Installing the antenna Bluetooth T40

Similar Questions

• I can't install the drivers Bluetooth on the Satellite L755-16

  Hi guys

  Today, I have formatted my laptop Toshiba Satellite L755-169.
  I installed all the drivers, but when I want to install the Bluetooth driver it say RFBUS failed.
  What I do most

  Hello

  I think that you have not installed the driver Atheros BT filter.
  Satellite L755-169 is the Atheros WLan card which supports BT also supported.
  You must install the Atheros BT filter before installing the BT stack!

• I reinstalled Vista on a new hard drive and after installing the drivers Bluetooth, the icon will not be displayed in the control panel

  A few weeks ago my drive hard out crapped on me and I bought a new one. I installed Vista on it and thought that I installed all the drivers. Yesterday, I had to use my bluetooth and noticed that it has not been installed. After knowing that I need a patch for it, I was able to connect my phone to my computer. But now the icon is not in the control panel so that I could easily adjust settings or view paired devices. I can only adjust the settings of the icon in the bottom left of the taskbar. Whenever I try to view paired devices I get the icon of waiting and then nothing happens.

  Macuahuitl salvation,

  Ø what service pack is installed on your computer?

  If you don't have SP2 on your computer, you may not be able to see the icon in the control panel. Try to install SP2 on your computer and check the status.

  OR

  You can uninstall the device blue tooth from the Device Manager and restart the computer that will install the generic drivers, then check if the icon is listed in Control Panel.

  Please post back the result.

  Bindu S - Microsoft Support
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Laptop Samsung RC730 - impossible to find or install the device bluetooth - Windows 7 driver

  I used the blue tooth for centuries on this laptop and successfully transferred things to 2 different mobile phones.  Suddenly it does not work and the resolution of problems said the bluetooth device driver not installed.  I have the icon in my taskbar and have tried everything.  its driving me crazy - what because I installed the bluetooth Blue Sun cd?  I have uninstall.  Help, please!  When I look in the Device Manager it gives me the possibility to install it but could not find the missing driver of the laptop computer or internet

  Hello Fiona,

  Thanks for the reply for us.

  If you receive error device not found Bluetooth driver, you can try the steps of troubleshooting provided in the link below.

  Error: "device driver Bluetooth not found" when you try to connect to a bluetooth device

  If you want to send the screenshot we to the Microsoft Community Forum, please visit the link below.

  How to include a screenshot in your message

  Do we know if the provided troubleshooting steps helps.

• Impossible to install the Dell Bluetooth Windows 7 drivers

  Hello Sir,

  I use Dell Inspiron 15-3521.
  Currently I use Windows 7 Professional genuine.
  There is no driver installed for the wireless Bluetooth controller and.
  If no Bluetooth device in Device Manager.
  But when I try to install my wireless Bluetooth + network controllers drivers... It is displayed as "Setup cannot run on this platform. Please select package for your operating system'.

  That means... what help out me sir...

  Thank you!!!

  Hello

  This problem is limited to a specific file? You are able to install the other program successfully?

  This problem normally occurs when the device is not compatible with the current configuration of the system.

  I suggest you to download and install the latest Dell Web site chipset driver before you install the bluetooth driver / wireless.

  http://www.Dell.com/support/troubleshooting/us/en/19/product/Inspiron-15-3521?DGC=SM&CID=260354&lid=4787573

  If the problem is specific to the driver from Dell file, you can post the question in Dell support for further assistance forums.

  http://en.community.Dell.com/support-forums/laptop/f/3518.aspx

  Hope this information helps. Response with status so that we can help you.

• I have a problem with installing the driver bluetooth for Windows 8.

  Original title: cannot install the bluetooth driver

  I have Windows 8 Pro 64-bit (upgrade of Windows 7 Ultimate 64-bit).  I have problems with the bluetooth (Intel Centrino Advanced-N 6230) driver that will not be installed.  The

  error I get when using the driver (downloaded directly from Intel) Intel says "did not write the SupportDLL value in the \SYSTEM\CurrentControlSet\services\BTHPORT\Parameters key.

  \Radio support.  Check that you have sufficient access to that key or contact your support team. »

  Windows Update also displays several times this driver, but it fails to install as well.  If I remember correctly, the error is "access denied."  I contacted Microsoft earlier

  technology has taken control away from my computer and found the same problem.  It disabled all startup and restarted, but we do not have to reconnect after reboot, that's why I'm

  contact you again.  I'm guessing that something has gone wrong in the remake because precisely, I noticed it has disabled my facial recognition software, yet when he

  restarted, it took even my face.

