Similar Questions

• Installation update KB936330 (Vista SP1) fails with error 8007371B code. No one knows what is the cause?

  I've had this problem for awhile now and it seems to be no details on how to stop the resulting error code.

  The update of the serivce pack seems almost half installed the first time that I have tried (and the first time she didn't).  Whenever I try once again today, the process bar is automatically up to halfway and then it goes all the way to the breast are contiguous 5 minutes and gives this error code.

  This update seems important.  I can download all other updates without problem and downloaded system preparation tool already and tried to install the update by downloading it manually - the same problem occure.

  Can anyone help please?

  I tried the above and the error persists.  Is there another way?

  The only other 2 methods would be:

  (1) try to run the System File Checker and see if it can replace or repair which is not present. Read the section ofthe System File Checker utility

  (2) do a upgrade on the spot , aka Repair the Installation, if you have the Vista installation DVD: How to perform a repair for Vista Installation

  In addition, Microsoft has extended its offers free support for those who are just trying to install Vista SP1 :

  From: https://support.microsoft.com/oas/default.aspx?ln=en-us&x=8&y=6&prid=11274&gprid=500921&st=1&wfxredirect=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for the Service Pack 1 (SP1). This support for SP1 is valid until August 30, 2010. Availability of support chat or messaging differs depending on your location. For customers resident in America North or Canada, chat and e-mail support is available.

  Some questions may require more Advanced support for which there is a charge.

  Please click on the first link to receive free assistance of MS before August 30 .

  MowGreen Services update - consumer safety

• Update Vista SP1 to SP2 stuck on 0% download

  I'm updating Vista SP1 to SP2. The update says "download updates 0%" complete & back no change. I tried to disable the security software. It did not work. I used the tool to update reset. This doesn't work anymore

  Free unlimited installation and compatibility support is available for the Windows Vista SP2 problems. [This free assistance was scheduled to end on August 30, 2010, but I suspect that the offer was extended for a few months.] Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Fresh install of Windows 8 the new SSD and Windows update found 127 updates and they failed with error code 80248007

  I've been struggling for weeks to try to get my computer Windows 7 update to Windows 8.1. It is not interesting to go in full history frustrating because I gave the update and now I just try to start over again. The recent measures and current situation is as follows:

  1 PC is powerful enough with i7 and 16 GB chip.

  2. new SSD this week.

  2. freshly downloaded Windows 8 Pro ISO burned to a DVD and checked.

  3 Ran install successfully and signed using my Microsoft Account.

  4 tried Windows Store for Windows 8.1, but said I need updates.

  4 Ran Windows Update in Control Panel.

  5. Windows update found 127 updates and they failed with error code 80248007.

  I don't understand how I can get these failures with a new facility.

  Any help will be greatly appreciated. Thank you all in advance!

  Hello

  Glad you got it going... If I had to guess, it was very likely updates .net 3.5, which has caused the problem... or maybe, Net 4.5...

  They require a process runs to complete their installation that seems to start running in the middle of updates remaining to try to install...

• VMware Update Manager - Setup failed with an unknown error. vCenter credentials could not be validated

  Hi all

  I have my getting the error next message when I try to install VUM.

  VMware Update Manager - Setup failed with an unknown error. vCenter credentials could not be validated

  Help, please.

  Hi John,.

  Please follow the link below.

  http://www.virtualmvp.com/VMware-Update-Manager-Setup-failed-with-an-unknown-error-vCenter-credentials-could-not-be-validated/

  Thank you

  Venance

• Vista - update security KB982381 fails with the error Code: 80071AA7

  Update Cumulative security for Internet Explorer 8 for Windows Vista still fails to install.  At the beginning I had 6 automatic updates which could not install (usually NOT a problem), so I individually installed each... reboot after each update.  Success on those.  I tried to update KB982381 more than 8 times without success.  I don't use IE as my browser.  My computer is constantly trying to install this and reboot... never works.  Don't know what to do.

