Installtion problem.

Similar Questions

• installtion problem multiple application.

  Hi, I'm using labview 8.5.1 and I made two different labview based application. When I try to install both applications on a PC, another application removes previously installed application. so I'm not able to install applications on a PC.

  even the name of the installer, installation path, the application name, the name of the product are different in both applications.

  Copy the build script should create a new GUID in LV 8.5.1. So I guess it was the same script to create the installer and changed after the creation of the first...

  hope this helps,

  Norbert

• Direct Mail installtion problems

  Hi, I installed windows live essentials on my laptop wife.s, everything seems to work properly with the exception of direct mail, when I try to open a box to come up with the following, C:\Program Files\Windows Live\Mail\wlmail.exe and the message... The application has failed to start because its side by side configuration is incorrect. check the log of events applications for more details.

  The Vista Home Basic installed on the Acer has always seemed very well, but it will not access windows live mail.

  Post Windows Live questions in the appropriate forum found here:
  http://windowslivehelp.com/

• apex installtion problem

  Hi all
  
  I have oracle 11g express edition
  Windows xp
  Oracle express 4.2.1 application
  After reading the installation instructions,
  I connect as sysdba SQL.
  and try to issue the following command

  SQL> conn sys as sysdba
  Enter password:
  Connected.
  SQL> @E:\APEX\apex_4.2.1_en\apex\appins.sql users users temp /i/

  but it gives the following message

  define "^" (hex 5e)
  Enter value for prefix:

  How to fix?
  
  Kind regards.

  >

  SQL > @E:\APEX\apex_4.2.1_en\apex\appins.sql users temp is

  You call the wrong script, you must call apexins.sql

• Problem during installtion VSA 5.1.3 (Brownfields)

  
  Hello community,

  During installtion (new) VSA Setup stopped after a few seconds with the following error (Configuration with no VLAN used - but mistake happens also with configured VLAN ID on the back-end and Fornt-end & front-end environments):

  Configuration, such as the ASB 'Best practice' paper with 4 NICs.

  Could not create the cluster VSA: VMotion IP is currently defined as 192.168.101.2, which does not have an IP address that you specified. Please check these game and try again.

  VSAManager.log:

  VSA network settings management
  IP, netmask Gateway/Interface address
  Cluster: 172.16.0.94 255.255.0.0 172.16.1.55
  VSAManager Service: 172.16.0.41 255.255.0.0 Local 2 network connection

  
  VSA VM Network Settings: host 17
  IP address mask subnet gateway Vlan ID
  Management: 172.16.0.96 255.255.0.0 172.16.1.55 0
  NFS: 172.16.0.97 255.255.0.0 172.16.1.55 0
  Backend: 192.168.101.2 255.255.255.0 - 0
  Function: 172.16.0.86 255.255.0.0 172.16.1.55 0

  VSA VM Network Settings: host-9
  IP address mask subnet gateway Vlan ID
  Management: 172.16.0.89 255.255.0.0 172.16.1.55 0
  NFS: 172.16.0.90 255.255.0.0 172.16.1.55 0
  Backend: 192.168.101.1 255.255.255.0 - 0
  Function: 172.16.0.85 255.255.0.0 172.16.1.55 0

  Location of the OVF: file:///C:/Program Files/VMware/Infrastructure/tomcat/webapps/VSAManager/ovf/sva_OVF10.ovf
  Eager to zero: false

