Installing HP printer on USB port

Similar Questions

• How device you can run a USB 2 printer on usb port 3?

  I am running 7100 Lexmark printer / scanner which is a USB 2 WIN 7 on a usb port 3 WIN 8.  Printer throws several different including "error cartridge 1203" error messages and do not print.

  Any ideas.  Lexmark so far does not have a driver for the x 7170 with WIN 8 compatibility.

  I am running 7100 Lexmark printer / scanner which is a USB 2 WIN 7 on a usb port 3 WIN 8.  Printer throws several different including "error cartridge 1203" error messages and do not print.

  Any ideas.  Lexmark so far does not have a driver for the x 7170 with WIN 8 compatibility.

  Hello

  This looks like a driver compatibility problem.

  USB 3.0 ports are designed to be backward compatible with USB 2.0 devices. When you connect a USB 2.0 device to a USB 3.0 port, the unit will simply operate at USB 2.0 speed.

  Lexmark support - select a product:

  http://support.Lexmark.com/index?page=productSelection&channel=supportAndDownloads&locale=en&UserLocale=en_US

  If Windows 7 drivers are available, try installing the driver in Compatibility Mode.

  1. download the driver for the previous version and place it on your desktop.

  2. right click the driver installation file and select Properties / Compatibility tab.

  3. place a checkmark in run this program in compatibility mode for.

  4. in the drop-down menu, select Windows 7.

  5. click apply / OK.

  6. right click the Setup file and select run as administrator .

  Let us know the results.

  Concerning

• I can't HP printer works again. Configuration, driver, switch print or USB port does not.

  I got the printer doesn't work after downloading the update and the usefulness of HP. They were put in a folder of Tamp, I think.  New utility and install HP downloads don't work this time. In addition, cat pulled the printer USB cable and I don't know where it was connected to. Message Windows XP says out connection or something about switch printing don't no configuration?  I don't understand any of this, can someone ' a please talk me through it? I have a lot of work piled up, legal and medical stuff and really need my printer.

  Hello

  What is the model number of your printer?

  It is sufficient to indicate the complete error message you receive.

  
  Method 1: you can refer to the documentation that came with the printer for printer connections. You can check the following HP link

  http://www.HP.com/United-States/consumer/everyday-printing/Wireless/USB-wireless-setupb.html

  
  Method 2: you can see the steps outlined in the article below to solve printer Windows XP problems

  Resources for the resolution of the printer in Windows XP problems

  http://support.Microsoft.com/kb/308028

• someone knows how to install a printer via USB?

  Normally, I get a pop-up window or the ability to install a printer through settings?

  Hello

  No, you can't do this with Android, you need a software such as:

  https://play.Google.com/store/apps/details?ID=com.HP.Android.print&hl=en

  (Your printer must ALSO support this).

  Kind regards.

• install the printer with usb for premium office jet 6500

  What are the steps to install an office jet 6500 aio Printer printer using a usb connection

  Hi palmtreebob

• Satellite L50-C-215: failure to install Win7 via the USB port, pb and toshiba.bg bug ' workshop

  Satellite L50-c-215 is a laptop sold without optical drive or OS.

  We bought it today.

  
  Questions:
  -We were told "it is compatible with windows 7", but what a salesman said, everything can be downloaded from the Web from Toshiba site
  -While watching the Web from Toshiba site, a link says 'no system operating inside'. Link is corrupt
  -2 "official" companies are listed for the Bulgarian Web from Toshiba site are wrong: nobody told on the phone that they are not official support from Toshiba

  
  Technical questions:
  -J' tried to put several Windows 7 ISO on a USB key, using the official Microsoft tool and Rufus, but I got error that says "CD/DVD Driver is missing."
  -In some forums, it is said that test the spirit of the thing that a USB 2.0 can solve if USB 3.0 will fail. Each USB failed.
  
  Sales question:
  -Although the European commercial law says people have a little more time to restore a non-working product and be reimbursed, when we returned to the computer at the Technopolis shop a few hours after the purchase, employees told us ' problem is not hardware: we do not cancel the sale, we can take over the computer and give your money. " "Problem is software: see with Toshiba.
  The best we could get was the address of a computer service non-Toshiba to try to ask if they might be able to install Windows 7

  
  I already spent half a day working on it
  What can we do to install Windows 7 or get the computer returned and refunded?

