Interface intra

Similar Questions

• RV320 Hairpin (intra-interface)

  I use the RV320 router soon and I'm putting all the services I need. This router uses 2 networks, one with the public, the second IP address with the IP address of the provider network. All local network to the internet traffic going to more non-public (WAN2, the provider's IP) and IP address public (WAN1) is planned for remote access to the network local and several VPN services.

  I added a DNS record in the administration of the area, so anyone on the internet by typing 'remote.mydomain.xy' is redirected to WAN1 IP address where appears the login page of the router or NAS.

  When I type "remote.mydomain.xy" in LAN, the request is exceeded.

  As I have found, this feature is called crossed. I tried to google any solution, but they are all more or less away from my router configuration.

  It is the same for other services. They are accessible from outside the network, but does not not within LAN. I have to manually set the local IP address of the device with the service running and leaving the office, I come to the public IP or remote.mydomain.xy

  Is there a simple way how the hairpin on the router function?

  I tried to put it in the rules on access to the firewall, but without success. I think it must have something in common with the Firewall setting as the PIN seems to work when the firewall is disabled.

  Miroslav,

  Remove the transmission and access rules that point 443 and 8080 to 192.168.1.1. Port forwarding is not required for managing remote and the firewall can not redirect traffic to the WAN, only the LAN port. Nothing should never be sent to 192.168.1.1.

  If the grouping is still intermittently after the removal of these rules, save the configuration of RV320 and reset it to the factory settings. Connect to 1 WAN and enable management remotely on 433. Try to reach the web UI to https:// and see if it is still intermittent.

  -Marty

• VPN hairpin on the OUTSIDE interface

  Hairping VPN on the OUTSIDE interface

  What I currently have is SSL Anyconnect VPN connections to the ASA that works very well.

  I want all networks through the ASA-tunnel.

  All web connections will be donated to the ASA and hennard back to the interface from the OUTSIDE to get web access.

  I have a static route on the ASA for setting up VPN

  Route outside 0.0.0.0 0.0.0.0 PUBLIC_IP>

  NAT exemption is in place for the creation of VPN

  NAT (INSIDE, OUTSIDE) static source any destination of all public static VPN_POOL_OG VPN_POOL_OG

  What I need is the configuration to create the VPN PIN for internet traffic.

  Any help is greatly appeciated.

  

  Hi Thomas,

  You need the following:

  1)

  permit same-security-traffic intra-interface

  2)

  Pool = 192.168.3.0/24 VPN

  object obj-vpnpool network

  subnet 192.168.3.0 255.255.255.0

  dynamic NAT interface (outdoors, outdoor)

  !

  Please let me know

  The rate of any position that you be useful.

• RA VPN doesn't work is not on the second external interface

  I've temporarily came from two Internet service providers in our ASA 5510.  Which works very well.  I tried to configure the VPN to our second outside interface (outside-XO) and who does not.  The first/original VPN works great.  Can someone look at the config and tell me if I did something wrong.  It is not a customer number, because it is able to connect fine on the first interface.  Thank you.

