W530 does not reset the widows 8
Okies, I've never had a problem until recently. Windows 8 came with this machine, and I've had problems of performance for a month now. I just soldered on until yesterday when I continued to get different blue screens and need to reboot... now it won't restart, and so I did the press ENTER to reach the area of the HDD... selected the option of quick reset troubleshooting, has no, so I went back and selected the full reset and it gets to about 65% and stops wrote there is a mistake and requiring a reboot... it happened two time... now when it restarts, it tries to do a reset again... without asking him.
Can someone give me a help here? Is this normal? Normally I physically break a computer and never get to the point where it is necessary to reset... so I'm really at a loss here.
It of a W530 and has 16 GB of RAM. Everything I run/ran on it photoshop and Lightroom, Firefox, Audacity, Roxio, Avast Protection against virus, online backup service and a program called Star stacker.
What happened on my computer if I remember correctly, it is that backup files to win 8 were never installed in the correct area. So when he's going to do a wipe and reinstall... he wiped... but not a reinstall. The fix was to return and have installed a new hard drive.
ALSO if you have fingerprint reader and especially the color calibration tool installed. Make a note on the repair to confirm that those who work corectly before sending it back. If it is under warranty, they will replace all that appears worn or damaged. When the mine back, cover the keyboard has been replaced due to minor damage.
The calibrator replacement that came on the new cover of keyboard needs information from the screen, which has not been properly attributed in the repair center, so my Stallion does not work either. In the end, after two trips to the repair center, I got a new screen, hard drive, keyboard, reader of fingerprints and monitor color... and thirteen new gray hairs. :-D
Tags: ThinkPad Notebooks
Similar Questions
-
Set the style to null does not reset the attributes of police - Bug or feature?
I call setStyle ("police - fx - weight:" BOLD "") with a label - the label text is in bold.
Then I call setStyle (null) with the same label - now awaits the etiquette police returned to the definition of the CSS.
But: the label does not indicate a normal font now - it's always "BOLD".
I have to explicitly call setStyle ("police - fx - weight: normal") in order to bring it back to the normal font.
Is this a bug or a feature?
If it is a bug, so I'll post a message-Jira, but I'm still not 100% sure...
My FX version is 2.2.
Thanks + regards!
Björn
Code examples:package ztest; import javafx.application.Application; import javafx.event.ActionEvent; import javafx.event.EventHandler; import javafx.scene.Scene; import javafx.scene.SceneBuilder; import javafx.scene.control.Button; import javafx.scene.control.Label; import javafx.scene.layout.VBox; import javafx.stage.Stage; public class Test_62_FontStyle extends Application { public static void main(String[] args) { launch(args); } boolean m_bold = false; VBox m_vb = new VBox(); Label m_la = new Label("Some text to be styled."); Button m_bu = new Button("Change"); @Override public void start(Stage primaryStage) { final Scene scene = SceneBuilder.create() .root ( m_vb ) .build(); m_vb.getChildren().add(m_la); m_vb.getChildren().add(m_bu); m_bu.addEventHandler(ActionEvent.ACTION,new EventHandler<ActionEvent>() { @Override public void handle(ActionEvent paramT) { m_bold = !m_bold; if (m_bold == true) m_la.setStyle("-fx-font-weight: bold"); else m_la.setStyle(null); // does not reset font! // m_la.setStyle("-fx-font-weight: normal"); // this works fine... } }); primaryStage.setScene(scene); primaryStage.show(); } }
This is a known bug: setStyle (null) and setStyle("") does not cancel a previous call setStyle()
https://JavaFX-JIRA.Kenai.com/browse/RT-25002
-
How the plant does not reset the option works? -iPad
THEN I did a factory reset (delete all content and settings) and I was wondering, iCloud records on the device or it does not. How to factory reset thing work anyway?
The ' erase all content and settings ' will remove your content from the iPad (all the apps you have downloaded, music, movies, photos, etc.) and put all settings to their default values.
But if you have settings > iCloud > find my iPad set 'on' on the iPad, then he will not that iCloud account, you will need to enter this account and password to reactivate the iPad (find my iPhone Activation Lock - Apple Support)
-
My macbook pro retina boots to black screen. It does not reset the PRAM.
My MacBook Pro (15 "Early 2013) retina will have a black screen randomly. It won't restart and reset PRAM does not alter. To do this, the startup sound, but that's all. In addition, hang on to an external monitor does not display. Is there something else to try? It's a new OS (El Capitan).
