Installed new power supply does not start on HDD or boot disk
fans of working lights on the work of cd and dvd player. No monitor
What was the power (Watts) of the old PSU and the new?
Check the connections between the monitor and PSU. Disconnect, reconnect the power cord.
It must be a case of loose connections - primarily a hardware problem.
Man is the only animal that laughs and cries; because it is the only animal that is struck by the difference between what things are and what they should be.
Tags: Windows
Similar Questions
-
I have the same problem as this post 2013! Ouch. Pavilion HPE H8-1121 - new map chart + power supply, does not start after HP screen.
I installed a new power supply (Seasonic 620W), which works well. I also installed a GTX 660Ti last year and it was works fine as well. I recently bought a ZOTAC GTX 970 and attempted to install it, but it will not go beyond the blue HP screen and I get the same code of beeps (1 long, 3 short), who, seems, suggests that the video is not initialized.
My BIOS date is 2011.
Where can I find an update for this?
I'm also using Windows 10, which I found on the HP site is not tested on my model and would probably not favourable to good use. Should I do back up to 7 or 8? and then update the BIOS? Y at - it a update for my BIOS and where can I find.
In any case, I hope that this is a solution. Again, this is not a bad machine to be 5 years old.
Thanks for any help!
If the video card that you have purchased dose not a legacy vBIOS it will never start. An update of the BIOS doesn't solve that.
It is likely that your new video card has a vBIOS UEFI and that only is for the PC motherboards newer than yours which have a UEFI BIOS. Your motherboard has a legacy BIOS. 2012 is the year of model when the UEFI BIOS more or less became the de facto on motherboards standard.
I return it for a refund. Find the candidate of video cards that support the old BIOS. It can be inherited only or switchable vBIOS (legacy or UEFI) vBIOS. I suggest looking at the site of Sapphire Technology. ZoTac is not known to provide enough information about their video cards in the way. You upgrade a pre-built desktop PC and it's different and a little more difficult to set up a DIY PC. I looked at the site of Zotac and see that nothing is said about their video vBIOS cards. I would return to the map. Carefully read the specifications of the video card. A candidate for your motherboard card must have inherited vBIOS support or simply, it won't work.
ZOTAC (they don't say anything about their product vBIOS)
https://www.ZOTAC.com/us/product/graphics_card/GTX-970-amp-extreme-core
Sapphire Technology
http://www.sapphiretech.com/catapage_pd.asp?cataid=305&lang=eng
Because you look at game with 4 GB cards. Take a look at the following map. It has a double vBIOS. legacy and UEFI. http://www.sapphiretech.com/productdetial.asp?pid=640A98CD-0CF0-4191-B75C-CA2800111ADB&lang=eng
-
Hello *. *
First time here...
Compaq Presario Notebook Win7 32-bit - 4 GB DDR2, aged about 3 years?
A customer brought this with virus / malware issues - arranged.
On start-up, the bios made regular account that the HP OEM battery must renew. Not difficult technical question here.
Powered on the laptop without the battery and the pc has stopped completely after a few seconds. No beeps, no LED. Suspecting power, the original showed 19.* * volts. Ok.
Bidirectional p - s for another check the jack plug connection. No change, tried jumping jack plug connection.
Out two-way RAM for good, no change.
Two-way 2032 battery of the bios for good, not change.
Removed HARD drive, no change.Non-powered from DC or battery, depressed and button who was held for at least a minute, without change.
The bios battery removed for 30 minutes, without change.
Fan do not get stuck.
No attached devices.
Remarkable:
Without battery : white DC power LED stays on for about 5 seconds. And then off.
Old battery included: white DC power LED does not illuminate.
I did not remove the optical drive, because I think it's ok. Works fine (or used to).
I am familiar with this series of Presario laptops / laptops and while I have tried everything I know, I was wondering if, before I have conviction as having a short-circuit motherboard / failure, is there anything else I can try with this model of HP laptop before I am progressing with the send for repair of component.
Thanks in advance
Nick
Freelance technician PC technical support
Compaq Presario CQ71 CNF01002QT / WR067EA #ABF model CQ71-4142F - Dead - no power - no Boot - no led
With everything else has been tried, it does seem to be a hardware problem at the moment. It is more than likely isolated pay-per-view system, based on the symptoms. I'm sorry.
-
Dell Inspiron Laptop with Vista installed at the factory does not start.