  ASA Version 7.1 (2)
  !
  hostname FW01
  dot.com domain name
  activate the password * encrypted
  names of
  !
  interface Ethernet0/0
  nameif outside
  security-level 0
  IP address *.229.200 255.255.255.192
  !
  interface Ethernet0/1
  Speed 100
  full duplex
  nameif inside
  security-level 100
  IP 192.168.2.3 address 255.255.255.0
  !
  interface Ethernet0/2
  nameif outside-XO
  security-level 0
  IP address *.157.100 255.255.255.192
  !
  interface Management0/0
  nameif management
  security-level 100
  IP 192.168.14.254 255.255.255.0
  management only
  !
  passwd * encrypted
  banner login attention is a private network. Unauthorized intruders will BE prosecuted to the extent of the ACT!
  boot system Disk0: / asa712 - k8.bin
  passive FTP mode
  clock timezone PST - 8
  clock summer-time recurring PDT 2 Sun Mar 2:00 1 Sun Nov 02:00
  DNS server-group DefaultDNS
  dot.com domain name
  permit same-security-traffic intra-interface
  object-group service tcp Server
  HTTPS and www description
  EQ object of the https port
  port-object eq www
  object-group service tcp Mail
  SMTP POP3 access description
  EQ Port pop3 object
  EQ smtp port object
  port-object eq 32000
  non-standard tcp service object-group
  Port Description 1429 and 1431
  port-object eq 1431
  port-object eq 1429
  object-group service DNS tcp - udp
  Description to allow outside DNS resolution
  area of port-object eq
  object-group service FTP tcp
  FTP description
  port-object eq ftp
  SMTPMail tcp service object-group
  Description SMTP only access
  EQ smtp port object
  IQWebServer tcp service object-group
  Www and port 8082 description access
  port-object eq www
  EQ object Port 8082
  EQ object of the https port
  port-object eq 8999
  SFTP tcp service object-group
  Description SFTP_SSH
  EQ port ssh object
  outside_access_in list extended access permit tcp any host *. *.229.201 - a group of Web server objects
  outside_access_in list extended access permit tcp any host *. *.229.202 object-group Mail
  outside_access_in list extended access permit tcp any host *. *.229.202 - a group of Web server objects
  outside_access_in list extended access permit tcp any host *. *.229.202 object-group DNS
  outside_access_in list extended access permit tcp any host *. *.229.203 - group of non-standard items
  outside_access_in list extended access permit tcp any host *. *.229.204 - a group of Web server objects
  outside_access_in list extended access permit tcp any host *. *.229.205 - group of non-standard items
  outside_access_in list extended access permit tcp any host *. *.229.208 - a group of Web server objects
  outside_access_in list extended access permit tcp any host *. *.157.101 - a group of Web server objects
  outside_access_in list extended access permit tcp any host *. *.157.102 object-group Mail
  outside_access_in list extended access permit tcp any host *. *.157.102 - a group of Web server objects
  outside_access_in list extended access permit tcp any host *. *.157.102 object-group DNS
  outside_access_in list extended access permit tcp any host *. *.157.103 - group of non-standard items
  outside_access_in list extended access permit tcp any host *. *.157.104 - a group of Web server objects
  outside_access_in list extended access permit tcp any host *. *.157.105 - group of non-standard items
  outside_access_in list extended access permit tcp any host *. *.157.108 - a group of Web server objects
  access-list 150 extended permit tcp any any eq smtp
  access-list sheep extended ip 192.168.0.0 allow 255.255.0.0 10.1.1.0 255.255.255.0
  access-list sheep extended permits all ip 10.1.1.0 255.255.255.240
  Splt_tnl list standard access allowed 192.168.0.0 255.255.0.0
  Splt_tnl list standard access allowed 10.1.1.0 255.255.255.0
  access-list extended webcap permit tcp any host *. * eq.164.210 smtp
  access-list extended webcap permit tcp host * smtp eq.164.210 all
  pager lines 24
  Enable logging
  logging asdm-buffer-size 200
  buffered logging critical
  exploitation forest asdm errors
  Outside 1500 MTU
  Within 1500 MTU
  management of MTU 1500
  outside-XO MTU 1500
  mask 10.1.1.1 - 10.1.1.15 255.255.255.0 IP local pool VPNpool
  mask 192.168.14.244 - 192.168.14.253 255.255.255.0 IP local pool VPNCisco
  ICMP allow any inside
  ASDM image disk0: / asdm512.bin
  enable ASDM history
  ARP timeout 14400
  Global (outside) 1 *. *.229.194
  Global (outside-XO) 1 *. *. 157.66
  NAT (inside) 0 access-list sheep
  NAT (inside) 1 192.168.0.0 255.255.0.0
  public static tcp (indoor, outdoor) * domaine.229.202 192.168.14.166 netmask 255.255.255.255 area
  public static tcp (indoor, outdoor) *.229.202 www 192.168.14.2 www netmask 255.255.255.255
  public static tcp (indoor, outdoor) *.229.202 smtp smtp 192.168.14.2 mask 255.255.255.255 subnet
  public static tcp (indoor, outdoor) *.229.202 192.168.14.2 pop3 pop3 netmask 255.255.255.255
  public static tcp (indoor, outdoor) *.229.202 32000 192.168.14.2 32000 netmask 255.255.255.255
  static (inside, outside) *. * 192.168.14.6.229.203 netmask 255.255.255.255
  static (inside, outside) *. * 192.168.14.28.229.204 netmask 255.255.255.255
  static (inside, outside) *. * 192.168.14.205.229.205 netmask 255.255.255.255
  static (inside, outside) *. * 192.168.14.29.229.208 netmask 255.255.255.255
  static (inside, outside) *. * 192.168.14.3.229.201 netmask 255.255.255.255
  TCP static (inside, outside-XO) *. * domaine.157.102 192.168.14.166 netmask 255.255.255.255 area