Some things to consider: the battery can be 10%, 50%, 100% is not bad, the computer starts after being off for a long time (2-3 hours).
you have GPU failure
-
Reset button does not reset the color of the field.
Could not find the solution.
I have scripts that highlight the background color of the field, if the value is out of range. If the beach is OK, back color. It works very well.
When I reset the form (with button), field values zero OK, but the color of the field remains highlighted if this was the State.
Initially, the form opens with no highlighting. How to reset the form values and delete the highlighted?
Thank you
Wendell
I found the problem with your form...
(1) you must save your form as the form XML Dynamci. (File-> save as and choose dynamic rather than static).
(2) in the file-> properties of form tab by default, at the bottom, to make Format PDF, you chose, static XML form. Change it to dynamic XML form.
(3) in the same way under the Preview tab, you can change the dynamic static XML form.
Then, your form should work as expected.
Thank you
Srini
-
Reset WRE54G does not reset the password.
I tried several times to reset the WRE54G to factory settings, so I could connect with the password "admin", but it just keeps me reprompting the user name and password. Anyone know what's the deal? =/
It turns out that the problem was with the Google Chrome browser, for some reason any he kept me reprompting password. I open IE and it worked again. I guess there are still a few bugs in the new browser.
-
My homepage is set to yahoo, but mozilla opens with http://istart.webssearches.com as start page. Same reset does not solve the problem. I think that I have installed a software that installed this. My default search engine is Google. Kindly help me, is there something to do in all: config?
See this tutorial - http://malwaretips.com/blogs/istart-webssearches-com-removal/
-
Harger W530 AC does not match the Jack of the portable power
I just got my new W530, but I can't load it. Looks like 170W AC/DC charger is just, but somehow the physical connector does not match the power supply of the portable computer. Charger AC/DC 170W is not circular but with two small rectangles, however W530 is completely circular. Someone had the same problem? I try to return W530 that looks like it was made of bad sense but takes to always come back. any recommendations? Technical service told me since it is within 21 days after the delivery, I better return.
Technical service is great
But after the sale to get back really really bad!
It's quad-core, it requires 170W "brick" AC load, which has one taken not circular.
-
When you try to insert a digital signature, it does not accept the password I just reset for Adobe and will not let me. How can I determine what the password, it's who will give me access to insert the signature?
Hello
What is the error you get after inserting the password. Although there is no way to recover the password.
You can simply create a new digital ID with a new password.
Concerning
Sukrit diallo
-
My acer aspire one does not start. the scrolling windows screen, then screen turns off. but after a long time (45mins) the login screen appears and d sysytem restarts. I have a multi boot with 2 installations of xp, and this happens with both bones. not able to access my sys to bak - up also. all f8 options were considered, but no use.
I have some bad sectors on d: (have total 3 drive partitions c:, d:, e: with xp on c: and e :))the sys wud show a blue screen and reboot when certain file wud b accessible on d:... now the sys cannot start all... pls help...Hi Srimotu,
· You get an error message or an error code?
· Have you made changes on the computer before this problem?
Follow these methods.
Method 1: Try starting it in last known good configuration.
http://support.Microsoft.com/kb/307852
Method 2: Try to start in safe mode.
http://support.Microsoft.com/kb/315222
If you are able to boot into safe mode, try a clean boot.
http://support.Microsoft.com/kb/310353
Note: After the clean boot for troubleshooting, return the computer to a Normal startupmode.
Method 3: Disconnect external devices such as printer, scanner, etc. and try to start.
Also disable automatic restart in the event of system failure
-
Time Machine (on Mac) does not detect the airport Time Capsule
Originally posted on the page of the airport, but seems to be the better question for this group. Sorry for the double post
Looking for advice on how to get the Time Machine utility for access to my Time Capsule. I use an iMac in late 2012 with MAC OS 10.12 TimeCapsule is 2015 7.7.7 running latest firmware. Airport utility is the latest firmware 6.3.7.
When I run the application Time Machine, Time Capsule is not detected. I tried the two WiFi and with cables connected Ethernet (not tried USB yet) and my Time Capsule doesn't have a lightning bolt or firewire ports.
Open Airport utility & see the airport time capsule. I can see all connected devices, including the MAC, but no prompt activation Time Machine on the Time Capsule.
