Interactive report of the year of a date

Similar Questions

• Is - this too ambitious? Tabular no-show with interactive report in the subregion, showing the latest entries.

  Is this too much to expect in Apex 5.01?

  I have an application which records people entering an area.

  The idea is to scan badges and save time and the date of that entry.

  This is accomplished with a simple form based on the table of the newspaper.

  In a subregion of the form, I would have an interactive report that shows to all those who have entered sort by date and time entry descendant who visited today is obvious.

  I join the attendant to be able to use the interactive report to be able to select a particular line that could be recovered and placed in the main form to change (a bit like the model of interactive report with a link to a form where updates can be made.)

  I can create the report form and the subregion and that seems to work very well for journal entries, but I don't have a clue as to how I would go on the use of the report for access to update data in the form section.

  I would be eternally grateful if someone could point me in the right direction!

  Is this something that is hard to do in Apex?

  Thank you!

  Mason

  Masong says:

  Is this too much to expect in Apex 5.01?

  I have an application which records people entering an area.

  The idea is to scan badges and save time and the date of that entry.

  This is accomplished with a simple form based on the table of the newspaper.

  In a subregion of the form, I would have an interactive report that shows to all those who have entered sort by date and time entry descendant who visited today is obvious.

  I join the attendant to be able to use the interactive report to be able to select a particular line that could be recovered and placed in the main form to change (a bit like the model of interactive report with a link to a form where updates can be made.)

  I can create the report form and the subregion and that seems to work very well for journal entries, but I don't have a clue as to how I would go on the use of the report for access to update data in the form section.

  I would be eternally grateful if someone could point me in the right direction!

  Is this something that is hard to do in Apex?

  Not at all. Try to use the wizard to create a Page to create a form on a Table with report based on the table of the newspaper (choose Normal for page mode and Interactive for the implementation of the report). When finished, separate report and pages of form will have been generated. Go to the report page and copy the region interactive report on the page of the form. The report page can then be deleted if it is not required.

• Mix of traditional and interactive reports fails the process of RESETTING of PAGINATION.

  I have a tab page where I got 3 different reports REPORT_A (classic), REPORT_B (interactive) and REPORT_C (CLASSIC) in alphabetical order. I have a page to reset pagination process that will always draw (without condition) when you visit the page with the tab.

  
  Reset pagination process that exists in the front scene of the header is set to fire but not to reset the interactive report. It affects the subsequent classic report REPORT_C as well. The REPORT_A would be reset paging very well since it exists before the interactive report. Is this a bug in apex?

  I created an application of demonstration of test with specific steps to reproduce the problem. The steps are on the demo site itself.

  http://Apex.Oracle.com/pls/Apex/f?p=56638
  SUP: testuser
  P: password

  Apex Version: 4.2.4.00.08

  In my real application I wish a dropdownlist control on the page based on which I would like to filter the data. The dropdownlist control will have a corresponding branch of after-submit who will absolutely perfect pagination to reset & RIR. But when we visit Web site by tab the above problem would break the page.

  I tried the solutions like gReport.search ('SEARCH') but that will only set the interactive report, not the classic REPORT_C. It's just a hack anyway.

  Any ideas. ?

  Hello

  Create before that the process header on page 12 that calls APEX_UTIL. IR_RESET

  Kind regards
  Jari

• How to get only the year of a date?

  I try to shoot only the year of a date and does not know how this can be done. I tried the SUBSTR function but its does not not how I think. What I want to do, it is write a condition indicating the year of birth of point = current year minus 23, I have a calc than the figures of the age of the difference in the date of birth and the current year, but I'd really like to just write a condition based just a years. Is this possible?

  Hello
  SUBSTR only works on a string. To extract parts of a date, you must use the TO_CHAR command.

  For the year, you would use this: TO_CHAR (the_date, 'YYYY')

  To_char takes 2 switches, the date to be handled and the part to be extracted, with the portion between apostrophes.

  Once you get used to manipulate dates as this other common areas are: DD - extracts the day of the month, MY snippet code to 3 characters for the month.

  For example, you can use this: TO_CHAR(sysdate,'DD-MON-YYYY') and it converts the current date, June 7, 2012 to June 7, 2012

  Hope this helps
  Best wishes
  Michael

• How to move the form of interactive report on the left side to the right?

  the Apex 4:
  I write application in Hebrew, so I need to put in the page template dir = "RTL".
  all report and button and point moving to the right, but
  the stay of interactive report on the left side of the page (instead of right).
  