  TCP static (inside, outside-XO) *. *.157.102 www 192.168.14.2 www netmask 255.255.255.255
  TCP static (inside, outside-XO) *. *.157.102 smtp smtp 192.168.14.2 mask 255.255.255.255 subnet
  TCP static (inside, outside-XO) *. *.157.102 192.168.14.2 pop3 pop3 netmask 255.255.255.255
  TCP static (inside, outside-XO) *. *.157.102 32000 192.168.14.2 32000 netmask 255.255.255.255
  static (inside, outside-XO) *. * 192.168.14.3.157.101 netmask 255.255.255.255
  static (inside, outside-XO) *. * 192.168.14.6.157.103 netmask 255.255.255.255
  static (inside, outside-XO) *. * 192.168.14.28.157.104 netmask 255.255.255.255
  static (inside, outside-XO) *. * 192.168.14.205.157.105 netmask 255.255.255.255
  static (inside, outside-XO) *. * 192.168.14.29.157.108 netmask 255.255.255.255
  Access-group outside_access_in in interface outside
  Access-group outside_access_in in interface outside-XO
  Route outside 0.0.0.0 0.0.0.0 *. * 1.229.193
  Route inside 192.168.0.0 255.255.0.0 192.168.2.1 1
  Route outside-XO 0.0.0.0 0.0.0.0 *. * 2.157.65
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00
  Timeout mgcp-pat 0:05:00 sip 0:30:00 sip_media 0:02:00
  Timeout, uauth 0:05:00 absolute
  attributes of Group Policy DfltGrpPolicy
  No banner
  WINS server no
  DNS server no
  DHCP-network-scope no
  VPN-access-hour no
  VPN - connections 3
  VPN-idle-timeout 480
  VPN-session-timeout no
  VPN-filter no
  Protocol-tunnel-VPN IPSec
  disable the password-storage
  disable the IP-comp
  Re-xauth disable
  Group-lock no
  disable the PFS
  IPSec-udp disable
  IPSec-udp-port 10000
  Split-tunnel-policy tunnelall
  Split-tunnel-network-list no
  by default no
  Split-dns no
  disable secure authentication unit
  disable authentication of the user
  user-authentication-idle-timeout 30
  disable the IP-phone-bypass
  disable the leap-bypass
  disable the NEM
  Dungeon-client-config backup servers
  the firewall client no
  rule of access-client-none
  WebVPN
  url-entry functions
  HTML-content-filter none
  Home page no
  4 Keep-alive-ignore
  gzip http-comp
  no filter
  list of URLS no
  value of customization DfltCustomization
  port - forward, no
  port-forward-name value access to applications
  SSO-Server no
  value of deny message connection succeeded, but because some criteria have not been met, or because of a specific group policy, you are not allowed to use the VPN features. Contact your administrator for more information
  SVC no
  SVC Dungeon-Installer installed
  SVC keepalive no
  generate a new key SVC time no
  method to generate a new key of SVC no
  client of dpd-interval SVC no
  dpd-interval SVC bridge no
  deflate compression of SVC
  Cisco strategy of Group internal
  Cisco group policy attributes
  value of server WINS 192.168.14.4 192.168.14.11
  value of 192.168.14.4 DNS server 192.168.14.11
  Split-tunnel-policy tunnelspecified
  value of Split-tunnel-network-list Splt_tnl
  field default value *.com
  username * password * encrypted
  username * password * encrypted privilege 0
  username * password * encrypted
  username * password * encrypted
  username * password * encrypted
  username * password * encrypted privilege 15
  username * password * encrypted privilege 15
  the ssh LOCAL console AAA authentication
  Enable http server
  http 0.0.0.0 0.0.0.0 outdoors
  http 192.168.0.0 255.255.0.0 inside
  http 192.168.1.0 255.255.255.0 management
  http 192.168.14.0 255.255.255.0 management
  http 0.0.0.0 0.0.0.0 outside-XO
  SNMP-server host within the public 192.168.14.27 of the community
  location of the SNMP server *.
  contact SNMP Network Admin Server
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  Crypto-map dynamic outside_dyn_map 20 the value transform-set ESP-3DES-SHA
  dynamic-map of crypto-XO_dyn_map 10 outside the value transform-set ESP-3DES-SHA
  map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map
  outside_map interface card crypto outside
  outside-XO_map 65535 ipsec-isakmp crypto map outside Dynamics-XO_dyn_map
  card crypto outside-XO_map interface outside-XO
  ISAKMP allows outside
  ISAKMP enable outside-XO
  part of pre authentication ISAKMP policy 10
  ISAKMP policy 10 3des encryption
  ISAKMP policy 10 sha hash
  10 2 ISAKMP policy group
  ISAKMP life duration strategy 10 86400
  ISAKMP nat-traversal 20
  IPSec-attributes tunnel-group DefaultL2LGroup
  ISAKMP keepalive retry threshold 600 10
  IPSec-attributes tunnel-group DefaultRAGroup
  ISAKMP keepalive retry threshold 600 10
  tunnel-group, type Cisco ipsec-ra
  attributes global-tunnel-group Cisco
  address pool VPNpool
  Group Policy - by default-Cisco
  tunnel-group Cisco ipsec-attributes
  pre-shared-key *.
  ISAKMP keepalive retry threshold 600 10
  Telnet 192.168.0.0 255.255.0.0 inside
  Telnet 192.168.14.109 255.255.255.255 inside
  Telnet 192.168.14.36 255.255.255.255 inside
  Telnet timeout 5
  SSH 0.0.0.0 0.0.0.0 inside
  SSH timeout 5
  Console timeout 10
  management-access inside
  dhcpd lease 3600
  dhcpd ping_timeout 50
  !
  INSPECT class-map
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  Policy-map global_policy
  class INSPECT
  inspect the dns
  inspect the http
  inspect the icmp
  inspect the tftp
  inspect the ftp
  inspect the h323 ras
  inspect h323 h225
  inspect the snmp
  inspect the sip
  inspect esmtp
  class inspection_default
  inspect the ftp
  !
  global service-policy global_policy
  TFTP server inside 192.168.14.21 TFTP-root /.
  192.168.14.2 SMTP server
  Cryptochecksum:5eedeb06395378ed1c308a70d253c1b6
  : end

