 7 for me) in Mode safe mode with networking. Connected to my separate Admin account just in case.

  2) started the creative cloud desktop application.

  (3) the app said it had to be updated. I hit the update button.

  (4) update started and proceeded slowly as he was in a lot of previous unsuccessful attempts (I have ATT DSL to the slower level, but it is not switched). In 30 minutes, the update succeeded.

  (5) restarted the computer in normal mode.

  (6) the creative cloud desktop application now has not said he should be updated, and I can update my other apps normally. Have not updated LR or PS again, but intend to try. If this fails, I can try to do in Mode safe mode with networking.

  So, it's been relatively painless and much much simpler than most of the other suggestions I've seen. Don't know if this will work for everyone, but I wanted to post the solution that worked for me. Thank you very much for users of 2 or 3 which had proposed this hotfix earlier (sorry, I did not write down your login, but threads can be found in search for creative cloud desktop update fails error code 50). Hope this saves some people a lot of time.

• Windows KB2393802 update fails with error 0X8007054F code

  OS is Win XP SP3

  Looks like it was the first update of the usual pack that came out this week. It doesn't have the rest Pack updates succeeded.

  FWIT previous update was installed on 12/01/2011 KB890830.

  I rebooted, still failed. I tried to run the update directly from the windows update web page, same result. A Google search suggests that I'm not the only one to question.

  If you are absent the Shell for Windows (KB2483187) and updates to the kernel (KB2393802) and yet the previous kernel update (KB2436673) and the two latest updates of the kernel (KB981852 & KB2479628) driver installed. I assume that the previous update of Windows Shell (KB2286198) is installed.

  This suggests that you may have picked up an infection of W32/Alureon-varying rootkit since mid-December.

  1. Let's see what could detect & remove Kaspersky TDSSKiller:

  How to remove malware belonging to the family Rootkit.Win32.TDSS (aka Tidserv, TDSServ, Alureon)
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  2. If such an infection was detected and removed: open Internet Explore (only) tohttp://support.microsoft.com/kb/971058 & run DEFAULT inside difficulty modes and AGGRESSIVE; Restart & test. [1]

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove programs.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Today update failed with error U44M1P7 code

  I received Adobe Application Updates today which says that they are updated Adobe CSXS Infrastructure 4 and on their installation, I received the following message is displayed:

  Adobe CSXS Infrastructure 4

  Failed installation. Error code: U44M1P7

  How to remedy?

  Try http://www.adobe.com/exchange/em_download/

• KB2676562 update fails with error 0X8007054F code

  I am constantly told to install this update, it fails every time.

  Hello

  Follow these steps and check if they help.

  Step 1:

  Put your computer in a clean boot State, then install the update.

  Note: Restart your computer as usual by following the steps described in the article.

  Step 2:

  Follow the steps in this article and check if that helps.

  Cannot install updates.

• The module "mscomctl.ocx" was loaded but the call to DllRegisterServer failed with error 0x8002801c code.

  Software Access 2003 worked for years. Then received "There is no object in this control" which referred to a control in mscomctl.ocx I used in a form. Then, I got an error, "There was a problem accessing a property or method of the OLE object.".  Then I tried to re - insert the control in the form and got the error "the OLE server is not registered.  Then, I tried to register the OCX with the command 'regsvr32 mscomctl.ocx' BACK and received the 0x8002801c error message in the title of this question.
  Help please!

  Access discussion groups, I found a description of a problem with the controls in Visual Basic 6.0 Runtime Extended Files. Update of security 960715 disables controls in Visual Basic 6.0 Runtime Extended Files.  In my case, the TreeView control is in MSCOMCTL. OCX. It's logical.

  The proposed solution is to download the update on the Visual Basic 6.0 Runtime Extended Files and install.  I did and I now have MSCOMCTL. OCX version 6.1.98.16. I run my Access app and I get the same error, "It is not object in this control".  I re - record MSCOMCTL. OCX, open the form, remove and reinsert the TreeView control.  The same problem.  Will there be another question in the newsgroups dealing with my problem?

  Moreover, the 0x8002801c error went away after installing the Vista SP2.  However, I always get the error "there is no object in this control".

