I can't HP printer works again. Configuration, driver, switch print or USB port does not.

Similar Questions

• Satellite Pro 6100: USB port does not work after the return of the mode "Eve"

  I have a strange error on my USB ports on Satttelite Pro 6100 with XP SP2.

  Two USB 1.1 ports work fine after cranking up what the laptop goes into mode 'sleep' (automatically or manually).
  The restart afret optical mouse connected to the USB port does not illuminate and the XP system displays the error message on the device not recognized on USB port.

  Plug the mouse on or off doesn't change anything. Only restart helps.

  Any ideas?

  It's very strange, but it will be interesting to see if the same problem persists with other USB devices. Can you test and post again on the results?

• NB200-12N - USB port does not work

  Hello

  I updgrade my OS from windows 7 starter edition to now a windows 7 home basic 32-bit usb port does not work is the (only) in the left near card reader sd and lan.
  Can you please hellp me to install it? I have download the drivers from Toshiba for my NB200
  But does not work.

  Thank you

  Paulo

  If everything is OK and right drivers all USB ports should work. You cannot install the drivers for each port separately and force one of them to work properly. On this machine, all three ports are the same USB2.0 ports.

  Try reinstalling the chipset utility.

  By the way: two other ports work well, right?

• Satellite L650 - 12N USB Ports does not work

  My satellite L650-12N usb port does not work. I did everything that I could and it does not work.
  It shows a yellow exclamation mark on my system.

  I try so many ways, including the recovering auto troubleshooting, formatting and system he could not work.
  Under the key USB gives error code 43, I do not understand.

  The webcam and the wireless card no more.
  This boot problem after a storm in my area some time ago.

  Please can someone help.
  Thank you
  Sani

  Hello

  > This problem start after a storm in my area some time ago.

  Because other devices don't work properly and because procedure didn t get it back help you solve this problem, I think that the problem is related to the hardware malfunction possibly that the motherboard was hit by lightning, which would explain the problems

  I think you should ask the maintainer authorized Toshiba in your country to check the motherboard.

  But in my opinion, that the warranty does not cover the issues of environmental impact maybe your household insurance could help you

• El Capitan USB port does not worked well under Yosemite.

  Running a VMWARE image of the Linux kernel using a Sentinel of SafeNet USB license dongle canned.
  Has worked perfectly under Yosemite unfortunately too long to go back.

  The USB port does not work with other USB devices?

  I suspect an incompatibility with the EC and the sine of dongle USB EL strengthened using third kexts. They must be signed, and so a softer update for the dongle is probably necessary.

  http://arstechnica.co.UK/Apple/2015/09/OS-x-10-11-El-Capitan-the-Ars-Technica-re view/8 / #h1

• USB ports does not work

  I intend to reset my laptop to factory settings by having the PC clean up the hard drive and reinstall Windows 8.  Before I do, I'm copying the files on my flash drives. I have a moment (I'll call him 'A') is a 32GB (brand new, he got today) which is/has been formatted with diskpart (so I can use it to create a recovery partition).

  About 78-80 percent of the formatting of diskpart, I put in my latest flash player (I'll call it 'B') to copy some various files that do not have to be copied, but thought I'd for a while once the laptop has reset.  Unfortunately, as soon as Flash Drive 'B' has been plugged in, my mouse work anymore (so I just unplugged thinking the battery died), and the laptop does not save Flash drive 'B '. I tried to put the other 2 ports USB that were not used, same thing, the laptop does not save it. I refused to get out of Flash Player 'A' because it is / was still formatted with diskpart. I checked the file Explorer, and the two flash player 'A' and 'B' were not under 'computer '.
  Fortunately the files I really need to be backed up, are. So, I'm ok with that. Oh yes and I tried to put in flash players, and they were not recognized by the laptop.
  Couple questions:
  (1) Will Flash drive 'A' be affected in any way since it was "unplugged", while being formatted with diskpart?
  (2) my laptop isn't even a year yet, then how/why would my just closed USB ports?
  (3) is it possible that all 4 ports could just die at the same time random?
  (4) I really hope that's not it, but my motherboard could be beginning of failure?
  My laptop is an ACER Aspire V3 771 G, 1 TB HDD, NVIDIA GeForce GT730M, 8 GB of memory (4 dedicated for video) DDR3, Core i7 and running Windows 8 and I have had since about June of 2013. Main uses are for some school work dealing with CADD, game on PC via Steam, YouTube and Netflix occasional streaming movies via a 3rd party source that so far has given me problems such as viruses and bugs.
  I'm going to try to uninstall the USB controller drivers and reboot the laptop, unplug the power and take the battery method, simply by restarting the laptop WITHOUT uninstall the USB controller drivers. I'll try these stars and come back to say if either one of the fixes worked.
  * Real quick as question 1. USB key "A" literally just a finish is put in shape and when I entered the command 'assign', that the flash drive has been recognized once again, until I quit diskpart, now it is not yet recognized and even goes with my other, and my mouse (which the battery is NOT dead).

  Well, I would just put it out there, it was just a hiccup. I went to the stop of the laptop and he "fell on a problem" and instead start again, he drilled in reactivating the USB ports.  They all work very well. YAY! :)

• Satellite L40 - 18W - USB ports does not work after format HARD drive

  I formatted my laptop "L40 - 18w" after that all usb ports do not work.

  Could you please help me on this issue

  Thank you

  Ben is right. After the installation of the operating system as a first step, you need to install driver chipset.
  Please see the download page for Toshiba under http://eu.computers.toshiba-europe.com
  There you can find all the drivers for your model of laptop including driver chipset.