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas: Dell Inspiron Laptop with Vista installed at the factory does not start. The display shows
Indicator of treatment MM061 series white 80% in all of the BIOS revision A13 treatment indicator always goes to the same place and stops. I tried to tap the F8 key, but nothing happens.
If you used Dell or the recovery Partition recovery disks to restore the system, you must talk about Dell problem because it's their software - not Microsoft. We don't know what's on it or its operation. We have no information to help us help you. You need to deal with them.
Sorry we can't be more helpful.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Windows XP does not start. Can I boot Windows from a disk so that I can recover the data?
Windows XP does not start. Can I boot Windows from a disk so that I can recover the data? This should be a CD because it doesn't have a floppy disk on my laptop drive. It is maybe that my hard drive has begun to fail and therefore cannot locate XP startup files. I can not start using one of the other methods of starting for example. Safe mode. If I can recover the data, I can then reload Windows and check the surface of the disc etc etc. Thank you all for your comments. Steve
Lately, I'm leaning toward the Hiren's BootCD you can download here:
On the left, click on download, scroll down, choose the most recent version
The download link is a little hard to see. It is at the bottom of the page, above the drop for older versions and looks like this (click this component to download the ZIP file):
Direct HTTP mirror + Torrent, Torrent Magnet
Click the "Live HTTP Mirror" link to start the download and save the ZIP file on your desktop of somewhere that you can remember.
The ZIP file is large, so the download will take probably some time to complete. Then unzip the download to extract theHirens.BootCD.ISO file that will be used to create your new bootable CD.
Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD. You must use software that includes how to burn a. ISO to a CD to create a bootable CD.
File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it. The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner. You can also use your own burning software as long as your software is able to create a bootable CD. ISO file. More modern burning programs can create a bootable CD. ISO image. Create a CD from an ISO image bootable is not the same as just the file on a CD burning.
If you need a simple and CD burning, this is a free software popular software:
Here are some instructions for ImgBurn:
http://Forum.ImgBurn.com/index.php?showtopic=61
It would be a good idea to test your new bootable CD on a computer running.
You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.
These adjustments are made before Windows tries to load. If you miss it, you will need to restart the system again.When starting on the Hiren's CD, you will see a menu of options. Choose Mini XP.
It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using. You will feel at home.
Using the Mini XP, you can access the Internet, maneuver around your system, copy files, replace the files, run the scans for malware, etc. There are dozens of free and useful tools included in the CD that can be used to repair your system, or copy files to another device such as a USB device or an external drive if drop in trying to repair your system.
If you want to see if you can fix your system, describe what is happening when you try to start and to answer these questions:
What is your system brand and model?
What is your Version of XP and the Service Pack?
Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?
-
p6745f: new graphics card does not start
I have a HP P6745f I decided to update my graphics card because the default map is not compatible with Adobe CS6. So I bought a new power supply 600w and a GeForce 750ti. The PSU works fine with the original card, but when I put the new graphics card, the machine does not start. Just of is located on the blue screen and beeps every minute or so.
I've scoured the forums and tried the bios update, but that did nothing. Any ideas?
Ericz, welcome to the forum.
750ti GTX requires UEFI in the motherboard instead of a standard BIOS. HP didn't start using UEFI until mid-October 2012. Your computer is released in 2011. The latter does not demand of UEFI cards were 640 GT.
Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.
-
After the new HARD drive does not start installation Qosmio G15
I just got this G15 last week and one of the hard drives was bad. Put it in a new Bay 2 and it does not start. I took it back and it starts fine. I even changed the main hard drive Bay 2 HD and it starts up fine with a hard drive. It's something to do with the scores, I think. Any help appreciated.
Hello
I think that the boot order has been the bad HARD drive in the BIOS.
At the new disk you do not installed any OS, and in my opinion, this is a reason for starting problems.
Simply access the BIOS and change the boot order -
Satellite A205-S5804 - after installing Microsoft sync, it does not start
Hello
This model uses by me. I downloaded it from Vista to XP.
After installing Microsoft Sync, you need to restart and my laptop does not start after that. HD is indicated and known on the BIOS.
Any help please?
BRHello
> After installing Microsoft Sync it requires a reboot and after that my laptop does not start.
And it does n average boot t?
You get an error message? The laptop freezes on start up? Do you get a BSOD?I put t know how you can solve this problem, but can you go into the advanced boot menu? You can start in safe mode?