  Does anyone have an idea how to change the location?
  
  Thank you
  Return on investment

  Hello

  For the research on the copy of the side section right hand following the report in your HTML page header is on.

  Graham

• Bug? Interactive report includes the column excluded research

  Apex 3.1
  
  I've created an interactive report with a query that includes a 'expensive' column (a function call). To improve performance, I want to exclude this search/filter column.
  
  I unchecked everything under "allow users to"... (filter) on the column attributes page. The column is no longer in the drop-down list under the microscope in the interactive report, but the column ("element_groups" in my example below) is always included in the SQL that is generated when the user makes a search via the "All columns" option (default):
  

  select 
         "CMPCODE",
         "CODE",
         "NAME",
         "SNAME",
         "ACCOUNTTYPE",
         "ELEMENT_GROUPS",
         count(*) over () as apxws_row_cnt
   from (
  select  *  from (
  select ae.cmpcode, ae.code, ae.name, ae.sname, ae.accounttype,
    string_util_pkg.join_str (cursor(select distinct grpcode from accounting_element_group where cmpcode = ae.cmpcode and code = ae.code order by 1), ',') as element_groups
  from accounting_element ae
  where ae.elmlevel = :p852_elmlevel
  )  r
  where ((instr(upper("CMPCODE"),upper(:APXWS_SEARCH_STRING_1)) > 0
      or instr(upper("CODE"),upper(:APXWS_SEARCH_STRING_1)) > 0
      or instr(upper("NAME"),upper(:APXWS_SEARCH_STRING_1)) > 0
      or instr(upper("SNAME"),upper(:APXWS_SEARCH_STRING_1)) > 0
      or instr(upper("ACCOUNTTYPE"),upper(:APXWS_SEARCH_STRING_1)) > 0
      or instr(upper("ELEMENT_GROUPS"),upper(:APXWS_SEARCH_STRING_1)) > 0
  ))
  ) r where rownum <= to_number(:APXWS_MAX_ROW_CNT) 
   order by "CMPCODE","NAME","CODE"

  In my view, the column should be excluded from "All columns" research when the column was set to prevent the user from filtering on it.
  
  The same problem is reported here: interactive - report no research on all columns
  
  Is this a bug? Fixed some 3.2 Apex? Apex 4? No work around?
  
  -Morten
  
  http://ORA-00001.blogspot.com

  Hello

  Yes, it is a known problem.
  It seems that it is fixed on the Apex 4.0.2.00.06
  http://www.Oracle.com/technetwork/developer-tools/Apex/application-express/402-patch-189110.html#CHDIHDIB

  Kind regards
  Jari

• Call the procedure to set the context before interactive report refreshes the data

  Hi guys,.

  I have a question mind an interactive report which takes the data in a view.

  The problem is that whenever I take the data from the database I need to define a context (user name and password) before running the query so the view will be taken into account the context and return only the lines that I have access.

  Everything works fine when I'm first loading of the page: I have first to define the context, then load all the data I need on the page, including the IR. But when I try to apply IR filters, or even don't go to the next page no data is returned. I believe this happens because the context is not defined before the execution of the query to load the data and I don't seem to find a way to put it.

  I tried to add a dynamic action on some events on IR (change, clicking, etc.) that executes the procedure to set the context, but without success - even if the event is raised, the report still doesn't return any data.

  Can someone help me with this issue please?

  Florin

  Use the attributes of application security Code PL/SQL of the initialization/cleanup of the database Session to do this: http://docs.oracle.com/cd/E37097_01/doc/doc.42/e35125/bldr_attr.htm#HTMDB28929

• How to display data in an interactive report on the form field?

  Hello
  
  I've created an interactive report with its form (goal to create and edit).
  Then, I created a new project with its early date and email id that is assigned to the project.
  When I clicked on the edit button, it opens the edit form and displays the same date, I entered but email id is not displayed.
  Instead, it shows the default value of the e-mail ID LOV, which is "- select Email ID -"
  How can I view the identification of email that I entered?
  
  Thank you
  Guy

  Hello Guy,.