  Tried Tnings at night:

  -> Intall Ubuntu 12.04: card WiFi can't work, no Ethernet cable to update from the Internet

  The drivers are on the website of Intel, but solution install require packages to download on the internet, not USB

  -> Last Debian version: error starting in the command line

  -> 14.04 installed, Ubuntu box checked during installation to use the Intel Wifi device
  Re: software WiFi cannot connect. Spent a few hours on forums to try to understand how to install the Intel USB drivers. Does not work.

  For people who want to buy this model, try to get a player of optical disk to install Windows, a good cable to Linux, update or be prepared to spend time and money for the service simply be able to use the computer.

  Oh, another thing: Technopolis company is not able to provide you with enough information before buying a product. I will not say that they rip off, but almost: especially to overseas buyers, buy refusal refund to anyone who is not able to have an argument that was screaming in Bulgarian with them.

• LaserJet P1102w, why not install it via the USB port on a second system to dual boot Windows XP/Windows XP?

  A seriously paralyzed malware on my laptop Dell Inspiron 1318 running Windows XP Professional SP3 with 3 GB of memory. Some key files have been deleted, and I can't open all .lnk files. After some research, my solution was to start from a clean format. However, I have some programs on the old system that I really need and impossible to reinstall on a new system. So, I chose to install a new WinXP as a dual boot on a separate partition (I have also a third partition that I use for user files); keep the old system for when I really need.

  After installing the new WinXP, the detector material caused my LaserJet P1102W printer install pop up box. I was busy to install other drivers at the time so I canceled the installation of the printer later. When I came back to him, he went for the bulk of the fine saves but then abruptly stopped, saying: "the printer installation failed. On the HP site, I went through all the HP printer Diagnostics steps without good results.

  I really want to get this printer working on my new system. What can I do?

  No problem. Since you are the author of the post, you should see a black button with "Accept as Solution" next to the reply button. If you don't see it, make sure that you are connected and try again. If still can't get it, you can click the link inappropriate content report and ask the moderators to mark the solution for you. Hope that helps.

• Can I set up my printer with USB port and wireless?

  Yes, you can connect your printer wirelessly to the top and the USB. If you have 1 computer connected to the USB printer, you can also download the software and drivers for computer #2 and wireless connection.

  On the printer, you will need to put it on the network (router).

  If you need assistance, please be sure to ask. You can connect several computers to the wireless printer, but could only be plugged into the USB cable.

  Hope this helps everyone.

• Photosmart 7960 installed via the USB port on the PC under Win XP Pro acting as a print server

  I have a PC running Windows XP Pro, which acts as the home network file and print server.   The Photosmart 7960 is connected to this computer via a USB cable and configured to be "shared".   When I go to "Add a printer" on another PC, in Windows 7, which is also part of the same network, I can navigate to the 7960 correct, but the installation wizard is unable to find the driver for Win 7.  I still have what in the HP see basic documents that tells me how to add this shared printer on my Win 7 PC.  Looking at the support page drivers I saw that Windows 7 already has the driver.  True, but the only way, it seems that I can get to it is to connect the printer directly to Win 7 PC via a USB cable.   Any suggestions?

  Apparently, the solution is as follows.  First connect the photosmart 7960 directly to the PC running Windows 7 via USB cable network.  It will be auto-install drivers.  Reconnect the printer to the PC under XP pro server.   From the PC running Windows 7 where you have installed the printer via USB, you can go ahead and remove the photosmart 7960 from the list of printers; This will not remove the just downloaded drivers.  Next, select Add a printer, and then select 'Add a local printer' (no network).  Select 'Create New Port' and click Next.  In the next dialog box, type the name of the host server and the name of the printer.  In my case, it's \\mainserver\HP photosmart 7960. Click Next.   In the "Install the printer driver" dialog, click "Hewlett Packard" and find the 7960 in the printer list and click Next.  I was able to successfully install the printer this way.

• How to configure a printer LPT when adapted to use a USB Port - Windows Vista Home Premium 64-Bit

  I have a computer that does not have an LPT port, and the printer that I want to use (EPSON Stylus Color 850) is not a USB Port or Ethernet.  I bought a cable USB2LPT and attempted to get the printer to work.

  My problem seems to be the choice of the port to use.  Here are the steps I followed:

  1. pick "Add a printer" of the control panel. Printers
     2 choose 'Add a local printer' (even if using the USB Port, like when I plugged the USB cable into the computer, I received the message installing driver recognition but not familiar "bong".)
     3 selected "use an existing port.
     4 select "USB001 (virtual printer to USB Port) - it was my best estimate of the long list provided."
     5 choose the EPSON Stylus Color 850 ECP2/PCS.

