Integrated webcam fail on Satellite P200

Similar Questions

• Cannot use webcam on my Satellite P200

  I recently bought a Satellite P200 with integrated webcam. When I try to turn on the webcam I sometimes the message "locked by another application" and the cam will not turn on.

  -What it means and how the problem can be solved?

  Hello

  I have no solution but if you have time check it please http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=26376

  Maybe it will help you.
  Good bye

• BIOS update failed on Satellite P200 - 13 M

  Hello world

  I have a Satellite P200, (PSPB6E-03G01XFR).
  Yesterday, after attempting to update my BIOS version with the windows application, my phone was cut.

  I downloaded the new version of the bios of Toshiba-Europe Web site (v2.30) and I tried to use the Crisis_Recovery_Disk but no result. :(
  Can someone help me please?

  Unfortunately, in your case only the ASP can help you.

  Does your BIOS update fails and only the ASP can update the ROM module damaged by using a special version of the BIOS

  So, don t waste time and ask the ASP in your country to help.

  Best regards dude

• Recovery failed on Satellite P200

  Hello.

  At the beginning I wanted to install WinXP on a Satellite P200 but then I read many things on the internet and which might be more difficult than I first thought.

  Now, I only get it back with the RecoveryCD came with the laptop.

  It s my cousin's laptop. It of a little slow and has a lot of garbage on this matter, we decided to update the system.
  But the Toshiba Recovery says:

  + Cheking HDD1 +.
  + HDD1 found! +
  + BIOS 0 is disk 0 +.
  + BIOS 1 is disc +.
  + ERROR: GETHDD get physical disk HARD failed! +
  Press any key to continue... +.

  So I press a key, it says:

  + Waiting for ODD vacancies... +.
  + STRANGE ready F: drive. +
  + Check for support in the F: drive... +.
  + Continue... +.
  + Failed to initialize the raid class. +
  + No RAID - proceed normally... +.

  + X:\windows\system32>+

  I'm not able to recover, but I have no idea why. I also Don t want to delete everything before making the recovery, cause I m afraid that nothing will work after that.
  Notepad starts in Vista, but it is slow, as I have said before. Is there a chance the recovery work?

  The CD is very good and has never used it before and it is also the original.

  Thank you much for the help.
  Anna

  EDIT:
  I forgot to say, I followed the instructions on the CD case. I restarted the computer and you press F12, and then I chose the DVD drive and then start the CD. But I have not tried on the running system of Vista, because everywhere I read it wrong.

  Hello

  I read your ad three times over but now I m a bit confused

  If you want to return to factory settings, you must only start since the Toshiba recovery disc. Before the disc begins to install the new OS the whole HARD disk will be wiped so before recovery you can install everything, also Linux, Vista or something else because it will be deleted.

  So please follow the instructions on the CD case you have posted. I put t know where read you that isn't true, but in fact the drive erases the HARD disk and installs a new OS.

  If you have any other questions, please let us know.

• Webcam integrated Satellite P200 - Solution

  Hi Jaba

  Because you have locked the built-in webcam on Satellite P200 recently ceased to theme of work and it doesn't seem to be a way to send you an email or private message then I will reply to you here.

  No I'm not despised.

  Just that it would just be nice to hear if the solutions I provided were of no help to other users suffering from the same problem in view of the fact that the response provided by the assistance of Toshiba has not remedied it.

  Concerning

  clint1

  Hey Buddy

  > Because you have locked the built-in webcam on Satellite P200 recently ceased to theme of work and it doesn't seem to be a way to send you an email or private message then I will reply to you here.
  You think I ve locked the thread? : D LOL
  Boyfriend sorry but I m only passionate about Toshiba and forum user and not an administrator of the forum. (but maybe I should send him an email to Toshiba if I could join the team of Directors of Toshiba: D)

  Did you mean this thread?
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=132523#132523

  Seems the thread is locked because he s solved
  And as I have already said. Great that you posted the solution but don t wait a few extras to other users, it's a forum like the majority of the forums on the net

• Satellite P200-1EE PSPB6E: problem of battery and Webcam

  Hiya People,

  New on the Toshiba Forums here and stuck on a problem I have with this laptop.
  I have a Satellite P200-1EE model number: PSPB6E 0GM028EN. The election House of Uni a few days ago my refuses to laptop to turn on the laptop on and happening only when I put a Power cable in.

  I took out the battery cleaned with a can of Air and put it again and it worked but the next time I did nothing happened.
  Strange thing is that, once it is running, and I take the power wire, it works fine.