  I did everything you suggested in the last email and I am sorry to say that the update has failed once again.   I use Mozilla Firefox as my browser, but I open IE * to run its difficulty etc.  I ran Windows Update (reset) in aggressive mode (what settings it reset?  I noticed when I went to the Control Panel, to look for updates and it listed that it is 'never' updates etc.).  When I did find updates sent to download, it came with one that was a failure and the other for Windows Defender.  This one has installed fine.  Let me know what I should try!  Thank you

• Cumulative update to IE9 for Windows Vista (KB292418) fails with the error code 800719E4

  Automatic update of Windows is on and downloaded the updated Cumulative of IE9 for Windows Vista (KB292418). Its installation was also successful until stage 2.

  Upon restarting, the system did not proceed to step 3 and reported that he could not apply. The windows update tries to repeatedly apply this patch has failed, but never succeeds. When the computer reboots, the white screen will appear. I ran the autoatic troubleshooting provided by Microsoft who reported some problems with the registry and settings.  Even after the system is restarted, the problem still persists.  I would like to find a solution to this problem.

  My system is running Windows Vista Home Basic with Service Pack 2 32-bit.

  Moved from Vista to install, upgrade and activate Forum.

  Hello

  Try to download the update and save it to your desktop

  Close all windows/Applications

  Right-click on the file and select run as administrator

  If that fails, run the system update tool

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-system-update-readiness-tool

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058/en-us

• Update Windows again me that there are 11 important to install updates. It fails with the error 80070490, Code and Code 80073712.

  Original title: update Windows problem on Vista 64-bit

  My Windows Update repeat me that there are 11 important to install updates. It fails whenever I have try running with 80070490, Code and Code 80073712 error.

  I tried the Windows analysis tool, the difficulty it tool Microsoft and the web site Microsoft Fix It I have have also run a registry cleaner and that he would follow the instructions of Microsoft to solve the problem of Windows Update by editing the registry, but I get 'Access denied' when ordering fast, even though I checked all permissions.

  The updates are:

  Update for Windows Vista for x 64-based systems (KB972145)
  Update for Windows Vista for x 64-based systems (KB2633952)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 for x 64 (KB2572075)
  Update security for Windows Vista for x 64-based systems (KB2564958)
  Update for Windows Vista for x 64-based systems (KB970430)
  Update security for Windows Vista for x 64-based systems (KB2378111)
  Windows PowerShell 2.0 and WinRM 2.0 for Windows Vista for x 64-based systems (KB968930)
  Update for Windows Vista for x 64-based systems (KB2345886)
  Update security for Windows Vista for x 64-based systems (KB967723)
  A security update for .NET Framework 3.5 SP1, Windows Vista SP2 and Windows Server 2008 SP2 for x 64 systems (KB2518866)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 for x 64 (KB2633874)

  I realize that these are not critical updates, but am concerned that, if there is a problem with the update, it will not refresh the critical updates either.

  Any help would be greatly appreciated. Thank you.

  Etherlass

  Hello again,

  Thought I would let you know that I've finally sorted this! :)

  In another forum I read a post from someone who had a similar problem and solved it by uninstalling the "failures" updated, restart the PC and then re-run the update. It worked! It had not occurred to me to try what I've assumed that 'impossible' meant that they had not installed at all, not that they didn't had simply not installed correctly and must have become corrupt.

  I hope this will help someone else who has the same problem, I've had!

  Best wishes

  Etherlass

• VS 2005 SP1 fails with "WindowsUpdate_0000066A" "WindowsUpdate_dt000" error message

  Recently installed the version of SQL Management Studio 2005 Advanced Express Services (who have already installed the baseic version) on Win 7 x 64. In the next update of Win gave me Visual Studio 2005 SP1 to the version of Business intelligence that settle. This update will fail with the "WindowsUpdate_0000066A" "WindowsUpdate_dt000" error message. I looked at different posts that mention it previously installed, MSXML 6 is not being installed etc, but not yet found a solution.

