Installs have a different interface? 2015.0.0-> 2015.1.2?

Similar Questions

• How can I change the installation of the different CC 2015 Apps folder? The standard location is Program Files.

  The standard location is Program Files. However, I don't want to install them on my SSD-windows disk (where Program Files is located), but on another HARD drive. Thanks in advance!

  Uninstall everything that you want to move > open your cc desktop application > click the gear on the top icon right > click Preferences > creative cloud > installation location > reinstall.

• Order of 100 Mbps with the same policy map on different interfaces of service-policy in routers

  We have several different interfaces in our routers. On that note, we have service-air to limit the bandwidth of 100 Mbps.

  If we use a sheet of class corresponding to a list of access as "permit ip any any".

  and map political with the class-map to the police up to 100 Mbit/s.

  If we apply this policy plan in the form of service-policy interface. All interfaces that use this service policy would share 100 Mbps or will they get 100 Mbps each?

  Thanks for any response.

  Concerning

  Henrik

  Hello

  As you apply the policy by interface, each interface will get 100 MB

  HTH

• Problem with Windows Mail - "you have a different flavor of Windows Mail installed. Installation cannot be completed. »

  My OS is Windows Vista. Whenever I get an update for Windows mail, going through the installation process it stops and gives me a message, "you have a different flavor of Windows Mail installed. Installation cannot be completed. "Should I uninstall Windows Mail and re - install (if so, how?) or do something else?

  Which tells you that this error is that you already have an improved version, but you can use uninstall a program from your control panel or by cheque in programs and features.

  I think that you will search the windows live essentials 2011.

  You may still need to change the way you receive updates recommended by microsoft,

  They install allocate optional updates of windows in this setting.

  But at this point, I'm not sure if your use of webmail or live messaging software essentials 2011 updated?

  You indicate that you want to upgrade? TO?

  One thing you should know Messenger sees some problems so the upgrade is not a good idea right now, and if you are using ie 9 it's really going to be more trouble that it's worth.

• Different networks on different Interfaces

  I suspect that the answer to this question is no, but it is possible to simultaneously run different routes on different interfaces via El Capitan?

  Here's my situation: I have a lot of work from home and rely on an endpoint of Cisco 871 VPN to drive my VoIP as workphone and connect my MBP to of the corporate network through the Thunderbolt Display.  At the same time, I have a NAS and a printer on my LAN, I connect to WiFi, I need to access.  Sure enough I could work this point in Linux, but my attempts on OS X, er, macOS were not successful with lots of horror.  The Cisco assigns a router by default for Ethernet display configuration, which I think is the culprit...

  Those about to give me lectures on corporate network security, I am aware, it defeats the purpose to isolate my end point of my network, but our network of offices is almost entirely jobs I need VNC/RDP to and I have permission assuming that I can make it work.

  Thank you very much

  MB

  Glance at the 'route' command from an Applications-> utilities-> Terminal Services session.

  You will have to Google to find examples of what you want to do.

  NOTE: I'm assuming that you are NOT any VPN software running on your Mac, and Cisco 871 is material external connects to work.  I mention this because usually a VPN on Mac software includes all of the network stack.  External VPN equipment would leave your single network interfaces to specify the different routes for your distinct interfaces.

• Windows Live Essentials does not update because I ' have construction different flavor '-help.

  I am actually having a problem with my microphone, reading distorts my voice with a kind of chipmunk...

  So I'm trying to update Windows, but it won't let me install Windows Live Update because:

  "You already have building different flavor of Windows Live.

  What can I do to fix this?  And both of those are even related...

  Thank you

  You can find support for the installation/upgrade to Windows Live Essentials 2011 in this forum: http://windowslivehelp.com/forums.aspx?forumid=a372972e-8e7a-4d85-adc3-a1b43e8c02ec

  See also: http://windowslivehelp.com/searchresults.aspx?query=build%20flavor&productid=12

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Messenger does not update and continues to fall. Have tried different things according to research on the web without success. Very frustrated!