In my opinion Microsoft installation synchronization destroyed something in Windows and in the worst case, reinstall the whole OS.
:( -
Error: 80070426-Windows Update may not install as Cryptographic Services does not start.
Hello!
As you can guess Windows Update is not installed for a few months. Cryptographic services does not start . CPP is the beginning.
Error: 80070426
Already tried a few suggestions MSKB.
Method 2: Set Cryptographic Services to automatic, network logon. Result: Error (unsigned) 1083
Method 3: Rename the Catroot2 folder
Reregister DLL files that are associated with Cryptographic Services.
However, suite couldn ' t be installed.regsvr32 initpki.dll
regsvr32 gpkcsp.dllregsvr32 sccbase.dll
regsvr32 slbcsp.dllDCOM service - access denied when running.
sfc/scannow couldn't fix some corrupted files.
Computer HP laptop came with Vista pre-installed, so I do not have the repair disk.
No doubt the system restore won't help, as I remember recently that c-Cleaner wiped the old restore points.
NOD32 Antivirus + Spyware Doctor still running. Already run MSRT and Super Spyware, but nothing much.
Kindly help!
Kind regards
Satyajit
Diagnostic report (1.9.0011.0):
-----------------------------------------
Given WGA-->
Validation status: genuine
Validation code: 0Code of Validation caching: 0x0
Windows product key: *-* - GD2PK - BD3R2-44MV3
The Windows Product Key hash: f7FPE6g/CLFmnJ4E6GbEU9Xn1sA =
Windows product ID: 89572-OEM-7332166-00021
Windows product ID type: 2
Windows license Type: OEM SLP
The Windows OS version: 6.0.6000.2.00010300.0.0.002
ID: {5FC29B42-80DC-4BE3-B5EA-37281853FA7D} (3)
Admin: Yes
TestCab: 0x0
WGA version: registered, 1.9.9.1
Signed by: Microsoft
Product name: Windows Vista (TM) Home Basic
Architecture: 0x00000000
Build lab: 6000.vista_gdr.080917 - 1612
TTS Error: M:20091104073513946-
Validation of diagnosis:
Resolution state: n/aWgaER data-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: 6.0.6002.16398WGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 103 blocked VLK
Microsoft Office Enterprise 2007 - 103 blocked VLK
Microsoft Office Home and Student 2007-100 authentic
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 77F760FE-153-80070002_7E90FEE8-175-80070002_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_B4D0AA8B-920-80070057Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 7.0; Win32)
Default browser: C:\Program Files\Mozilla Firefox\firefox.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
[File mismatch: C:\Windows\system32\Slsvc.exe[6.0.6000.16509]
[File mismatch: C:\Windows\system32\drivers\Spsys.sys[6.0.5840.16389]
[File mismatch: C:\Windows\system32\Slcext.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\advapi32.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\kernel32.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\rpcrt4.dll[6.0.6000.16525]
[File mismatch: C:\Windows\system32\authz.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\msvcrt.dll[7.0.6000.16386]
[File mismatch: C:\Windows\system32\samlib.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\ntdsapi.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\dnsapi.dll[6.0.6000.16615]
[File mismatch: C:\Windows\system32\ws2_32.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\nsi.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\user32.dll[6.0.6000.16438]
[File mismatch: C:\Windows\system32\gdi32.dll[6.0.6000.16766]
[File mismatch: C:\Windows\system32\msimg32.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\powrprof.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\setupapi.dll[6.0.6000.16609]
[File mismatch: C:\Windows\system32\oleaut32.dll[6.0.6000.16609]
[File mismatch: C:\Windows\system32\ole32.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\shell32.dll[6.0.6000.16774]
[File mismatch: C:\Windows\system32\shlwapi.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\version.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\winmm.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\oleacc.dll[4.2.5406.0]
[File mismatch: C:\Windows\system32\mmdevapi.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\wtsapi32.dll[6.0.6000.16553]
[File mismatch: C:\Windows\system32\regapi.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\crypt32.dll[6.0.6000.16425]
[File mismatch: C:\Windows\system32\msasn1.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\userenv.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\secur32.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\netapi32.dll[6.0.6000.16764]
[File mismatch: C:\Windows\system32\psapi.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\netrap.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\wldap32.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\winbrand.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\iphlpapi.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\dhcpcsvc.dll[6.0.6000.16512]