I recently used TM on this iMac with a G-Technology drive. It auto detects the time machine and executes a back up. But airport Time Capsule will not.
Any suggestions?
Sierra has been problematic with the TC.
1. make sure you don't have any charge virus protection software. In fact, I would say that disable all software 3rd part at the moment.
2. make sure that you can actually write to disk of TC.
Attach the TC disc in the finder and copy a file on disk, you can delete it later... It's just to ensure that you have full write permission. If it does not for the most part, you won't be able to use Time Machine... If you can then try TM immediately...
Just to be clear, the TC is a network device. You have tested with ethernet and wireless... Ok.. They are only suitable methods. You cannot use USB. And clearly, TC has never had nor will never be ports Firewire or lightning.
3. no chance that a reset complete TC. This will not delete the files on the hard drive, but you must make sure that the device is configured on the current computer.
4. There are many positions in these days... read through them and do some research. Sierra is a bleeding edge new... So wait you to spend a lot of the precious liquid if you choose to be an early adopt.
-
IPhone does not accept the code to check for text messages
II phone does not accept the code verification for the transfer of messages text imac
Maybe these articles will help:
Get a verification code and connect with authentication to two factors - Apple Support
If you don't receive your check or reset email - Apple Support
If this is not the case, can you explain a little more detail what exactly is your problem? Or see the 'Contact us' at the bottom of the second article.
-
My Firefox has just automatically updated itself to the version 42. The extention under modules page does not display the extensions I have installed. The plug in page shows the plug ins I installed. How can I fix it? This happened on my 64 bit Windows 7 partition. I installed the extension "classic add-on" to see if she could solve the problem. There is unfortunately no. I have a screenshot. I'm not sure if I have permission to upload it to the media gallery. I also use Linux, but I did not upgrade that are still there.
It is possible that there is a problem with the files that store the registry extensions.
Delete the files (extensions.json, extensions.sqlite, extensions.ini) extensions.* and compatibility.ini in the profile folder of Firefox to reset the extensions registry.
New files will be created if necessary.
See "extension corrupted files:
-
Why my master password does not meet the correct password, in that I get
After you set up a master password in security settings constantly, he asked for it, but when I get in there it does not recognize the password. I wrote it down in order to avoid this problem. I don't know that it is the only one I chose. try again again and again did not help.
Please help me. What do you think is the best way to solve this problem?Hello
Refresh (called "Reset" in older versions of Firefox) can solve a lot of problems in restaurant Firefox as his default factory while saving your bookmarks, history, passwords, cookies, and other essential information.
Note: When you use this feature, you will lose all the extensions, toolbar customizations, and certain preferences. See article Firefox Refresh - reset modules and parameters for more information.
Refresh for Firefox:
- Open the troubleshooting information page using one of the following methods:
- Click the menu button
click Help
and select troubleshooting information. Should open a new tab containing your troubleshooting information.
- If you are unable to access the Help menu, type Subject: support in your address bar to bring up the troubleshooting information page.
- Click the menu button
- At the top right of the page, you should see a button that says 'Refresh Firefox' ('reset Firefox' in older versions of Firefox). Click on it.
- Firefox closes. Once the update process is complete, Firefox will display a window with the imported information.
- Click Finish and reopen Firefox.
This corrects the problem? Please report to us!
Thank you.
- Open the troubleshooting information page using one of the following methods:
Maybe you are looking for
-
When I try to open Firefox, I get this message:"Firefox is already running but is not responding. The old process of Firefox must be closed to open a new window. »I then clicked close firefox, but the problem was solved not so I uninstalled and reins
-
If I use the master password to access the sites, all my passwords are encrypted?
I'm new to this approach to security and just trying to verify the level of security.
-
HP Elitebook 8740w: validity and windows 10 fingerprint sensor: does not
Dear all, I come to you today because I have already tried many (perhaps all) of the suggested solutions posted on this forum. Unfortunately, I could never get a correct installation, work. After upgrading to windows 10 (automatic update of windows -
-
Hello. After two days on a tray to solve the problem, I need your help. I have problem with presentation of the data. Data of growning Aproxx. linear. I read these data from device. Sometimes my .vi does not read data, and in this case my chart have
-
Try to add the new user account
I had three user account and I deleted an a TI won't let me add more. I can use my guest account annd. He wants to let me log in if I do createpne