  Messenger does not update and continues to fall. Have tried different things according to research on the web without success. Deleted Outlook connector, nothing helps.  Any ideas? OS is XP SP3.  Very frustrated!

  The message "network error has occurred. trying to read the file"C:\windows\installer\messenger.msi"

  Have removed Outlook connector, nothing helps.  Ran "msicuu2.exe" nothing helps.  Off Zone Alarm - No difference.

  All other programs except the AntiVirus closed during installation.  Would appreciate any help please.

  Hi a_wiseowl,
   
   
  It has a similar post here as well. Check if the advice given in the post will help you.
   
  Update MSN Messenger to Windows Live Messenger 2011, code error 80070643.
   
  If it does not help, post your query in Windows Live Messenger Forums for assistance on this issue.
   

  Kind regards

  Divya R - Microsoft technical support.

• tried to install essentials windows 2011 - after you download it, he can't settle down and I get message "you already have building different flavor of windows live. How can I fix it

  tried to install windows essentials 2011 - after you download it, it does not get installed to complete and I get the error message "failure, you already have building different flavor of windows live" Ox80280008

  You can find support for the installation/uninstall/upgrade Windows Live Essentials in this forum: http://answers.microsoft.com/en-us/windowslive/forum/wlinstall

  PS: Windows Live Essentials, not Windows Update, was to invite you to upgrade to Windows Live Essentials 2011 QFE3 - who made a compulsory since mid-June 2012 update. If Windows Live Messenger, etc., does not work, that's why.

• "Move" failover to different / interface port

  Sorry if this is in the wrong place, we had if rarely to issues which were not covered otherwise I frequent this area.

  How is it difficult to change the interface used for active failover / standby? This is a pair of work, already configured with standby, but I need to move the cable crossed and tell them to use a different interface.
  Pair of ASA 5510, already put in place and work with failover, which was originally set on Ethernet port 0/3 by senior network administrator. It seems that its use of interfaces or ports he used things straight out of the examples on the web, including the interfaces used.
  The admin network senior retired last spring and left me "supported", gee, thanks.
  I need to make some changes and Ethernet port need for an important new project.
  The management interface 0/0 is unused and shut down. We manage by inside the interface from a specific inside subnet so do not need the interface dedicated management.
  I want to spend the shift IN management TO Ethernet 0/3 0/0

  * This is the current configuration:

  Output of the command: "sh run failover.

  failover
  primary failover lan unit
  failover failover lan interface Ethernet0/3
  failover failover Ethernet0/3 link
  failover interface ip failover 169.254.255.1 255.255.255.252 ensures 169.254.255.2

  * And it's the current 0/3 interface and management configuration:

  interface Ethernet0/3
  STATE/LAN failover Interface Description
  !
  interface Management0/0
  Speed 100
  full duplex
  Shutdown
  nameif management
  security-level 0
  no ip address
  OSPF cost 10

  I know that it can work on the management interface 0/0 because I see a lot of 'how to configure' as if the SAA is brand-new and several examples there indeed be setup on the management.

  I'm looking to find out how to take a pair of ASA is currently configured and has a functional work and all failover configuration simply "tilting move" to a different hole, or change the interfaces used for the 'heartbeat' somehow.

  I guess that's not difficult - but I also assume that there is a specific sequence of events that must occur in order to prevent the pair to enter the failover and switching of the main roles...
  For example - would have turned off or turn off the power switch and if so, how and on what ASA (frankly, I don't know how to access education secondary or standby if it needs to be done, suspended or on the rescue unit, because I never did that 'deep' a before config)
  CLI is very well - I'd be too comfortable in ASDM or cli.

  I really hope this makes sense - I have more than one convenience store and fixer than a designer or network engineer...
  And thank you very much - get this moved will release the interface I need and can really make a big bump in my list of project while the project manager is on vacation this week! I'd love to have done this and before his return.

