Installing the server ODI11g little Linux64

Similar Questions

• To install the server does not, after a Preparig to install the window hung for several minutes

  Hi, I tried to install memeo backup of a product for a moment, I recentley purchased. I know that the software and the product is not damaged, because I am able to install it on other computers. Its my fault see tho, I have the seagate FreeAgent GoFlex 1 TB external hard drive, and I had planned to use it on several computers. sort of, I installed it on my computer windows 7 without probs., but when I was installing on my windows vista computer, I accidentally unplugged the drive when installing memeo instant upward.  Needless to say, I knew this would be a problem. Windows popped up saying that the dashboard Seagate (which is the program that installs Memeo instant backup) have not installed properly, so I clicked on reinstall this program with the recommended settings, and I handed the drive and started the installation again. When I did, the registration page (for the unit I was using) pops up and froze, so I closed its process, then Setup of the Board of Directors of Seagate Dash appeared and I started to install, and when he rose to installation of the snapshot of Memeo back, it opens a "Preparing to install" window of a windows installer and after about 10-15 minutes , another windows installer window comes up saying ' to install the server does not.

  Ive done my time just trying to solve this problem and believe he made an incomplete registry file, it whenever it tries to install it tries to use the incomplete record. If one has found a solution to this, or knows what that means of ' installation server does not ", it would be very appreciated for your advice.    If you want to know my characteristics. they are {windows vista 32-bit home Basic, sp 2, 3 GB of ram, 2.10 ghz processor}

  Hello

  you are in the wrong forum

  It comes to the installation of vista operating system instance

  Why don't contact you the program manufacturer?

  Try the repair and recovery forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system?page=1&tab=all

• Fatal error when installing the Server Application Weblogic 11 g (10.3.4)

  Hello

  In the first attempt, I installed a Weblogic 10.3.4 server but when I was deploying an ear, server gets crashed (JDK was crushed) and after that, I was unable to start the server because it gave an error JDK.

  So I uninstalled existing Weblogic server and tried to install the server (same version using the same configuration) once more, but it does not. It asks me for the directory (WLS Home Directory), Complete/Custom and finally the installation, it is down a mistake (when 39% installation is complete) 'fatal error occurred during installation of the file and install it will cleanup now, out! " \Wlserver_10.3\common\bin\consol.exe C:\ < host directory > (access denied)".

  Can someone help me please to solve this error. Thanks in advance

  Kind regards

  Priya

  Hello

  The message that took place there is a permission problem. So could you please try the installation with administrator privileges.

  In case if the same mistakes persist could you try to install another directory C in a different way.

  Kind regards.

  Prakash.

• Cannot install the server pack 1 SQL server 2008 on Vista

  When I installed the pack Server SQL server 2008 1 on Vista machine, I got error code 84B 30001.

  Hello

  It comes to the installation of vista operating system instance

  Try the SQL server forums

  http://social.msdn.Microsoft.com/forums/en/category/SQLServer/

• Installed the server VCenter simple install, now what?

  I just finished installation install simple VCenter Server. I'm confused on what to do now. When I look in the VMWare folder in the start menu, I see VCenter client Orchestartor, but I don't know the connection. I'm reading on a device to VCenter Server but do not know if this is a separate installation or what. With respect to the VCenter Server for VSphere Client pluging, I am unable to install it. When I go to manag pluge-ins I installed plug-ins and plug-ins available, but nothing happens when I click on them. If I hit help that an error message appears that says "reference object not set to an instance of an object.

  Any help is appreciated. I suppose that here is my main questions.

  What is the next step after the Installation in VCenter Server?

  What is the main of the application to manage your VCenter Server?

  What is my plugin error?

  With simple installation, you have installed vCenter Single Sign On, the inventory Service and vCenter Server on the same host. Now, all you have to do is install the vSphere vSphere Client Web Client and make sure you can access the instance of vCenter server.