  2013-06-03 11:19:53, 71 569 [DefaultTaskRunner] [pool-57-thread-1] INFO - the task finished with result: true. TaskID:LogParams
  2013-06-03 11:19:53, 569 73 [DefaultTaskRunner] [pool-57-thread-1] INFO - inform listeners to end task. TaskID:LogParams
  2013-06-03 11:19:53, 569 49 [DefaultTaskRunner] [pool-57-thread-1] INFO - start task notifying listeners. TaskID:ClusterExists
  2013-06-03 11:19:53, 69 570 [DefaultTaskRunner] [pool-57-thread-1] INFO - start of the execution of the task. TaskID:ClusterExists
  2013-06-03 11:19:53, 583 433 [SessionService] [pool-57-thread-1] INFO - Cluster create DC current: datacenter-2
  2013-06-03 11:19:53, 71 583 [DefaultTaskRunner] [pool-57-thread-1] INFO - the task finished with result: true. TaskID:ClusterExists
  2013-06-03 11:19:53, 73 583 [DefaultTaskRunner] [pool-57-thread-1] INFO - inform listeners to end task. TaskID:ClusterExists
  2013-06-03 11:19:53, 49 583 [DefaultTaskRunner] [pool-57-thread-1] INFO - start task notifying listeners. TaskID:AuditHostGroup
  2013-06-03 11:19:53, 584 69 [DefaultTaskRunner] [pool-57-thread-1] INFO - start of the execution of the task. TaskID:AuditHostGroup
  2013-06-03 11:19:56, 823 235 [Utils] [pool-57-thread-1] INFO - recover dev.property: evc.config = true
  2013-06-03 11:19:56, 823 235 [Utils] [pool-57-thread-1] INFO - recover dev.property: evc.config.baseline = lowest
  2013-06-03 11:19:56, 71 837 [DefaultTaskRunner] [pool-57-thread-1] INFO - the task finished with result: true. TaskID:AuditHostGroup
  2013-06-03 11:19:56, 837 73 [DefaultTaskRunner] [pool-57-thread-1] INFO - inform listeners to end task. TaskID:AuditHostGroup
  2013-06-03 11:19:56, 837 49 [DefaultTaskRunner] [pool-57-thread-1] INFO - start task notifying listeners. TaskID:NetworkConfigValidation
  2013-06-03 11:19:56, 69 838 [DefaultTaskRunner] [pool-57-thread-1] INFO - start of the execution of the task. TaskID:NetworkConfigValidation
  2013-06-03 11:19:57, 131 89 [DefaultTaskRunner] [pool-57-thread-1] INFO - inform listeners to exception of the task. TaskID:NetworkConfigValidation
  2013-06-03 11:19:57, 80 132 [DefaultJobRunner] [pool-57-thread-1] ERROR - caught Exception. From rollback for the job if cancellation is supported. JobName:ClusterCreation - data center-2
  SvaManagerException: VMotion IP is currently defined as 192.168.101.2, which does not have an IP address that you specified. Please check these game and try again.
  at com.vmware.sva.manager.utils.VCUtils.ensureVMotionIPsAreCorrectOnAllHosts (VCUtils.java:2183)
  at com.vmware.sva.manager.utils.NetworkConfigValidator.validateIps (NetworkConfigValidator.java:156)
  at com.vmware.sva.manager.utils.NetworkConfigValidator.validateNetworkConfiguration (NetworkConfigValidator.java:117)
  at com.vmware.sva.manager.utils.NetworkConfigValidator.validateNetworkConfiguration (NetworkConfigValidator.java:61)
  at com.vmware.sva.manager.jobservices.tasks.TaskNetworkConfigValidation.execute (TaskNetworkConfigValidation.java:33)
  at com.vmware.sva.manager.jobservices.impl.DefaultTaskRunner.handleTaskStart (DefaultTaskRunner.java:70)
  at com.vmware.sva.manager.jobservices.impl.DefaultTaskRunner.call (DefaultTaskRunner.java:33)
  at com.vmware.sva.manager.jobservices.impl.SyncTaskGroup.execute (SyncTaskGroup.java:46)
  at com.vmware.sva.manager.jobservices.impl.DefaultJobRunner.run (DefaultJobRunner.java:60)
  to java.util.concurrent.Executors$ RunnableAdapter.call (unknown Source)
  to java.util.concurrent.FutureTask$ Sync.innerRun (unknown Source)
  at java.util.concurrent.FutureTask.run (unknown Source)
  to java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (unknown Source)
  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (unknown Source)
  at java.lang.Thread.run (unknown Source)

  The world and the idea?

  Thank you much for the help.

  Greetings

  Andreas

  Hello everyone,

  problem is solved :-).

  I have set up the rΘseau (Backend, Frontend etc.) and then I started the installation of VSA program. I have overread that Setup create all - also the hole of the configuration of the network.

  Andreas

• Microsoft lifecam hd-5000 problem Installtion

  My system is Windows xp home edition. I have uppluged and reconnected to my usb port several times, tried different 2.0 ports, connected my old webcam and recognized computer, restarted my computer several times and reinstalled at least four times. I have two original disk Microsoft hd-5000 3.0 installation and I tried both, I do not see the web cam in Device Manager. I don't understand why my computer recognizes my five or six web cam when you plug it in but nothing when I plug the Microsoft hd-5000.

  Hello

  1. you get any error message?

  2. the Microsoft lifecam works any other computer?

  3. don't you make changes to the computer before the show?

  Please follow the steps below.

  Method 1:

  Run the Microsoft Fixit from the link below.

  http://support.Microsoft.com/mats/hardware_device_problems/

   

  Method 2:

  Follow the steps from the link below.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/929087

• I have problem installtion, does anyone know how to use "Windows Setup Troubleshooter?"

  Original title: resolution of configuration issues.

  Does anyone know how to use "Windows Setup Troubleshooter"?  I have a problem installing and I found an article on WST but I can't find it when I search on my machine S2008-R2.  This is a feature I have to add, or is it a downloadable application?

  Hello

  Thanks for choosing Microsoft Community!

  If I understand correctly, you want the resolution of Windows installation problems.

  Please answer these questions:

  1. don't want to install the program on Windows Server 2008?

  2. what program you are not able to install?

  3. what happens when you try to install?

  If you have questions about Windows server 2008, you can ask the question here:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  If you have questions about the Windows 7 operating system, please respond with more information to help you further.

• I need help! Problems of the Installtion of the Design Suite CS6

  When installation gets to 80% the programm I show a window where I read "Please leave application follow 'SafariiCloudHist'. '. But there is no other open app, the finder and the installationapp only. then I can leave the installation only. What can I do?