  Oh, in case it is important as I said, it's running license and version shown here:

  Cisco Adaptive Security Appliance Software Version 4,0000 1
  Version 6.4 Device Manager (7)

  Updated Friday, June 14, 12 and 11:20 by manufacturers
  System image file is "disk0: / asa844-1 - k8.bin.
  The configuration file to the startup was "startup-config '.

  VRDSMFW1 141 days 4 hours
  failover cluster upwards of 141 days 4 hours

  Material: ASA5510, 1024 MB RAM, Pentium 4 Celeron 1600 MHz processor
  Internal ATA Compact Flash, 256 MB
  BIOS Flash M50FW080 @ 0xfff00000, 1024 KB

  Hardware encryption device: edge Cisco ASA - 55 x 0 Accelerator (revision 0 x 0)
  Start firmware: CN1000-MC-BOOT - 2.00
  SSL/IKE firmware: CNLite-MC-Smls-PLUS - 2.03
  Microcode IPSec:-CNlite-MC-IPSECm-HAND - 2.06
  Number of Accelerators: 1

  0: Ext: Ethernet0/0: the address is 0024.972b.e020, irq 9
  1: Ext: Ethernet0/1: the address is 0024.972b.e021, irq 9
  2: Ext: Ethernet0/2: the address is 0024.972b.e022, irq 9
  3: Ext: Ethernet0/3: the address is 0024.972b.e023, irq 9
  4: Ext: Management0/0: the address is 0024.972b.e01f, irq 11
  5: Int: not used: irq 11
  6: Int: not used: irq 5

  The devices allowed for this platform:
  The maximum physical Interfaces: unlimited perpetual
  VLAN maximum: 100 perpetual
  Guests of the Interior: perpetual unlimited
  Failover: Active/active perpetual
  VPN - A: enabled perpetual
  VPN-3DES-AES: activated perpetual
  Security contexts: 2 perpetual
  GTP/GPRS: Disabled perpetual
  AnyConnect Premium peers: 2 perpetual
  AnyConnect Essentials: 250 perpetual
  Counterparts in other VPNS: 250 perpetual
  Total VPN counterparts: 250 perpetual
  Shared license: disabled perpetual
  AnyConnect for Mobile: disabled perpetual
  AnyConnect Cisco VPN phone: disabled perpetual
  Assessment of Advanced endpoint: disabled perpetual
  Proxy UC phone sessions: 2 perpetual
  Proxy total UC sessions: 2 perpetual
  Botnet traffic filter: disabled perpetual
  Intercompany Media Engine: Disabled perpetual

  This platform includes an ASA 5510 Security Plus license.

  Cluster failover with license features of this platform:
  The maximum physical Interfaces: unlimited perpetual
  VLAN maximum: 100 perpetual
  Guests of the Interior: perpetual unlimited
  Failover: Active/active perpetual
  VPN - A: enabled perpetual
  VPN-3DES-AES: activated perpetual
  Security contexts: 4 perpetual
  GTP/GPRS: Disabled perpetual
  AnyConnect Premium peer: 4 perpetual
  AnyConnect Essentials: 250 perpetual
  Counterparts in other VPNS: 250 perpetual
  Total VPN counterparts: 250 perpetual
  Shared license: disabled perpetual
  AnyConnect for Mobile: disabled perpetual
  AnyConnect Cisco VPN phone: disabled perpetual
  Assessment of Advanced endpoint: disabled perpetual
  Proxy UC phone sessions: 4 perpetual
  Proxy total UC sessions: 4 perpetual
  Botnet traffic filter: disabled perpetual
  Intercompany Media Engine: Disabled perpetual

  This platform includes an ASA 5510 Security Plus license.

  Serial number: ABC12345678
  Running permanent activation key: eieioandapartridgeinapeartree
  Registry configuration is 0x1
  Last modified by me to 15:03:07.132 CDT MON Sep 15 2014 configuration

  Disconnect an interface monitored on your rescue unit that will ensure that it does not take as active. Then cut the failover link and modify its failover parameters. (You will need to first remove the nameif for M0/0).

