Y560 screen turns off automatically

Similar Questions

• Satellite A100 - 784 PSAANE - screen turns off automatically

  Hi friends,

  I have a Toshiba Satellite A100 - 784 PSAANE with windows visa Home Basic edition.
  Now for 15-20 days I am facing a strange problem. The screen of the laptop emits a sometimes (not necessarily every time) and then when the frequency increases the display turns off automatically!
  Then I must Hibernate or he put laptop to sleep to find again the screen... Seriously, I don't understand the problem.

  Please help me.
  Thanks in advance

  Hi Julie,.

  It sounds as if something is harming your graphics driver causing the display to turn off. If the problem occurs only when you use certain applications or only started after installing a new application you may need to restore your system to a restore point before new applications have been installed. As a test, you can try to start your system in safe mode and see if the problem persists.

  I also recommend that you re-install your graphics drivers to see if it improves the problem.

  Other possibilities are that your graphics chip is a failure or overheating causing this problem in which case you have to return your laptop to a Service approved for the additional diagnostic agent.

  My last thought is that you may have a problem with the inverter FL (the component that provides the lighting of your LCD screen). Check, when the screen turns off, if you can still see a residual image on the screen. If yes then the FL inverter is definitely at fault.

  Kind regards

• Equium A100-027: can not get the screen turns off automatically in Vista

  Hello

  Got one of the new A100-027 of the load with Vista a couple of weeks. I can't get the screen to stop automatically when the appliance is left unattended. Standard windows screen saver or power options makes no difference. The screen is always on when I get back to the schedule of the machine later, I don t want to put a 'sleep' mode because the machine is internet access.

  In desperation I changed the option to close the display does not go into mode 'sleep', but it would be nice if the screen would make her s auto off, instead of having to close the screen every time.

  Thank you very much
  Chris

  A bit of an update, I found the screen stops automatically in normal conditions. But then, I leave the computer running a program of file sharing peer-to-peer on the net that he will not cut the screen down. Even minimize the program doesn t allow the screen to close.

• Screen does not turn off automatically

  Hello

  I have problems with my display does not turn off automatically (for example, after 3 minutes of inactivity). What is happening is that the display actually goes to the maximum brightness, even if the screen indicates that the brightness is set to 0.

  Should which driver I update to solve this problem?

  Thank you

  Ok. I decided to uninstall AMD video drivers and reinstalled them. Now its working as it should.

  See you soon...

• Stop the screen from turning off automatically

  Hello

  Anyone know how I can force the screen turn off if the touch screen (BB9500) is not touched for a while?

  Hello

  Take a look at net.rim.device.api.system.Backlight.

  Let me know if it helps.

  Otherwise, I can explain more and give u some code examples.

  Paul

• Hi why my iphone wifi turn off automatically when I lock my device? And how can I solve this problem

  Hello

  Why my wifi from the iphone 6 turn off automatically when I lock my device? And how can I solve this problem?

  Yes, it's designed for it. If, however, you plug, WiFi will not drop when the screen is locked.

• Satellite M200 screen turns off after that start & battery does not charge

  Hello, I am from Jakarta, Indonesia
  I have a problem with my Toshiba Satellite M200 Notebook (running Windows 7 Home Premium)

  After I press the power button to the top of my laptop, it works fine display BIOS and Windows startup screen.
  but after that my monitor off all of a sudden when Windows is supposed to show the login screen.

  Sometimes, the monitor doesn't turn off, but shows a lower resolution (I don't know exactly what resolution, 1024 x 768 or 800 x 600, i use maybe 1280 x 800)
  so the only thing I can do is, press the power button to stop bad then press power again turns on, my monitor works normally
  try to stop and then turn on again in a few hours later, problems still comes once.

  from the moment where I install Windows 7, I use 8.15.10.1930 version of the driver (downloaded from Download Center of Intel, which included Assistant TV Intel)
  2 days ago, my friend told me that I should install the driver from the Toshiba site support, so I went to csd.toshiba.com and download the 8.15.10.1825 version of this site (which is not included Assistant TV Intel)

  my monitor works normally after I installed the driver I of csd.toshiba.com, so I think that the problem because the Intel TV Wizard somehow messed with my laptop. But this morning this problem once again, my turns just monitor suddenly...

  In addition, this problem seems to be my battery was unable to recharge, my completely reloaded Windows shows, but when I plugged my AC adapter,
  There are 15-20 minutes before my laptop turns off automatically

  Three months ago, I just brought my laptop to the local Service Center of Toshiba and bought the new motherboard to replace my old mobo (which have a VGA problem too!)
  Is there something I can do (related to Windows or driver/software) or I can bring my notebook at the center of service again?
  are they somehow an incorrect wiring when replacing my motherboard?
  and am I need to replace my battery too?

  I use this laptop for about a year and a half and there is nothing wrong with my battery before replacing the motherboard

  any help would be appreciated :D

  Hello

  Talk about your screen, the a graphics driver causes this malfunction with resolution and turn off. Go to the page of the toshiba driver and download the correct Vga driver for your model. I see, you are running Windows 7, if there is no driver for win7, try the vista driver.
  On your power supply, you have used for the year and a half and he is released in 20 minutes, there is nothing strange. It's standard for power supply operating period, need to be replaced. Just to be sure, you can check with a new battery. You will see that the trick works as expected.

  Welcome them

• Gigaframe L81 - after 2-3 seconds, the LCD screen turns off

  Hello!