[File mismatch: C:\Windows\system32\winnsi.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\dhcpcsvc6.dll[6.0.6000.16512]
[File mismatch: C:\Windows\system32\gpapi.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\slc.dll[6.0.6000.16509]
[File mismatch: C:\Windows\system32\gpsvc.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\sysntfy.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\winsta.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\nlaapi.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\ncrypt.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\bcrypt.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\mpr.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\credui.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\cryptui.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\wintrust.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\imagehlp.dll[6.0.6000.16470]
[File mismatch: C:\Windows\system32\dbghelp.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\mssign32.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\wininet.dll[7.0.6000.16809]
[File mismatch: C:\Windows\system32\normaliz.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\iertutil.dll[7.0.6000.16809]
[File mismatch: C:\Windows\system32\tapi32.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\rtutils.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\rasapi32.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\rasman.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\rasdlg.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\mprapi.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\activeds.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\adsldpc.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\atl.dll[3.5.2284.0]
[File mismatch: C:\Windows\system32\certcli.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\winscard.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\netplwiz.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\urlmon.dll[7.0.6000.16809]
[File mismatch: C:\Windows\system32\propsys.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\xmllite.dll[1.1.1002.0]
[File mismatch: C:\Windows\system32\mlang.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\advpack.dll[7.0.6000.16809]
[File mismatch: C:\Windows\system32\apphelp.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\msiltcfg.dll[4.0.6000.16386]
[File mismatch: C:\Windows\system32\shunimpl.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\devmgr.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\newdev.dll[6.0.5054.0]
[File mismatch: C:\Windows\system32\dwmapi.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\winspool.drv[6.0.6000.16386]
[File mismatch: C:\Windows\system32\cscapi.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\uxtheme.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\windowscodecs.dll[6.0.6000.16740]
[File mismatch: C:\Windows\system32\ntshrui.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\feclient.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\shdocvw.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\browseui.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\imm32.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\msctf.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\duser.dll[6.0.6000.16386]
[File mismatch: C:\Windows\winsxs\x86_microsoft.windows.gdiplus_6595b64144ccf1df_1.0.6000.16386_none_9ea0ac9ec96e7127\gdiplus.dll[5.2.6000.16386]
[File mismatch: C:\Windows\winsxs\amd64_microsoft.windows.gdiplus_6595b64144ccf1df_1.0.6000.16550_none_56f0fd51b4f462f8\gdiplus.dll[hr = 0 x 80070002]
[File mismatch: C:\Windows\system32\msrating.dll[7.0.6000.16386]
[File mismatch: C:\Windows\system32\ieframe.dll[7.0.6000.16809]
[File mismatch: C:\Windows\system32\msi.dll[4.0.6000.16386]
[File mismatch: C:\Windows\system32\mshtml.dll[7.0.6000.16809]
[File mismatch: C:\Windows\system32\msls31.dll[3.10.349.0]
[File mismatch: C:\Windows\winsxs\x86_microsoft.windows.common-controls_6595b64144ccf1df_5.82.6000.16386_none_87e0cb09378714f1\comctl32.dll[5.82.6000.16386]
[File mismatch: C:\Windows\winsxs\amd64_microsoft.windows.common-controls_6595b64144ccf1df_5.82.6000.16386_none_40339432230aebeb\comctl32.dll[hr = 0 x 80070002]
[File mismatch: C:\Windows\system32\comdlg32.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\printui.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\cfgmgr32.dll[6.0.6000.16609]
[File mismatch: C:\Windows\system32\puiapi.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\hlink.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\imgutil.dll[7.0.6000.16386]