  Then, make the changes on the primary unit similar free game active. Reconnect the failover link, confirm the synchronization of the units and finally reconnect the interface of production on the rescue unit.

• ASA 5510 VPN multiple tunnels through different interfaces

  Is it possible to create VPN tunnels on more than one interface to an ASA (specifically 5510 with 8.4), or I'm doing the impossible?

  We have 2 public interfaces on our ASA connected to 2 different suppliers.

  We must work L2L tunnels of the SAA for remote offices through the interface that is our ISP 'primary' and also used as our default gateway for internet traffic.

  We are trying to install a remote office use our secondary connection for its tunnel (office of high traffic we would prefer separate away from the rest of our internet and VPN traffic).

  I can create the tunnel with the ACL appropriate for traffic tunnel, card crypto, etc., put in place a static route to force ASA to use the secondary interface for traffic destined for the public of the remote gateway IP address, and when I finished, traffic initiated by the remote site will cause the tunnel to negotiate and find - I can see the tunnel in Show crypto ikev1 his as L2L answering machine MM_ACTIVE , Show ipsec his with the right destination and correct traffic local or remote identities for interesting, but the ASA local never tries to send traffic through the tunnel.  If I use tracers of package, it never shows a VPN that is involved in the trafficking of the headquarters in the remote desktop, as if the SAA is not seeing this as for the corresponding VPN tunnel traffic.

  If I take the exact same access and crypo card statements list and change them to use the primary ISP connection (and, of course, change the remote desktop IP connects to), then the connection works as expected.

  What Miss me?

  Here is a sample of the VPN configuration: (PUBLIC_B is our second ISP link, 192.168.0.0/23 is MainOffice 192.168.3.0/24 is FieldOffice)

  permit access list range 192.168.0.0 PUBLIC_B_map 255.255.254.0 192.168.3.0 255.255.255.0

  NAT (Inside, PUBLIC_B) static source MainOffice MainOffice static FieldOffice FieldOffice

  card crypto PUBLIC_B_map 10 corresponds to the address PUBLIC_B_map

  card crypto PUBLIC_B_map 10 set counterpart x.x.x.x

  card crypto PUBLIC_B_map 10 set transform-set ESP-3DES-SHA ikev1

  PUBLIC_B_map PUBLIC_B crypto map interface

  tunnel-group x.x.x.x type ipsec-l2l

  tunnel-group ipsec-attributes x.x.x.x

  IKEv1 pre-shared-key *.

  Route PUBLIC_B x.x.x.32 255.255.255.224 y.y.y.y 1

  If I take this same exact configuration and change it to use PUBLIC (our primary connection) instead of PUBLIC_B, remove the instruction PUBLIC_B route and change the desktop to point to the ip address of the PUBLIC, then everything works, so my access list and crypto map statements must be correct.

  What I don't understand is why the ASA Head Office does not seem to recognize interesting for the tunnel traffic when the tunnel is for the second ISP connection, but works when it is intended for the main ISP.  There is no problem of connectivity with the ISP Internet B - as mentioned previously, the tunnel will come and negotiate properly when traffic is started from the desktop, but the traffic of main office is never sent to the bottom of the tunnel - it's as if the ASA does not think that traffic of 192.168.0.x to 192.168.3.x should pass through the VPN.

  Any ideas?

  Hello

  I think your problem is that there is no route for the actual remote network behind the VPN L2L through ISP B connection

  You could try adding add the following configuration

  card crypto PUBLIC_B_map 10 the value reverse-road

  This should automatically add a static route for all remote networks that are configured in the ACL Crypto, through the interface/link-ISP B.

  If this does not work, you can try to manually add a static route to the ISP B link/interface for all remote networks VPN L2L in question, and then try again.

  The route to the remote VPN peer through the ISP B does not to my knowledge.

  I would like to know if it works for you.

  It may be useful

  -Jouni

• Q1: Can we have 2 different products Middleware (SOA and forms and reports) in the same field of WLS?