  Suggestions welcome! Ian Haynes

  Ian,
  You may want to reset the Windows Update components and try the update again.  Also if you have not yet done, download the update and save it on your dektop and then run it from there.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• 800736B 2 of error Code woes. Windows Update (Vista SP2) fails to install a bunch of updates

  I know that this problem was posted a lot everywhere on the internet (even here), but I would like to explain a little better than everyone else and maybe I can somehow get to the bottom of this.

  The problem:

  I am trying to update my acer 4/5 years, grandfathers aspire running Windows Vista. Whenever I try to install the following updates:

  http://i.imgur.com/SBxv8.jpg

  I get 6 updates installation failed with error code 800736B 2. When I turn the computer off, he pretended to go through the process of 'completion' facilities update 6 (you know what I mean, it says after that windows has disconnected the user is installing updates). It takes about 15 minutes, then when I re - turn on the computer and check the updates again the exact same updates are always listed.

  The attempts of a solution:

  I downloaded and used the update tool for Windows Vista (http://support.microsoft.com/kb/947821) system. It shows the exact symptoms of the same as the rest of the updates. It "installs" (which lasts about an hour. Said it was successful. Then I restart the computer, it 'full' Update 1 on 1 which have been installed, when I opened the tool (after reboot), it says that I have to reinstall the same update (KB947821). So obviously it cannot be installed but for some reason any thought that he didn't.

  I also tried to run this tool in safe mode and had an error that says that I can't run it in safe mode. Sweet.

  I wanted to download the updates manually (I was hoping that they would be in the form of some .exe or something) then run their safe mode, since you can't use windows update in safe mode. I looked around online a lot, but could not find a way to download the updates manually. I found a bunch of guides tell me how to do, but non of them work. My guess is that they removed the support for it.

  If anyone has any ideas as to what I can do without having to reinstall windows it would be awesome. My grandfather is really exhausted all of this current vista installation so wipe everying is probably a bad idea. I would like to avoid it at all costs.

  Hello

  You can try the steps in this KB http://support.microsoft.com/kb/883825 for a similar error, but others indicated that they were able to solve this problem by using the KB.

  See also: the problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• Windows Update KB979482 always fails with 8007065E error code

  KB979482 fails with 8007065E error code. All other updates are successful.

  Running Windows Vista Edition Home Premium SP2.

  Here are a few excerpts from C:\windows\windowsupdate.log:

  ... ~ snip ~

  DnldMgr * updates to download = 1
  Agent * title = update security for Windows Vista for x 64-based systems (KB979482)
  Agent * UpdateId = {8D253BCE-EB56-47C2-AA58-E5D3F7173CC9}.103
  Agent * bundles 1 updates:
  Agent * {BD1DEFF4-A43A-455A-8174-6050A6010AE4}.103
  ... ~ snip ~

  Automatic update fails...

  ... ~ snip ~

  Manager of FATAL: UH: 0x8007065e: CreatePackage failed in CCbs::CreatePackage
  Manager of FATAL: UH: 0x8007065e: StartStagePackage failed in CUHCbsHandler::StageCbsPackage
  Generation of FATAL Manager: request for CBS full update with hr = 0x8007065e and pfResetSandbox = 0
  Manager of FATAL: Source of error is 106.
  FATAL DnldMgr: DM:CAgentDownloadManager:GenerateAllDownloadRequests: GenerateDownloadRequest failed with 0x8007065e.
  DnldMgr error 0x8007065e occurred when downloading update; notification of dependent calls.
  ... ~ snip ~

  So I tried to download KB979482 here:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=9622 and run it standalone.

  However, when I try this, Windows Update Standalone install displays the message"this update does apply to your system."

  I can live with that (if the message is actually true). But if if this patch does not apply to my system, then why Windows Update keep trying to install it as an update 'important '? How can I get off the list so that the Windows Update log is not cluttered with all of the failed attempts?   Finally, I ran Windows Update Fixit tool available.  He fixed a couple of things (default location, another minor config) but not this problem.