[File mismatch: C:\Windows\system32\usp10.dll[1.626.6000.16386]
[File mismatch: C:\Windows\system32\inetcomm.dll[6.0.6000.16669]
[File mismatch: C:\Windows\system32\msoert2.dll[6.0.6000.16480]
[File mismatch: C:\Windows\system32\ieui.dll[7.0.6000.16809]
[File mismatch: C:\Windows\system32\efsadu.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\mfc42u.dll[6.6.8063.0]
[File mismatch: C:\Windows\system32\odbc32.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\oledlg.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\linkinfo.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\query.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\clbcatq.dll[2001.12.6930.16386]
[File mismatch: C:\Windows\system32\cabinet.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\scecli.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\w32topl.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\rpchttp.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\winhttp.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\fwpuclnt.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\ktmw32.dll[6.0.6000.16386]Other data-->
Office details:{5FC29B42-80DC-4BE3-B5EA-37281853FA7D} 1.9.0011.0 6.0.6000.2.00010300.0.0.002 x 32 *-*-*-*-44MV3 89572-OEM-7332166-00021 2 S-1-5-21-3747016915-1105364745-1034703816 Hewlett-Packard laptop Presario V6500 Hewlett-Packard F.2A A4313507018400EE 4009 0409 India Standard Time(GMT+05:30) 0 3 HPQOEM SLIC-MPC 103 103 12 C0A25836FDBE5AC FmDbcrRY1pTOcrz4ZUZRHhpUuc0 = Microsoft Office Enterprise 2007 89388 726-2958074-6564314 100 Microsoft Office home and Student 2007 12 19 Spsys.log Content: U1BMRwEAAAAAAQAABAAAAC58AgAAAAAAYWECADAgAADCBCA/81zKARhDs/4hWdo7Xkl9D+HKpni6Sfv7jmoHEBVqqW/xcrQYytms9RtRtLWsIPXcLJpmwOfDvX0zCybmDilyQLttVIyTRhimAiUiBLOYhz3eEQj3sEGnmR0ReJ9KlWCJouxq6PAIwHwHVMfvNauSbFvmaTCDPKtQZQFIQcDXIAwFGl6D9S/GUDYecePFRKM/leS97bxOVVm9fICZUkfHdDNbo72qUqYYmAlRJO05+WV1r70w2O6Pl99gqTnSYR4j0FashTOQ1ifb1stzrqx+w3WNaAwzkNYn29bLc66sfsN1jWgMM5DWJ9vWy3OurH7DdY1oDDOQ1ifb1stzrqx+w3WNaAw=
License data-->
The software licensing service version: 6.0.6000.16509
Name: Windows Vista HomeBasic edition
Description: operating system Windows - Vista, channel OEM_SLP
Activation ID: 199086aa-6cb8-4e5b-b698-f2be56f1e8ee
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 89572-00146-321-600021-02-16393-6000.0000-0492008
Installation ID: 234075993312598255872244522405847072649516093605215141
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkId=57201
The machine certificate URL: http://go.microsoft.com/fwlink/?LinkId=57203
Use license URL: http://go.microsoft.com/fwlink/?LinkId=57205
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkId=57204
Partial product key: 44MV3
License status: licensed--> HWID data
Current Hash HWID: QAAAAAEABwABAAIAAgABAAAAAwABAAEAnJ9ERYTHdhu84yC + gASIzAaYmGC6ZEQsznDy9J4v6lrYfiqsrFZ4qg isActivation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0 x 20000
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC APIC PTLTD
FACP NVIDIA MCP67-M
SRAT AMD HAMMER
HPET PTLTD HPETTBL
START PTLTD $SBFTBL$
MCFG MCFG PTLTD
TCPA Phoenix x
SSDT PTLTD POWERNOW
SLIC SLIC-MPC HPQOEMThank God!
Finally, I worked it out myself. But it's painful to watch than virtually any other that Uday has responded to my problem. Something I've been waiting for so eagerly.
I applied my common sense and defragmented the dirives then sfc/scannow, and it worked. Cryptographic Services said when I began to log in as network account. So my problem is solved. Now, windows update works fine.
Interestingly, Microsoft Fix it, says it cannot start the Cryptographic Services. Are God, while the _____ you supposed to difficulty? It made Internet Explorer icon on my desktop and other places.
-
I get the logo and the system beep. Seems to hang for about 2 minutes then tricking black screen reboot and select proper boot device or insert boot media in selected boot device and press a key. When I insert the dvd-rom supplied with the pc recovery, it takes about 4 minutes for so-called load windows and off to install windows for me. No matter what I select, I'm only able to download the drivers that may be defective and then find and I can retry or cancel. If I try again once I get the same cycle but I can't get into windows, nor can I access any of the disk recovery tools. I can't enter the Bios or any other file. I tried power market and stop and start cold without result. The pc was in hibernation because of non-use, but had been shut down when the crash occurred. It is on a surge protector. I could really use some help and appreciate suggestions - I'm a little computer but certainly not a tech guru. Thanks for any help.
Hello
· What is the brand and model of the computer?
· What exactly happens when you turn on the computer?
· You get the error message?
