Installing the server on VMware server ESXi

Similar Questions

• To install the server does not, after a Preparig to install the window hung for several minutes

  Hi, I tried to install memeo backup of a product for a moment, I recentley purchased. I know that the software and the product is not damaged, because I am able to install it on other computers. Its my fault see tho, I have the seagate FreeAgent GoFlex 1 TB external hard drive, and I had planned to use it on several computers. sort of, I installed it on my computer windows 7 without probs., but when I was installing on my windows vista computer, I accidentally unplugged the drive when installing memeo instant upward.  Needless to say, I knew this would be a problem. Windows popped up saying that the dashboard Seagate (which is the program that installs Memeo instant backup) have not installed properly, so I clicked on reinstall this program with the recommended settings, and I handed the drive and started the installation again. When I did, the registration page (for the unit I was using) pops up and froze, so I closed its process, then Setup of the Board of Directors of Seagate Dash appeared and I started to install, and when he rose to installation of the snapshot of Memeo back, it opens a "Preparing to install" window of a windows installer and after about 10-15 minutes , another windows installer window comes up saying ' to install the server does not.

  Ive done my time just trying to solve this problem and believe he made an incomplete registry file, it whenever it tries to install it tries to use the incomplete record. If one has found a solution to this, or knows what that means of ' installation server does not ", it would be very appreciated for your advice.    If you want to know my characteristics. they are {windows vista 32-bit home Basic, sp 2, 3 GB of ram, 2.10 ghz processor}

  Hello

  you are in the wrong forum

  It comes to the installation of vista operating system instance

  Why don't contact you the program manufacturer?

  Try the repair and recovery forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system?page=1&tab=all

• How to connect to the server ESXI vSphere Client side WAN?

  How to connect to the server ESXI vSphere Client side WAN?

  through firewall

  I tried to open the ports 902 903, 443... and so on...

  and I tried several sites to find the solution but...

  nothing works...

  connectivity works on local network

  Help, please...

  Source Destination Port

  ESXI 443/TCP client

  ESXi 902/TCP client

  ESXi 902/TCP Client

  ESXi 902/UDP Client

  ESXi 903/TCP client

  Edit: Also check if the firewall ESXi all IP addresses are allowed to connect:

  Example:

  See attachment...

• Fatal error when installing the Server Application Weblogic 11 g (10.3.4)

  Hello

  In the first attempt, I installed a Weblogic 10.3.4 server but when I was deploying an ear, server gets crashed (JDK was crushed) and after that, I was unable to start the server because it gave an error JDK.

  So I uninstalled existing Weblogic server and tried to install the server (same version using the same configuration) once more, but it does not. It asks me for the directory (WLS Home Directory), Complete/Custom and finally the installation, it is down a mistake (when 39% installation is complete) 'fatal error occurred during installation of the file and install it will cleanup now, out! " \Wlserver_10.3\common\bin\consol.exe C:\ < host directory > (access denied)".

  Can someone help me please to solve this error. Thanks in advance

  Kind regards

  Priya

  Hello

  The message that took place there is a permission problem. So could you please try the installation with administrator privileges.

  In case if the same mistakes persist could you try to install another directory C in a different way.

  Kind regards.

  Prakash.

• try to install the OS on vmware server

  I have vmware esxi 4.0 installed on a server and I have vsphere installed on a physical operation of the PC win xp pro.

  I have successfully connected to the machine vmware vSphere and I created a new virtual server... Well, started.

  I have the Server 2008 cd I want to install from, but I can't boot from the CD.

  I guess the server 2008 cd goes in the vmserver itself (not the xp machine I'm connected with vsphere).

  Yes, I have already started the virtual server and went into the bios and choose the cd rom as first boot device drive.

  Yes, the Server 2008 cd is a proper boot cd.

  what Miss me?

  Thank you.

  you have the box checked for the CD/DVD drive "connect at power on"?

• Install the server Vmware View connection

  Hello

  I have problem install vmware view connection server, my server has already joined ActiveDirectory, but I can't install vmware view connection to the server

  

  Help, please.

  Thank you

  Hudan

  It simply means that the client does not like your server certificate.  You should be able to click on configure SSL and change the certification autour options to make it work.

