Interesting scenario, is it necessary to reset the logs periodically?

Similar Questions

• Always necessary to reset the default boot to Windows 7 start menu

  HP P6632f 64-bit computer

  OS Windows 7 Home Premium version

  Error messages that have been found are

  An unknown error during system restore 0 x 80070002 (used a different restore point and it worked)

  BIOHD 4 error code (this appeared on two occasions however, the computer starts with F4 in the start menu)

  There were no additions to the computer for several months, however there was a power outage that shut down computer just before it started.

  When the computer starts up goes to the first blue screen when you can press Esc for boot menu, F9 for diagnosis, etc..  The boot then fails and requires a boot disk.

  To fix this problem, I used the repair disc and or F8 to access different repair options.  I used the Startup Repair, System Restore, as well as the bootrec /fixboot and bootrec /fixmbr commands.  They have worked to get the computer to start, however, when it came to a reboot I was at square one.  When you use the Startup Repair disk and HD, there would be a report that there are no startup issues or questions start had been repaired but sometimes it would start and sometimes it wouldn't.

  If the safe is a restart then most of the time it will restart correctly.  However if the computer is stopped for more than a minute it will not start.

  I now start the computer by using the ESC key at startup to the top and enter the boot menu. I then use the F4 key to reset the default start menu and the PC starts and works well. The start menu lists first, second HD DVD and the Real tek DXEB03 D00 as third. (Don't know what this is.)

  Any helps resolve this, so I don't have to reset the default start at each start menu would be appreciated.

  It is unlikely that a HP Recovery or repair of Windows will last if the hard drive has failed. If you buy a new hard drive, you can order a series of HP's HP recovery disks or a third party provider of third party. If please see "Software media and command pilot" page or contact HP Customer Support. to order a set of HP recovery disks. You can also buy the ComputerSurgeons.com recovery discs if you prefer.

  If you don't mind lose the use of all the factory installed HP softtware 'value-added', please visit "how to install Windows 7 without the disc" to get instructions on how to download Windows 7, create the installation media and install Windows 7 using the product key 25 character of the COA Microsoft on your computer.

  Please click the White Star of KUDOS to show your appreciation

• BlackBerry Smartphones very low performance after impossible to install the game (8310) necessary to reset the phone?

  Hello! Today, I tried to install a game using the Desktop Manager. I can see the icon in the menu, but does not (module not found) and the Desktop Manager does not see the game installed (or in options-advanced-applications)

  The problem is that now the phone has very low performance and I can barely use it, it's too slow.

  I think that the phone must be reset to the settings to factory or something.

  Can someone help me to do this?

  Thank you!

  Hello

  What I was doing to completely wipe my BB. I wrote this before and it printed.

  If your device does not work, perform a backup now if you have not already done save the file to a place and a name that you can easily locate it on computer.

  I then uninstalled DTM and then deleted all the other references to BB/Rim in Windows Explorer, thus eliminating the operating system for the BB to the computer in order to ensure that the version I want to reinstall a new version uploaded.

  Get the latest Desk Top software DTS)
  http://us.BlackBerry.com/apps-software/desktop/?CPID=OTC-DSKTPSW&CP=OTC-DSKTPSW

  and install it on the computer.

  Get the latest version of the operating system

  http://us.BlackBerry.com/support/downloads/download_sites.jsp

  and save it on computer.

  To erase all data on your BlackBerry device, follow these steps.

  (1) download JL_Cmder http://www.4shared.com/get/oqP9V-2Q/JL_Cmder_v19.html

  (2) install JL_Cmder to the computer.

  (3) double check you have already saved the BB. If you DO NOT, you will lose all data.

  (4) make sure that DTS is closed and plug in the BB to the computer via USB

  (5) to reach the JL_Cmder on your computer and double-click it to start. Now, it may take a few tries to connect, so persevering until he does.

  (6) on the first screen, press a key to continue.