If you are not able to boot in the BIOS there is a problem with the hardware. I suggest you contact the computer hardware manufacturing for this problem.
Also check out the link below and check if it helps:
What to do if Windows does not start correctly
http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly
-
Satellite M30-107 does not start successfully after using recovery disk
Hello
I recently got my hands on a toshiba Satellite M30-107 laptop second hand and decided to freshen it.
I used the toshiba recovery disk, but after that the laptop is no longer support windows.When turned on it shows booting Toshiba disc for about a second then goes to a screen blank and freezes.
When turned on, once again, a screen will appear an error by stopping and offer the opportunity to start in SafeMode etc but choose one of the options causes the machine to freeze.Any help or advice would be much appreciated.
Thank you
JTHello
Sounds a little like the laptop does not start because of the problem of Windows software
You did not recover the M30 with the original Toshiba that was provided with this device M30 recovery CD?I may be wrong, but to me it looks like a recovery CD incorrect has been used and an image with drivers not compatible m has been installed
You can try to install the OS of Microsoft Win XP original CD and could check if it would be possible to get the notebook ruin using own BONE.
In this case we (you and me ;)) might know if this problem could be related to hardware or software.
Good bye
-
Update of Firefox does not, so I re-installed. Now firefox does not start at all?
Yes firefox, I started one morning, and I saw that it has been updated. After waiting, the notification saying "firefox is updated" crashed so I had to shut it down. When I started firefox again, he stated that the update failed, but less than a second after that notification skipped upward, it crashed also. He continued doing this, so I followed some instructions on the internet, re-installed firefox (without deleting the data of a personal nature), but now, firefox won't start at all!
Now what?
Unfortunately, I never submitted before incident reports, so the folder does not exist in my computer
But the good news is that I tried running in windows safe mode, and it worked, then after returning to normal windows, it did not work. After waiting a while, now it works again, so I guess this can be considered resolved now
-
I have a T61 with XP on it. The factory hard drive was beginning to show its age, so I got a 500GB WD Black drive for her. I used Acronis True Image to clone the old hard drive to the new. I used my counter top to do the cloning. When I plug the new disk in, the cursor just blinks and it will not start.
I thought that maybe the clone was bad, so I put the new drive hard back at the top of my desk and is able to boot all the way to the windows start screen. If I plug the old drive in the laptop, it starts very well, simply refuses to boot from the new drive.
Guessed it.
Put the new hard drive into the computer, put the old hard drive in a USB enclosure and done a CD boot Acronis, and made the clone of the laptop. Runs like a champ and now flies.
-
I have a PC running windows XP and it seems to be a virus when the computer starts and arrives at the log on screen. Once I log in, the background appears saying 'safe mode' in each corner of the black screen and an error box appears saying "failed to start Windows. Press 'OK' to repair the startup failure. Then, a diagnosis of FAKE windows disk rises and scan the computer. I really need help and all the fixes involve downloading something and I can not even access my desktop please help im not a computer genius! Also I do not know the specs of my PC because I can't go to windows to get them! :'(
I think that the difficulty with myantispyware site is to know what type of malicious software that you have?
I have this same problem on a friends laptop - I started out in a PE environment and run a couple of different recovery CD of AV companies but the problem remains. I also tried to go back to using System Restore, but it did not work either.
On a work computer download SuperAntiSpyware Portable version from the link below save it on a USB key. Take the USB to the infected computer. Start the computer in safe mode with command prompt. Press Ctrl + SHIFT + ESC. The Task Manager opens. Click file > new task > type explorer.exe > press Ok. Navigate to the flash drive > right click > Explorer. Locate the SuperAntiSpyware file > right click and choose Run as administrator.
I met recently a few new malwares of thugs that are loaded in safe mode effectively preventing you to download or install anything. For reasons unknown to me from the computer in safe mode with command prompt and then run taskmgr explorer.exe prevents malware to load. This method has worked several times for me this week only. Worth.
Superantispy-portable < this="" is="" a="" portable="" scanner="" that="" does="" not="" install.="" it="" can="" be="" run="" directly="" from="" the="" thumb="">
-
BootCamp Windows does not start after you have enabled disk encryption
Hello everyone, I am in a desperate situation and I need your help. Here is my sitatuaion.
I have 13-inch MacBook Pro (early 2011). I put an SSD inside as my main drive and I also put an extra drive (HDD) in the optibay instead of my drive superdrive. The structure, I had was this:
(1) my entire SSD was my OS X disk.