  Install the vSphere Client;

  http://pubs.VMware.com/vSphere-51/topic/com.VMware.vSphere.install.doc/GUID-1F4EB138-3301-4AC9-9B48-61166E0EBE24.html

  I recommend reading the post installation documentation, which contains all of this information;

  http://pubs.VMware.com/vSphere-51/topic/com.VMware.vSphere.install.doc/GUID-5C6223B4-3E9E-4DD1-82D2-DCC78DFD5C18.html

  Can you post a screenshot of the plugin error?

  See you soon,.

  Jon

• Install the server Vmware View connection

  Hello

  I have problem install vmware view connection server, my server has already joined ActiveDirectory, but I can't install vmware view connection to the server

  

  Help, please.

  Thank you

  Hudan

  It simply means that the client does not like your server certificate.  You should be able to click on configure SSL and change the certification autour options to make it work.

• You can install the server connection and security on the same virtual machine Server?

  I was looking around and found an old post that says that you could do.

  I tried the documentation view 5 but not a lot of luck there.

  If the deployment is small say 20 users view total.

  Could install you the connection and security on the same VM Server?   W2K8R2 64-bit?

  I certainly understand some of the security risks.

  TIA

  Marc Alumbaugh says:

  Any other ideas?

  No other ideas, but we have should stick to previous ideas and continue to work through them. You make progress in this analysis - continue! When it is correctly configured, you have configured the firewall/proxy etc don't not to block PCoIP and that you use at least seen 4.6 on the Client and the server, it does not work.

  It always seems that there's something blocking PCoIP in your environment - where the black screen.

  So when 'PCoIP external URL' on the login server is defined on InternalIP:4172, your View on the internal network Client connects fine. If you run Wiresahrk on your connection to the server to capture the connections, you will see a connection HTTPS turns on TCP 443. Then when you select a pool of offices you will see a PCoIP connection come in. It comes to 4172 TCP from the customer to the login server, then UDP 4172 also from the Client to the server connection as well as UDP 4172 in reverse. For this reverse part, the source UDP port will be 4172 and corresponds to the destination UDP port source on the incoming UDP packets. Check that this is the case. This will prove that the login server is gateway your PCoIP correctly.

  So far so good.

  Then, you switch to your remote Client to view from on the Internet. To do this, you assign the URL of the "external" ExternalIP:4172 PCoIP. Note that you don't need to restart the login server for this to take effect. It takes effect immediately. This IP address will be the public IP address which will probably through a NAT/firewall to access your connection to the server. You can start by checking that the IP address is correct using to connect to the server address when you satrt the customer to view. When you use the same IP address to the Client and through the authentication step, it will prove that it is set up correctly in terms of Routing/NAT etc. Then follow with Wireshark on the login server and observe what happens when you select a pool of virtual offices and get the black screen. You should see the same activity PCoIP on your login server model as in the case of internal test (i.e. starting with the incoming TCP connection on port 4172). View Client will use the ExternalIP address that you specified in the "URL external PCoIP ' to establish the PCoIP connection to connect to the server. So if you don't see this com 4172 TCP on the login server, or you do not see the packets UDP 4172 then something is blocking. This is usually caused by a firewall or a proxy blocking PCoIP.

  If this is the case and you do not see these packets to connect to the server, then run Wireshark on the Windows Client to view and see if you can see 4172 TCP and/or UDP sent to this ExternalIP 4172. If Yes, then you know that something (such as a firewall or proxy) between the Customer View and the view connection server it blocks.

  Let us know what it was.

  Hope it will be useful.

  Select this option.

• Installing the server on VMware server ESXi

  Hello

  Im trying to install esxi iso file in a VMware Server (in my laptop with 4 GB and windows 7 prof). I have created a virtual machine and tried to proceed with the installation. Initial measures follows and ends with Esc - repair-installation of the screen. In this screen im not control keystrokes at the keyboard and mouse n and cannot go any further. I found in the net that this method will work for purposes of practice. Can someone help me. ?