  Hello

  Should work.

  What I think is the routes:

  Route outside 0.0.0.0 0.0.0.0 *. * 1.229.193
  Route outside-XO 0.0.0.0 0.0.0.0 *. * 2.157.65

  If the first interface is ok, the ASA does not go to route packets via the second interface, so VPN will be not through this interface.

  On the client, can you PING the two IPs outside of ASA or only the first?

  Try to add a static route on the SAA to secondary education outside interface pointing to the address of the customer and try to connect via VPN and see if it works.

  Orders:

  HS cry isa his

  HS cry ips its

  Will be a big help as well, when the VPN connection attempt failed.

  Federico.

• A VPN client can go same interface on the Pix 515

  A user in a Pix VPN and get an address x.x.x.x via an ippool on the Pix. Once this is done, they will need access to information on the public network. Is it possible since they come out of the same interface?

  I can open ports and route subnets on our core routers, but that doesn't seem to work.

  Thank you

  Dwane

  Hi elodie

  You can do this by entering the following command

  permit same-security-traffic intra-interface

  Concerning

• SSL vpn, single interface acting as outside/inside

  Hi all

  I'm trying to implement a VPN SSL (not without customer) with a cisco ASA 5510, but I'm a bit stuck since for testing the vpn will be in the same subnet as the destination to reach and so there is only a single interfaces connected to the network that would deal with internal and external traffic. I have attached a diagram of what I'm trying to do and the configuration of my ASA, hope this would be useful.

  The entire network is for historical reasons on routed public ip addresses. There are ACL to block traffic from the internet on the workstation on our network that is 8.8.36.0/24.

  As I am not responsible for management of this network, I would like to test vpn in several steps.

  (1) the first step is to test this vpn from inside to inside

  (2) second step would be to test this vpn from outside the internet inside network

  (3) and the final step would be to put this vpn in one vlan separate

  For the first step, I tried to connect to the vpn with the anyconnect client server, no problem with the creation of vpn, and I correctly get an ip address from the pool (for example: 8.8.36.181) but I can't contact the internal workstation on the 8.8.36.0/24 network.

  I' I'm sure I'm missing something in the configuration, it would be possible to help me?