  2nd problem is the software integrated Webcam won't work for me. Sometimes, and when I restarted the laptop it works fine again.
  I tried to reinstall the driver but it gives warning that the newest is already installed on my laptop.
  Am I right in thinking that its due to the new version?

  Any help or Suggestions are appreciated and thanks in advance

  Seamus

  > Laptop on and lights up only when I put a power cable. I took out the battery cleaned with a can of Air and put it again and it worked but the next time I did nothing happened. Strange thing is that, once it is running, and I take the power wire, it works fine.

  It is maybe something wrong with the battery of laptops of s?
  How old is your laptop? Guarantee is valid?

  As far as I know, the guarantee covers the battery for one year. Then maybe you should ask and ASP in your country for a control? Maybe the battery doesn't work as it should.

  > 2nd problem is the software integrated Webcam won't work for me. Sometimes, and when I restarted the laptop it works fine again. I tried to reinstall the driver but it gives warning that the newest is already installed on my laptop. Am I right in thinking that its due to the new version?

  I n t have a solution to deliver you but I assume that it s associated with the software/driver of webcam.
  You should visit the European driver Toshiba page from time to time and need to check if an update is available.

  Good luck

• Satellite R630 - integrated webcam does not

  Hello

  I hope someone can help me.

  My built-in webcam on my Toshiba Satellite R630 spontaneously stopped working in the last two weeks.

  I tried:

  -Check if it is enabled in the BIOS and there is no option to select a webcam here.
  -Restore my laptop computer to a previous state when the camera worked. This no longer works.
  -Updated the driver for the webcam - it installs the driver but then it disappears and nothing happens.

  A few things that it might help to know:

  -In Device Manager, "imaging devices" are missing, so I can't find the driver for the webcam here.
  -J' used to get a pop-up whenever I turned on my laptop which was loading a webcam bluetooth but saying that he could not. This stopped happening; I think I turned it off in msconfig.
  -It is not a hardware problem
  -Yesterday, I had a weird time breakthrough - I downloaded an app on my phone to try to use it as a webcam through bluetooth. I had activated bluetooth on my phone and laptop. I plugged my phone into my laptop and the pop-up the camera bluetooth (see previous point) came, but this time worked without the error message. However, instead of my phone works like a webcam, the blue light came next to my integrated webcam and who has started working. I thought it was fixed then all closed and ejected my phone and webcam stopped working again. I tried to repeat this sequence, but with no joy.

  I'm really frustrated and ideas. Can anyone help?

  Hello

  If imagine device isn't listed in Device Manager, it means that the module is not found. Even if the driver is not installed, the module must be included in the BIOS as imagine device, unknown device, etc.
  But this isn't the case

  So I think there are two possibilities: the module's fault or the connection between the module and the motherboard (Controller) isn t put in place.

  As far as I know the internal webcam module is connected to the USB controller.
  If the connection drops (cable) the module will not be recognized in Device Manager

  From my point of few, it must be a nuisance material

• Satellite T130: integrated webcam has stopped working

  Hi, I have the same problem of the bellows of the question, as I looked around and I was not able to find the answer I need.
  I have a Satellite T130 and, suddenly, the integrated webcam has stopped working properly. A blue light is on, but there is no picture. What can I do?
  Thank you

  Hi mate

  I have the same problem, sometimes using my U400.
  This happens if the room is dark for the camera.
  If something like this happens to you that I recommend that you keep your finger in front of the webcam for a short period.
  After that, the image of the webcam should come back again in my case it worked.

• Satellite A200 - driver Open Webcam fail

  Hello

  My Satellite A200 recently dead boot disc and I had it replaced. Vista was placed in this framework through restoration SOE from Toshiba. Now the Webcam is not working, it gives the following error when starting the machine:

  "Driver Webcam Fail open. Please restart camera or computer. »

  I tried to install the latest updates of the Chicony driver but still no luck

  also, I found a lot of information through google about problems of registry entry with the installer on this issue. They recommend a rather complicated registry hack to fix it. I want to find an installer that works rather than hack the registry

  can someone advise me? Thanks in advance

  Hello

  Well, if you have already updated the driver for the webcam, I would recommend updated the BIOS too. The latest version is available for download on the Toshiba site. Before you download, compare the model number, if the update supports your laptop!

  If it doesn t work I think there seems to be a hardware malfunction, maybe the webcam cable must be renewed or something else. I think that the best option would be to contact a technician laptop for diagnosis.