  Hello Pjo

  For your question, I understand what you are trying to install ESXi on your laptop to test / learning object. I also suppose that you try ESXi 4. ESXi 4 requires 64-bit processor. Your laptop should also support virtualization. To make sure that your laptop supports virtualization, go to configuration and find what is called VT and then activate it if it is not yet enabled.

  Once you have completed step abvoe, download & install the latest version of VMWare Workstation. Then create a new virtual machine, assign them to less than 2 GB of RAM, and then try again to install ESXi 4.

  I believe that this will help you to start with. If you have any other questions feel free to write back to me. And if you think that this answer is correct, please mark correct. If in case it is not correct, but has been useful so mark has useful

  Thank you very much

  Riaz

• Installing the Server VMware View Composer

  Hi team,

  Need help,

  I'm trying to install VMware View Composer server but I can not create my ODBC connector, can you pls help me to do this task.

  I get this error message

  

  (1) to connect to the database and the new query

  use 'ViewcomposerDbName '.

  exec Sp_changedbowner 'viewservice.

  (2) the right of the database and allow the sql and windows Authetication

  See the screenshot

  (3) lFailing Stil? Go to, click on Sql Server for management (on the left side) > Sql Server Logs > current view them if it connects

  It should be

• Problem installing the server identity OAM

  Hi all
  
  I install OAM 10.1.4.3 with the Directory of the user as OVD 11.1.1.2 and store data strategy as OID 11.1.1.2.
  While the Installation of the first step is Identity Server installation and we need to provide connection parameters to the directory of the user such as host name, port, uid and pwd admin so this identity server can update the schema for this.
  
  I chose directory as 'Data anywhere' store for OVD and given parameters and when I say then it starts updates and continues on this issue. I waited for an hour or so, but no luck. Also engaged with the new installation but once again stuck to the top at this point.
  
  OVD is up & running on port 8899. Experts to give pointers on this.
  
  Thank you
  Deepika

  You should try the OVD service port and not the admin port. It can be SSL or open mode. In my opinion, one of the following conditions is true:

  Either: ovd does not work

  Or: there are problems of firewall server to server ovd oam.

  To find out, do a telnet ovd_host ovd_port in the oam server box and see if the telnet returns.

• Install the server from the Publisher of BI on Windows Vista

  Hello
  
  Is that what someone did already installing BI Publisher Server on Windows Vista? It is not listed in the list of the supported platforms, but XP is not an and I installed it on XP.
  On Windows Vista, I can not installation began.
  
  Vista gives me the error: "Setup.exe" has stopped working.
  
  Im trying to install version: 10.1.3.3 (standalone)
  
  Thanks for your advice!
  
  Kris

  You received the error when and where? YES started? Anything in the install action log? You use the default path extended to reach setup.exe? If so, this path name is too long because "Desktop_Pulisher_whatever" inside strings, so to move the installation or change short folder names.

  In addition, section certification says also that not all combinations listed there has been put to the test or the other.

• Install the instant backup server Memeo does not

  to install the server does not

  Hi, I tried to install memeo instant backup, a program of a product I have recentley bought. I know that the software and the product is not damaged, because I am able to install it on other computers. Its my fault see however, I have a FreeAgent GoFlex 1 TB seagate external hard drive, and I had planned to use it on multiple computers. Sort of, I have it installed on my computer windows 7 any problem, but when I was installing on my windows vista computer, I accidentally unplugged the drive during the installation of the boad of seagate and memeo instant dashboard upward.  Needless to say, I knew this would be a problem. Windows popped up saying that the dashboard Seagate (which is the program that installs Memeo instant backup) have not installed properly, so I clicked on reinstall this program with the recommended settings, and I handed the drive and started the installation again. Setup of the Board of Directors of Dash Seagate stood and I started to install and when it came to installing the Memeo backup snapshot, a window is in the "Preparing to install" a windows installer, and after about 10 to 15 minutes, another windows installer window popped up saying "install the server does not" there is no error code or anything. She has just one option again or cancel

  Event log

  Event ID 1000 category (100)

  Failed application InstantBackup.exe, version 1.0.0.0, time stamp 0x4bd0e7f7, failed module KERNEL32.dll, version 6.0.6002.18005, time stamp 0x49e037dd, exception 0xe0434f4d code, fault offset 0x0003fbae, process id %9, application start time 0 x x 0% 10.