• Satellite A10 s203: USB ports does not work

  Hello! All of a sudden my usb ports do not work on my satellite sa10-s203. Tried everything (even restarted the ashes of l-top nothing happened.) Enybody can help me? Kris...

  Hello

  If the USB ports are properly recognized in device then as Quad Manager said it could be an external problem. The USB port is 500mA power. If the external device requires more power to work in this case, it of necessary to use the external power supply.

  Good bye

• Photosmart C4280 All In One: USB Port does not work

  When I try to scan, I get a message saying that the USB port is not installed. It is installed, but I bought a new USB port and still get the same message.

  Hi @MrsQ3,

  Thanks for getting back to me with this information.

  Have you already tried to install the software and drivers from hp.com printer? If you do not try to download the HP printer installation wizard for installation. This tool will find the most recent version of the printer software and drivers available for Windows 10.

  If you have already installed the printer software, try downloading and does not perform the HP print and Scan Doctor. This tool can diagnose and solve many problems of printing software and printer.

  Please let me know how it goes.

  Thank you.

• One of my usb ports does not work. A top forward on a MacPro 3.1

  So I plugged it in a charger to charge a battery. He went for about 1/2 hour then I got a message a lot of power, port and it will stop the port. Something like that. So now the port does not at all with any device. Can this be reset?

  Running OS 10.6.8 snow leopard. 3.1 MacPro Tower.

  Try a reset of the MSC...

  MacIntel: Reset of the controller (SMC) system management

• USB port does not work on Tecra M3

  I need assistance with my Tecra M3 USB issues.

  It has 2 USB ports. Awhile back, the USB ports refused to recognize USB keys without driver (I don't have any driver needed to try sticks).

  Recently I had to reinstall my modem ADSL from Siemens, etc. pilot that runs via a USB - connection to the LAN 2 then WAN miniport. And now a problem.

  1. the Modem LED told me that she has the power (it's a modem off - Siemens-C100-1)
  2. the link that LED holds for about 10 minutes (while I am online) then turns off (although the properties of connections tell me that they are always connected)
  3. other equipment - printer etc. which is powered through the OK USBs.
  4. the modem seems to work ok because I can use it with an iBook without problems.

  This would be a problem of USB driver? How will I know? If so how can I solve this problem?

  Thank you

  Hello

  Don t think that the malfunctioning of USP ports or are defective.
  It seems that another USB device works correctly. Or am I wrong?

  You can first try to remove all the USB ports on the Device Manager.
  Then restart the laptop and install the ports again! (By the way; after new reboot of the operating system automatically recognizes the USB ports)

  Disable the option on all ports of the USP of energy saving, then try to connect the USB again!

• Satellite C650 USB ports does not work

  Hello

  I have trouble with me laptop C650. USB ports yesterday do not work after you connect USB stick, SD card or some.
  Now I don't know if it's a hardware or software error.
  I tried to restore the system, change the USB drivers, perform the maintenance of PC and check the antivirus, but nothing did not work.

  Laptop computer ads?

  Thank´s for more info...

  Hello

  You can try to refresh the USB ports and the controllers that appear in Device Manager.
  Disconnect all USB devices and go to Device Manager.
  Here, expand USB area controllers.
  Now delete all USB host controllers and hubs root USB in the list.
  After this reboot of the laptop.
  Finally, the Windows operating system should start and should recognise all USB devices once again. Now connect a USB mouse and check if you can use it.

• Satellite M300 - left USB port does not work

  Hey,.

  I have a M300 Satellite, with a USB port on the right and the other on the left side. The one on the left has never worked with anything. Its never bothered me until now - I bought a portable HD and I need to connect it and a mouse at the same time...

  Interesting note though that when I put the laptop HD in the left USB port, the led lights, hard disk. The lappy himself made no sign he knows its there and I cannot access it, however...

  Any advice? Thank you very much!
  Dan

  Jin

  I guess, it is burning or something like that. You can buy a USB hub, it's a device that develops a single USB port into several so that there is more available ports to connect devices to a host system. It's not expensive and you connect many devices.

  Greers

• M40-265 - 2 of 3 USB ports does not work

  Hi all

  Since yesterday, I have my Toshiba Satellite M40-265.

  My problem is 2/3 ports USB does not work.
  I've tried different USB devices such as memory stick, mouse usb and usb printer plugin.
  Just plug the device into the left USB port, if they will be recognised by windows xp home.

  Any ideas what's wrong with my laptop?

  CU,

  GG

  Hi Gerold,

  It looks like a hardware problem with your USB port. Visually check the ports that do not work and you should see a central plastic ankle against which should be four strips of copper fitting. Make sure that none of the tapes is twisted or damaged, it is quite common for one or several of them have been accidentally bent out of position or ankle Central plastic must be broken.

  Kind regards

• Satellite 1800: USB Port does not allow the IPod to work

  Hello
  I have a portable Satellite 1800-314
  I bought a new IPod.
  When I connect it to the laptop, it does not work.
  There is a message that says: we need more speed into the USB port and it seems that the port is not the right one for the IPod.

  Do I have to update the Bios as well?

  I need a big help!

  Thank you

  Stef

  Hello

  As far as I know the Satellite 1800-314 uses USB version 1.1.
  It seems that your IPod needs a high performance USB (Version 2.0)
  Unfortunately, the BIOS update help doesn t. You can change t the USB 1.1 to USB 2.0.
  I think that the only way to connect the IPod is to use the PCMCIA card.

  Good bye