  (7) now, if your device uses a password, enter it now. If not, press "N".

  8) press 4 to start CLEANING

  (9) press on 'Y' to continue

  (10) now type "blackberry" to continue

  (11) on the BB, you see a white screen with an error "507". Don't worry, that's what you want! You are now ready to install the operating system.

  Launch the new Desk Top software on the computer

  (1) on the homescreen of the BlackBerry® Desktop Software, click Device > update my device.

  (2) click on view the other Versions. Click the version of the new OS you previously downloaded.

  (3) click on install. The DTM will install the OS and then provide you with a list of applications to install. If you have had problems with an application, do not install it.

  Do not disconnect the device until the whole process is finished and restarted the device.

  After 10 minutes, restart again by removing the battery slot while tension and leave for a few minutes.

  Leave it again for 10 minutes. You should now have a fully functional BB!

• How to reset the configuration on esxi 5.1 which hangs at startup?

  Hi, I have a lab at home where I have an ESXi 5.1.0 host configured to turn on a virtual machine at startup of the host. The host starts and I'll see the DCUI for a few seconds before getting a purple screen crash. This started after I set up a virtual machine to use the pass through peripheral PCI. I found 2039030 which explains this bug KB. There is a patch, but as much as I know I can't apply it because the host crashes. Now, I'm a bit of a newb and was looking for ways to reset the configuration to prevent switch off when the host starts the virtual machine. I can't find a way to make this change. I tried the recovery of hypervisor mode during startup (Maj (R) but I get a warning saying there is no other hypervisors for restore. So is there a way I can either apply the hotfix to a host offline esxi (starting with a knoppix USB) or change a configuration so that vm does not automatically turn on, or if necessary just reset the entire configuration (again, by booting to a usb key)? Thank you!

  Probably the best way to reset the configuration in this case is to re - install ESXi. Make sure that you select "Install ESXi, VMFS datastore preserve" and - once installed and configured - register the virtual machine to inventory in click with the right button on their .vmx files in the data store Navigator.

  André

• How to reset the password forgot Windows user account

  I need Toshiba password reset! How can I reset Toshiba laptop? I know you if you help me Toshiba password recovery, etc. Well well, so often to address these issues in our lives. Today, we share a few ways to reset the password of Toshiba.

  Solution1: Toshiba recovery disks help reset lost password

  It only works if we have created the CD or recovery discs before that we have forgotten the password. The next appearing is the steps to reset the Toshiba Windows 7 recovery disk:
  a. start the PC, log on to Windows 7 and insert a USB flash drive in the driver.
  b. start-> Control Panel-> user accounts and of the safety of the family->-> create a user accounts password reset disk.
  c. in the Welcome screen click Next and select the inserted USB, click Next.
  d. Enter the password in the password field and click Next. When the progress indicator displays 100% complete, click Finish to exit. Remove the driver USB of PC.
  The method is similar to create a Toshiba restore CD. Now the password of Toshiba Windows 7 recovery disk is ok. Put it in a safe place for people can use to reset your password.
  Steps to recover the password with the created password reset disk Toshiba:
  e. click on reset password in Windows 7 logon window.
  f. Insert the USB Toshiba Recovery disk created in the USB driver interface, and then click Reset password' to open the password reset Wizard. Click next to continue.
  g. Choose this Toshiba USB drive recovery in the drop-down list. Click next to continue.
  h. enter a new password and re-enter a second time to confirm. Click next and finish to close the wizard.

  Option2: Reset Toshiba laptop for accounts with administrator rights

  If there is default or built-in Administrator account or other accounts with rights and administrator privileges, we can use it to Toshiba bypass password. Take example of Toshiba XP Recovery:
  System A. Boot mode safe mode by pressing F8 when PC stars.
  B. PC access by the available account with administrator rights and of privileges.
  C. start - users and groups lusrmgr.msc in the search ENTRY - local users and groups - box choose users.
  D. make a right-click the account with password unlocked, select set the password and enter and confirm the new password.