  Event ID 1002 category (101)

  The Memeo_Instant_Backup_Setup.exe version 4.60.0.7252 program ceased to interact with Windows and was closed. To see if there is more information about the problem, check the history of the problem in the reports on the problems and Solutions control panel. Process ID: fa0 Start Time: time of termination 01cc03e528d18f7e: 36

  You can uninstall the installation of backup by using programs and features? If this isn't the case, it can be it is an incomplete installation and does not let you uninstall it.

  You may need to use a 3rd party software removal tool to uninstall.
  Then reinstall the backup of the installation and see if the installation completed successfully.

  If this does not help, you can post your question on the forum of Memeo Instant Backup listed below:
  http://support.Memeo.com/ICS/support/default.asp?deptID=15014

  Thank you

  Marilyn

• Document required to install the mobility in WCS 11.1.1.8.0 Server

  Hi team,

  Can someone give me the link where I can download the document to install the server of mobility on the Web sites of the 11.1.1.8.0 Center... I tried, but not able to locate a correct document...

  Concerning

  Kiran purohit

  Hello Kiran,

  Here is the link:

  http://docs.Oracle.com/CD/E29542_01/doc.1111/e42077.PDF

  Best regards

  Pedro

• Cannot install the behavior extension for server and database for Dreamweaver CC 2014

  Hello

  I try to install the server behavior & extension of the database in my CC of Dreamweaver 2014 of the trial.  I've added it to https://creative.adobe.com/addons/patches/2176#.VGJ7TvnF-DA and it shows I have, but it has not yet appear in Dreamweaver.  I followed the steps outlined in the troubleshooting list:

  Internet works

  The application is compatible with the addon

  The application of CC desktop is installed and running

  Synchronization of files is enabled

  After that, I tried to install it through the Adobe Extension Manager.  As soon as I loaded up the Manager has crashed.  Whenever I open it crashes immediately.  Here is the error report:

  Signature of the problem:

  Problem event name: APPCRASH

  Name of the application: Adobe Extension Manager CC.exe

  Application version: 7.3.2.0

  Application timestamp: 5423f0ba

  Fault Module name: MSVCR100.dll

  Fault Module Version: 10.0.40219.325

  Timestamp of Module error: 4df2be1e

  Exception code: 40000015

  Exception offset: 0008d6fd

  OS version: 6.3.9600.2.0.0.256.4

  Locale ID: 1033

  Additional information 1: 9b2b

  More information 2: 9b2bdea32afaae877182c5486bcda189

  3 more information: f7dd

  Additional information 4: f7dd51dc76fb06d86332126480a431b7

  I then removed my addons, then deleted and reinstalled the extensions Manager.  As soon as I tried to open the Manager it still crashes.

  Any ideas?

  Running Windows 8.1

  Thank you

  -James

  Try the following.

  1. Uninstall the current extension.
  2. Install the DMXZone extensions Manager
  3. Using the extension Manager DMXZone, install the connections/data server behaviors panel

• possible to install the client tools OBIEE and OBIEE server in the same machine

  Hello
  
  possible to install the client tools OBIEE and OBIEE server in the same machine.
  
  Ex:
  
  Last week I've updated Patch BP1 in my local system, in the process, we got the update also oracle Client tool
  
  But in my Administration tool in the built-in tool automatically updated, we need to install the client tool in my system?
  
  My doubt:
  Please check this screenshot
  http://ScrnSht.com/sskbjb
  Please help me,
  
  Thank you

  You should not install client tools because they will be automatically installed w install the server. The 11g installation guide says "do not install client tools on the same computers that host your server instances Oracle Business Intelligence, client tools are already installed on these computers (as part of the installation of Oracle Business Intelligence)."

  so useful, mark it as good or useful.