  I think, I missconfigurated my camera... I put the automatic light (auto light) options, then the LCD is turned off. OK, its light of day here, but how can she Cook?

  And - perhaps because of the thing said? -its LCD screen turns off every time, when I push the power on button. I'm tired of using the reset switch, but she has - at least, in the LCD - no effect.

  Device is reset, then lights up the screen, I see him starting, I can touch control "buttons" on the right side (I can see the blue lights), but after only 2-3 seconds, the LCD display turns off again.

  Although I can do anything on my camera - attach PC files, copy or dele (ordered from Windows) etc. I just don't see anything in the LCD screen.

  What's wrong?

  If it still does not work after resetting it, then it may be a hardware problem.

  I think that you will need for repair/replacement.

• My acer aspire one does not start. the scrolling windows screen, then screen turns off. logon appears and resets, sys

  My acer aspire one does not start. the scrolling windows screen, then screen turns off. but after a long time (45mins) the login screen appears and d sysytem restarts. I have a multi boot with 2 installations of xp, and this happens with both bones. not able to access my sys to bak - up also. all f8 options were considered, but no use.

  I have some bad sectors on d: (have total 3 drive partitions c:, d:, e: with xp on c: and e :))
  the sys wud show a blue screen and reboot when certain file wud b accessible on d:... now the sys cannot start all... pls help...

  Hi Srimotu,

  ·         You get an error message or an error code?

  ·         Have you made changes on the computer before this problem?

  Follow these methods.

  Method 1: Try starting it in last known good configuration.

  http://support.Microsoft.com/kb/307852

  Method 2: Try to start in safe mode.

  http://support.Microsoft.com/kb/315222

  If you are able to boot into safe mode, try a clean boot.

  http://support.Microsoft.com/kb/310353

  Note: After the clean boot for troubleshooting, return the computer to a Normal startupmode.

  Method 3: Disconnect external devices such as printer, scanner, etc. and try to start.

  Also disable automatic restart in the event of system failure

  http://support.Microsoft.com/kb/307973

• How can I get the screensaver to stop after a few minutes, while the screen turns off.

  original title: computer sleeps

  I leave my computer on all night.  When I'm done with it for the day, after 5 minutes, the screen saver turns on.  How can I get the screensaver to stop after a few minutes, while the screen turns off.  What we call that?  Sleep is - this Mode?  Hibernate? Thank you!

  Hi miztex37,

  ·         You want to put the computer in sleep mode?

  See the following article to see if it helps.

  Microsoft Windows XP - automatically put your computer into standby mode

  See also:

  Microsoft Windows XP - manually put your computer in sleep mode

• My Z5 dual display does not turn off automatically

  The screen does not turn off automatically even after 7 straight hours!

  As, when I charge the phone, the lids of the screen upward because of the notification but it does turn off the display automatically even after more than 10 minutes.

  I leave the phone at home (100% battery) and arriving at the House, after 12 hours later, the screen is still the battery drops to 30%. It drains my battery so.

  At least I have the display off by pressing the power button / etc, the screen does not turn off automatically.

  I tried to change settings in 30 seconds and 1 minute and others, but the settings do not seem to.

  Please help me solve this problem. Thank you.

  A third-party application is causing this behavior, either the app, an app that you downloaded, you'll need to uninstall a

• Optimization of the battery turns off automatically

  Hello..

  In marshamallow optimization of battery option turns off automatically. After update, it worked very well, but about 2-3 days later. I noticed that it turns off not only during the charge, but also normally. Please solve this problem.

  Too bad, he'll come back always to not optimized if you return to this screen.

• Computer turns off automatically

  Hello

  my Windows Vista laptop turns off automatically. This isn't a standby automatic regular, Hibernate or shutdown. The computer will just empty. When you try to turn it back on, the message that "the computer was not properly extinguished" sometimes appears.

  This auto disable happens irregularly. Sometimes it seems to happen more often when the computer made the task more or heavier. But the computer seems to be overheating.

  Someone has an idea what could be the problem and I can try to do about it?

  GRT, M

  Suggestions only. I may be far away...

  1. If this problem started not more than 10-15 days ago, and if you remember a time when you did not have this problem, please do a system restore. Choose a 'good' day as your restore point.

  Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
  To sit and wait. The machine restarts when it's done.

  Note: In most cases, do it in safe mode system restore is more preferable.
  Here's how to get safe mode:

  Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. The top/down arrow and select Safe Mode.

  2. If it is not an option, going to Safe Mode > selectlast known good Configuration and run it.

  
  t-4-2

• Access code is lost as soon as the screen turns off

  When I turn my wrist after that my Apple Watch screen exploded, I need to enter the access code. I turn on the wrist, the screen turns off, I turn back, screen lights up, I need to re-enter the password. And so on and so forth. The watch does not maintain the code.

  I am white white, is not dense hairs on my wrist, no tattoos and I wear the watch very well on my skin.

  The funny thing is: it is a replacement watch, I got today. The other had the same problem, but this is probably because the bottom of the watch with the sensors fell, must have damaged the sensor cable. But this one is brand new.

  Hello

  Make sure the wrist detection is enabled:

  • On your iPhone, in the application of the watch, go to: My Watch (tab) > General > detection of wrist - turn on.

• IPad 2 Air after update to iOS10 wifi turns off automatically.

  IPad 2 Air after update to iOS10 wifi turns off automatically.

  Hello. Could you please identify your router? Also try to describe a little more when it stops, and you can reconnect after that.