  Thanks in advance,

  1. Please use a different subnet as pool other than your network vpn client internal 8.8.36/24

  2. given that traffic will turn back on ASA, you need the following command.

  permit same-security-traffic intra-interface

• MULTIPLE ADDRESSES ON THE EXTERNAL INTERFACE IP

  Hi all

  We put in place a number of ASAs for use with corporate VPN. When remote users connect using anyconnect they can hairpin on the Internet from Headquarters and must assign a public IP address for this purpose. To avoid people getting the same public address every time they go to the internet, we want to set up a pool of public addresses which will be awarded at random to the user of the VPN. Also, for their incoming connection requests, we have a ddns that solves a unique ip address for incoming connections. So, in summary clients connect to a single IP address on our ASAs, then hairpin at the internet and receive a public IP address from a pool. Look at us a few options to do so, but would appreciate any suggestions as to how best to achieve this goal.

  Thank you

  Hello

  It seems to me that the order of the chosen one NAT IP address of the NAT pool is random. I tested on my home with a pool of public addresses small ASA5505.

  I don't know if there is difference between different levels of Software ASA or rather the NAT configuration format. Since the 8.2 (and below) and 8.3 format (and more recent) is completely different.

  If we guess you configure NAT pool for VPN Client users connected to the ASA then configurations need you so

  Software of 8.3 and above

  permit same-security-traffic intra-interface

  object-group, network VPN-POOL

  Description the user VPN address Pools

  object-network 10.10.10.0 255.255.255.128

  object-network 10.10.20.0 255.255.255.128

  network of the PUBLIC-POOL object

  1.1.1.1 range 1.1.1.254

  interface of VPN-POOL PUBLIC POOL dynamic NAT (outside, outside) after auto source

  8.2 software and below

  permit same-security-traffic intra-interface

  NAT (outside) 200 10.10.10.0 255.255.255.0

  NAT (outside) 200 10.10.20.0 255.255.255.0

  Global 1.1.1.1 - 1.1.1.254 200 (outside)

  Global 200 (external) interface

  I don't know what is the amount of your user, but I guess you don't such a pool of important public addresses for users. The configurations above also contain a dynamic PAT when the NAT pool runs out.

  Is that what you're looking for?

  Hope this helps

  -Jouni

• ASA "route inside 0 0 192.168.1.1 by tunnel" interface ACL question

  Hello

  Small question around the road inside 0.0.0.0 0.0.0.0 192.168.1.2 in tunnel command.

  Do you need to add a u-turn traffic within the ACL interfaces (for example internet related http traffic) or 'same-security-traffic permit intra-interface' negates the need of this?

  So if my site remote vpn outside is 10.1.1.0/24 should I add entering permitted statements for the 10.1.1.0/24 inside my interface.

  Thank you

  same-security-traffic permit intra-interface allows then-input-output traffic on a single interface

  allowed incoming 10.1.1.0/24 statement in the list ACL allows traffic (output - then-) penetration on a single interface, but you must disable the RPF check

• VPN connected but unable to reach other interfaces

  I have installation of remote access vpn and I can connect without any problems. I assigned the vpn a pool of addresses at the end of my home subnet of the interface. When it is connected I can ping any device on that subnet, I can also connect to my passage on the same subnet via my browser. I can't access however all devices located in my DMZ when logged in. This is a new configuration, I tested, but I need the vpn user to use rdp to connect to machines in the DMZ. I enclose my config that any advice would be greatly appreciated.

  Output from the command: 'show running-config '.

  : Saved

  :

  ASA Version 8.2 (1)

  !

  hostname ASA1

  domain name

  activate the encrypted password

  2KFQnbNIdI.2KYOU encrypted passwd

  names of

  name 10.10.10.3

  name 10.10.10.4

  name 10.10.10.5

  name 10.10.10.6

  name 10.10.10.7

  name 10.10.10.8

  !

  interface Ethernet0/0

  nameif outside

  security-level 0

  address IP 38. ***. ***. 2 255.255.255.0

  !

  interface Ethernet0/1

  nameif inside

  security-level 100

  IP 192.1.168.1 255.255.255.0

  !

  interface Ethernet0/2

  nameif DMZ

  security-level 50

  IP 10.10.10.1 255.255.255.0

  !

  interface Ethernet0/3

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface Management0/0

  nameif management

  security-level 100

  IP 192.168.1.1 255.255.255.0

  management only

  !