  Solution3: Toshiba Reset password with the ISO image file burn

  We can burn .iso on a bootable USB stick or a CD/DVD disc image file and reset the forgotten password quickly and easily. Take one of the most popular tool to reset the Windows Ainorsoft Windows Password Recovery password as an example:
  a. download the program from an accessible PC;
  b. burn the file .iso on a blank CD/DVD or USB drive.
  c. work around the lost password of Toshiba with the CD/DVD on the PC locked.

  Things will be difficult if we know the methods of Toshiba pass reset once we forgot password for Toshiba laptop! Be sure to share them with your friends!

  Thanks for sharing this, but we always talk about password of Toshiba, it won't and I think this might be a bit confusing, it is of a workaround for the windows user account password.

  As much as I know there is no password defined by Toshiba.

  The user can define the user account password in windows if necessary so that this workaround solution describes how to remove a user account Windows password that is common to all computers with the preinstalled Windows operating system.

  However, thanks for posting ;)

• I have to reset the charge cycle counter after replacing the battery?

  I had a defective power adapter, running on the number of cycles of load on my battery.  Thus, it no longer accepts a charge.  I have been running only on AC for over a year now, but finally decided to replace the battery.  What are the steps to reset the counter after replacing the battery?

  Replce just the battery, the battery will communicate the number of cycles to the computer. No adjustment is necessary.

• How to reset the BIOS to resolve a problem with Satellite P100 DVD burner

  Hello

  I'm trying to reset my cmos to solve a problem with my dvd writer.
  I tried to run an old game I own and which was protected by starforce and ran starforce nightmare with a made the device completely unusable.

  After much research, I heard to reset the cmos.
  I have treid through debugging and nothing happened. I really don't want to open the laptop and remove the cmos battery or leave it for a month until the battery runs.

  Y at - it advice on what I should do.

  Could you please put more details on the model of your laptop and you CD/DVD driver problem? This will be useful for other suggestions.

  To be honest I don t think any reset BIOS, the RCT battery remove, etc. is possible or could help you.
  Only the ASP would be able to remove the TCR battery (if necessary what I don t think), but would not reset the BIOS like on the desktop PC!

  I appreciate feedback

• Satellite L310-D4011: how to reset the DVD region to 0 setting?

  Dear all,

  I have a Satellite L310 D4011 I bought recently in which I installed a DVD playback software.
  I run Windows XP. One of my friends played a video clip of the United Kingdom (Mccartney Live at red square) in the DVD player and the original region setting that was 0 with 5 remaining changes, went to 4 changes remaining and the area is now set to 2. I am in India where the region for DVD is 5. If I change to 5, I lose another change option.

  I don't want to leave my DVD ROM stuck 0 left options and some other areas.

  Can someone give me advice to reset the region back with five remaining options - as it was when I bought the laptop?
  I'll be very grateful. The salesperson who I bought the laptop will be able to get back to factory setting?

  Best wishes

  Hello

  I think Toshiba has nothing to do with it. To protect the film industry and interests all laptop manufacturers offer optical disk drives where you can watch movies with country code but only 5 times. The last chosen region code will be set as default. So if you have more than 4 codes there is no reason to panic. Just continue to watch movies in your favorite area.

  I'm 100% sure that Toshiba service or the vendor where you bought your laptop will say that they have nothing to do with it. In drive properties you have set out to clear how it works.

  In any case, you can try to contact them and ask for help.

• Apple security cannot reset the Security Questions? Flaw Apple ID

  (I just got the phone with Apple security and I'm a bit puzzled and annoyed that they cannot 1) reset security of an account, or 2) purely and simply delete. Here's the scenario:

  (1) a person to the Viet Nam created an Apple ID, password, security questions, etc. by using the my mother gmail account. He is a perfect stranger, and they have no access to my mother gmail account so they can't check it out. I don't know when this has been done, but it is registered in the account of Apple.