  I studied the problem of killbit described in the FAQ of The Kill - Bit which is suppose to disable certain controls in IE and 'Scenarios of Microsoft Office' (?). I find valid Pheonix-Bit entries in my registry (HKEY_LOCAL_MACHINE Microsoft\Internet Explorer\ActiveX Compatibility\ {...} corresponding to the TreeView control ' killed'.  No change to the error.

  Sometimes miracles happen.  Life is back to normal, and the problem stopped. Microsoft must have fixed in a recent press release or there was divine intervention.

  After you remove the Treeview control on the form and re - insert, the problem has been resolved.  So, the solution is:

  -Install the Visual Basic 6.0 Runtime Extended Files.
  -Remove the Treeview controls on all forms.
  -Re-insert the Treeview controls.

• Aspire 4830 upgrade to win 10 of the 7 has failed with error C1900101 code, what is the solution?

  Said Acer laptop, aspire 4830 T is obsolete and cannot be upgraded to win 10 even if get win 10 app says its compatible with the upgrade. He said that some drivers or devices may not work with 10 victory. I tried to upgrade to win 10, but not successful and displays C1900101 error code. can someone help me upgrade to win 10?

  Your error code is listed here:

  http://answers.Microsoft.com/en-us/Insider/wiki/insider_wintp-insider_install/how-to-troubleshoot-common-Setup-and-stop-errors/324d5a5f-d658-456c-bb82-b1201f735683

• "Unable to connect to the printer. Operation failed with error 0 x 00000866", setting up a network printer

  Title of the Moose: error 0 x 00000866

  I have a laptop with windows 7 Professional.

  When I try to install a network printer I always get the message "cannot connect to the printer. Operation failed with error 0 x 00000866.

  What can I do to fix this

  Hi ETPM.

  You can try the following steps and check if it helps.

  Method 1:

  You can try to start troubleshooting printer and check.

  Check out the link:

  Open the printer Troubleshooter:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2:

  Error message when you try to install a network printer on a Windows Vista-based computer: "Windows cannot connect to the printer operation cannot complete (error 0x0000000d).

  http://support.Microsoft.com/kb/947236

  Note: You can read this article and try to proceed as for Windows 7 also.

  Important: Serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow the steps in the link mentioned above carefully. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  http://Windows.Microsoft.com/en-us/windows7Back-up-the-registry

  Method 3:

  If the fix above is unable to get the printer working on your client machine to vista, so I suggest to follow the steps mentioned by Afzal Taher as of Friday, December 18, 2009 02:00.

  http://social.answers.Microsoft.com/forums/en/w7network/thread/954c4b9d-2F4C-4b1b-8fb6-49204ed96dfc

  Also check out the link:

  Install a printer:

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Unable to share the printer attached to the XP with windows 7, receive error message: windows cannot connect to the printer: operation failed with error 0x000004f1.

  Original title: printer HP LaserJet 4050 of PCL6 compatible with Windows 7?

  I have a desktop windows xp pro (SP3 5.1.2600) and you have a printer HP LaserJet 4050 PCL6.  The printer works fine connected to the desktop computer with a parallel port.  I'm trying to share the printer on my home network so that Win 7 (6.1.7601 SP1) laptops can use its printing features.  Please help.

  First I tried to add it with \\hostname\printername that returned this error: windows cannot connect to the printer: operation failed with error 0x000004f1.
  I downloaded and installed the Win7 drivers on the HP site on my laptop Win7, that has not changed a thing: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=18318&prodTypeId=18972&prodSeriesId=25475&swLang=8&taskId=135&swEnvOID=4063
  Thanks in advance for any help / support!

  Hello

   

  1. the two Windows XP, Windows 7 connected in a same workgroup?

  2. can you access files shared XP of Windows 7 computer?

  3. check if the printer is shared or not?

  I suggest you follow these methods and check.

  HP LaserJet 4050 PCL6 printer is not compatible with Windows 7. Printer drivers are available for Windows XP-based computers only.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=25475&prodNameId=18322&swEnvOID=228&swLang=8&mode=2&swItem=LJ-4119-3

  It is not in the Windows 7 Compatibility Center.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=hardware&s=4050%20PCL6

  I sugegst you contact HP support for Windows 7 drivers, after you instaall drivers to check with the question.

  http://WWW8.HP.com/us/en/support-drivers.html

  See also: networking computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows#section_7

  I hope this helps!