  I am logged as administrator and I have also tried to right click on the .exe file and run as administrator, but it does not help.  I tried

  uninstall/reboot/reinstall with no luck.  I also tried several programs microsoft fix - it, but even once, no, I also tried to contact Intel by CAT and they

  were no help either.

  I tried also to navigate to this key in the registry editor, but I get an error message that says "error opening key.  Parameters cannot be opened.  An error is

  This key prevents open.  Details: access denied. »

  Finally, I'm frustrated and ran a repair of Windows 8 (could not restore because when I upgraded to Windows 8 Windows 7, somehow restorations have been disabled and I did not notice for about a month).  Then, I used the bluetooth driver directly from intel and everything works again.  I will say that when I ran the repair, he removed Windows Media Center (since it is therefore more part of the OS, but an add-on), but it's a very small price to pay for everything works correctly.

  Thanks for the help everyone!

• T440s cannot install the driver Bluetooth on Windows 8

  After you have uninstalled the previous version of the "Intel Proset/Wireless Software for Bluetooth", I use the Lenovo system update to download the latest driver and install it manually. But every time it shows the following figure:

  

  Please help me to fix it. BTW, I used the installer of microsoft own up to the audit of the previous version have been uninstalled completely. Thank you.

  Let me answer that question by myself. After you delete all the related items to "C:\Program Files (x 86) \Intel\Bluetooth" in the registry of windows, the installer for intel proset/weirelss can be treated successfully. Then, everything works fine now. I tried to understand this problem these days, and finally it is resolved. Wuala ~.

• to install the device bluetooth on Lenovo laptop

  Hello
  I have lenovo laptop and I want to install bluetooth device

  Hi, Gaurav,

  It would be useful that post you your laptop model

  Set up a Bluetooth compatible device

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Bluetooth Lenovo Thinkcentre kit...

  http://supportforlenovo.iyogi.com/ThinkCentre-A63/ThinkCentre-A63-Tower-Bluetooth.html

  Radio wireless Bluetooth switch removal & installation - ThinkPad T400s, T410s, T410si FPC

  http://support.Lenovo.com/en_US/product-and-parts/detail.page?&LegacyDocID=MIGR-72779

  Troubleshooting problems of Bluetooth - Value Line notebooks

  http://support.Lenovo.com/en_US/diagnose-and-fix/diagnose-by-symptom/detail.page?&LegacyDocID=MIGR-63100

  Troubleshooting Bluetooth issues - ThinkPad

  http://support.Lenovo.com/en_US/downloads/detail.page?docid=TS000529

  You should be able to locate the support manuals and documents here

  http://support.lenovo.com/en_US/default.page?

• I can't install the Bluetooth device on my PC HP 1315ee G6

  
  

  Hello:

  You must install the Broadcom bluetooth software and driver for the BCM207002A0 bluetooth radio.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-101140-1&CC=US&DLC=en&LC=en&os=4063&Product=5219106&sw_lang=

  The PCI device would be the following:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-100467-1&CC=US&DLC=en&LC=en&os=4063&Product=5219106&sw_lang=

• Impossible to install the BT driver

  For these last days, I was not able to use my Bluetooth and Wi - Fi. Then when I tried to install the driver Bluetooth on my Toshiba Satellite M645 - PSMPML-00UOO5 it displays the message "could not turn on Bluetooth monitor. Please turn the switch located on the side of the main unit wireless communication. "but I do not understand this.

  Where is the switch?

  According to posted the part number, you have an Asian model of laptop and it is unclear to me.
  Anyway, I guess the principle of its operation must be the same for all models Toshiba to activate the module WLAN or BT use the FN + F8 key combination.

  Please, check it out and post comments.

• Detection of blurtooth device when installing the battery

  When installing the Toshiba Bluetooth stack, when the program asks you to connect the bluetooth device, there is no detection of the device that I use (Belkin F8T017 Bluetooth dongle). Is this normal? A solution is to use such a dongle with the toshiba stack (which I need to use due to the HMD profile)?

  Thanks for help.

  Great! Thanks for your comments!

• Help for installing automated multiple bluetooth devices?

  Hello! I would like to describe our situation. I maintain computers for our local ambulance service.

  We have five ambulances. Everyone has a Logitech Bluetooth mouse and a Pentax PocketJet 3 Bluetooth printer.

  All the mice and printers are the same model.

  We have three from another manufacturer Toughbook CF-18 portable systems that use Toshiba Bluetooth stack.

  The books are transferred from an ambulance to the ambulance, ambulances are used that date.

  In addition, our policy is that portable computers use a local account with rights to base level 'user '. They cannot add their own bluetooth devices since they are not administrator or power users.

  Therefore, we must ensure that none of the three computers will work with any of 5 mice and 5 printers.