• Add a new table to the server ESXi 4.1

  Hello

  I try to add a new table on a server ESXi 4.1.0. Is it possible to build the table and add it without restarting the host? The server is an HP ML350 G5. I installed ESXi 4.1 on a hard drive, but I did not install HP driver packages. Is there something I could install from ESXi that would give me the features of configuration of the berries, etc. ?

  Thanks for any help,

  Stem

  Although it is possible (but unsupported) to install tools RIAD on ESXi (see VMware experience before: how to run the CLI of the ACU online HP for Linux in ESXi 4.x) you might have to restart the host still. Reading messages earlier, it would be also better to add the new table by using the ACU (Array Configuration Utility) rather than the ORCA (Option ROM Configuration for arrays). Of these posts, it looks like ORCA could possibly reorganize RAID sets, resulting in a non bootable host.

  André

• Connection to the server ESXi 5.5 browser?

  Hi guys,.

  How can I connect to my server from vSphere ESXi 5.5 via a browser.

  Should I still install install the web client full package to do this or there at - it another way?

  I just want to type a URL in my browser and see the UI that I have in the Web Client package.

  Thanks in advanced and sorry for asking this.

  Feurich

  as you understood the question... now kindly close this thread by scoring one of the suggestion above as useful...

• Installed the server VCenter simple install, now what?

  I just finished installation install simple VCenter Server. I'm confused on what to do now. When I look in the VMWare folder in the start menu, I see VCenter client Orchestartor, but I don't know the connection. I'm reading on a device to VCenter Server but do not know if this is a separate installation or what. With respect to the VCenter Server for VSphere Client pluging, I am unable to install it. When I go to manag pluge-ins I installed plug-ins and plug-ins available, but nothing happens when I click on them. If I hit help that an error message appears that says "reference object not set to an instance of an object.

  Any help is appreciated. I suppose that here is my main questions.

  What is the next step after the Installation in VCenter Server?

  What is the main of the application to manage your VCenter Server?

  What is my plugin error?

  With simple installation, you have installed vCenter Single Sign On, the inventory Service and vCenter Server on the same host. Now, all you have to do is install the vSphere vSphere Client Web Client and make sure you can access the instance of vCenter server.

  Install the vSphere Client;

  http://pubs.VMware.com/vSphere-51/topic/com.VMware.vSphere.install.doc/GUID-1F4EB138-3301-4AC9-9B48-61166E0EBE24.html

  I recommend reading the post installation documentation, which contains all of this information;

  http://pubs.VMware.com/vSphere-51/topic/com.VMware.vSphere.install.doc/GUID-5C6223B4-3E9E-4DD1-82D2-DCC78DFD5C18.html

  Can you post a screenshot of the plugin error?

  See you soon,.

  Jon

• Unable to connect to the server esxi vm via http

  I have installed esxi 3.5.0 update 3 on a hp dl380 g3 6 GB ram server. The installation was successful, and I set up an ip address and the root password.

  When I connect at this http://ipaddress/ , I get a request to enter the user name and password with the following in the window

  The server & lt; address ip & gt; level_15_access requires a user name and password.

  WARNING: This server is request your username and password sent precariously (basic without a secure connection).

  I enter the user name & lt; root & gt; and the password, but the guard window reappear. Finally, I get the following error: 401 Unauthorized

  Please can someone help?

  Thank you

  It would be vCenter Server.   The path above is actually on your install ESXi - if you enable SSH you could get to it.

• Cannot install the server pack 1 SQL server 2008 on Vista

  When I installed the pack Server SQL server 2008 1 on Vista machine, I got error code 84B 30001.

  Hello

  It comes to the installation of vista operating system instance

  Try the SQL server forums

  http://social.msdn.Microsoft.com/forums/en/category/SQLServer/

• You can install the server connection and security on the same virtual machine Server?

  I was looking around and found an old post that says that you could do.

  I tried the documentation view 5 but not a lot of luck there.

  If the deployment is small say 20 users view total.

  Could install you the connection and security on the same VM Server?   W2K8R2 64-bit?

  I certainly understand some of the security risks.

  TIA

  Marc Alumbaugh says:

  Any other ideas?

  No other ideas, but we have should stick to previous ideas and continue to work through them. You make progress in this analysis - continue! When it is correctly configured, you have configured the firewall/proxy etc don't not to block PCoIP and that you use at least seen 4.6 on the Client and the server, it does not work.