  passive FTP mode

  DNS domain-lookup outside

  DNS lookup field inside

  DNS domain-lookup DMZ

  DNS server-group DefaultDNS

  Server name *. 28.0.45

  Server name *. 28.0.61

  domain name

  permit same-security-traffic inter-interface

  permit same-security-traffic intra-interface

  Outside_access_in list extended access permit tcp any host 38. ***. ***. 5 eq 3389

  access allowed extensive list icmp a whole

  Access extensive list ip 192.1.168.0 Outside_nat0_outbound allow 255.255.255.0 192.1.168.240 255.255.255.240

  Outside_nat0_outbound to access extended list ip 10.10.10.0 allow 255.255.255.0 192.1.168.240 255.255.255.240

  Fruitionvpn_splitTunnelAcl_2 list standard access allowed 10.10.10.0 255.255.255.0

  Standard access list Fruitionvpn_splitTunnelAcl_2 allow 192.1.168.0 255.255.255.0

  Standard access list Fruitionvpn_splitTunnelAcl_2 allow 38.101.248.0 255.255.255.0

  Access extensive list ip 192.1.168.0 Inside_nat0_outbound allow 255.255.255.0 192.1.168.240 255.255.255.240

  Allow Outside_nat0_outbound_1 to access ip 38 extended list. ***. ***. 0 255.255.255.0 192.1.168.240 255.255.255.240

  pager lines 24

  Enable logging

  asdm of logging of information

  Outside 1500 MTU

  Within 1500 MTU

  MTU 1500 DMZ

  management of MTU 1500

  192.1.168.240 - 192.1.168.254 vpn IP local pool

  ICMP unreachable rate-limit 1 burst-size 1

  don't allow no asdm history

  ARP timeout 14400

  NAT-control

  Overall (101 outside interface)

  Global (DMZ) 2 10.10.10.2 - 10.10.10.254 netmask 255.255.255.0

  NAT (outside) 0-list of access Outside_nat0_outbound

  NAT (0 Outside_nat0_outbound_1 list of outdoor outdoor access)

  NAT (inside) 0-list of access Inside_nat0_outbound

  NAT (inside) 101 192.1.168.0 255.255.255.0

  NAT (DMZ) 101 10.10.10.0 255.255.255.0

  static (DMZ, outside) 38. ***. ***. 5 Webserver2 netmask 255.255.255.255

  Access-group Outside_access_in in interface outside

  Route outside 0.0.0.0 0.0.0.0 38. ***. ***. 1 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  dynamic-access-policy-registration DfltAccessPolicy

  Enable http server

  http 192.168.1.0 255.255.255.0 management

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  management_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  crypto management_map interface card management

  card crypto DMZ_map 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  card crypto DMZ_map DMZ interface

  card crypto Inside_map 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  Inside_map interface card crypto inside

  card crypto Outside_map 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  Outside_map interface card crypto outside

  crypto ISAKMP allow outside

  crypto ISAKMP allow inside

  crypto ISAKMP enable DMZ

  activate the crypto isakmp management

  crypto ISAKMP policy 10

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  Telnet timeout 5

  SSH timeout 5

  Console timeout 0

  dhcpd address 192.1.168.3 - 192.1.168.254 inside

  !

  management of 192.168.1.2 - dhcpd address 192.168.1.254

  enable dhcpd management

  !

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  internal Fruitionvpn group strategy

  attributes of Group Policy Fruitionvpn

  value of 66.28.0.45 DNS server 66.28.0.61

  Protocol-tunnel-VPN IPSec

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list Fruitionvpn_splitTunnelAcl_2

  fruition of value by default-field

  username privilege 15 encrypted password y4A2QiB9t5hlOCGW ksuber

  username ksuber attributes

  VPN-group-policy Fruitionvpn

  type tunnel-group Fruitionvpn remote access

  attributes global-tunnel-group Fruitionvpn

  vpn address pool

  Group Policy - by default-Fruitionvpn

  IPSec-attributes tunnel-group Fruitionvpn

  pre-shared-key *.

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect esmtp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  !

  global service-policy global_policy

  context of prompt hostname

  Cryptochecksum:a5ec2459f53c4f1fa34d267a6903bea9

  : end

  a few suggestions

  1. use a network address in a different subnet within the network for the client vpn IP pool. saying 192.168.10.0/24

  2. enable nat 0 on dmz interface

  no_nat_dmz 10.10.10.0 ip access list allow 255.255.255.0 192.168.10.0 255.255.255.0

  NAT (DMZ) 0-list of access no_nat_dmz

• New Audio USB Interface lose sound on El Capitan

  Hi all!