  To discuss your design: why not store the PM_PERSON ID in the PROJECT table? Now, you store addresses several times (in PM_PERSON and in many PROJECT files), what happens if the email address change... (purely hypothetical, of course)...
  And create a foreign key between the PROJECTS and PM_PERSON also...

  Greetings,
  Roel
  http://roelhartman.blogspot.com/
  You can reward this response in marking it as useful or Correct ;-)

• Interactive report with the hierarchy

  Hello

  In Apex Oracle 5.1, I tried to use an interactive report to view details of employee based on a hierarchy. I used the query to display data below:

  SELECT last_name, employe_id, manager_id, LEVEL

  Employees

  START WITH employee_id = 100

  CONNECT BY PRIOR employee_id = manager_id

  Brothers and SŒURS of ORDER BY last_name;

  The output was as below:

  LAST_NAME EMPLOYEE_ID MANAGER_ID LEVEL

  ------------------------- ----------- ---------- ----------

  King                                100                                                       1

  Cambrault                        148                                 100                 2

  Bates                              172                                 148                 3

  Bloom                             169                                  148                3

  Fox                                 170                                  148                3

  Kumar                             173                                  148                3

  Ozer                                168                                  148               3

  Smith                               171                                  148              3

  De Haan                           102                                   100             2

  Hunold                              103                                   102             3

  Austin                               105                                   103             4

  Ernst                                 104                                   103             4

  Lorentz                              107                                   103             4

  Pataballa                           106                                    103            4

  Errazuriz                           147                                   100              2

  Ande                                 166                                    147             3

  Banda                               167                                     147             3

  ...

  Now, I would like to display data based on the connection of employees.

  For example (based on above request): If an employee named - Cambrault is the login, only employees under him (Bates, Bloom, Fox, Kumar, Smith, Ozer) and its own contact information should appear in the report.

  Please advise.

  Kind regards

  mebu

  Mebu wrote:

  Please take a look on the underside of the employees table, employee_id here will be used as a unique identifier for each lines and names of the connection will be with these employe_id. single sign on Option will be used for login purposes.

  Really?

  SQL > SELECT last_name, employe_id, manager_id, LEVEL

  2 FROM employees

  3 START WITH employee_id = to_number(:app_user)

  4 CONNECT BY PRIOR employee_id = manager_id

  5 brothers and SŒURS of ORDER BY last_name;

  LAST_NAME EMPLOYEE_ID MANAGER_ID LEVEL

  ------------------------- ----------- ---------- ----------

  Cambrault 148 100 1

  Bates 172 148 2

  Flowers 2 148 169

  Fox                              170        148          2

  Kumar 173 148 2

  Ozer                             168        148          2

  Smith, 2 148 171

• Interactive report - changing the font color of column.

  What would be the best way to change the color of the font color (data) in the interactive report without changing the model?
  
  Thank you
  
  Robert

  Then the best way is to use css as mentioned by Paul here {: identifier of the thread = 2397346}

• Interactive report with the subreport Details on the same page

  Hi all
  
  I am fairly new to APEX, sorry if my question is too obvious. I use Apex 4.0.2 on top of Oracle 11.2.
  
  I have an interactive report that lists the contents of a table. Since there are a lot of columns in this table I would like the report to only show that some identifier columns and all of the currently selected folder is displayed using another report in a separate area on the same page.
  
  The 'link' on the interactive report column is almost that, except that he jumps on another page; I would just like to have a subreport, updated with the data that is selected instead of a new page is displayed. Does anyone know how to do?
  
  Thanks for your help,
  Chris

  Chris,

  This looks like what I usually do in my referential data.

  I use the wizard to create the "report."

  I make sure that the two regions (the form and report) will be created on the same page number

  so I check/change the order of regions (second report in the first place, form)

  then I put in the form to display in the column 2

  Kind regards
  Richard

  P.S., the report shows only enough columns to recognize records. the screen displays all records

• Report of the year several

  Hi all
  
  I have a report prompt based on the year. I have 2 sections of report either we should display the prompt value-based report and the other report should show a value larger than that. Ex: If I select the year 2005 in the prompt the first report should display 2005 data and the second report should display reports more than 2005, 2006,2007 data.
  To do this, I created prompt as below.
  Column-> Calendar_Year
  -> Equals Opertaor
  Control-> drop-down list
  Show-> all values
  -> The default server Variable
  Set Variable-> presentation Variable.
  Name of the vAriable-> yr_val
  
  In the reports, I used the filter year = @{yr_val} for the first report and year > @{yr_val} for the second report.
  I'm getting first report properly but second report shows the same data rather than the selected value years.
  Please let me know how to achieve this.
  