2 my HDD optibay had three partitions: partition backup Time Machine, a) b) Extra partition (for stuff like media), c) Windows partition with Windows 7 installed.
Had that Setup for a long time and everything worked very well, my SSD has been saved on the Time Machine partition on the HARD drive in my optibay.
Then, I decided to turn on the File Vault 2. First of all I did for the SSD with my OS X on it. Everything went well and I could always start my Windows 7. Then, I decided to encrypt my Time Machine backup (because what's the point to encrypt the main system disk if you do not encrypt the backup as well?) -Here too everything went well.
In other words, until I needed to start Windows. I have restarted my Mac, hold down option, the picker contraption came, but there was no windows to the choice. I came once before (but), so I knew I could always start in it.
I jumped into my USB thumbdrive with fairing on it, he chose and he gave my start on the Windows partition option. But this time it did not work, I got an error message saying my there is no bootable device or something like that.
I have confidence in turning the things of encryption for the partition of Time Machine (which is on the same HDD as my Windows partition) screwed disc here.
The only question is: can I fix, start Windows, without having to install it from scratch? What I want is to have encryption enabled for both drive my main SSD where I have my OS X installed AND the partition of Time Machine that is on the disk in the optibay HARD and also have a Windows partition on it, but still be able to start Windows.
I am running 10.11.13 El Capitan.
Can you help me somehow? Here is my list of cs diskutil:
/ dev/disk0 (internal, physical):
#: NAME SIZE TYPE IDENTIFIER
0: GUID_partition_scheme * GB 128,0 disk0
1: disk0s1 EFI EFI 209.7 MB
2: Apple_CoreStorage Macintosh 127,2 disk0s2 GB SSD
3: disk0s3 Apple_Boot Recovery 650.0 MB HD
/ dev/disk1 (internal, physical):
#: NAME SIZE TYPE IDENTIFIER
0: GUID_partition_scheme * GB 500,1 disk1
1: EFI EFI 209.7 MB disk1s1
2: Apple_CoreStorage Time Machine 150.0 GB disk1s2
3: disk1s3 Apple_Boot Boot OS X 134,2 MB
4: Apple_HFS Extra 300.0 GB disk1s4
5: Microsoft Windows 49.5 GB disk1s5 data base
/ dev/disk2 (internal, virtual):
#: NAME SIZE TYPE IDENTIFIER
0: Apple_HFS Macintosh SSD 2 GB + 126.8
Logical volume on disk0s2
406F3A62-89AE-4F91-BEEF-B8CE0B16C8EF
Unlocked encrypted
/ dev/disk4 (internal, virtual):
#: NAME SIZE TYPE IDENTIFIER
0: Apple_HFS Time Machine disk4 GB + 149.6
Logical volume on disk1s2
0567D276-3738-4776-9CC5-B69F922B0A0C
Unlocked encrypted
Your problem is not related to FileVault2. Your question should have begun when additional Apple_HFS was created. Please after the release of
sudo fdisk/dev/disk1
If you have a problem with your Mac, you can potentially lose the SSD and backup TM. It is not an optimal configuration. A TM must be physically separated from your Mac, so you can restore the TM backup to a new Mac, if necessary.
Also, since you removed the optical drive, re - install Windows on your 2011 model is a very rough road to travel.
Maybe you are looking for
-
How can I open the "to:" area of a message to find out who it was sent?
Some messages arrive with many recipients. I want to know who they are, if possible.
-
For the last three hours, Twitter has not updated and whenever I have update it just hangs and does nothing. I have disconnected and connected and receive nothing. I have also deleted/cleaned everything out of history/cache and still no joy. If I sta
-
TouchSmart iq816 hibernation / sleep not working right
I had to have the hard drive replaced. Everything works on my system, but the Hibernate / sleep doesn't really seem to be getting into the appropriate mode. I think it is just turn off the monitor. Ambient light remains on, the reader, in my view,
-
Is there an Add on XP Mode for Windows 7 Home Premium?
Is there an Add on XP Mode for Windows 7 Home Premium?
-
I have no audio output device is installed
HELP ME PLZ! I have an IBM T60p Microsoft laptop and when I try to ring it say on the icons of Nofifcation area under volume 'no Audio output is insalled' I don't know what is the meaning of the present but, my dad said "I know that some laptops Micr