  A few weeks ago that I upgraded my MacBook Pro retina 15 "end 2013 to El Capitan, after that my USB Audio Interfaces (Focusrite Scarlett 2i4) and Safire 6 USB stopped working properly. Both work correctly when they are connected to an iMac 5K running the same operating system.

  I can listen to Audio for some time (about 10-2 Minutes, it is always different), when the Audio starts to crush und get outs, after a certain time there is only silence "click on" come out of the speakers.

  Heres an Audio file of the sound that results from: https://www.dropbox.com/s/5nb96bmdh47kmi2/20160923%20141619.m4a?dl=0

  I already tried to reinstall OS X (starting with CMD R and reinstall OS), reset PRAM and SMC. Nothing has changed the question. Any ideas where it comes from?

  Greetings

  Chris

  It is most likely a software conflict. Note the time at which audio is running out. Open the Console and look for accidents or mistakes at this time.

  The reason why it crashes on a mac, but not the others most likely is related to differences in software installed. Run Etrecheck on touch mac and post the report here.

• The interface usb audio of Behringer U-Phoria UMC404HD work with Garageband?

  I just got an interface USB 4 channels for recording guitars and microphones. It has no driver, but instead uses the Mac OS. I implemented the sound control panel to recognize the device input and output, can I use the Audio configuration utility and MIDI to fit a recording at 192000HZ.

  My problem is that as soon as I open GarageBand 192000HZ setting falls down to it is more low 44100 HZ. It is a flaw with the audio interface Behringer or is it a problem of system software?

  I will mix Behringer messages on this problem, a guy says that the interface has a bad component castigates other Garageband.

  I would appreciate hearing from anyone with any interface from Behringer, who used it to 192000HZ using Garageband.  Any other comments welcome.

  

  

  I have this problem on 3 different computers using systems to a new installation of 10.11 10.6.8. A few different USB cables. More recently, on an I7 Mini with memory 16 concerts with 10.11.6. Currently on Garageband 10, but the same problem with Garageband 6

  I talked to an Apple technician and the answer is that Apple has "capped" sampling in 441000HZ setting.

  Thus, in spite of the box is designed to accept 192000Hz sampling, apparently GarageBand has been paralyzed for a lower sampling only to the adjustment system. Another program audio I, Amadeus Pro, has no difficulty with the parameter to 192000.

  TSK, tsk Apple...

• iPhone 5 s acting weird from the hotmail interface has changed

  Hello

  My 5's mail app iPhone acted as weird as the hotmail Web site interface has changed a few weeks ago. The Junk folder disappeared and now, when I get an email, the phone rings and vibrates as before, but it is there no preview on the lock screen, or the notification Center.

  What is happening to someone else? How can I fix it?

  Thank you

  Hello

  It can help to check your email notification settings:

  • Go to settings > Notifications > mail > select an account to check the notification settings.

  You can also update your iPhone to the latest version of the software (your post indicates that it is not up-to-date):

  • Update the software on your iPhone, iPad or iPod touch - Apple Support iOS

• Audio interface Thunderbolt to crash Windows Boot Camp

  Hello, my audio interface crashes Windows Boot Camp on my MBP 15 "retina. It works very well on the side of the BONE. I've updated everything (including the drivers and firmware for the device). The audio interface is the MOTU 828 x. It is designed for use with Windows via TB - my concern is that this does not mean Boot Camp Windows

  When I turn on the device, Windows crashes immediately on a blue screen saying: "your PC has encountered a problem and needs to restart...» PNP_DETECTED_FATAL_ERROR ". I tried all combinations of plug etc. aside first turned off, turned on mac.

  Thanks for any help or ideas!

  Run a test and reset SMC and NVRAM.

• Hard drives, Interface regularly ejected

  Hi people,

  Since the update to the latest El Capitan (10.11.6), all my external drives and the interface is constantly ejected.  want to go back to the previous version, but the ejected disc always has this version.  Options?

  BOE

  Try disabling put hard drives to sleep even when in energy saver preferences.

  In addition, check with the manufacturer of drive for an update to fix the problem.

• Hello, how is it possible to create the FAT32 BOOTCAMP on CoreStorage partition via the command line interface?

  Hello, how is it possible to create the FAT32 BOOTCAMP on CoreStorage partition via the command line interface?

  I mean ' diskutil cs * " and so on..."

  Yes, you must use the resizeStack command. Please see Re: how to repair fsck "your drive could not be partitioned..." Bootcamp does not as an example.