  P.S. running BitDefender 2012 if it matters...

  To answer my own question, you can reset the status of the following method KB2509997 8 download and rename the folder C:\Windows\SoftwareDistribution. It would be nice if there was a less force brute to do this, because she loses all your update story and settings, but at least it works.

• KB948465 installation (vista sp2) failed with Error 80070020

  I'm trying to install KB948465 but it keep fail with the error code 80070020.

  I tried all the solutions mentioned in the forum but none does not seem to work.

  Can anyone help?

  Hello

  I suggest that you try make a Place to upgrade and then try to install the updates.

  Note that it takes the same amount of time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.

  To be safer side, please back up your data.

  Please see: How to perform an upgrade in Place on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  http://support.Microsoft.com/kb/2255099

• Bluetooth lost after updating Vista SP1 on Satellite P200

  Hello

  I'm desperate...

  I use a mini Logitech dinovo keyboard like a keyboard for my P200. It connects via Bluetooth. My Bluetooth connection is a Bluetooth USB device provided with the keyboard. Until yesterday, everything worked fine, but then I installed the Vista SP1 and I lost the bluetooth connection. The computer does not recognize the device Bluetooth USB and bluetooth Control Panel contral disappeared.

  I have one installed SP1, it does not solve
  I have restore before SP1, it does not solve
  Nations United installed the software of Logitech and re install, it doesn't work.

  I downloaded and installed the driver from the BT monitor and it does not change anaything. I installed the drivers of BT stack, but it doesn't

  Please can someone help me?

  Much appreciated,

  WR

  In such situations, there are two sides. It will be interesting to know if there is a problem if you try to connect another BT device to your laptop. Try it with your mobile phone if BT is available.
  I can't imagine the BT device doesn't properly work.

  Have you tried to contact Logitech technical support? Maybe they have the solution to this.

  All you have done is OK, but I can imagine that that SP1 of Vista SP3 in Windows XP Home edition can perform or certain disorders.

  Please check other BT device functionality and display the results.

• Download works 9 KB2092914 security update and it fails with the error code 646

  Update of security for Works 9, KB2092914, downlaod fails with the error code 646

  See this thread:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/0c397230-26c6-4214-a5d1-3c99d2b2ef47

  Please let us know if that helps.

• Windows 7 Pro will be not updated for Windows: fails with the error code 1 (0 x 000000000000001), which is a problem of language pack, version __Pro DON 'T SUPPORT SEVERAL LANGUAGES '.

  Windows colleagues for support.

  My windows install/windows update is broken; There will not be security critical update, installers fail with the error

  code 1, indicating a problem with language packs; I use widows 7 pro for software development.

  Several lanagues packs are not part of windows 7. should I upgrade to ultimate for your problem?

  More sophisticated repair attempt, SFC/scannow indicates corruption, but cannot fix it.

  Hand, install the update package out of work.

  Your opinion is welcome. I have

  Hey Hey Hey Doc K whadu say?

  I solved my problem;

  the problem was owner and permission on my programs, all users, the program data and my programs (86).

  As I type this i / m re - run SFC/verify only and a big pile of sucessfully some updates installed.

  What have I done? I took possession of the special directories above from "TrustedInstaller".

  Even when owned by TrustedInstaller, it does not have permissions. Some places I found rejection specific to the owner of the network.

  -What happened? Do you have a trusted Installer get stuck Mid-install?

  I took possession of SYSTEM, and made sure the CREATOR had every right, as in the SYSTEM and

  USER, AUTHENTICATED USER. I was perhaps too broad.

  I took possession, and then all of the repressed, updates windows are presented themselves to install,.

  and I expect /VERIFYNOW SFC before as I mark this as running.

  I'm fairly certain VS2008 and VS2010 now repair and install.

  Hmmm... always to see funny error message in SFC...

  We need a tool to give an overview of a directory tree ownership and permissions.

  dB

  Hey Hey Hey Doc K whadu say?