  It always seems that there's something blocking PCoIP in your environment - where the black screen.

  So when 'PCoIP external URL' on the login server is defined on InternalIP:4172, your View on the internal network Client connects fine. If you run Wiresahrk on your connection to the server to capture the connections, you will see a connection HTTPS turns on TCP 443. Then when you select a pool of offices you will see a PCoIP connection come in. It comes to 4172 TCP from the customer to the login server, then UDP 4172 also from the Client to the server connection as well as UDP 4172 in reverse. For this reverse part, the source UDP port will be 4172 and corresponds to the destination UDP port source on the incoming UDP packets. Check that this is the case. This will prove that the login server is gateway your PCoIP correctly.

  So far so good.

  Then, you switch to your remote Client to view from on the Internet. To do this, you assign the URL of the "external" ExternalIP:4172 PCoIP. Note that you don't need to restart the login server for this to take effect. It takes effect immediately. This IP address will be the public IP address which will probably through a NAT/firewall to access your connection to the server. You can start by checking that the IP address is correct using to connect to the server address when you satrt the customer to view. When you use the same IP address to the Client and through the authentication step, it will prove that it is set up correctly in terms of Routing/NAT etc. Then follow with Wireshark on the login server and observe what happens when you select a pool of virtual offices and get the black screen. You should see the same activity PCoIP on your login server model as in the case of internal test (i.e. starting with the incoming TCP connection on port 4172). View Client will use the ExternalIP address that you specified in the "URL external PCoIP ' to establish the PCoIP connection to connect to the server. So if you don't see this com 4172 TCP on the login server, or you do not see the packets UDP 4172 then something is blocking. This is usually caused by a firewall or a proxy blocking PCoIP.

  If this is the case and you do not see these packets to connect to the server, then run Wireshark on the Windows Client to view and see if you can see 4172 TCP and/or UDP sent to this ExternalIP 4172. If Yes, then you know that something (such as a firewall or proxy) between the Customer View and the view connection server it blocks.

  Let us know what it was.

  Hope it will be useful.

  Select this option.

• How to install the NIC to host runnign ESXi

  I had a HP DL380 ESXi, the server has 2 onboard NETWORK card, a recently whent down. We require that the server has at least 2 NIC

  I have a new NIC of Dlink gigabit which has the compatible drivers for Linx, I don't know how to install the hardware so that the ESXi can recognize it and use it

  Anny help would be appreciated.

  I know not at all compatible with ESXi Dlink network cards.  ESXi is not Linux - simply because the Linux drivers are available does not mean that you can use in ESXi.  You will need to check the VMware hardware compatibility list to see what supported chipsets, and you will need to know the chipset of this card.

  You can also view some websites ESX Whitebox to see if others have reported this card as working with ESXi.

• How to install the third-party driver on ESXI installation time?

  Hello world

  I want to install the network on the server appearing, HP driver while the Installtion ESXI5.0 time, how to install the driver on installation of ESXI5.0 third-prty?

  As windows, press F6 to install the driver on the installation. Please share your answers sound really update my knowledge.

  Thank you

  Mikael

  You can also check this Installation ESXi5 on an HP G8

• Can not install the file OVA ' VMware-vcops - 5.0.1.0 - 677931 - vapp.ova.

  (message in french below)

  I want to try the software "VMware-vcops - 5.0.1.0 - 677931 - vapp.ova" but unfortunately when deploying vSphere file, you select a host in the cluster, it is an error message: "OVF package file cannot be deployed because it is not valid" (free french translation). As I have no other explanation, what can I do? I checked that the MD5sum download from vmware.com website.

  Thank you!

  Hello, I would like to install the trial "VMware-vcops - 5.0.1.0 - 677931 - vapp.ova ' in my infra esx, but unfortunately the deployment for vSphere, after selection of a host in the cluster screen to, an error" OVF package can be deployed car it is invalid "appears, without further explanation. What do I do? I checked the checksum MD5 of the file downloaded from vmware.com

  Thank you!

  Hello

  Make sure that you are not in any of the conditions below:

  (1) installation directly to ESX (e.g. without using a VC) is not supported.

  (2) for installation within a cluster, you need to enable DRS on the cluster

  Thank you!