• Satellite P200-1 b 6: Sound Driver update fails, and HD-DVD player does not work

  I just bought a laptop Satellite P200-1 b 6 and spent the day installing the updates recommended by the TEMPO programme. One of them was an update of RealTek audio driver but on run this it fails at about 80% of the way through with an error: "install Realtek HD Audio Driver failure!

  Now, the reader of HD DVD, Toshiba will fail with an error "unable to output the video to an external device.

  Please change your display keys of the device by pressing the Fn + F5 after the end of the application "." I tried this but it seems to have no effect.

  I'm now regretting starting to update the drivers installed. Should I try to rebuild the machine using the recovery discs or is there another solution that someone found? Or if others have found the upgrade work?

  All advice welcome

  Hello

  When I started using PC, one of my friends told me something: do not touch the well-executed system. I know that you, like so many other people out there, have updated things but as you can see, it can go in the wrong direction.

  This TEMPO software is good, but if all goes well the leave it as it is. What you can try is to use the System Restore tool and move the BONES to earlier time and hope everything will be OK again.

  Please post the result.

• Driver webcam open fail on Satellite A305-S6872

  My problem is the following

  I have a laptop A305-S6872 Satellite with a built-in webcam, I had to restore it with the cd provided with the laptop and I reinstalled the assistant webcam software and thought it was but it keeps saying "driver open webcam fail. Please restart camera or computer.

  Does anyone know how to fix this

  Hi mate

  This message might appear because of some problems of compatibility between the software of the webcam and the 3rd party software such as Skype, Live messenger, etc.

  In your case I recommend you remove the software for the webcam of the Setup again.
  Then clean the OS using CCLeaner.
  After that, you could reinstall the webcam software and must clear the webcam software in msconfig--> startup.

  This prevents the software from loading automatically.

• Satellite P200 - no integrated noise "subwoofer".

  Hello!
  I have a Toshiba Satellite P200-1FM with a high "subwoofer". At least the manual says theres is one and its supposed to be at the bottom of the laptop. I can see it and it looks like the picture in the manual. I tried it prick with a toothpick (of course) just to make sure that theres a speaker it and not just plastic. There is some flex in it and it sure sounds like a speaker when I poke him. However, my problem is theres no noise coming from him.

  I tried both Vista and XP, and several different drivers without success. Anyone got any ideas? Anyone got the same laptop as I do? Your "subwoofer" work? The other speakers work fine, btw.

  Help, please!

  How do you know that your Satellite P200 subwoofer integrated?

• Satellite P200 - failed to connect to the Windows Services

  After starting Windows Vista on my Satellite P200, I received a message: failed to connect to any Windows Services.The event notification system file are not available.
  Use restricted to the mode of administration.

  No network supports either (wifi, Ethernet,...). At least I can use the PC in batch mode!
  Unable to retrieve a previous saved file system.

  I need to restore my Toshiba restore disk Win Vista?

  Do you offer a lighter solution?

  It's strange, but what you mean with batch mode?
  You can start in safe mode?

  I think the best way is to reinstall Windows with the recovery disk. It only takes a few minutes and then you have the new installation of Windows with all the drivers and tools of Toshiba.

• Driver webcam open fail on Satellite A300-1MC

  Whenever I try to start my integrated webcam (Chicony Camera Assistant Software) the message "driver Webcam open fail." Please restart camera or computer. "is displayed on the computer.
  First of all, I do not understand what it means and then I rebooted both the camera and the computer, as well as repair the camera software.

  I looked for updates and drivers, etc., but nothing works. I also read every manual available in search of an answer, but I can t seem to find something that is of no help.
  I was wondering if someone had an answer for me, or tell me what I need to do.

  Hello

  I had the same problem a few weeks ago and I could solve the problem by updating the driver for the webcam on the Toshiba site.
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  So, download the latest version, delete the old and reboot the laptop. Then install the new version.

  I doubt that you were looking for updates for the Toshiba shows a driver for webcam.

• Webcam does not work on Satellite P200-14N

  Just got me a new Satellite P200-14N, and one of the first things I tried was to use the webcam.
  All other things worked, but I could not the operation of the webcam.
  Couldn't find any refernce whatsoever of it on my pc.

  The cam is located in the upper part of my screen but the sw is not found. (at least I can't find it).
  Anyone who can help me out on this?
  Thank you very much.

  Kind regards
  Cees van der Leeuw

  Hello

  On my friends P200 web cam works fantastic. The use is very simple. As far as I know the software web cam starts up automatically when the OS starts and you can see small icons in the taskbar near the clock.

  Launch webcam software you must move the mouse on the left side of the screen because it is placed hidden toolbar. By default, the toolbar is hidden. Check it please.