  Q1: Can we have 2 different products Middleware (SOA Suite and forms and reports) both executed in the same Weblogic domain?

  Q2: what about 2 domains different (one for SOA Suite) and one for forms and reports on the same machine (Box) on the same installation of Weblogic?

  I'm looking for official documents that can clarify these issues for the customer.
  Thank you.

  Hello

  Q1: Can we have 2 different products Middleware (SOA Suite and forms & States) both executed in the same Weblogic domain?

  It is not supported because as SOA and forms & States share a common directory called oracle_common that would be

  crushed by the product. This is why we ask you to use two different homes of Middleware for installation and configuration.

  Ex: If you have installed SOA in a field and you have installed forms & reports and then the oracle_common could be crushed by

  Binary forms & reports and so there might be problem with SOA.

  Q2: how about you 2 different (one for SOA Suite) areas and the other for forms & reports on the same machine (Box) on the same installation of Weblogic?

  You can have 2 different domains but not in the same weblogic Installation according to the explanation above.

  Kind regards

  Prakash.

• I'm on a mac. I have 2 different versions of mac operating systems running on 2 different hard disks, because of needs of customers with software compatibility. If I update a cc adobe programs in a single operating system hard drive system, it will affect

  I'm on a mac. I have 2 different versions of mac operating systems running on 2 different hard disks, because of needs of customers with software compatibility. If I update a cc adobe programs in a single operating system hard drive system, it will affect older versions of programs cc in the other system of operating system hard drive?

  If, as you say, they are completely separate installations on separate hard disks, each with there own version of PS for example, there should be no way that they could interfere with each other! I assume you are using a form any of Boot Manager to load a specific version of Mac OS x?

  I did something similar at the start in a similar situation with client compatibility and not had a problem with either interfere with others!

  However, you share the programs somehow between different OS, so that would be another matter.

• I already have photoshop own cc 2015, but he said be to re - install... I'll still have to buy it? How can I fix it?

  I already have photoshop own cc 2015, but he said be to re - install... I'll still have to buy it? How can I fix it?

  heatherg57152348 wrote:

  I already have photoshop own cc 2015, but he said be to re - install... I'll still have to buy it? How can I fix it?

  You have not only done 2015 CC adobe.  You subscribe to the creative cloud that allows you to activate the Photoshop installation on two machines.  You should be able to re - install Photoshop on your machine turned on. If you can not try using Adobe cleaner. Use of the Adobe Creative Cloud cleaning tool to solve installation problems

• Help! For an assignment, I need to use InDesign 2014 to make a digital item. I have the CC with 2015. How can I get the version of 2014 for my Mac

  Help! For an assignment, I need to use InDesign 2014 to make a digital item. I have the CC with 2015. How can I get the version of 2014 for my Mac

  Sorry, I can not explain this. It is not sensible.

  Try going to your cloud creative desktop App. Click on the "gear" icon > Preferences > General. Sign out and then sign in using your Adobe ID and see if it looks different.

• I did turn muse on my computer OK until I updated since Adobe Muse CC2014 to Adobe Muse CC2015 through Cloud applications. I have now Muse.exe 2015 icon on my desktop but when I double click to execute a message tells me that "the program cannot.

  I did turn muse on my computer OK until I updated since Adobe Muse CC2014 to Adobe Muse CC2015 through Cloud applications.

  I have now Muse.exe 2015 icon on my desktop but when I double click to execute a message tells me that "the program can't start because boost_system.dll is missing on your computer. Try reinstalling the program to fix the problem.

  Muse program is not in the lower part of the window for applications over to reinstall and at the top of the window of apps that I downloaded two programs, Photoshop & Muse. He told me that Muse is up-to-date.

  I need to know if the boost_system.dll file is part of the Muse or it is part of my Windows 7 platform. If it is part of the Muse

  How can I reinstall the if it is not in the window apps.

  See you soon

  Run the cleanup tool and try again:

  The Adobe Creative Cloud Cleaner tool allows to solve installation problems

  Mylenium