  (2) I bought my mother its first product Apple, the iPad, we are in the Canada. I can't create an Apple ID, so I reset the password... I'm confused that this account should not exist. Reset the password successfully, and when I login, name, name, birthday are all foreigners. I have change the name, but I can't change the anniversary without answering the questions of security in Vietnamese. ???  I try to reset the security questions, and he again invites me to answer security questions I have not create nor I can read.

  (3) I call, the security team is unable to reset the security questions or delete. I went back and the Manager cannot do either, they get these guests, so she gives up and tells me to abandon ship and use a different email account or use iCloud. I don't want to use iCloud or a different e-mail address...

  So I wonder, how in the world is this possible? How a foreigner can sabotage someone's potential or future Apple ID? And why Apple cannot fill this gap?

  PS: Here is the reference. It makes no sense, I requested when I try to put security issues...

  If you forgot your Apple ID - Apple Support security questions answered.

  Wow! Bad luck!

  Out of curiosity... how far to the top of the scale grew? (I went actually 5 levels and fone 7 transfers once - a different matter, of course)

  The reason I ask is that you may have left speechless last specialist, but there may be another even more experienced. In the end, each Apple ID is simply a database record and CAN be obtained on the level of the "table" - that is, it looks like a worksheet where you can make anything happen at all if you have the permission of the "Save".

  EDITadded

  The latter is a ROYAL PAIN for Apple. They may believe that the problem is not worth and not say?

• W530 does not reset the widows 8

  Okies, I've never had a problem until recently. Windows 8 came with this machine, and I've had problems of performance for a month now. I just soldered on until yesterday when I continued to get different blue screens and need to reboot... now it won't restart, and so I did the press ENTER to reach the area of the HDD... selected the option of quick reset troubleshooting, has no, so I went back and selected the full reset and it gets to about 65% and stops wrote there is a mistake and requiring a reboot... it happened two time... now when it restarts, it tries to do a reset again... without asking him.

  Can someone give me a help here? Is this normal? Normally I physically break a computer and never get to the point where it is necessary to reset... so I'm really at a loss here.

  It of a W530 and has 16 GB of RAM. Everything I run/ran on it photoshop and Lightroom, Firefox, Audacity, Roxio, Avast Protection against virus, online backup service and a program called Star stacker.

  What happened on my computer if I remember correctly, it is that backup files to win 8 were never installed in the correct area. So when he's going to do a wipe and reinstall... he wiped... but not a reinstall. The fix was to return and have installed a new hard drive.

  ALSO if you have fingerprint reader and especially the color calibration tool installed. Make a note on the repair to confirm that those who work corectly before sending it back. If it is under warranty, they will replace all that appears worn or damaged. When the mine back, cover the keyboard has been replaced due to minor damage.

  The calibrator replacement that came on the new cover of keyboard needs information from the screen, which has not been properly attributed in the repair center, so my Stallion does not work either. In the end, after two trips to the repair center, I got a new screen, hard drive, keyboard, reader of fingerprints and monitor color... and thirteen new gray hairs. :-D

• Reset the PID.vi only once on the State transition

  Hello

  I'm controlling a fatigue gear using LabVIEW test bed and I use the PID.vi to control the hydraulic circuit. During the transition from the start as a test State, I need once the PID (the integrated error) values to be reset during the transition. The current configuration constantly resets the PID causing the hydraulic output voltage to be lower than the set value. I can't understand how to be set to Boolean false to pass true during the transition from the State and then back to false to prevent resets of the other by default. I have attached the current revision of my code.

  Thank you very much for your help!

  Trace

  It's a good idea, but it is not necessary to select blocks with the true and false as inputs, just equality by different and use the output directly to reset.