  I then have to wear each of the three books in each of the five ambulances and manually match each notebook with 5 mouse and 5 printers so that all laptops can be used in an ambulance.

  I don't like that I have to add each device, but I don't like that I have to do this manually on each of the 3 computers, and I bring the computer in a nearby physics eahc peripheral (or each device to the computer)

  This seems wrong! I have an inventory of the bluetooth address for each of our 5 mice and printers. You can a device add manually in a way, thanks to a script or command, so he don't need no need to be in physical proximity with the mouse or the keyboard and create a match?

  Ideally, I would like to do ith through a batch file, so I don't have to go through a repetitive cycle of point and click steps...

  Thank you!
  mtoal

  You cannot associate devices if they are not around, because the encryption key will be computed and stored on the host Bluetooth module and the module Bluetooth client (mouse and printer in your case).
  You can of course also configure your mouse in limited user mode if the HID drivers are pre-installed. I think that this is the case by default. Just try it. If this isn't the case, then just edit the file "As.ini" from the Bluetooth stack to pre-install the HID drivers. You can also set in 'Tosbtutl.ini' of the following before installing the battery Bluetooth.

  [AutoSave]
  HID = Enable

  It will start searching for devices (mouse, keyboards) HID when you start "Bluetooth settings".
  Assume that you have configured the same on your laptop, then on two laptop mouse.
  You must press the button of the mouse detection again and click on the mouse icon depending on BT-settings for the mouse work again on the one laptop computer. This is because most mice do not support multi-point connections. If it is supported then it is not necessary. However, it is not necessary to set up a second time.

  Bluetooth profiles are supported by your printer (SPP and HCRP)?

• Problem with the adapter Bluetooth Logitech speakers on Windows 8

  I use Windows 8 Pro, but I had the same problem on the consumer Preview (some things are different now though)

  I use a Dell Inspiron N5010 laptop with a Dell Bluetooth 365 module.

  When I first install the Adapter Bluetooth Logitech speaker it works fine (there is no driver for it but windows installs the driver of basic ad2p). The problem I have is that after the computer sleeps, stops, or restarts the unit is unplugged (as expected) and I can't reconnect (only to remove the device and install again).

  In Windows 8 Preview of consumption when the device is plugged in, I could separate and connect it to the sound settings, but it would vanish from the sound after a sleep settings, reboot or shutdown.

  I could easily connect or disconnect the device by double-clicking its icon in devices and printers in Windows 7. If I do the same thing in Windows 8, an error saying "BTWuiext has stopped working".

  So basically after every sleep, closing or restarting I remove and reinstall the device...

  I also tried troubleshooting of devices and printers, and I checked that Bluetooth Service is running.

  Any help is greatly appreciated! Thank you.

  Hi radufly,

  Thank you for writing to Microsoft Communities. From your problem description, I understand that, after every restart, sleep or a stop, you need to reinstall the drivers for your device. Please correct me if I misunderstood.

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  radufly, it seems that the device is not compatible with the Windows 8 environment. I recommend you to contact Logitech support http://www.logitech.com/en-us/support/support-contactus and check with them if they came with drivers for Windows 8.

• How to install the Bluetooth Module for Tecra S1

  Hello
  I have an old model S1 - PT831E-1DCEE-GR - and you want to install a Bluetooth (PA3121U-1BTM model?), but where should it be mounted?

  Kind regards

  Ulf

  Hello

  I think that on the Tecra S1 Bluetooth is optional.
  So on some laptops the BT has been installed on some not but I think that it should be possible to upgrade the unit with the BT module. (I hope ;))

  To my knowledge, the BT module must be installed in the place under the keyboard.
  But if you have no experience in these procedures you should t remove or install anything!

  The BT card must be placed above the keyboard area.
  To remove or to install the Bluetooth card, you must:
  1. remove the two white flat head screws.
  2 unplug the cable to antenna with the tweezers.
  3. disconnect the cards-SUMI (flat cables) on the system board.
  4 (remove the Bluetooth card) or (install the Bluetooth card)

  Be careful. But as I said above, usually it should be installed by a technician because the guys have more experience... you know

• How to install the Bluetooth firmware

  The communication between the software and the hardware blootooth is disturbed - I this before behhavior and it was corrected after an update to the bluetooth firmware (in a new version of OS X).

  So now I want to selectively reinstall the firmware of the internal bluetooth, as right now the message I get is: bluetooth is not available, and the bluetooth Control Panel is missing in system preferences.

  can someone give me a link?

  Kind regards

  Rob Tito

  What Mac model and what BT card is installed?

  What is the original install card BT?

  Have you tried reinstalling the BT card?

  Have you tried booting in safe mode?

  See if BT works OK on a new installation of Mac OS x? How to install OSX on another drive for testing purposes.