  What follows could provide the required information, because it is a similar problem...

  Guest of installation of close SafariNotificati

  https://helpx.Adobe.com/Acrobat/KB/install-prompt-close-safarinotificati.html

• Problems with the data store when installting ESXi USB

  I had problems getting free ESXi reliable running.  I am able to install a flash drive fine and initially everything works and I am able to create virtual machines.  Upon the first connection to vSphere, told me that there is no data store, so I create one on my controller LSI 400 GB RAID1 8308elp without problem.  However, once I reboot the server ESXi I lose the data store.  When I check my warehouses under Configuration it is listed.  At this point, if I try to create the data store, yet once I get "Error during the configuration of the host".  I read about using fdisk from the console when people have had this problem but there is no access console in the free version.  Is that what I can do to work around this problem?

  Right in the HCL... SAS/SATA-RAID of the lists for older versions, SCSI for the current version... Search within i/o devices for "LSI 8308elp '...

  VMware VCP4

  Review the allocation of points for "useful" or "right" answers.

• installtion with forms 11g problem

  Hi all
  I have already installed in my system oracle database 10g and 10g (windows xp2 o.s) forms.
  
  but when I install web logic and form of oracle 11g amine is TNS showing error (my interlocutor does not
  After the installation of the logic of the web and forms 11 g)
  
  where is the problem
  is it possible or do I uninstall form 10g,
  oracle Forms does not work on the oracle 10g database.
  I want to know where is the problem
  If any user successfully installed the server logic oracle forms 11g and web
  with shapes datatbase 10 g and oracle 10 g.
  
  so give me kinds screeen to installation details
  web logic server and forms 11g.

  Yes,

  You need WLS_FORMS to run the forms for 11g.

  Are how TNS error you?

  To form 11g to work, it is necessary to install WebLogic

• Problem installting Windows 7 on Mac

  I tried to install a Windows & on the Bootcamp on my mac, everything installs fine except when he ended the reboot shows flashin which as effect and does nothing else

  What model of Mac is this?

  How old is your iMac?

  Have you updated your firmware on Macs?

  Also make sure you download the latest version of the Boot Camp software:

  Yes, you can download Boot Camp support 5 here.

• Installting Windows 7 installation on DG41TY motherboard problem

  Hi all

  I recently brought a DG41TY motherboard recently and I'm on my Core 2 Duo 2.2 GHz processor in there place. When I tried to install windows 7 Ultimate part installation obtained above, but in the final phase of the facility after giving a name to the PC and the parameter password, the process of moving to finalize the setting screen, but after that the system starts automatically it after its system, not at all enter the same operating system not get windows also boot screen There is only a blinking screen.

  Could someone help me on this emergency?

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

• R12 (gel during installtion) installation on windows 2003 problems

  Hello
  
  I try to install R12 on windows 2003.
  As per document 402311.1 , I've supported every step of pre-installation (as cygwin installation, active perl, visual c++ 8.0, jre).
  
  After you create the staging area, I started installation of oracle applications using 'rapidwiz.cmd '.
  
  Nothing is progressing in step 1 (at 5%). It shows 'done unzip 38 on 93 '.
  
  Operating system works properly and I am able to perform other activities while the facility was suspended.
  
  I don't know why the installation is hanging / freezing at 5%.
  
  Suggestions please...

  user454028,

  How did you create the staging area directory?

  You are able to extract the following file manually in the directory "C:\StageR12\oraDB\Disk2\dbts\stage"?

• Satellite Pro A60: Generic Host Process for Win32 Services has encountered a problem

  Satellite Pro A60 - Win XP Pro SP2.
  I recently started getting this error:

  "Generic Host Process for Win32 Services has encountered a problem and needs to close." We are sorry for the inconvenience. »

  and I was wondering if there are any known issues specific to Toshibas or specific to the operating system?

  Any guidance advice appreciated.

  Well, it could be a virus or malware.
  I recommend you to update all your anti anti-virus applications and if you have not installed a program such as ad-aware or spyware so you need to do.

  Check if your all the service pack are up-to-date. Last use the installtion of new OS could help

• Windows XP trying to update and get the error: another installtion progresses.

  original title: Windows XP, try to update and get the error: another installtion progresses.   That all before you proceed with this installation. How can I know what is the installation and the status?

  Windows XP trying to update and get the error: "another installtion progresses.   That completes before proceeding with this installation. "How can I know what is the installation and the status?

  Hello

  1. are you referring to Windows update?
  2 have you made changes on the computer before this problem?

  Please answer these questions and to provide more specific information on the issue. This could help us help you better.

  You can check the question in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  a. click Startand then click run.
  b. type msconfigand click OK.

  The System Configuration Utility dialog box appears.

  c. click on the general tab, click Normal Startup - load all device drivers and services and then click OK.
  d. When you are prompted, click on restart to restart the computer.