  Also, I see that you have PID blocks in two separate cases. Note that those will act independently from each other - if you reset into a State, then move to another State, it will not be reset. Maybe it's what you want, and maybe it isn't, but be sure to put multiple instances of the PID block that control the same in different cases. You can also see weird integral questions when you place in case, if a long time share when you run the same instance.

• Reset the read audio wave

  Hi all

  We are a group of students from DTU and we work with software defined radio in a 3 week course where we will be designing a radio station FM/receiver.
  We encountered a problem regarding resetting the position marker file in the sound file Read.vi. Our attempt must be a reset button which, once clicked resets the wave at 0 file marker so that the next reading occurs from the beginning of the audio file. We tried to use the absolute/relative position associated with a variety of ways to use the position of input and output offset offset, but with a bit of luck. The shift seems to be growing quickly or refuse to read the data when reset causing an underflow in our component of Tx.

  Any who would be able to provide a simple example to reset the sound file Read.vi, or is it necessary to launch a whole new instance/component?

  Thank you much in advance.

  
  

• (1) how to reset the task in view/default Access Manager? __2) how could it have been modified?-my firewall is off, too. I am concerned about safety.

  When I open the window (in Windows Vista) Task Manager, it shows that the "Applications" tab  I can access is more 'Processes', tab 'Performance' and 'Network'... this just started recently.
  (1) how to reset the task in view/default Access Manager?
  (2) how could it have been modified?-my firewall is off, too. I am concerned about safety.

  Double-click inside the border/edge to bring it back to the default view for Task Manager.

  Malware scan:

  Download, install, upgrade and scan with Malwarebytes to check / remove Malware/spyware.

  If necessary, do all of the above work Safe Mode with network.

   

  To get into Safe Mode with network, press F8 at the Power On / boot and use key arrow upward to get into SafeMode with networking from the list of options, and then press ENTER.

   

   

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that the Perform quick scan option is selected and then click on the Scan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button to view the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  See you soon. Mick Murphy - Microsoft partner

• Is there a way for me to reset the password on my laptop (I am the administrator, but I've changed my password and you forgot what I changed to).

  Is there a way for me to reset the password on my laptop (I am the administrator, but I've changed my password and you forgot what I changed to)?

  When I click on "reset password" it says to insert the removable disk or flash drive.  I put in a disk, and nothing happened.  I inserted a flash drive and the computer said that it could not do (or something).

  Hello

  You must make a password reset disk before you forgot your password, not then.

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-password-reset-disk

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  And this is the Information from Microsoft on the problems of passwords;

  You will need to borrow a Microsoft DVD from a friend, if you do not, as Recovery DVD a manufacturer does not have these particular options work.

  • http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  See you soon.

• Continuous network adapter reset the problem?

  Is there a replaceable NIC in the HP2000 specifications?

  Almost every time I want to use, I have to run this utility to reset the network adapter. My srtength of the router signal is a full 5 bars, but the connection drops every few minutes and then resets fine. I LOSE EVERYTHING I'M WORKING ON.

  I'm under Win8.1 and a QCA9565 of Qualcomm Atheros 802.11b/g/n WiFi Adapter.

  I tried to turn off the feature under power management and adding the network address in the advanced settings. No change has helped. I also installed the latest driver. In addition, it is wireless, so I disabled the Lan Realtek adapter.

  What is causing this problem reset? Please help me solve this problem, before my wife makes me resume...

  Hi Sparkles, thanks for your interest. I tried all your suggestions, before posting, and nothing helps.

  I, too, was working on behalf of HP for 36 years in R & D model workshop in Palo Alto.

  My grandson has suggested a usb wireless network adapter can work around the problem, and he did. I have an Asus router, so I got an Asus N - 10 usb wireless adapter. WIN8.1 was a tenacious installation; Asus wireless adapter is no longer compatible with operating systems more old (like me), but it seems to be a permanent solution for under $ $20. I stay logged in until I log out.