  The pilot was then installed without error and tried to print a test page which is that hangs without error.

  I deleted the printer then tried to assign the LPT1 port.  No help here either.

  If someone can help me with the installation, so I can get my documents to print I would appreciate it a lot.

  Thank you

  Dave

  You do not have an LPT port.  When you select the LPT port data are always written him even if your computer does not have the hardware installed to make it work.  It would work if you have installed a parallel PCI Port card.

  USB001 would be the first choice, then USB002...

  The next step as Fouzan points out is to contact the supplier of cable or Epson for support of printer you.  Start by Epson.

  You can try other cables, parallel PCI card or another printer. Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• Satellite A300D - 14 p - cannot install network printer

  I A300D - 14 p Vista 32 and the other a PC running XP Pro SP3.

  This PC is connected to the printer by USB port.
  I can see this printer on home network (Wi - Fi).
  When I try to install printer to A300, I get the message "I can't install it. Memory is not enough.
  What is the possible solution?

  Thanks in advance.
  Concerning

  How are you trying to install the network printer?
  Make a double click on it or something?

  Well, the PC with the printer should provide Vista drivers if you double-click it to install it because the PC is running Windows XP.
  But you can also download and install the printer drivers on your PC and then choose the network as port or IP address.

  Check it!

• How to install a HI-SPEED USB?

  I need to install a port HI - SPEED USB 2.0. How can I do?

  This method works only on desktop with PCI expansion slots (if you are not sure if you have one, post the make and model your PC etc and I'll find).

  Buy one of these external USB 2 ports PCI cards: http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&DEPA=0&Order=BESTMATCH&Description=pci+usb

  How to install a PCI card: http://www.ehow.com/how_4780440_install-usb-pci-card.html

  You can not install a new/extra USB port on your laptop or desktop without a PCI slot.

• USB port is not HARD drive docking station

  I am using a USB docking station to retrieve data from a HDD to EIDE WD Caviar.  When I plug the engine up to the docking station with the installed drive in the usb port, the PC is not as he knows that something is connected to the port.  PC just does nothing...

  -E-

  HP Pavilion 500-214

  Earn 8.1

  ALERT, your docking station - not for Western Digital drives by seller info, see here.   Order the adapter that I recommended.

• HP M1212nf Mfp printer installed via USB Port

  I checked all my software and hardware, but when I install the printer using the printer installation disc works. But when I turned my computer off and restart the computer, the printer does not print. The printer indicates a default printer and the printer says ready, but I get nothing. I can re-install and get it printed, but it disconnects when I turn off my computer. I have another printer Dell I can go to and it will be printed, but HP will not.

  HP printer to a USB port facilities requires installation of driver CD must be started before the printer is connected to a USB port.

• USB ports no longer works after L7680 OfficeJet Pro printer installed...

  I am running Windows XP Pro SP3.  Before you load the printer all my ports worked (4 on the monitor, 2 on the front of the PC).  Once I'm installing all of them stop working.  The only option is to work with one on the front of the printer.   I am able to get my Western Digital HD to work on the USB port printer, but this one is fickle and only works sometimes (I have to restart to operate when it gives out).  I'm not able to use on the printer port USB flash drives. I f the usb port on the printer does not work, so I have no options.  I tried with a powered hub and it works at all.

  I was chatting with representatives of HP without result. If a HUB on the printer does not work it is a useless tool for me.  I need one that has no readers, etc.  Is this a reason to return to the item under warranty?  Or y at - it a way to get this thing to work.

  HP wants to tell me it's Dell.  Dell says it's HP.  I'm so confused and frustrated.

  What I discovered, after about 3 years, the computers are generally obsolete.  My computer was 1.1 ports and the printer connection 2.0.  As see you all new USB components say they are 2.0, but can work with 1.1.  Long story short, after reading this somewhere, I decided that I had to upgrade my ports.  I went to Microcenter (they have an online store as well) and bought a USB 2.0 PCI Card for $11.00.  At opened her top and broke in the new port and everything works well again.  It may not be what you want to hear, but it was all I could do.  I was told all empty printer resources USB and this is why the upgrade was necessary.  Hope this makes some sense to you.