  Thank you
  Venerable.

  for the second report first convert this filter sql and put > @{PV_VAR}. Take care of the syntax.

  This should solve the problem.

  Kind regards
  Sandeep

• Error code: 0xC004E002, the software licensing service reported that the license store contains data of the unstable after installing Windows updates.

  Original title: I installed a windows update and all of a sudden I can't connect to my computer using my password it says error data is unstable with microsoft

  It says the software licensing service reported that the license store contains inconsistent data.      I have a windows vista hp pavillian

  Code 0xC004E002

  Hi JillCollas,

  When you are in the display of error message you will get a support contact option once you click on it, it should open up Internet explorer. If you are able to open IE page, then follow the steps and see if it helps.

  a. Click Start and type cmd in the search box.

  b. right click on cmd and then click Run as administrator.

  c. at the command prompt, type the following commands and press ENTER:

  Type: net stop slsvc (it may ask you if you're sure, select Yes)

  Type: cd %windir%\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\SoftwareLicensing

  Type: Rename tokens.bar tokens.dat

  Type: cd %windir%\system32

  Type: net start slsvc

  Type: cscript slmgr.vbs - FLIR (it may take time for this will be complete, please be patient)

  Reboot twice

  You may enter the product again key, and then activate.

  For more information, you can consult the following articles:

  Error 0xC004E002 during activation of Windows Vista and Windows Server 2008

  Activating Windows: Frequently asked questions

  Hope this information is useful.

• view an interactive report at the click of a button

  Hello

  I interactive reports in which I want to dynamically show on click of a button, I put a condition report on request = Expression 1 and in the Expression, I gave the name of the button, but the report does not show even when the button is clicked, or this isn't when the page loads.

  Any guidance will be of great help.

  Thank you

  Rakesh

  HI Rakesh,

  Rakesh119-Oracle wrote:

  Hello

  I interactive reports in which I want to dynamically show on click of a button, I put a condition report on request = Expression 1 and in the Expression, I gave the name of the button, but the report does not show even when the button is clicked, or this isn't when the page loads.

  Any guidance will be of great help.

  Thank you

  Rakesh

  In addition to this all you have done.

  Create a branch and redirect to the same page

  Branch point: on Submit (after Computation, valdation and processing)

  Target type: Page of this application.

  Page: same page where you have the report.

  Request: Button name (what you have given in expression1 in the condition of report)

  When button: click on the button that you want to view report

  Hope this helps you,

  Kind regards

  Jitendra

• To create an interactive report in the apex by selecting from multiple tables

  Hi, I am creating an interactive report by selecting from multiple tables.

  SELECT w.FIRST_NAME as name, w.SURNAME as name, i.ROAD Road, i.DATE_OF_INC as DATE_OF_INC, S.STATEMENT as a STATEMENT OF Declaration

  JOIN THE

  WITNESS w

  ON w.witness_id = s.FK1_WITNESS_ID

  JOIN THE

  Incident I have

  WE

  i.incident_no = w.FK1_INCIDENT_NO

  JOIN THE

  user_station ps

  ON ps.station_id = i.nearest_station_id

  JOIN THE

  the user in.

  WE

  in. STATION_ID = ps.station_id

  WHERE po.officer_id = 1

  by I continue to encounter this error "the report query requires a unique key to identify each row. The supplied key cannot be used for this query. Please change the report attributes to define a unique key column. "ORA-01445: cannot select ROWID from where sample, a join without key preserved table view '

  So I googled around and found that in the attibutres tables report, I need to change the "LINK" COLUMN so first, I changed "Link to custom target", but the report is so I changed it to "Exclude link Clolumn" again, the report didn't report and I STILL got a blank page with only the tabs.

  I wonder you can not create a report by selecting from multiple tables?

  If you can please I need your help.

  Thank you

  You can, but in this case, it might be easier to build your report tables that are joined Oracle views and then build your report out of the newly built sight...

  Or wrap a selection around your selection with joins, and then make the where clause on the external selection...

  Thank you

  Tony Miller
  Software LuvMuffin
  Ruckersville, WILL